Molecular emission cavity analysis13-a new flame analytical technique : Part II.The determination of selenium and tellurium

The determination of 0.4–4 μg of selenium by molecular emission cavity analysis is described. Selenium in organic compounds is determined after oxygen flask combustion. Metal ion interferences are eliminated by reduction of selenium to the element, filtration onto a glass-fibre paper, and direct incorporation of the filter into the cavity. Applications to the determination of selenium in inorganic and organic compounds are described. The determination of μg-amounts of tellurium is also outlined.     

Potentiometric microdetermination of aluminium in organic compounds after combustion in a modified oxygen flask

The microdetermination of aluminium in organic compounds by oxygen flask combustion, a simultaneous fusioncombustion procedure was developed, in which the sample in a mixture with KHSO₄ is burnt in a modified oxygen flask under suitable conditions so that the alumina formed is immediately converted into the corresponding water-soluble sulfate. 2.4 ml of 6M HCl are used as absorption solution, in which the combustion residue is completely dissolved by boiling. The solution is then transferred to a titration cell, neutralized with NaOH in the presence of methyl red, and the Al(III) is finally determined in a buffered 40% (V/V) dioxane solution by potentiometric titration with 0.1 M NaF. The results obtained were accurate within ±0.13%; the recoveries of Al are in the range of 99.00 to 99.90%; the standard deviation amounts to 0.06%. The potentiometric titration of Al(III) with fluoride as well as the conditions of the oxygen flask combustion of organic aluminium compounds are discussed.     

Determination of selenium compounds in urine by high-performance liquid chromatography--inductively coupled plasma mass spectrometry

Selenium species, selenite, selenate, selenomethionine (Semet), seneloethionine (Seet) and trimethylselenonium ion (TmSe) were separated in aqueous solution using a gel-permeation (polyvinyl alcohol-based resin) GS-220 column by eluting with 25 mM tetramethylammonium hydroxide and 25 mM malonic acid at pH 7.9. The GS-220 column coupled with inductively coupled plasma mass spectrometry was used for the separation, identification, and quantification of selenium compounds present in certified reference material (CRM) No. 18 human urine from the National Institute for Environmental Studies in Japan (NIES). Spiking of the authentic standard to the urine and use of a silica-based LC-SCX cation-exchange column validated the peak of selenium compounds. High concentrations of chloride and bromide in the urine eluted from the GS-220 column formed molecular ions 40Ar37Cl+ and 81Br1H+ in the plasma, and these molecular ions created additional peaks in the chromatograms when 77Se and 82Se isotopes were monitored respectively. Thus, both the isotopes were selected concurrently for signal monitoring to eliminate the interfering signals. On the LC-SCX column, chloride and bromide were eluted with selenate and complicated its determination, but the peak of TmSe was baseline separated from rest of the Se compounds. Two unknown Se compounds were detected in both the columns. An additional Se compound having the same retention time as that of Semet was detected on the LC-SCX column. Peaks of selenite, selenate, TmSe and unknown selenium compounds in the urine were baseline separated on the GS-220 column, and were free from interferences. Therefore, the GS-220 column was used for the determination of selenium compounds in NIES CRM No. 18. Unknown Se compounds were the predominant selenium species followed by selenite, TmSe and selenate. The estimated value of TmSe as Se, by the standard additions method using the GS-220 column, was 3.42 +/- 0.17 microg l(-1) and was in good agreement with the LC-SCX value [3.38 +/- 0.21 (n=5) microg l(-1)].     

Evaluation of sample preparation methods for elastomer digestion for further halogens determination

In this work, three sample preparation methods were evaluated for further halogen determination in elastomers containing high concentrations of carbon black. Samples of nitrile-butadiene rubber, styrene-butadiene rubber, and ethylene-propylene-diene monomer elastomers were decomposed using oxygen flask combustion and microwave-induced combustion (MIC) for further Br and Cl determination by ion chromatography (IC), inductively coupled plasma optical emission spectrometry (ICP OES), and inductively coupled plasma mass spectrometry (ICP-MS). Extraction assisted by microwave radiation in closed vessels was also evaluated using water or alkaline solution. Digestion by MIC was carried out using 50 mmol l⁻¹ (NH₄)₂CO₃ as the absorbing solution. The effect of the reflux step was also evaluated. Accuracy was evaluated using certified reference materials with polymeric matrix composition and by comparison of results using neutron activation analysis. Agreement for Br and Cl was better than 95% by MIC using 5 min of reflux, and no statistical difference was found using IC, ICP OES, and ICP-MS for determination of both analytes. For MIC, the relative standard deviation (RSD) was lower than 5%. Using extraction in closed vessels, a high amount of residues was observed, and recoveries were lower than 45% for both analytes. For oxygen flask combustion, the agreement was similar using MIC but RSD was higher (20%). The residual carbon content, an important parameter used to evaluate the digestion efficiency, was always below 1% for MIC. Using MIC, it was possible to digest elastomers with high efficiency, resulting in a single solution suitable for halogen determination by different techniques.     

Die Mikrobestimmung von Selen in organischen Verbindungen durch potentiometrische Selenittitration mit Blei (II) unter Verwendung einer blei-spezifischen Elektrode

Zusammenfassung Die Substanz wird in einem Sauerstoffkolben nach Schöniger verbrannt und die Verbrennungsprodukte werden in alkalischer Lösung absorbiert. Nach kurzem Kochen der angesäuerten Lösung zur Entfernung des Kohlendioxids wird das pH der Lösung auf ca. 8 eingestellt und das Selenit in gepuffertem Medium mit 0,01N Bleinitrat potentiometrisch titriert. Eine blei-selektive Indikatorelektrode und eine Bezugselektrode mit KNO₃-Zwischenelektrolyt wurden in Kombination mit einem pH-Meter mit gedehnter Skala zur Erkennung des Titrationsendpunkts verwendet. Die Resultate sind innerhalb ±0,17% genau; die Standardabweichung beträgt 0,08%. Die besten Bedingungen für die Kolbenverbrennung und für die Selenittitration wurden diskutiert.

---

Microdetermination of selenium in organic compounds by potentiometric selenite titration with lead(II) using an ion-selective lead electrode

Summary A new method for the microdetermination of selenium in organic compounds is described. The sample is burnt in an oxygen flask and the products are absorbed in alkaline solution. After a short boiling in acidic medium to eliminate the carbon dioxide, the pH value of the solution is adjusted to about 8 and the selenite titrated in buffered solution potentiometrically with 0.01N lead nitrate. A lead-selective indicator electrode and a double-junction reference electrode are used in combination with an expanded-scale pH-meter to detect the end-point. Accurate results within ±0.17% are obtained; the standard deviation is 0.08%. The best conditions for the oxygen flask combustion and for the selenite titration are discussed.

     

High-performance liquid chromatography-ultrasonic nebulizer high-power nitrogen microwave-induced plasma mass spectrometry, real-time on-line coupling for selenium speciation analysis

The coupling of a high-power nitrogen (N2) microwave-induced plasma (MIP) mass spectrometry--(MS) (1.3 kW) with high-performance liquid chromatography, connected with concentric nebulizer (CN), ultrasonic nebulizer (USN) and a hydride generation (HG) systems, for the optimization and determination of selenium compounds, has been carried out. The MIP-MS system fulfils the ideal requirement being an on-line real-time chromatographic detector for Se speciation analysis. Interchanging of MIP-MS system fabricated nebulizer (concentric) with an ultrasonic nebulizer increases about 3.4-12 (peak height) and 6.5-10 (peak area) times ion signals for the selenium compounds. The detection limits for selenate, selenite, trimethylselenonium ion (TmSe), selenomethionine (Semet) and selenoethionine (Seet) (in Milli-Q-water) obtained with the optimized HPLC-USN-N2MIP-MS system are 0.11, 0.14, 0.09, 0.14 and 0.10 microg L(-1), respectively, about 12-48 times lower than the HPLC-CN-MIP-MS and 1.5-4.4 (peak height) times lower compared to the HPLC-CN-inductively coupled plasma (ICP)-MS coupling. Considering peak area, the repeatability (R.S.D. for three successive analyses) and intermediate precision (R.S.D. for three successive analyses performed on three different days), achieved for five Se compounds are 0.8-5.6, and 1.1-5.9%, comparable with the HPLC-CN-ICP-MS, HPLC-HG-MIP-MS and HPLC-CN-MIP-MS systems. The combined HPLC-USN-N2MIP-MS has been adequately applied for the determination of Se compounds in certified National Institute for Environmental studies human urine CRM No. 18. The results reasonably agree with the HPLC-CN-ICP-MS values. This encouraging combination may be an alternative ion source of mass spectrometry for coming generation in regard to the selenium speciation analysis.     

Quantitative determination of small selenium species in human serum by HPLC/ICPMS following a protein-removal, pre-concentration procedure

Protein precipitation was incorporated into a sample preparation method for the quantitative determination of small "non-protein" selenium species in human serum by high-performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC/ICPMS). The advantages of cleaner matrix and concomitant concentration of the small compounds result in quantification limits in the native serum at the sub-micrograms Se per litre level. Spiking experiments with methyl 2-acetamido-2-deoxy-1-seleno-β-D-galactopyranoside (selenosugar 1), trimethylselenonium ion, selenomethionine, methylselenocysteine (MeSeCys) and selenate yielded recoveries from 73% to 103%. Selenite had a low recovery (44%), possibly owing to protein binding. The validated method was applied to serum samples from two volunteers before and after ingestion of a selenium food supplement. HPLC/ICPMS analysis showed, besides ingested selenate, the presence of selenosugar 1 and trace amounts of MeSeCys and methyl 2-amino-2-deoxy-1-seleno-β-D-galactopyranoside, which have not been reported in human serum before.     

Determination of trace selenium in human plasma and hair with ternary inclusion compound-fluorescent spectrophotometry

A method for determination of selenium in plasma and hair with ternary inclusion compound-fluorescent spectrophotometry has been developed. The determination of selenium in plasma and hair can be performed directly in aqueous solution. Blood and hair samples were destroyed by oxygen flask combustion. The linear range was 10-500 ng mL-1 for plasma and 10-100 ng mL-1 for hair. Within-day and day-to-day precisions for plasma ranged from 5.4% to 9.3% (n = 7) and from 3.5% to 14.5% (n = 7), respectively. Within-day precisions for hair ranged from 0.6% to 6.2% (n = 7). Recoveries ranged from 91.0% to 97.8% for plasma and from 95.0% to 102.0% for hair. The blood samples from 15 Hans and 20 Uygurs in Xinjiang Uygur automatic region and 23 Hans in Liaoning province were collected and determined. It was indicated that no statistically significant difference in plasma selenium concentration of the Hans between Xinjiang and Liaoning was found (F = 1.36, P > 0.05). However, there were statistically significant differences between the Hans and the Uygurs in Xinjiang (F = 1.01, P < 0.01) and between males and females in the two areas (P < 0.01). There was a low correlation between plasma selenium concentration and hair selenium concentration. The ratio of hair selenium concentration to plasma selenium concentration was 2.17, with a range of 1.63-2.88.     

Polarographic microdetermination of halogens in organic compounds after oxygen flask combustion

A method for the microdetermination of organic compounds containing halogens, by a polarographic finish, is reported. After the combustion of the organic sample in the oxygen flask, the products are absorbed in a suitable absorbent and chemically treated to produce Cl(-), Br(-), BrO(3)(-) or IO(3)(-) ions in solution before the polarography. The method is applicable to partially, highly, and fully halogenated aromatic and aliphatic compounds, whether solid or liquid. The results are generally within the acceptable limits of error.     

Selenium speciation in animal tissues after enzymatic digestion by high-performance liquid chromatography coupled to inductively coupled plasma mass spectrometry

A procedure is described for the enzymatic digestion of tuna and mussel samples that allows the determination of selenium species by high-performance liquid chromatography in conjunction with inductively coupled plasma mass spectrometry. The species were extracted by two-step enzymatic hydrolysis with a non-specific protease (subtilisin). The selenium species were separated on a Spherisorb 5 ODS/AMINO column using two different chromatographic conditions, namely phosphate buffers at pH 2.8 and pH 6.0 as mobile phases. The method determines organic (trimethylselenonium, selenocystine, selenomethionine and selenoethionine) and inorganic selenium species (selenite and selenate), but only organic selenium species were found in the samples. The sum of identified selenium species in the sample was about 30% of the total selenium present in the enzymatic extract despite the fact that recoveries of total hydrolysed selenium were 93-102%. Trimethylselenonium ion and selenomethionine were found in both tuna and mussel samples and an unknown selenium species was also found in tuna samples.     

Speciation of selenium compounds with ion-pair reversed-phase liquid chromatography using inductively coupled plasma mass spectrometry as element-specific detection

For selenium speciation analysis, the hyphenation of chromatographic separation with element-specific detection has proved a useful technique. A powerful separation system, which is capable of resolving several biologically and environmentally important selenium compounds in a single column, is greatly needed. However, that has been difficult to achieve. In this paper eight selenium compounds, namely, selenite [Se(IV)], selenate [Se(VI)], selenocystine (SeCys), selenourea (SeUr), selenomethionine (SeMet), selenoethionine (SeEt), selenocystamine (SeCM) and trimethylselenonium ion (TMSe+), were separated by using mixed ion-pair reagents containing 2.5 mM sodium 1-butanesulfonate and 8 mM tetramethylammonium hydroxide as a mobile phase. The separation of these anionic, cationic and neutral organic selenium compounds on a LiChrosorb RP18 reversed-phase column took only 18 min at a flow-rate of 1.0 ml/min with isocratic elution, and baseline separation among the six organic Se compounds was achieved. Inductively coupled plasma mass spectrometry (ICP-MS) was employed as element-specific detection. A comparison of ICP-MS signal intensity obtained with a Barbington-type nebulizer and with an ultrasonic nebulizer (USN) was made. Different signal enhancement factors were observed for the various selenium compounds when a USN was used. The speciation technique was successfully applied to the study on chemical forms of selenium in a selenium nutritional supplement. Selenomethionine was found to be the predominant constituent of selenium in the supplement.     

Microdetermination of fluorine in organic compounds by oxygen flask combustion and conductometric titration

For the conductometric titration of fluoride with calcium acetate, solvent system in sample solution and titrant, concentration, and acidity of sample solution were examined to establish the titration conditions. Results of these examinations were transferred to the microdetermination of fluorine in organic compounds using oxygen flask combustion method.Comparative examination between quartz and Pyrex flasks for the combustion of fluorine samples indicated that good results were obtained by the use of the former flask, whereas the use of the latter one gave negative values of 1.0–1.6% due to the formation of boron fluoride during the combustion.     

Determination of selenium and tellurium compounds in biological samples by ion chromatography dynamic reaction cell inductively coupled plasma mass spectrometry

An ion chromatography-inductively coupled plasma mass spectrometric (IC-ICP-MS) method for the speciation of selenium and tellurium compounds namely selenite [Se(IV)], selenate [Se(VI)], Se-methylselenocysteine (MeSeCys), selenomethione (SeMet), tellurite [Te(IV)] and tellurate [Te(VI)] is described. Chromatographic separation is performed in gradient elution mode using 0.5 mmol L(-1) ammonium citrate in 2% methanol (pH 3.7) and 20 mmol L(-1) ammonium citrate in 2% methanol (pH 8.0). The analyses are carried out using dynamic reaction cell (DRC) ICP-MS. The DRC conditions have also been optimized to obtain interference free measurements of (78)Se(+) and (80)Se(+) which are otherwise interfered by (38)Ar(40)Ar(+) and (40)Ar(40)Ar(+), respectively. The detection limits of the procedure are in the range 0.01-0.03 ng Se mL(-1) and 0.01-0.08 ng Te mL(-1), respectively. The accuracy of the method has been verified by comparing the sum of the concentrations of individual species obtained by the present procedure with the total concentration of the elements in two NIST SRMs Whole Milk Powder RM 8435 and Rice Flour SRM 1568a. The selenium and tellurium species are extracted from milk powder and rice flour samples by using Protease XIV at 70 degrees C on a water bath for 30 min.     

Optimization of a chemical modifier in the determination of selenium by graphite furnace atomic absorption spectrometry and its application to wheat and wheat flour analysis.

A method for the determination of total selenium in wheat and wheat flour using graphite furnace atomic absorption spectrometry (GFAAS) with palladium/ascorbic acid as a chemical modifier was studied. The effects of nickel nitrate, palladium/ascorbic acid, and palladium/magnesium nitrate as chemical modifiers on the sensitivity in the determination of selenite, selenate and selenomethionine by GFAAS were compared. The palladium/ascorbic acid modifier was used for the determination of total selenium in wheat and wheat flour, because the oxidation states of the selenium ion are not important in the determination. The detection limit was estimated to be 1 microg L(-1) (calculated as 3sigma of the blank); the calibration curve was linear for the concentration range 5 - 50 microg L(-1) and the recovery range was 96.66 - 101.80%. The optimal ashing and atomizing temperatures were 1300 degrees C and 2250 degrees C, respectively. The proposed method was successfully applied to the determination of total selenium in wheat and wheat flour.     

Negative Thermionen-Massenspektrometrie von Selen

Summary Negative thermal ionization is used to determine the selenium isotope ratios in a double-filament ion source. A thin film of barium hydroxide on the rhenium ionization filament is applied to increase the Se^– thermal ion current. The produced Se^– ion beam is by a factor of about four higher when selenious acid instead of barium selenite or sodium selenate is used. A strong dependence of the ion current on the temperature of the ionization filament is found showing the maximum ion intensity at temperatures of 970–1000 C. The different selenium isotope ratios of samples with natural isotopic abundance can be determined with relative standard deviations of 0.3–0.6%. This reproducibility is a good basis to improve the accuracy of the selenium atomic weight in the future by a calibrated measurement. An enriched ⁸²Se spike is used to analyse selenium traces in aquatic systems with isotope dilution mass spectrometry down to the pg/g level. In the concentration range of 4–23 ng/g the selenium content is determined with relative standard deviations of 0.1–5%. The results agree well with those obtained with a hydride generation atomic absorption system. It is shown that the described method of isotope dilution mass spectrometry analyses the sum of the inorganic species selenate, selenite and selenide, but not volatile organic selenium compounds.

---

---

Herrn Prof. Dr. W. Fresenius zum 75. Geburtstag gewidmet     

On-line focused microwave digestion-hydride generation of inorganic and organic selenium: Total determination and inorganic selenium speciation by atomic absorption spectrometry

An on-line FIA pretreatment with HBr/KBrO₃, assisted by on-line focused microwave-induced digestion, has been coupled with hydride generation-atomic absorption spectrometry (HG-AAS) for final detection for total selenium determination. This total selenium determination is virtually independent of the different Se species investigated (selenite, selenate, selenomethionine, selenoethionine and selenocystine). Detection limits of 0.8 μg l⁻¹ of Se can be achieved by AAS with precisions better than 5%. This continuous flow system for selenium determination allows a high sample throughput (about 30 samples h⁻¹ can be analyzed) in which high automation can be achieved and constitutes a convenient real-time continuous detector for the different selenocompounds tested. Direct non-chromatographic speciation of inorganic selenium (selenite and selenate in their mixtures) is demonstrated by simple on-off operation of the focused microwaves connected in the flow system.

Validation of this simple on-line FIA system has been carried out by analyzing total Se recovered from spiked tap waters and by speciating mixtures of Se(IV) and Se(VI) spiked to the same samples. The fast conversion of Se compounds into volatile selenium could be considered as a sort of specific “general” detector for Se compounds which can be extremely useful for Se speciation by hybrid chromatographic techniques.     

Speciation analysis of arsenic and selenium compounds in environmental and biological samples by ion chromatography-inductively coupled plasma dynamic reaction cell mass spectrometer

An inductively coupled plasma mass spectrometer (ICP-MS) was used as an ion chromatographic (IC) detector for the speciation analysis of arsenic and selenium. The arsenic and selenium species studied included arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB), selenite [Se(IV)] and selenate [Se(VI)]. Gradient elution using (NH₄)₂CO₃ and methanol at pH 9 allowed the chromatographic separation of all species in less than 12 min. Effluents from the IC column were delivered to the nebulization system of ICP-DRC-MS for the determination of arsenic and selenium. The potentially interfering ³⁸Ar⁴⁰Ar⁺ and ⁴⁰Ar⁴⁰Ar⁺ at the selenium masses m/z 78 and 80 were reduced in intensity by approximately 3 orders of magnitude by using 0.6 mL min⁻¹ CH₄ as reactive cell gas in the DRC while an Rpq value of 0.3 was used. Meanwhile, arsenic was determined as the adduct ion ⁷⁵As¹²CHH⁺ at m/z 89, which is more sensitive than ⁷⁵As. The limits of detection for arsenic and selenium were in the range of 0.002–0.01 ng mL⁻¹ and 0.01–0.02 ng mL⁻¹, respectively, based on peak height. The relative standard deviation of the peak areas for five injections of 5 ng mL⁻¹ As and Se mixture was in the range of 2–4%. The concentrations of arsenic and selenium species have been determined in urine samples collected locally. The major As and Se species in urines were AsB, DMA and probably selenosugar at concentration of 20–40, 15–19 and 17–31 ng mL⁻¹, respectively. The recoveries were in the range of 94–105% for all the determinations. This method has also been applied to determine various arsenic compounds in two fish samples. In this study, a simple and rapid microwave-assisted extraction method was used for the extraction of arsenic compounds from fish. The arsenic species were quantitatively leached with an 80% v/v methanol solution in a focused microwave field during a period of 5 min.     

A new reagent for the detection and determination of small amounts of the sulphate Ion

An aqueous solution of 2-aminoperimidine hydrochloride is proposed as a new reagent for the detection and determination of the sulphate ion. As little as 0.05 p.p.m. can be detected by precipitation of the corresponding amine sulphate. Suspensions of the precipitate show remarkable stability and no colloidal stabilizers are needed. The reagent is applied to the nephelometric determination of 0.1–5 p.p.m. of sulphate ion; at the 0.5 p.p.m. level, the relative standard deviation is 4.5%. Although many ions form precipitates with the reagent at high concentrations, very few of the common anions provide significant interference in the nephelometric determination. The reagent seems promising for the determination of sulphate in natural waters, and for traces of sulphur in organic compounds after oxygen flask combustion.     

New iodometric methods for the microdetermination of arsenic in organic compounds

New methods are described for the iodometric microdetermination of arsenic in organic compounds after wet digestion or oxygen flask combustion. After evaporation of the arsenic solution to dryness and dissolution of the residue in water, acetone is added and the solution is treated with iodide-iodate and the iodine liberated (by the interfering acids and the first dissociation step of arsenic acid) is reduced with thiosulphate. The KH(2)AsO(4) left is then reacted with zinc sulphate in presence of excess of KI and KIO(3). Acetone is added and the liberated iodine is titrated with thiosulphate. This titration corresponds to the second and third dissociation steps of arsenic acid and is used to calculate the arsenic content of the compound. When arsenicals not containing sulphur are decomposed by the oxygen flask method, the arsenic acid solution obtained is reacted directly with zinc sulphate in presence of KI and KIO(3) and the iodine released is titrated with thiosulphate. In this case, the titration corresponds to all three dissociation steps of arsenic acid. The average recoveries obtained by the two methods are 99.5 and 99.9%, respectively.     

Determination of sulfur in organic compounds using a barium-selective electrode

A procedure was developed for determining sulfur (>1.5 abs %) in sulfur-containing organic compounds. The procedure was based on the combustion of a sample portion in a flask filled with oxygen followed by the potentiometric titration of sulfate ions with barium nitrate in a water-acetone solution. In distinction from analogous procedures, halogens and metals contained in the analyzed compound did not interfere with the determination of sulfur. The error of determination was below 3 rel %.