N-functionalization of poly(ethylene glycol)-linked mono- and bis-dioxocyclams as potential ligands for Gd3+

A number of highly functionalized dioxocyclams with acetic acid side chains on the secondary amine sites and ethylene glycol side chains on 6 and 13-positions (12a, 12b) or a tetra(ethylene glycol) side chain linking the 6 and 13 positions (15) were synthesized and characterized, as was a bis-dioxocyclam bridged across the 6 and 13 positions by tetra(ethylene glycol) groups (16). These were screened for their ability to complex Gd3+. Only ligands 15 and 16, having tetra(ethylene glycol) groups, formed such complexes.     

Shielded alkyl-functionalised rotaxane host cavities for improved anion recognition

The synthesis and anion recognition properties of four novel [2]rotaxane host architectures containing additional alkyl functionality integrated within macrocyclic and axle components to shield the binding cavity from the solvent are described. The rotaxane species containing a tetra(methyl)-functionalised macrocycle component is found to be a weaker anion complexant than the equivalent unfunctionalised receptor, which is likely due to steric hindrance restricting the anion's access to the interlocked cavity. Rotaxane molecules containing tetra(methyl)-functionalised axle components are also investigated, and the additional alkyl functionality serves to enhance anion binding affinity and selectivity when incorporated within the axle's flexible ethylene linkages. Moreover, the equivalent unfunctionalised rotaxane displays a rare preference for oxoanions over chloride guest species.     

A molecular switch based on acid and base promoted, cation governed binding in a crown ether threaded rotaxane

A rotaxane, containing both oligo ethylene glycol and secondary ammonium cation binding sites for a threaded crown ether, has been prepared. ¹H NMR spectroscopy has been used to show that the crown ether moiety in the rotaxane undergoes acid-base and alkali metal cation dependent switch from binding at the ammonium cation position to cooperative binding to the metal cation at the oligo ethylene glycol site.     

Mono,di, tri and tetraethylene glycol: Spectroscopic characterization using density functional method and experiment

We report infrared and electronic absorption spectra of mono, di, tri and tetra ethylene glycol (EG) in gas phase, their cation and anion and in water solvent using density functional theory calculations at B3LYP/TZVP level. Structural paramaters, rotational and centrifugal distortional constants and dipole moments are also reported. A siginificant shifts in vibrational frequencies and peaks in electronic absorption spectra have been observed upon ionization of mono, di, tri and tetra ethylene glycols. We have also obtained experimental vibrational spectrum of monoethylene glycol. Vibrational frequencies of mono ethylene glycol from theory and experiment are compared. We have used integral equation formalism polarizable continuum model (IEFPCM) model to study the influence of water solvent on vibrational frequencies of neutral mono, di, tri and tetra ethylene glycol. Electronic absorption spectra for these molecules have been obtained using Time dependent density functional theory (TDDFT).     

New deuterated oligo(ethylene glycol) building blocks and their use in the preparation of surface active lipids possessing labeled hydrophilic tethers

For the introduction of additional analysis protocols of tethered molecules, a method is presented to prepare functionalized, deuterated oligo(ethylene glycols) from ethylene glycol-d4. Partial oligomerization of ethylene glycol-d4 and conversion to ditosylates is accompanied by coupling reactions to prepare doubly benzyl protected oligo(ethylene glycols) with two to five repeating units. The tetramer bearing 16 deuteria was elaborated at both ends to eventually prepare 2,3-di-O-phytanyl-sn-glycerol-1-tetraethylene glycol-d,l-alpha-lipoic acid ester (DPTL), which bears a fully deuterated tetra(ethylene glycol) spacer group. Through linking of functionalized components, an analogue of DPTL possessing an octa(ethylene glycol) spacer group was prepared, both in deuterated and unlabeled form.     

Ultrafast dynamics of liquid poly(ethylene glycol)s and crown ethers studied by femtosecond Raman-induced Kerr effect spectroscopy

Ultrafast molecular dynamics of liquid poly(ethylene glycol)s, tetra(ethylene glycol), penta(ethylene glycol), and poly(ethylene glycol) with the molecular weight of 600, and crown ethers, 12-crown-4 and 15-crown-5, have been investigated by means of femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy. Picosecond Kerr transients of poly(ethylene glycol)s and crown ethers are characterized by a biexponential function with the time constants of about 2 and 20 ps. Both the faster and slower time constants do not vary much among the five oligo(ethylene oxide)s. Femtosecond dynamics is discussed based on the Kerr (depolarized Raman) spectra obtained by Fourier transform deconvolution analysis of the high time resolution Kerr transients. The broad low-frequency band (0-200 cm(-1)) in the Kerr spectrum is analyzed by two Brownian oscillators. The spectral shapes of linear poly(ethylene glycol) and cyclic crown ether are very different. Both the low- and high-frequency Brownian oscillators for crown ethers show lower frequency and broader spectral features than those for poly(ethylene glycol)s. The comparison of the low-frequency spectra of poly(ethylene glycol)s and crown ethers shows that the low-frequency spectrum of 15-crown-5 is closer to that of poly(ethylene glycol)s than that of 12-crown-4 is. The difference of the low-frequency spectra between poly(ethylene glycol) and crown ether is discussed with the concepts of molecular conformation and liquid density. The features of the observed intramolecular vibrational bands are also correlated with the molecular conformations.     

Development of novel polymer-type dehydrocondensing reagents comprised of chlorotriazines

A novel immobilized dehydrocondensing reagent comprised of a triazine-type dehydrocondensing reagent itself in a polymerized form was synthesized by copolymerization between tetra(ethylene glycol) bis(dichlorotriazinyl) ether and tris(2-aminoethyl)amine.     

Biocompatible polystyrenes containing pendant tetra(ethylene glycol) and phosphorylcholine groups

The synthesis and characterization of styrene‐based polymers and copolymers containing pendant tetra(ethylene glycol) and phosphorylcholine groups is reported. These polymers are obtained via radical polymerization reactions using α,α′‐azobis(isobutyronitrile) as the initiator, and are developed as protective biocompatible coatings for implantable biosensors. Cell morphology studies show that none of the synthesized polymers and copolymers are toxic, and that the rate of cell growth can be tuned by changing the monomer composition. The presence of tetra(ethylene glycol) groups in the coatings lowers the protein adsorption, thereby influencing the rate of cell growth. An equally profound effect is observed when a low percentage of phosphorylcholine groups is present in the polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 468–474, 2001     

Temperature‐sensitive hyperbranched poly(glycidol)s with oligo(ethylene glycol) monoethers

Temperature‐dependent polymers are intelligent materials. In this study, biocompatible and temperature‐dependent hyperbranched poly(glycidol)s (HPGs) were synthesized and characterized. HPGs were succinylated then modified with the oligo(ethylene glycol) monoethers (OEG) for example methoxy di(ethylene glycol), methoxy tri(ethylene glycol), methoxy tetra(ethylene glycol), ethoxy di(ethylene glycol), ethoxy tri(ethylene glycol), and methoxy poly(ethylene glycol)s at different ratios. These polymers exhibited phase transitions at a specific temperature (the cloud point), depending on the composition of OEG. By tuning the composition of OEG in the polymer, thermosensitive polymers with cloud point near body temperature were produced. Endothermic peaks of these polymers were observed in the vicinity of the cloud point. It is suggested that at temperatures below the cloud point the polymers formed hydrophobic shells and became more hydrophobic at temperatures above the cloud point. Because they exhibited no cytotoxicity, these temperature‐sensitive polymers are useful for biomedical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4047–4054, 2010     

Poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers: preparation and aqueous solution properties

A series of water-soluble, amphiphilic graft copolymers has been prepared by free-radical copolymerization of methoxypoly(ethylene glycol) macromonomers, with either methyl methacrylate or butyl methacrylate as the comonomers, in water/ethanol solvent mixtures. Lower molecular weight copolymers were obtained by increasing the concentration of the initiator, azobisisobutyronitrile (AIBN), used in the polymerization reaction. However, the route used also led to the formation of significant quantities of tetramethylsuccinodinitrile, a toxic byproduct resulting from the cage reaction of AIBN. Static fluorescence measurements using pyrene as a probe, along with 1H NMR experiments, showed that the graft copolymers form aggregates in water at very low concentrations (approximately 0.01 g l(-1)) with the pendant hydrophilic graft chains forming a stabilizing shell around the hydrophobic backbone. An increase in the hydrophile-lipophile balance of the graft copolymers was found to lead to smaller aggregates with lower aggregation numbers and highly swollen hydrophilic shells, as revealed by small angle neutron scattering (SANS).     

Guests of differing polarities provide insight into structural requirements for templates of water-soluble nano-capsules

Guests covering a range of polarities were examined for their ability to bind to a water-soluble cavitand and trigger its assembly into a supramolecular capsule. Specifically the guests examined were: tridecane 2, 1-dodecanol 3, 2-nonyloxy ethanol (ethylene glycol monononyl ether) 4, 2-(2-hexyloxyethoxy) ethanol (di(ethylene glycol) hexyl ether) 5, 2-[2-(2 propoxyethoxy)ethoxy] ethanol (tri(ethylene glycol) propyl ether) 6, and bis [2-(2-hydroxyethoxy)ethyl] ether (tetra(ethylene glycol)) 7. In this series, guest 6 proved to signify the boundary between assembly and the formation of 2:1 complexes, and simple 1:1 complexation. Thus, guests 2-5 formed relatively kinetically stable capsules, guest 6 formed a capsule that was unstable relative to the NMR timescale, and guest 7 formed a simple 1:1 complex.     

聚苯乙烯负载聚乙二醇在合成碳酸亚丙酯上的应用

用金属钾、金属钠以及氢氧化钠水溶液等方法制备聚苯乙烯负载聚乙二醇，结果表明，采用金属钾比金属钢具有更好的接枝效果，并能使反应在较低的温度下较快进行。在氢氧化钠溶液中添加少量相转移剂，如Bu4NBr，接枝效果也有所提高。以聚苯乙烯负载聚乙二醇和KI一起为催化剂，研究了溶剂、温度等因素对CO2与环氧丙烷合成碳酸亚丙酯催化活性的影响。结果表明，以甲醇为溶剂催化活性较高。研究还表明，聚苯乙烯负载聚乙二醇具有较好的热稳定性，可以在150℃下重复使用至少5次。     

A neutral, water-soluble olefin metathesis catalyst based on an N-heterocyclic carbene ligand

A water-soluble ruthenium-based olefin metathesis catalyst supported by a poly(ethylene glycol) conjugated N-heterocyclic carbene ligand is reported. The catalyst displays greater activity in aqueous ring-opening metathesis polymerization (ROMP) reactions than previously reported water-soluble metathesis catalysts.     

A molecular shuttle for driving a multilevel fluorescence switch

A [2]rotaxane-based molecular shuttle comprised a macrocycle mechanically interlocked to a chemical "dumbbell" has been prepared in high yields by a thermodynamically controlled, template-induced clipping procedure. This molecular shuttle has two different recognition sites, namely, -NH2 +- and amide, separated by a phenyl unit. The macrocycle exhibits high selectivity for the -NH2+- recognition sites in the protonated form through noncovalent interactions, which include 1) N+-H...O hydrogen bonds; 2) C-H...O interactions between the CH2NH2+CH2 protons on the thread and the oligo(ethylene glycol) unit in the macrocycle; 3) pi...pi stacking interaction between macrocycle and aromatic unit. Upon deprotonation of the [2]rotaxane the macrocycle glides to the amide recognition site due to the hydrogen bonds between the -CONH- group and the oligo(ethylene glycol) unit in the macrocycle. The deprotonation process requires about 10 equivalents of base (iPr2NEt) in polar acetone, while the amount of base is only 1.2 equivalents in apolar tetrachloroethane. Upon addition of Li+, the conformation of the [2]rotaxane was altered as a result of the collective interactions of 1) hydrogen bonds between pyridine nitrogen and amide hydrogen atoms; 2) coordination between the oligo(ethylene glycol) unit, amide oxygen atom and Li+ cation. Then, when Zn2+ ions are added, the macrocycle returns to the deprotonated -NH- recognition site owing to coordination of the macrocycle and -NH- from the axle with the Zn2+ ion. All the above-mentioned movement processes are reversible through the alternate addition of TFA/iPr2NEt, Li/[12]-crown-4 and Zn2+/ethylenediaminetetraacetate (EDTA), by virtue of hydrogen bonding and metal-ion complexation. Significantly, the three independent movement processes are all accompanied by fluorescent responses: 1) complete repression in the protonated form; 2) low-level expression in the deprotonated form; 3) medium-level expression following addition of Li+; 4) high-level expression on complexation with Zn2+.     

利用可逆共价键pH响应性制备聚轮烷

合成了具有可逆酰腙键的2,4-二硝基苯甲醛封端的哑铃型聚乙二醇衍生物. 在60 ℃时将水溶液的pH值调节至酸性, 哑铃型聚合物上的酰腙键发生可逆的“断开”和“生成”. 在这个可逆过程中, 溶液中的α-环糊精逐步与聚乙二醇内含复合. 由于环糊精具有较强疏水作用的内部空腔, 可以与聚乙二醇形成稳定的内含结晶复合物, 在这种超分子作用力下, 哑铃型聚乙二醇衍生物的分子链上会动态地穿入更多的α-环糊精, 最终形成聚轮烷. 综合液体核磁共振、粉末X射线衍射、固体碳-13交叉极化/魔角自旋核磁共振及差示扫描量热分析结果证明, 这种利用可逆共价键pH响应性制备聚轮烷的方法是可行的. 与传统的聚轮烷制备方法不同, 这种利用动态的可逆共价键制备聚轮烷的方法并不需要预先合成准(聚)轮烷.     

Synthesis of a pH‐Sensitive Hetero[4]Rotaxane Molecular Machine that Combines [c2]Daisy and [2]Rotaxane Arrangements

The synthesis of a novel pH‐sensitive hetero[4]rotaxane molecular machine through a self‐sorting strategy is reported. The original tetra‐interlocked molecular architecture combines a [c2]daisy chain scaffold linked to two [2]rotaxane units. Actuation of the system through pH variation is possible thanks to the specific interactions of the dibenzo‐24‐crown‐8 (DB24C8) macrocycles for ammonium, anilinium, and triazolium molecular stations. Selective deprotonation of the anilinium moieties triggers shuttling of the unsubstituted DB24C8 along the [2]rotaxane units.     

Effect of oxyethylene groups on the behaviour of thermodynamic properties of pyrrolidin-2-one and poly(ethylene glycols)

Dilatometric measurements of excess volume V^E and ultrasonic speed u have been carried out for mixtures of mono-, di-, tri- and tetra(ethylene glycol)s in pyrrolidin-2-one (PY) over the whole mole fraction range at 303.15 K. In the mixture of PY and monoethylene glycol, the V^E is positive except for slight negative variation at the high mole fraction of PY. The other three mixtures PY + di-, + tri- and + tetra(ethylene glycol)s show negative V^E over the entire composition range in the order di-u with increase in the mole fraction of PY in the case of monoethylene glycol while for other three systems u rises. From these measurements, partial molar quantities V_i^E and K_S,i^E have been calculated and analysed. Estimates of isentropic molar quantity K_S equal to −(∂V/∂p)_S and its excess counterpart K_S^E have also been computed. The K_S^E is positive for mono-, and negative for all the other mixtures over the whole composition range.     

One-pot synthesis of recyclable palladium catalysts for hydrogenations and carbon-carbon coupling reactions

Palladium nanoparticles were generated from tetrakis(triphenylphophine)palladium in a mixture of tetra(ethylene glycol) and tetramethoxysilane (or titanium(IV) isopropoxide), then encapsulated in silica matrix (or titania matrix) by the treatment with water. The resulting heterogeneous material showed high catalytic activity in the hydrogenations of various alkene and alkynes and in the carbon-carbon cross-coupling reactions such as the Suzuki-Miyaura, the Sonogashira, the Heck-Mizoroki, and the Stille reactions.     

Highly water-soluble neutral BODIPY dyes with controllable fluorescence quantum yields

A series of novel highly water-soluble neutral BODIPY dyes have been obtained by functionalization of BODIPY dyes with branched oligo(ethylene glycol)methyl ether groups at positions 8, 2 and 6 or 4 and 4'. Use of an ortho-substituent group of branched oligo(ethylene glycol)methyl ether on the meso-phenyl ring of BODIPY dyes and replacement of the fluorine atoms of BODIPY dyes at positions 4 and 4' with methyloxy or ethynyl subunits significantly enhance fluorescence quantum yields of BODIPY dyes.     

Highly water-soluble,near-infrared emissive BODIPY polymeric dye bearing RGD peptide residues for cancer imaging

Near-infrared emissive BODIPY polymeric dye bearing cancer-homing cyclic arginine–glycine–aspartic acid (RGD) peptide residues (polymer B) was prepared by post-polymerization functionalization of BODIPY polymeric dye bearing bromo groups through tetra(ethylene glycol) tethered spacers (polymer A) with thiol-functionalized RGD cancer-homing peptide through thioether bonds under a mild basic condition. Polymer B possesses excellent water solubility, good photostability, biocompatibility and resistance to nonspecific interactions to normal endothelial cells, and can efficiently detect breast tumor cells through specific cooperative binding of cancer-homing RGD peptides to αvβ3 integrins of cancer cells while its parent polymer A without RGD residues fails to target cancer cells.