钙钛矿型LaxSr1－xNi1－yCoyO3光电催化活性研究

用甘氨酸-硝酸盐燃烧合成法, 制备La_xSr_1－xNi_1－yCo_yO₃复合氧化物的陶瓷粉末, 对钙钛矿氧化物进行了XRD结构分析. 在通氧或不通氧下测试氧还原和氧析出的循环伏安曲线. 结果表明: 该氧电极具有双功能催化特性, 但不完全可逆. 利用汞灯作为激发光源, 进行几种水溶性染料和五种混合染料光解实验, 利用紫外-可见、红外以及人工神经网络光度法研究La_xSr_1－xNi_1－yCo_yO₃的催化性能. 结果表明: La_xSr_1－xNi_1－yCo_yO₃ (x＝0.7, 0.9, 1; y＝0.3, 0.75)复合氧化物都具有较强光催化特性; La_xSr_1－xNi_1－yCo_yO₃的光催化活性高于La_xSr_1－xNiO₃, 这与B位离子(Ni^2—, Co^2－)的电子构型有关; Co^2＋的加入可使La_xSr_1－xNiO₃的光催化活性有所提高.     

空气中合成固溶体荧光粉Ba2(Zn, Mg)Si2O7:Ce3+,Eu2+,Eu3+及其发光特性

采用高温固相法在空气中合成了Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu,yCe³⁺系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu²⁺离子的4f⁶5d¹-4f⁷跃迁,590~725 nm红光区窄带谱源于Eu³⁺的⁵D₀-⁷F_J (J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu³⁺在Ba_1.97-yZn_1-xMg_xSi₂O₇基质中被还原成了Eu²⁺;当x=0.1时,荧光粉Ba_1.97Zn_0.9Mg_0.1Si₂O₇:0.03Eu的绿色发光最强,表明Eu³⁺被还原成Eu²⁺离子的程度最大。当共掺入Ce³⁺离子后,形成Ba_1.97-yZn_0.9Mg_0.1Si₂O₇:0.03Eu,yCe³⁺荧光粉体系,其发光随着Ce³⁺离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba_1.96Zn_0.9Mg_0.1Si₂O₇:0.01Ce³⁺,0.03Eu的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba₂Zn_0.9Mg_0.1Si₂O₇基质中的能量传递与发光机理。     

CeCl3-CdCl2-H2O和CeCl3-CdCl2-HCl-H2O的相平衡

测定了三元系CeCl₃-CdCl₂-H₂O (25 ℃)和四元系CeCl₃-CdCl₂-HCl(～8.4％)-H₂O(25 ℃) 的相平衡溶度数据,绘制了相应的溶度图.该三元系是由5个固相区CdCl₂&;#8226;2.5H₂O(原始盐)、CdCl₂&;#8226;H₂O(原始盐)、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O、4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O、CeCl₃&;#8226;7H₂O(原始盐)组成的复杂体系.该四元系是由5个固相区CdCl₂&;#8226;H₂O(原始盐)、9CdCl₂&;#8226;CeCl₃&;#8226;19H₂O、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O、4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O、CeCl₃&;#8226;7H₂O(原始盐)组成的复杂体系.其中6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O在该三元系是介稳化合物.9CdCl₂&;#8226;CeCl₃&;#8226;19H₂O 、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O和4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O用X射线粉末衍射及TG-DTG和DSC等方法进行了研究,并对X射线粉末衍射进行了指标化.     

纳米钙钛矿LaxSr1-xFe1-yCoyO3复合氧化物的制备和表征

用甘氨酸-硝酸盐燃烧合成法，制备La_xSr_1-xFe_1-yCo_yO₃复合氧化物的陶瓷粉末，对该钙钛矿型氧化物进行了XRD、IR、紫外漫反射光谱及循环伏安曲线分析。结果表明：该复合氧化物粉体平均晶粒为15.3～29.8 nm,为立方和正交晶系。该氧电极具有双功能催化特性，但不完全可逆。对水溶液染料进行光解实验，利用紫外-可见、人工神经网络光度法研究La_xSr_1-xFe_1-yCo_yO₃的催化性能。结果表明：CO²⁺的加入可使La_xSr_1-xFeO₃的光催化活性有所提高，B位离子(Fe³⁺，CO²⁺)改变与加入，使La_xSr_1-xFe_1-yCo_yO₃(x=0.7，0.3；y=0.3，0.9，1)光催化活性高于La_xSr_1-xFeO₃。同时，对5种染料进行紫外光解，在0.75 h，脱色率大于91%，并为动力学一级反应。     

层状O2结构锂锰氧化物Li0.60[MgxCoyMn1-x-y]O2的制备及结构表征

本文采用离子交换法分别制备了双复合锂锰氧化物Li_0.60[Mg_xMn_1-x]O₂(0.05 ≤ x ≤ 0.15)和三复合锂锰氧化物Li_0.60[Mg_xCo_yMn_1-x-y]O₂(x=0.05，0.05 ≤      

La-Ce对PbTiO3陶瓷气相扩渗生成La2Ti6O15CeTi21O38的陶瓷材料及其电性能

报道了采用气相法对PbTiO₃陶瓷扩渗La-Ce混合稀土元素的研究. 在气相扩渗过程中, La, Ce与PbTiO₃陶瓷组元发生了复杂反应,生成了稀土化合物La₂Ti₆O₁₅和CeTi₂₁O₃₈, 制备出未见报道的La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料, 经测试其导电性能发生了十分显著的变化. La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料的室温电阻率从2.0 ×10¹⁰ W·m下降为0.248 W·m,而且随着温度的变化, 晶粒电阻呈现明显的PTCR效应,而晶界电阻随着温度的升高,呈急剧连续降低状态,总电阻的变化规律与晶界电阻的变化相一致, 试样总电阻的PTCR效应已不存在, 近趋导体. 经XPS测试分析, 进一步证实了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料中铅、钛等元素均有变价, 因而导致了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料电阻率的降低, 测试结果还首次给出了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料中各元素结合能位置的峰值. TG-DTA热分析表明La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料具有较好的高温热稳定性.     

o-ZrW1.6Mo0.4O8·H2O正交相的合成与表征

The precursor ZrW_1.6Mo_0.4O₇(OH)₂(H₂O)₂ was characterized by IR and XRD methods. δ′-ZrW_1.6Mo_0.4O₈ was prepared by careful controlling the annealing conditions from the precursor and was determined to have the formula as o-ZrW_1.6Mo_0.4O₈·H₂O by TG-DSC, IR, and XRD methods. The relation between o-ZrW_1.6Mo_0.4O₈·H₂O and o-ZrW_1.6Mo_0.4O₈ was discussed through variable temperature XRD patterns. Further more, the mechanism of the precursor dehydration was suggested.     

298.15 K Li2B4O7-MgCl2-H2O体系热力学性质的电动势法测定及离子相互作用模型的研究

测定了298.15 K下, 无液接电池Li-ISE│Li₂B₄O₇ (m_A)(aq.), MgCl₂(m_B)(aq.)│AgCl/Ag的电动势, 利用测定结果计算了Li₂B₄O₇-MgCl₂-H₂O体系离子强度在0.05～3 mol•kg^－1范围内, 不同MgCl₂离子强度分数的溶液中LiCl的平均活度系数, 并给出了其随离子强度I, B₄O₇^2－和Mg^2＋浓度的变化规律. 结合以往关于该体系和Li₂B₄O₇-LiCl-H₂O, Li₂B₄O₇-H₂O体系的等压研究结果, 用迭代和多元线性回归方法对Li^＋-Mg^2＋-Cl^－-B₄O₇^2－-H₂O体系的离子相互作用模型进行了研究. 具体方法为考虑了该体系在不同的总硼浓度范围H₃BO₃, B(OH)₄^－, B₃O₃(OH)₄^－和B₄O₅(OH)₄^2－四种含硼化合物的存在以及各硼化合物间的化学平衡, 以修正了的Pitzer渗透系数方程和活度系数方程为基础, 对该体系的等压法和电动势法研究结果进行最小二乘拟合, 拟合的标准偏差为0.0167, 用该模型计算的该体系的渗透系数、活度系数与实验值基本一致.     

由大环配体[As4W40O140]28-与NiII形成的新型超大杂多化合物

在pH = 4.0的水溶液中, NiCl₂·6H₂O, NH₄Cl与Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O反应, 得到了新的杂多砷钨酸盐(NH₄)₂₀[Na₂(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·61H₂O单晶, 用X射线单晶衍射法及元素分析确定了其结构, 晶体属三斜晶系, P¹空间群; 其晶胞参数为: a = 1.33135(18), b = 1.9722(3), c = 3.6430(5) nm, α = 78.010(2)°, β = 82.145(2)°, γ = 74.385(2)°, V = 8.978(2) nm3, Z = 2, R1 = 0.0512, wR2 = 0.0684 (I > 2σ). 在聚阴离子[Na₂(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]^20-中, 2个Ni²⁺和2个Na⁺分占大环配体[As₄W₄₀O₁₄₀]^28-内的4个S2空位, 每个S2位提供4个O_d向金属离子配位, 2个Ni²⁺的配位数为6, 两个Na⁺的配位数分别为5和6, 另一个Ni²⁺处于环外, 与[As₄W₄₀O₁₄₀]^28-的一个端基氧(O_d)桥连成键, 其配位数为6.     

Ce1－xNdxO2－δ固溶体的电子顺磁共振谱和阻抗谱的研究

利用溶胶-凝胶方法在800 ℃焙烧10 h后, 合成了固溶体Ce_1－xNd_xO_2－δ (x＝0.05～0.55), X射线衍射(XRD)测试表明固溶体已经形成立方萤石结构; 电子顺磁共振谱(EPR)研究表明在固溶体Ce_1－xNd_xO_2－δ中随着掺杂量x的增大, Ce^3＋离子含量减少, 说明掺杂Nd^3＋离子可以抑制Ce^4＋的还原; 交流阻抗谱的测量表明固溶体Ce_0.9Nd_0.1O_2－d 具有离子导电特性, 600和700 ℃时的电导率分别为4.25×10^－3和1.12×10^－2 S•cm^－1, 活化能为0.68 eV.     

25,26,27,28-羟乙氧基-杯[4]芳烃的合成

以对叔丁基苯酚为原料,经4步反应合成了新的杯[4]芳烃衍生物--25,26,27,28-羟乙氧基-杯[4]芳烃,其结构经~1H NMR和MS表征.     

有机催化蒽酮与β-硝基烯烃的不对称Michael加成反应

将金鸡纳生物碱衍生物用于催化蒽酮和β-硝基芳基乙烯的不对称Michael加成反应。 考察了溶剂、温度及催化剂用量对反应催化性能的影响。 结果表明,最佳条件为5%(摩尔分数)催化剂1b、甲苯为溶剂、0 ℃反应,得到了91%~99%的化学产率和最高达95%ee的对映体选择性。     

5,12-环氧-1,2,3,4,5,12-六氢-2-并四苯基甲基酮的合成研究

蒽环类抗生素是近年来颇受人们注意的抗肿瘤药物。其配糖体蒽环酮的化学合成也引起了有机化学工作者极大的兴趣。本工作报道了蒽环酮的重要前体——b,12-环氧-1,2,3,4,5,12-六氢-2-并四苯基甲基酮(1)的合成。 1是以2,3,5,6-四甲     

Preparation of uniformly sized molecularly imprinted polymers for phenolic compounds and their application to the assay of bisphenol A in river water.

Uniformly sized molecularly imprinted polymers, which can recognize bisphenol A (BPA), have been prepared by a multi-step swelling and polymerization method using BPA or a structurally related analogue of BPA [p-t-octylphenol (OP) or p-t-butylphenol (BP)] as the template molecule, 4-vinylpyridine as the functional monomer, and ethylene glycol dimethacrylate as the cross-linker. The BP-imprinted polymer showed higher molecular recognition ability for BPA than the OP-imprinted polymer. The BPA- and BP-imprinted polymers were applied for the assay of a trace amount of BPA in river water using column-switching HPLC with fluorescence detection: A BPA-imprinted polymer was used for removal of BPA from the pretreatment eluent as the trap column, and a BP-imprinted polymer was used for selective pretreatment and enrichment of BPA in river water as the pretreatment column. The calibration graph, constructed from peak area data plotted versus BPA concentration, was linear with a correlation coefficient of >0.999 in the concentration ranges of 25-1000 ppt. The limit of quantitation was 25 ppt with a 5-ml injection. The column-switching HPLC system was successfully applied for the assay of BPA in river water.     

(S)-1,1-二苯基-2-吡咯啶甲醇催化蒽酮与马来酰亚胺的不对称Diels-Alder反应

研究了(S)-1,1-二苯基-2-吡咯啶甲醇催化蒽酮与马来酰亚胺的不对称D iels-A lder反应,考察了蒽酮与不同N-取代马来酰亚胺的反应。结果表明,在最佳反应条件下化学产率97%,对映选择性44%。     

Crystal Structure of 10-(2'''',5''''-Dimethoxybenzylidene) Anthrone

1 INTRODUCTION The 10-benzylidene anthrones which are important intermediate for organic syntheses[1～3] usually possess thermochromism[4] and photo- chromism[5], and have been found recently to have evident anti-cancer activity[6]. We found that the substituents in the phenyl ring will affect the bioactivity of those compounds. For more deeply investigating the structure-activity relationships (SAR) and understanding interactions between the three dimensional structure of the compound …     

A convenient semisynthetic route to hypericin

Summary A semisynthetic route to produce hypericin was established usingCortex frangulae as the starting point. The emodin isolated from it easily and in good yield was reduced to emodin anthrone by means of SnCl₂. The latter was reacted via a known oxidative dimerization and photocyclization reaction into hypericin.

---

Ein bequemer semisynthetischer Zugang zu Hypericin

Zusammenfassung Eine semisynthetische Route zur Darstellung von Hypericin unter Verwendung vonCortex frangulae als Ausgangsmaterial wurde erarbeitet. Das daraus einfach und in guten Ausbeuten isolierte Emodin wurde mit Hilfe von SnCl₂ zu Emodinanthron reduziert. Letzteres wurde dann über eine bekannte oxidative Dimerisierung und Photocyclisierung zu Hypericin umgesetzt.

     

Absorption spectra of carbohydrates and related compounds in H2SO4

The possibility of modifying the Dreywood anthrone method for spectrophotometric determination of carbohydrates in order to increase the accuracy and reproducibility of the results was examined. The classical method and a developed modification were compared. The relative uncertainty in a determination by the modified method was less than 4%. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 218–220, May–June, 2006.     

The absolute axial configurations of knipholone and knipholone anthrone by TDDFT and DFT/MRCI CD calculations: a revision

Triggered by a seemingly inconsistent twisting direction in the atroposelective ring cleavage reaction of biaryl lactones by using the ‘lactone concept’, the absolute axial configurations of the most important phenylanthraquinones, knipholone (1), and knipholone anthrone (2) were reassigned on the basis of renewed quantum chemical circular dichroism (CD) calculations using advanced, higher-level methods, viz. a time-dependent DFT (TDDFT) and a multireference configurational interaction approach (DFT/MRCI). Additional confirmation of the new configurational assignment of 1 and 2 was achieved by their stereochemically unambiguous interconversion, and further corroborated by the transformation of 1 into an ‘leuco’ phenylanthracene derivative 3, i.e., a compound with a substantially different chromophore, whose absolute configuration was independently assigned again by quantum chemical CD calculations. Accordingly, the dextrorotatory enantiomer of knipholone, (+)-1, and its anthrone, (+)-2, has the P-configuration, while the laevorotatory forms, (−)-1 and (−)-2 (which likewise exist in nature), are M-configured. From this new configurational assignment, the absolute axial stereostructures of a whole series of further naturally occurring phenylanthraquinones may now be deduced.     

A synthesis of emodin anthrone

Summary A novel high yield (74% overall) synthesis of five steps to prepare emodin anthrone, which serves as a valuable precursor of hypericin, was devised using the benzamideortho lithiation strategy for the key step.Dedicated to Prof. K. Schaffner on the occasion of his 60th birthday