Polarization control method for ultraviolet writing of advanced Bragg gratings

We present a flexible and simple method for UV writing of Bragg gratings with advanced apodization profiles including discrete phase shifts. The method is based on a p phase shift between the refractive-index modulation profiles induced by s and p polarization of UV light. By changing the ratio of UV intensity in the two polarizations we are able to control the modulation strength and to induce phase shifts while keeping a constant effective refractive index throughout the Bragg grating. We demonstrate strong UV-written Bragg gratings with Gaussian or sinc apodizations with spectral shapes, in good agreement with theoretical predictions.     

Fiber Bragg gratings for dispersion compensation in optical communication systems

This paper presents an overview of fiber Bragg gratings (FBGs) fabrication principles and applications with emphasis on the chirped FBG used for dispersion compensation in high-speed optical communication systems. We discuss the range of FBG parameters enabled by current fabrication methods, as well as the relation between the accuracy of FBG parameters and the performance of FBG-based dispersion compensators. We describe the theory of the group delay ripple (GDR) generated by apodized chirped fiber gratings using the analogy between noisy gratings and superstructure Bragg gratings. This analysis predicts the fundamental cutoff of the high frequency spatial noise of grating parameters in excellent agreement with the experimental data. We review the iterative GDR correction technique, which further improves the FBG quality and potentially enables consistent fabrication of FBG-based dispersion compensators and tunable dispersion compensators with unprecedented performance.     

73-nm tuning of a double-clad Yb<Superscript>3+</Superscript>-doped fiber laser based on a hybrid array

We report on a wide wavelength tuning in a double-clad ytterbium-doped fiber laser. The laser cavity consists of an array of broadband high-reflection fiber Bragg gratings and a bulk grating as the output coupler and wavelength selection element. The proposed fiber laser configuration combines a low intracavity loss of the fiber Bragg grating mirrors with a wide wavelength tuning of the bulk gratings. We demonstrate a >70-nm wavelength tuning range, limited only by the available fiber Bragg gratings.     

臂内含光纤光栅的方向耦合器的理论研究

提出了臂内含有光纤光栅的方向耦合器的一般原理，推导了任意端口输入任意一端口的输出表达式，作为特例，研究了两类法布里－珀罗干谐振腔，发现它们之间存在一种交换等价关系，第一次阐述光纤光栅法布里－珀罗腔中调幅和调频的概念。     

X-ray Bragg diffraction on periodic surface gratings

We report on the X-ray Bragg diffraction analysis of periodic surface gratings on (100) GaAs crystals. We show that the X-ray Bragg diffraction is a very powerful method to investigate ultrafine surface gratings and allow us to determine not only the grating period but, in particular, the width of the grooves and to characterize the quality of the sidewalls, which is not easily possible with optical methods. The X-ray diffraction on surface crystal gratings is analogue to the Fraunhofer diffraction of multiple slits or reflection gratings.     

切趾技术对光纤布拉格光栅法布里-珀罗滤波器反射特性优化的研究

利用矩阵分析法,针对两个相同光栅构成的光纤布拉格光栅法布里-珀罗(F-P)腔滤波器进行理论分析。数值模拟分析了光栅长度变化对光栅以及F-P腔滤波器反射特性的影响,指出光栅长度增加对反射特性影响的优缺点,分析利用常用切趾函数对光栅进行切趾,减小由于光栅长度增加导致反射谱的的旁瓣增大,对组成的F-P腔滤波器的反射特性的优化,得到了光栅切趾对F-P腔滤波器的反射特性的影响规律。对于在实际应用中制作出性能优良的光纤布拉格光栅F-P腔滤波器有一定的参考价值。     

Analysis and design of nonlinear fiber Bragg gratings and their application for optical compression of reflected pulses

We demonstrate a novel split-step solution for analyzing nonlinear fiber Bragg gratings. The solution is used for designing nonlinear fiber Bragg gratings with a low reflectivity. The structure of the grating is designed according to the profiles of the incident and reflected pulses. We demonstrate our method for nonlinear compression of a pulse reflected from a fiber Bragg grating. The method allows us to obtain compressed pulses with a very low wing intensity.     

Fiber laser with combined feedback of core and cladding modes assisted by an intracavity long-period grating

We present a fiber laser made in a single piece of conventional doped-core fiber that operates by combined feedback of the fundamental core mode LP((0,1)) and the high-order cladding mode LP((0,10)). The laser is an all-fiber structure that uses two fiber Bragg gratings and a long-period grating to select the modes circulating in the cavity; the laser emits at the coupling wavelength between the core mode LP((0,1)) and the counterpropagating cladding mode LP((0,10)) in the Bragg gratings. This work demonstrates the feasibility of high-order mode fiber lasers assisted by long-period gratings.     

Tunable all-optical negative multitap microwave filters based on uniform fiber Bragg gratings

We present a novel and simple technique for obtaining transversal filters with negative coefficients by using uniform fiber Bragg gratings. We demonstrate a wide tuning range, good performance, low cost, and easy implementation of multitap filters in an all-optical passive configuration in which negative taps are obtained by use of the transmission of a broadband source through uniform Bragg gratings.     

Observation of type I and type II gratings behavior in polymer optical fiber

We report the first observation of type I and type II fiber grating behaviors in making polymer optical fiber Bragg gratings. Our observation reveals that there are two distinctive stages in the fabrication of polymer optical fiber Bragg gratings. Notably the two stages of grating formation correspond to low and high-index modulation gratings, which match well with those in silica fiber grating fabrication. Thus we refer them as type I and type II polymer fiber gratings, following the same nomenclatures for different types of silica fiber gratings. In addition, the characteristics and formation mechanism for type I and type II polymer fiber gratings are also examined.     

三角形大带宽反射光谱光纤光栅的设计和制备

反射谱具有三角形形状的光纤光栅在光纤传感等领域中具有重要的应用前景。利用遗传算法设计出了产生三角形光谱分布的光纤光栅的耦合系数沿光纤的分布。计算表明,三角形光谱光纤光栅是可以实现的,其反射带宽可以通过光栅的啁啾量进行调节,常周期的三角光栅反射带宽小,变周期的三角光栅反射带宽大,其带宽同其啁啾量大致相等。实验中,采用光束扫描法制备了反射底宽为0．77nm三角形光谱的光纤光栅。     

Inscription of high contrast volume Bragg gratings in fused silica with femtosecond laser pulses

We present volume Bragg gratings (VBGs) with a period of 1.075 μm inscribed in fused silica using a femtosecond laser and a phase mask. The femtosecond-inscribed VBGs can be used as reflecting elements with reflectivities of about 80% for a 1-mm-long grating. Due to the non-sinusoidal refractive-index shape, higher order Bragg resonances up to the 7th reflection order could be measured. Therefore, the Bragg gratings also reflect light in the visible-wavelength range.     

All-Fiber Spectroscope with Second-Order Fiber Bragg Grating for Rotational Raman Lidar

Owing to the second-order fiber Bragg grating possessing narrower reflectivity bandwidth than first-order, an all-fiber spectroscopic filter with several second-order fiber Bragg gratings and optical fiber couplers in the visible region is designed to extract interest rotational Raman spectra. Considering the inference fringe visibility of inscribing fiber Bragg grating and the fiber core index dispersion effect, numerical simulations are made by the improved mathematical model based on an exponential photorefractive dynamic, and its simulative results show better agreement with the experimental data. We propose an all-fiber spectroscopic configuration, which could balance lidar sensitivity against signal-to-noise ratio for optimizing remote sensing performance by fiber Bragg gratings serially. Simulative results show that the thumb principle for fabricating second-order fiber Bragg grating is the increasing gratings length, and that this all-fiber spectroscope can achieve >70 dB suppression to elastic scattering and efficiently extract the rotational Raman signal for profiling atmospheric temperature.     

Multiwavelength Raman-fiber-laser-based long-distance remote sensor for simultaneous measurement of strain and temperature

We propose a simple and flexible multiwavelength Raman-fiber-laser-based long-distance remote-sensing scheme for simultaneous measurement of strain and temperature by use of fiber Bragg gratings. By combining two uniform fiber Bragg gratings with a tunable chirped fiber grating, we readily achieve simultaneous two-channel sensing probes with a high extinction ratio of more than approximately 50 dB over a 50-km distance. When strain and temperature are applied, lasing wavelength separation and shift occur, respectively, since the two uniform fiber Bragg gratings have identical material composition and different cladding diameters. This allows simultaneous measurement of strain and temperature for long-distance sensing applications of more than 50 km.     

多波长啁啾叠栅的矩阵分析

在分析多波长啁啾叠栅特征的基础上,提出了多波长啁啾叠栅的矩阵分析模型,采用矩阵分析模型对4波长和8波长啁啾叠栅的反射谱特性进行了理论分析,数值分析结果与实验结果非常一致.还首次数值模拟了波长间隔0.8 nm的16波长啁啾叠栅.此方法对多波长啁啾叠栅的设计和制作具有参考价值.     

Beam splitting, combining, and cross coupling through multiple superimposed volume-index gratings

We investigate the diffraction properties of multiple-superimposed index gratings from a vector synthetic viewpoint using coupled wave analysis with Bragg and non-Bragg readout. The vector synthetic gratings consist of two volume-index gratings with different grating wave vectors, which can be obtained in photorefractive materials, in optical fibers or in Bragg cells with two driving acoustic waves. This structure can realize beam splitting, beam combining, and beam cross coupling, etc. Analytic expressions for the diffraction efficiency as well as the amplitude of the waves involved are obtained. The results are presented and discussed.     

Visualization of type II fiber Bragg gratings induced in a birefringent fiber with an elliptical stress cladding

Experimental results on visualization of type II fiber Bragg gratings induced in a birefringent fiber with an elliptical stress cladding are presented. The gratings are recorded by a single pulse of an excimer KrF-laser by means of the phase-mask method. Images of the gratings are obtained in a bright field using contrasting techniques such as differential interference contrast and dark field. It is shown that single-pulse recording forms several type II Bragg gratings in the optical fiber. The spatial profile of these gratings corresponds to the phase mask period. Microcracks due to which type II gratings are induced are localized both on the boundaries between the fiber core and claddings surrounding it and at some distance from them.     

Two-axis bend measurement with Bragg gratings in multicore optical fiber

We describe what is to our knowledge the first use of fiber Bragg gratings written into three separate cores of a multicore fiber for two-axis curvature measurement. The gratings act as independent, but isothermal, fiber strain gauges for which local curvature determines the difference in strain between cores, permitting temperature-independent bend measurement.     

Spectral Talbot phenomena in sampled arbitrarily chirped Bragg gratings

We derive the general conditions for which spectral Talbot phenomena, both integer and fractional self-imaging, can be observed in sampled arbitrarily chirped fiber Bragg gratings. These results are a generalization of those previously reported in [C. Wang, J. Azaña, L.R. Chen, Opt. Lett. 29(14) (2004) 1590] in which spectral Talbot phenomena were observed in sampled linearly chirped fiber Bragg gratings. We confirm our theoretical derivations with numerical simulations.     

Strong Bragg gratings photoinduced by 633-nm illumination in evaporated As2Se3 thin films

Bragg gratings are used in several photonic devices to reflect, and thus to isolate, specific wavelengths of light. Gratings can be photoinduced in chalcogenide glasses by illumination of bandgap light in an interference pattern. We used holographic interferometry to create Bragg gratings in amorphous As2Se3 thin films with a period of 0.56 microm by illumination with 633-nm light. The quality of the gratings was tested in real time, and refractive-index modulations as high as 0.037 were measured. These gratings were found to be stable over a period of several months if they were kept in the dark.