A label-free electrochemical immunoassay for IgG detection based on the electron transfer

In this study, a highly selective, label-free electrochemical immunoassay strategy based on the charge transport through the multilayer films associated with the electrocatalytic reduction of [Fe(CN)₆]³⁻ is proposed using human immunoglobulin G (human IgG) as the model analyte. The antibody-antigen complex formed on the sensing interface can efficiently induce change of the surface charge characteristics, the conductivity of multilayer film and/or electron transfer distance, resulting in an immunoreaction signal. The current reduction is proportional to the amount of analyte. Under the optimized experimental conditions, the proposed sensing strategy provides a linear dynamic range from 10 to 10⁴ ng mL⁻¹ and a detection limit of 3 ng mL⁻¹, indicating an improved analytical performance. This possibly makes it a potential alternative in bioanalysis of proteins and other molecules.     

Low-cost polymer-film spiral inertial microfluidic device for label-free separation of malignant tumor cells

We developed a low-cost polymer-film spiral inertial microfluidic device for the effective size-dependent separation of malignant tumor cells. The device was fabricated in polymer films by rapid laser cutting and chemical bonding. After fabricating the prototype device, the separation performance of our device was evaluated using particles and cells. The effects of operational flow rate, cell diameter, and cell concentration on the separation performance were explored. Our device successfully separated tumor cells from polydisperse white blood cells according to their different migration modes and lateral positions. Then, the separation of rare cells was carried out using the high-concentration lysed blood spiked with 200 tumor cells. Experimental results showed that 83.90% of the tumor cells could be recovered, while 99.87% of white blood cells could be removed. We successfully employed our device for processing clinical pleural effusion samples from patients with advanced metastatic breast cancer. Malignant tumor cells with an average purity of 2.37% could be effectively enriched, improving downstream diagnostic accuracy. Our device offers the advantages of label-free operation, low cost, and fast fabrication, thus being a potential tool for effective cell separation.     

A label-free electrochemical biosensor for microRNA detection based on apoferritin-encapsulated Cu nanoparticles

MicroRNAs (miRNAs), a class of small endogenous nonprotein-coding RNAs, regulate a wide range of biological processes, and their abnormal expressions are related to the growth and development of plants. Thus, a simple, rapid, and highly sensitive assay for miRNA detection is of great significance. In this work, a label-free and ultrasensitive assay for miRNA detection using protein cage nanoparticles has been developed. Apoferritin-encapsulated Cu nanoparticles (Cu-apoferritin) could be immobilized on the electrode through special reaction between amino and carboxyl. Hybridization event between the probe DNA and the target miRNA-159a is confirmed by electrochemical oxidation signal after Cu released into the detection buffer by adjusting the pH. This assay is highly selective and sensitive with a low detection limit of 3.5 fM. Moreover, the developed method can even discriminate single-base mismatched strand between the complementary targets. The effect of abscisic acid on the expression level of miRNA-159a in Arabidopsis thaliana seeds was also investigated.     

A label-free electrochemical immunosensor based on gold nanoparticles for detection of paraoxon

An electrochemical immunosensor for the direct determination of paraoxon has been developed based on the biocomposites of gold nanoparticles loaded with paraoxon antibodies. The biocomposites are immobilized on the glassy carbon electrode (GCE) using Nafion membrane. On the immunosensor prepared paraoxon shows well-shaped CV with reduction and oxidation peaks located −0.08 and −0.03 mV versus SCE, respectively. The detection of paraoxon performed at −0.03 mV is beneficial for guaranteeing sufficient selectivity. The amount of the biocomposite consisting gold nanoparticles loaded with antibodies and the volume of Nafion solution used for fabricating the immunosensor have been studied to ensure sensitivity and conductivity of the immunosensor. The immunosensor has been employed for monitoring the concentrations of paraoxon in aqueous samples up to 1920 μg l⁻¹ with a detection limit of 12 μg l⁻¹.     

A semi-empirical calculation of the potential surface for the CH 3 . +CH2=CH2 reaction

A model for the reaction CH ₃ ^. +CH₂=CH₂ is studied including the hybridization change of the reaction center. The interaction energy is devided into two parts. The first is a stabilization energy — the contribution due to the -electron delocalization (including the hybridization effects). It is computed by the PPP method. The second part is an exchange repulsion due to all valence electrons of the three carbon atoms. Correlation corrections are considered. A potential energy surface is constructed, giving a saddle point value close to the experimental activation energy. A discussion is given of the approximations involved. The method suggested is a generalization of the reactivity indices method of the theory of chemical reactivity. It can be regarded as a justification of this more empirical approach.

---

Zusammenfassung Ein Modell für die Reaktion CH ₃ ^. +CH₂=CH₂ wird untersucht, einschließlich der Änderung der Hybridisation des Reaktionszentrums. Die Wechselwirkungsenergie wird in zwei Teile zerlegt. Der erste Teil ist eine Stabilisationsenergie — der Beitrag, der der Delokalisierung des -Elektrons (einschließlich Hybridisationseffekte) entspricht. Der zweite Teil ist eine Austauschabstoßung, die von allen Valenzelektronen der drei Kohlenstoffatome herrührt. Korrellationskorrekturen werden berücksichtigt. Eine Fläche der potentiellen Energie wird konstruiert mit einem Sattelpunktswert, der dicht an der experimentellen Aktivierungsenergie liegt. Die verwendeten Näherungsmethoden werden diskutiert. Die vorgeführte Methode ist eine Verallgemeinerung der Methode der Reaktivitätsindices aus der Theorie der chemischen Reaktivität. Sie kann als eine Rechtfertigung dieser mehr empirischen Näherung angesehen werden.

---

Résumé Etude d'un modèle pour la réaction CH ₃ ^. +CH₂=CH₂ où l'on tient compte du changement d'hybridation du centre réactif. L'énergie d'interaction est divisée en deux termes. Le premier est une énergie de stabilisation; c'est la contribution dela délocalisation des électrons (effets d'hybridation compris). Il est calculé par la méthode PPP. Le second terme est une répulsion d'échange dûe à tous les électrons de valence des trois atomes de carbone. Les corrections de corrélation sont introduites.Une surface d'énergie potentielle est construite; elle fournit une valeur de l'énergie d'activation proche de celle obtenue expérimentalement. Les approximations utilisées sont discutées. La méthode proposée est une généralisation de celles des indices de réactivité. On peut la considérer comme justifiant cette approche plus empirique.

     

A label-free electrochemical biosensor for trace uranium based on DNAzymes and gold nanoparticles

A novel and highly sensitive electrochemical DNAzymes biosensor was fabricated using Au nanoparticles (AuNPs) immobilized on the surface of Au electrode that had been previously modified with self-assembled monolayers of 1,6-hexanedithiol. Different modified electrodes were prepared and characterized by cyclic voltammetry and electrochemical impedance spectroscopy. The AuNPs were found to have a large surface area to anchor a large number of negatively charged phosphate backbones of DNAzymes, which further absorbed the electroactive indicator of hexaammineruthenium(III) ([Ru(NH₃)₆]³⁺) to amplify the electrochemical signal. In the presence of target molecules, a large amount of DNA partly associated with [Ru(NH₃)₆]³⁺ were removed from the electrode surface, leading to a significant decrease in peak current. Differential pulse voltammetry signals of [Ru(NH₃)₆]³⁺ provided quantitative measures of the concentrations of uranyl ion (UO₂ ²⁺), with linear calibration ranging from 13 pM to 0.15 nM and a detection limit of 5 pM. The presence of other metal ions did not affect the detection of UO₂ ²⁺, which indicated the high specificity of UO₂ ²⁺. Therefore, a new electrochemical DNAzymes sensor was designed with specific DNAzymes and AuNPs as immobilization platform and signal amplifier.     

A label-free electrochemical immunosensor based on multi-functionalized graphene oxide for ultrasensitive detection of microcystin-LR

In this paper, a label-free electrochemical immunosensor for ultrasensitive detection of microcystin-leucine-arginine (MC-LR) based on multi-functionalized graphene oxide was constructed. The graphene oxide has a large surface area for the immobilization of the antibody. Meanwhile, the introduction of the AuNPs and 1-butyl-3-methylimidazolium hexafluorophosphate could enhance the response of the current by improving the electrical conductivity. Thus the electrochemical immunosensor could be prepared through a one-step process and differential pulse voltammetry was employed to detect sensitively MC-LR. Under optimal conditions, the current response of the immunosensor decreased proportionally to the logarithmic concentrations of MC-LR in the range of 0.1–1000 ng/mL with a detection limit of 0.1 ng/mL (S/N = 3). This one-step label-free electrochemical immunosensor showed good performance in specificity, stability, reproducibility, and application.     

A microfluidic approach for anticancer drug analysis based on hydrogel encapsulated tumor cells

A novel method based on fluorescence detection of hydrogel encapsulated cells in microchannels was developed for anticancer drug analysis. In this work, human hepatoma HepG2 cells and human lung epithelial A549 cells were simultaneously immobilized inside two different shapes of three-dimensional hydrogel microstructures using photolithography approach on a same array. Microarrays of living cells offer the potential for parallel detection of many cells and thereby enable high-throughput assays. Using a photolithographic setup, we investigated the prepolymer composition and crosslinking parameters that influenced cell viability inside photocrosslinked hydrogels. The viability of cells encapsulated inside hydrogel microstructures was higher than 90% under optimized photocrosslinking conditions. The cells were further cultured under stable conditions and remained viable for at least three days that were able to carry out cell-based assays. Furthermore, we studied the variation of two intracellular redox parameters (glutathione and reactive oxygen species) in anticancer drug-induced apoptosis in HepG2 and A549 cells. Two anticancer drugs exhibited distinct effects on the levels of intracellular glutathione and reactive oxygen species, indicating the selectivity of these drugs on the disturbance of redox balance within cells. The established platform provides a convenient and fast method for monitoring the effect of anticancer drugs on tumor cells, which is very useful for fundamental biomedical research.     

A sensitive and label-free impedimetric biosensor based on an adjunct probe

A highly sensitive and label-free impedimetric biosensor is achieved based on an adjunct probe attached nearby the capture probe. In this work, the adjunct probe was co-assembled on the surface of gold electrode with the capture probe hybridized with the reporter probe, and then 6-mercapto-1-hexanol was employed to block the nonspecific binding sites. When target DNA was added, the adjunct probe functioned as a fixer to immobilize the element of reporter probe displaced by the target DNA sequences and made the reporter probe approach the electrode surface, leading to effective inhibition of charge transfer. The increase in charge transfer resistance is related to the quantity of the target DNA in a wide range. The linear range for target DNA with specific sequences was from 0.1 nM to 0.5 μM with a good linearity (R = 0.9988) and a low detection limit of 6.3 pM. This impedimetric biosensor has the advantages of simplicity, sensitivity, good selectivity, and large dynamic range.     

A label-free electrochemical biosensor based on a DNA aptamer against codeine

In order to develop a sensor for opium alkaloid codeine detection, DNA aptamers against codeine were generated by SELEX (systematic evolution of ligands by exponential enrichment) technique. An aptamer HL7-14, which is a 37-mer sequence with K_d values of 0.91 μM, was optimized by the truncation-mutation assay. The specificity investigation shows that HL7-14 exhibits high specificity to codeine over morphine, and almost cannot bind to other small molecule. With this new selected aptamer, a novel electrochemical label-free codeine aptamer biosensor based on Au-mesoporous silica nanoparticles (Au-MSN) as immobilized substrate has been proposed using [Fe(CN)₆]^3−/4− as electroactive redox probe. The linear range covered from 10 pM to 100 nM with correlation coefficient of 0.9979 and the detection limit was 3 pM. Our study demonstrates that the biosensor has good specificity, stability and well regeneration. It can be used to detect codeine.     

A single transition state serves two mechanisms. The branching ratio for CH2O*- + CH3Cl on improved potential energy surfaces

The reaction of formaldehyde radical anion with methyl chloride, CH2O*- + CH3Cl, is an example in which a single transition state leads to two products: substitution at carbon (Sub(C), CH3CH2O* + Cl-) and electron transfer (ET, CH2O + CH3* + Cl-). The branching ratio for this reaction has been studied by ab initio molecular dynamics (AIMD). The energies of transition states and intermediates were computed at a variety of levels of theory and compared to accurate energetics calculated by the G3 and CBS-QB3 methods. A bond additivity correction has been constructed to improve the Hartree-Fock potential energy surface (BAC-UHF). A satisfactory balance between good energetics and affordable AIMD calculations can be achieved with BH&HLYP/6-31G(d) and BAC-UHF/6-31G(d) calculations. Approximately 200 ab initio classical trajectories were calculated for each level of theory with initial conditions sampled from a thermal distribution at 298 K at the transition state. Three types of trajectories were distinguished: trajectories that go directly to ET product, trajectories that go to Sub(C) product, and trajectories that initially go into the Sub(C) valley and then dissociate to ET products. The BH&HLYP/6-31G(d) calculations overestimate the number of nonreactive and direct ET trajectories because the transition state is too early. For the BH&HLYP and BAC-UHF methods, about one-third of the trajectories that initially go into the Sub(C) valley dissociate to ET products, compared to just over half with UHF/6-31G(d) in the earlier study. This difference can be attributed to a better value for the calculated energy release from the initial transition state and to an improved Sub(C) --> ET barrier height with the BH&HLYP and BAC-UHF methods.     

Double spiral microchannel for label-free tumor cell separation and enrichment

This work reports on a passive double spiral microfluidic device allowing rapid and label-free tumor cell separation and enrichment from diluted peripheral whole blood, by exploiting the size-dependent hydrodynamic forces. A numerical model is developed to simulate the Dean flow inside the curved geometry and to track the particle/cell trajectories, which is validated against the experimental observations and serves as a theoretical foundation for optimizing the operating conditions. Results from separating tumor cells (MCF-7 and Hela) spiked into whole blood indicate that 92.28% of blood cells and 96.77% of tumor cells are collected at the inner and the middle outlet, respectively, with 88.5% tumor recovery rate at a throughput of 3.33 × 10(7) cells min(-1). We expect that this label-free microfluidic platform, driven by purely hydrodynamic forces, would have an impact on fundamental and clinical studies of circulating tumor cells.     

Cascaded strand displacement for non-enzymatic target recycling amplification and label-free electronic detection of microRNA from tumor cells

The monitoring of microRNA (miRNA) expression levels is of great importance in cancer diagnosis. In the present work, based on two cascaded toehold-mediated strand displacement reactions (TSDRs), we have developed a label- and enzyme-free target recycling signal amplification approach for sensitive electronic detection of miRNA-21 from human breast cancer cells. The junction probes containing the locked G-quadruplex forming sequences are self-assembled on the senor surface. The presence of the target miRNA-21 initiates the first TSDR and results in the disassembly of the junction probes and the release of the active G-quadruplex forming sequences. Subsequently, the DNA fuel strand triggers the second TSDR and leads to cyclic reuse of the target miRNA-21. The cascaded TSDRs thus generate many active G-quadruplex forming sequences on the sensor surface, which associate with hemin to produce significantly amplified current response for sensitive detection of miRNA-21 at 1.15 fM. The sensor is also selective and can be employed to monitor miRNA-21 from human breast cancer cells.     

A new antibody immobilization strategy based on electrodeposition of nanometer-sized hydroxyapatite for label-free capacitive immunosensor

A new antibody immobilization strategy was proposed for the fabrication of a label-free capacitive immunosensor based on electrodeposition of nanometer-sized bioactive hydroxyapatite (HAP). By a procedure of constant current cathodal electrodeposition, a nano-HAP film with bioactivity was formed on a self-assembled β-mercaptoethanol monolayer-modified gold electrode. A suitable amount of chitosan was added into the electrodeposition solution with the aim of obtaining a strong and homogeneous HAP-coating film. After blocking with long-chain alkylthiol and then embedding antibody by coupling with divinylsulphone, the electrode was possessed of a higher initial capacitance value, which was suitable for capacitive transduction. The sensitive layer was characterized by Fourier transform infrared spectrum, scanning electron microscopy and electrochemical method. Human transferrin immunoassay was selected as the testing system. The linear response range of the sensor for transferrin was between 1 and 100 ng/mL with a detection limit of 0.15 ng/mL. After simply rinsing with subacidity solution, the regenerated sensor achieved up to 10 assay cycles without significant loss of sensitivity.     

A label-free and high sensitive aptamer biosensor based on hyperbranched polyester microspheres for thrombin detection

In this paper, we have synthesized hyperbranched polyester microspheres with carboxylic acid functional groups (HBPE-CA) and developed a label-free electrochemical aptamer biosensor using thrombin-binding aptamer (TBA) as receptor for the measurement of thrombin in whole blood. The indium tin oxide (ITO) electrode surface modified with HBPE-CA microspheres was grafted with TBA, which has excellent binding affinity and selectivity for thrombin. Binding of the thrombin at the modified ITO electrode surface greatly restrained access of electrons for a redox probe of [Fe(CN)₆]^3−/4−. Moreover, the aptamer biosensor could be used for detection of thrombin in whole blood, a wide detection range (10 fM–100 nM) and a detection limit on the order of 0.90 fM were demonstrated. Control experiments were also carried out by using bull serum albumin (BSA) and lysozyme in the absence of thrombin. The good stability and repeatability of this aptamer biosensor were also proved. We expect that this demonstration will lead to the development of highly sensitive label-free sensors based on aptamer with lower cost than current technology. The integration of the technologies, which include anticoagulant, sensor and nanoscience, will bring significant input to high-performance biosensors relevant to diagnostics and therapy of interest for human health.     

A label-free cytosensor for the enhanced electrochemical detection of cancer cells using polydopamine-coated carbon nanotubes

An electrochemical, label-free method was developed to detect folate receptor positive tumor cells by specific recognition of a polydopamine-coated carbon nanotubes-folate nanoprobe to cell-surface folate receptors. This strategy offers great promise to extend its application in studying the interaction of ligand and cell-surface receptor.     

An efficient label-free immunosensor based on ce-MoS2/AgNR composites and screen-printed electrodes for PSA detection

Journal of Solid State Electrochemistry - Label-free electrochemical immunosensors (EIs) are simple and sensitive in cancer diagnosis. Electrode materials which can offer a large specific area and...     

NMR investigations on Stannabicycloundecanes of the type RSn(CH2CH2CH2)3N

The ¹H, ¹³C, and ¹¹⁹Sn NMR data of seven stannabicycloundecanes of the type RSn(CH₂CH₂CH₂)₃N (1, R = Cl; 2 , R = Br; 3 , R = I; 4 , R = OH; 5 , R = SPh; 6 , R = Me; 7 , R = Sn(CH₂CH₂CH₂)₃N) are reported. From ¹H NMR coalescence data at low temperature the free activation enthalpies for the racemisation of the bicyclo[3.3.3]skeleton were estimated to be 37 ± 1 kJ/mol. They are independent of the substituent R. However, it decreases when the tin atom is replaced by silicon for R = Me.