Novel highly stable semiconductors based on phenanthrene for organic field-effect transistors

Two novel phenanthrene-based conjugated oligomers were synthesized and used as p-channel semiconductors in field-effect transistors; they exhibit high mobility and excellent stability during long-time ambient storage and under UV irradiation.     

High-performance organic field-effect transistors based on pi-extended tetrathiafulvalene derivatives

Aromatic ring-condensed TTF derivatives exhibited excellent p-type FET performances in thin films. Introduction of fused benzene and pyrazine rings to the TTF skeleton was effective to enhance the intermolecular interactions and stability to oxygen. Ordered molecular alignment was confirmed by XRD studies. A pi-stacking structure was observed in the single crystal of diquinoxalinoTTF.     

High-performance and multifunctional organic field-effect transistors

Organic field-effect transistors(OFETs) refer to field-effect transistors that use organic semiconductors as channel materials. Owing to the advantages of organic materials such as solution processability and intrinsic flexibility, OFETs are expected to be applicable in emergent technologies including wearable electronics and sensors, flexible displays, internet-of-things, neuromorphic computing, etc. Improving the electrical performance and developing multifunctionalities of OFETs are two major...     

Thiophene polymer semiconductors for organic thin-film transistors

Printed organic thin-film transistors (OTFTs) have received great interests as potentially low-cost alternative to silicon technology for application in large-area, flexible, and ultra-low-cost electronics. One of the critical materials for TFTs is semiconductor, which has a dominant impact on the transistor properties. We review here the structural studies and design of thiophene-based polymer semiconductors with respect to solution processability, ambient stability, molecular self-organization, and field-effect transistor properties for OTFT applications. We show that through judicial monomer design, delicately controlled pi-conjugation, and strategically positioned pendant side-chain distribution, novel solution-processable thiophene polymer semiconductors with excellent self-organization ability to form extended lamellar pi-stacking orders can be developed. OTFTs using semiconductors of this nature processed in ambient conditions have provided excellent field-effect transistor properties.     

High-performance air-stable organic field-effect transistors: isoindigo-based conjugated polymers

Two conjugated polymers, IIDDT and IIDT, based on an isoindigo core were developed for organic field-effect transisitors. Investigation of their field-effect performance indicated that IIDDT exhibited air-stable mobility up to 0.79 cm(2) V(-1) s(-1), which is quite high among polymer FET materials. The facile preparation and high mobility of such polymers make isoindigo-based polymers very promising for application as solution-processable organic semiconductors for optoelectronic devices.     

高迁移率有机薄膜晶体管材料进展

对近几年来高迁移率有机薄膜晶体管材料研究的主要发展作了简要介绍和评述,讨论了高迁移率有机半导体材料存在的问题和发展方向．     

Tailoring crystal polymorphs of organic semiconductors towards high-performance field-effect transistors

As a quite ubiquitous phenomenon, crystal polymorph is one of the key issues in the field of organic semiconductors. This review gives a brief summary to the advances on polymorph control of thin film and single crystal of representative organic semiconductors towards high-performance field-effect transistors. Particularly, the relationship between crystal polymporh and charge transport behaviour has been discussed to shed light on the rational preparation of outstanding organic semiconducting materials with desired crystal polymorph.     

High-performance low-cost organic field-effect transistors with chemically modified bottom electrodes

The characteristics of organic field-effect transistors (OFETs) were dramatically improved by chemically modifying the surface of the bottom-contact Ag or Cu source-drain (D-S) electrodes with a simple solution method. The contact resistance and energetic mismatch typically observed with Ag D-S electrodes in pentacene bottom-contact OFETs can be properly eliminated when modified by the Ag-TCNQ (TCNQ = 7,7,8,8-tetracyanoquinodimethane). The pentacene transistors with low-cost Ag-TCNQ-modified Ag bottom-contact electrodes exhibit outstanding electrical properties, which are comparable with that of the Au top-contact devices. It thus provides a novel way toward high-performance low-cost bottom-contact OFETs.     

2,6-Diarylnaphtho[1,8-bc:5,4-b'c']dithiophenes as new high-performance semiconductors for organic field-effect transistors

A series of 2,6-diaryl-substituted naphtho[1,8-bc:5,4-b'c']dithiophene derivatives 2-6, whose aryl groups include 5-hexyl-2-thienyl, 2,2'-bithiophen-5-yl, phenyl, 2-naphthyl, and 4-biphenylyl, was synthesized by the palladium-catalyzed Suzuki-Miyaura coupling and utilized as active layers of organic field-effect transistors (OFETs). All devices fabricated using vapor-deposited thin films of these compounds showed typical p-type FET characteristics. The mobilities are relatively good and widely range from 10(-4) to 10(-1) cm2 V(-1) s(-1), depending on the substituent groups. Among them, the mobilities of the devices using films of 3-5 tend to increase with the increasing temperature of the Si/SiO2 substrate during film deposition. In particular, the device based on the naphthyl derivative 5, when fabricated at 140 degrees C, marked a high mobility of 0.11 cm2 V(-1) s(-1) with an on/off ratio of 10(5), which is a top class of performance among organic thin-film transistors. Studies of X-ray diffractograms (XRDs) have revealed that the film of 4 and 5 is composed of two kinds of crystal grains with different phases, so-called "single-crystal phase" and "thin film phase", and that the proportion of the thin film phase increases with an increase of the substrate temperature. In the thin film phase the assembled molecules stand nearly upright on the substrate in such a way as to be favorable to carrier migration.     

High-performance organic field-effect transistors: molecular design, device fabrication, and physical properties

In the past decade, tremendous progress has been made in organic field-effect transistors (OFETs). Their real applications require further development of device performance. OFETs consist of organic semiconductors, dielectric layers, and electrodes. Organic semiconductors play a key role in determining the device characteristics. The properties of the organic semiconductors, such as molecular structure and packing, as well as molecular energy levels, can be properly controlled by molecular design. Therefore, we designed and synthesized a series of organic molecules. The synthesized organic semiconductors exhibit excellent field-effect properties due to strong intermolecular interactions and proper molecular energy levels. Meanwhile, the influence of the device fabrication process, organic semiconductor/dielectric layer interface, and organic layer/electrode contact on the device performance was investigated. A deep understanding of these factors is helpful to improve field-effect properties. Furthermore, single-crystal field-effect transistors are highlighted because the single-crystal-based FETs can provide an accurate conducting mechanism of organic semiconductors and higher device performance as compared with thin film FETs.     

Rational design of diarylethylene-based polymeric semiconductors for high-performance organic field-effect transistors

Constructing planar, rigid, and high electronically delocalized π-conjugated molecular system is the most basic requirements of obtaining high-performance polymeric semiconductors for organic field-effect transistors (OFETs). In this regard, diarylethylene (DAE)-based polymers show great potential because many substantive progresses related to polymer field-effect transistors had been achieved from the kind of polymer materials in recent years. In the brief review, series of DAE-based polymer are highlighted, based on which several design strategies have been summarized by the way of comparative research method. These strategies have important guiding significance not only for further developing new DAE-based and other polymeric semiconductors for OFETs but also for developing specific polymeric semiconductors for other organic electronics, such as organic photovoltaics and organic light-emitting diodes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 585–603     

Zone-refinement effect in small molecule-polymer blend semiconductors for organic thin-film transistors

The blend films of small-molecule semiconductors with insulating polymers exhibit not only excellent solution processability but also superior performance characteristics in organic thin-film transistors (OTFTs) over those of neat small-molecule semiconductors. To understand the underlying mechanism, we studied triethylsilylethynyl anthradithiophene (TESADT) with small amounts of impurity formed by weak UV exposure. OTFTs with neat impure TESADT had drastically reduced field-effect mobility (<10(-5) cm(2)/(V s)), and a disappearance of the high-temperature crystal phase was observed for neat impure TESADT. However, the mobility of the blend films of the UV-exposed TESADT with poly(α-methylstyrene) (PαMS) is recovered to that of a fresh TESADT-PαMS blend (0.040 cm(2)/(V s)), and the phase transition characteristics partly return to those of fresh TESADT films. These results are corroborated by OTFT results on "aged" TIPS-pentacene. These observations, coupled with the results of neutron reflectivity study, indicate that the formation of a vertically phase-separated layer of crystalline small-molecule semiconductors allows the impurity species to remain preferentially in the adjacent polymer-rich layer. Such a "zone-refinement effect" in blend semiconductors effectively removes the impurity species that are detrimental to organic electronic devices from the critical charge-transporting interface region.     

Chemical and biological sensors based on organic thin-film transistors

The application of organic thin-film transistors (OTFTs) to chemical and biological sensing is reviewed. This review covers transistors that are based on the modulation of current through thin organic semiconducting films, and includes both field-effect and electrochemical transistors. The advantages of using OTFTs as sensors (including high sensitivity and selectivity) are described, and results are presented for sensing analytes in both gaseous and aqueous environments. The primary emphasis is on the major developments in the field of OTFT sensing over the last 5–10 years, but some earlier work is discussed briefly to provide a foundation.     

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes: a new class of high-performance semiconductors for organic field-effect transistors

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes including thiophene, selenophene, and tellurophene analogues as organic semiconductors for field-effect transistors were effectively synthesized in three steps from commercially available 1,4-dibromobenzene. All three benzodichalcogenophenes acted as good p-type semiconductors, and particularly the selenophene analogue, 2,6-diphenylbenzo[1,2-b:4,5-b']diselenophene, showed high FET mobility of 0.17 cm2 V-1 s-1.     

High-performance field-effect transistors based on Langmuir-Blodgett films of cyclo[8]pyrrole

We demonstrate the field-effect transistors (FETs) made of cyclo[8]pyrrole thin films prepared by the Langmuir-Blodgett (LB) method. The cyclo[8]pyrrole molecule possesses a 30-pi-electron system and narrower highest-occupied molecular orbital-lowest-unoccupied molecular orbital energy gap (0.63 eV), forms a stable, reproducible monolayer at the air-water interface, and transfers onto a substrate with a nearly unity transfer ratio and face-to-face configuration due to its strong pi-pi interaction. The LB films are uniform characterized by atomic force microscopy and in ordered form confirmed by X-ray diffraction. The FET exhibited high performances with one of the highest hole mobilities (0.68 cm2 V(-1) s(-1)) for thin-film transistors and a high on/off ratio, implying a promising material in the FET family.     

Highly responsive biosensors based on organic field-effect transistors under light irradiation

High responsivity and sensitivity play essential roles in the development of organic field-effect transistors (OFETs)-based biosensors with regard to biological detections, particularly for disease diagnosis. Nonetheless, how to design a biosensor which improves these two outstanding properties while achieving low cost, easy processing, and time saving is a daunting challenge. Herein, a novel biosensor based on OFET with copolymer thin film, whose surface is illuminated with a suitable light beam is reported. This film can be used as both an organic semiconductor material and as a photoelectric active material. Due to amplification of signals as a result of the film’s strong response to light, the biosensor possesses higher responsivity and sensitivity compared to dark condition and even realizes a maximum responsivity of up to 10³ for alpha-fetoprotein (AFP) detection. The simple combination of light and transistor builds a bridge between photoelectric effect and biological system. In addition, the emergence of more excellent photoelectric active materials is expected to pave a way for ultrasensitive bio-chemical diagnostic tools.     

Bias-stress effects in organic field-effect transistors based on self-assembled monolayer nanodielectrics

The electrical stability of low-voltage organic transistors based on phosphonic acid self-assembled monolayer (SAM) dielectrics is investigated using four different semiconductors. The threshold voltage shift in these devices shows a stretched-exponential time dependence under continuous gate bias with a relaxation time in the range of 10(3)-10(5) s, at room temperature. Differences in the bias instability of transistors based on different self-assembled monolayers and organic semiconductors suggest that charge trapping into localized states in the semiconductor is not the only mechanism responsible for the observed instability. By applying 1-5 s long programming voltage pulses of 2-3 V in amplitude, a large reversible threshold voltage shift can be produced. The retention time of the programmed state was measured to be on the order of 30 h. The combination of low voltage operation and relatively long retention times makes these devices interesting for ultra-low power memory applications.