Simultaneous determination of Zr(IV) and Hf(IV) by CE using precolumn complexation with a [PW(11)O(39)](7-) ligand

A CE method was developed for the simultaneous determination of Zr(IV) and Hf(IV) at trace levels. A lacunary Keggin-type [PW(11)O(39)](7-) ligand reacted quantitatively with a mixture of trace amounts of Zr(IV) and Hf(IV) to form the so-called ternary Keggin-type anions [P(Zr(IV)W(11))O(40)](5-) and [P(Hf(IV)W(11))O(40)](5-) in 0.010 M monochloroacetate buffer (pH 2.2). Since both ternary anions possessed different electrophoretic mobilities and high molar absorptivities in the UV region, Zr(IV) and Hf(IV) were determined simultaneously with direct UV detection at 258 nm. Each peak height was linearly dependent on the concentration of Zr(IV) or Hf(IV) in the range of 5.0x10(-7)-1.0x10(-5) M; a detection limit of 2x10(-7) M was achieved. The utility of the proposed CE method was demonstrated for the simultaneous determination of Zr(IV) and Hf(IV) in natural water samples with satisfactory results.     

Adsorptive stripping voltammetry determination of molybdenum(VI) in water and soil

A differential pulse stripping voltammetry method for the trace determination of molybdenum(VI) in water and soil has been developed. In 0.048M oxalic acid and 6 x 10(-5)M Toluidine Blue (pH 1.8) solution, Mo(V), the reduction product of Mo(VI) in the sample solution, can form a ternary complex, which can be concentrated by adsorption on a static mercury drop electrode at -0.1 V (vs. Ag/AgCl). The adsorbed complex gives a well-defined cathodic stripping current peak at -0.30 V, which can be used for determining Mo(VI) in the range 5 x 10(-10)-7 x 10(-9)M, with a detection limit of 1 x 10(-10)M (4 min accumulation). The method is also selective. Most of the common ions do not interfere but Sn(IV) and large amounts of Cu(2+), Ag(+) and Au(3+) affect the determination.     

Determination of selenium(IV) and tellurium(IV) by differential pulse polarography

Differential pulse polarographic methods for the determination of selenium(IV) and tellurium(IV) in nitric acid medium are described. The peak current is maximal when 0.25M nitric acid medium is used, the DPP peaks for Se(IV) and Te(IV) being at -0.54 and -0.8 V vs. Ag/AgCl respectively. The peak current is a linear function of selenium concentration over three ranges, 5.1 x 10(-6)-1.3 x 10(-5), 1.27 x 10(-5)-1.27 x 10(-4) and 1.27 x 10(-4)-7.60 x 10(-4)M Se(IV), with different slopes. The plot for Te(IV) is linear over the range 0.78 x 10(-6)-9.40 x 10(-5)M.     

Polarographic determination of traces of zirconium in ores by use of complex-forming compounds adsorbable at the dropping mercury electrode

A polarographic method is proposed for the determination of trace zirconium down to the 5 x 10(-9)M level, based on the adsorption of the complex of zirconium with oxalic acid + cupferron + diphenylguanidine at the dropping mercury electrode in sodium acetate-acetic acid solution (pH 5.7). Under optimum conditions the wave-height is proportional to the concentration of zirconium in the range from 0 to 0.4 mug ml . The serious interference from titanium(IV) can be effectively eliminated by solvent extraction with 3% tri-n-octylamine from lN sulphuric acid and stripping with 0.1 M perchloric acid-lM hydrochloric acid-2M nitric acid mixture. The mechanism giving rise to the wave for the zirconium complex has been investigated. The method has been applied to the determination of trace zirconium in ores and ceramics.     

Determination of trace titanium with titanium(IV)-(DBC-arsenazo)-potassium bromate system by catalytic-kinetic spectrophotometry

In a 0.080 M sulphuric acid medium, trace titanium(IV) catalyzes the discoloring reaction of DBC-arsenazo oxidized by potassium bromate and the discoloring degree is proportional to the concentration of titanium(IV) in the solution. A new catalytic-kinetic spectrophotometric method for the determination of trace titanium(IV) was developed based on this principle. At a wavelength of 516 nm, the linear range of determination of titanium(IV) is 0–2.2 μg/25 mL. The detection limit for the determination of titanium is 2.04 ng/mL. The present method has been satisfactorily applied to the determination of titanium in fish samples. The text was submitted by the authors in English.     

Resonance scattering spectral analysis of chlorides based on the formation of (AgCl)n(Ag)s nanoparticle

A novel resonance scattering spectral method has been proposed for the determination of trace amounts of chlorides in the range of 2 x 10(-7)-8 x 10(-6) mol/l. It was based on the photochemical reaction system of AgNO3-NaCl-sodium oxalic to form the (AgCl)nucleus (n)(Ag)shell (s) nanoparticle. There is a strongest resonance scattering peak at 470 nm and a maximum absorption peak at 425 nm. The concentration of chlorides is proportional to the intensity of resonance scattering at 470 nm. The nonlinear resonance scattering peaks of the nanoparticle system have been also considered, according to the theory of the interaction between the surface electron of nanoparticle and the incidence photon.     

Simultaneous capillary electrophoretic separation and detection of P(V) and As(V) As heteropoly-blue complexes

A capillary electrophoretic (CE) method was developed for the simultaneous determination of P(V) and As(V). A Mo(VI)-ascorbic acid reagent reacted with a mixture of trace amounts of P(V) and As(V) to form the corresponding heteropoly-blue complexes in 0.05 M acetate buffer (pH 3.5). When 0.05 M malonate buffer was used as a migration buffer, the peaks due to their migrations were well separated in the electropherogram, and the pre-column complex-formation reaction was applied to the simultaneous CE determination of P(V) and As(V) with direct UV detection at 220 nm. With the proposed method, the calibration curves were linear in the concentration range of 5 x 10(-7) - 1 x 10(-4) M, with a detection limit of 1 x 10(-7) M (a signal-to-noise ratio of 3). Interference from foreign ions was also discussed.     

Polarographic determination of trace amounts of thorium

A sensitive linear-sweep polarographic method for the determination of thorium is described. It is based on the thorium complex with Xylidyl Blue I (XBI) in a medium containing ethylenediamine, 1,10-phenanthroline, oxalic acid and ninhydrin, at pH 10.5-11.5. The complex has been proved to be Th(XBI)(2), with log beta' = 9.6. The method can be used to determine trace amounts of thorium over the range 3.5 x 10(-8)-3 x 10(-6)M. The detection limit is 1 x 10(-8)M. A solvent extraction procedure is necessary to eliminate interference from several cations. The method has been applied to determination of traces of thorium in minerals, with good results.     

Catalytic kinetic spectrophotometric determination of iron with (dibromo-<Emphasis Type="Italic">p</Emphasis>-sulfonic acid arsenazo)-potassium bromate-ascorbic acid system

A new method for the determination of traces of iron was developed based on its catalytic effect on the oxidation reaction of dibromo-p-sulfonic acid-arsenazo (DBS-arsenazo, DBS-ASA) by potassium bromate in a 5.0 × 10⁻³ M sulfuric acid medium. The optimum experimental conditions for the determination of iron using iron(III)-dibromo-p-sulfonic acid-arsenazo, (DBS-ASA)-potassium bromate-ascorbic acid system and its kinetic spectrophotometric properties were studied. The absorbance difference (ΔA) is linearly related with the concentration of iron(III) over the range of 0.20–6.0 ng/mL at the maximum absorption wavelength of 520 nm and described by the equation: ΔA = 0.133c (ng/mL) — 0.0133 with a regression coefficient of 0.9966. The detection limit of the method is 0.17 ng/mL. The method has been successfully used in the determination of traces of iron in potato samples. The obtained results agree with those of atomic absorption spectrometry.     

Trace analysis of aluminum in natural waters with rubeanic acid by adsorption chronopotentiometry

The determination of trace levels of aluminum in natural waters with rubeanic acid (RA) by adsorption chronopotentiometry is developed in this paper. Optimum experimental conditions include an accumulation potential of -0.40 V, accumulation time of 60 s, and a RA concentration of 6x10(-6) M in 0.2 M NaAc-HAc buffer solution (pH 4.6). The response is linear over the 1x10(-8) approximately 4x10(-7) M concentration range. The detection limit is 5.6x10(-9) M and the relative S.D. (at the 3x10(-7) M level) is 2.6%. Possible interferences are evaluated. The method has been applied to the determination of trace levels of Al in various real samples. Direct determination of toxic forms of Al in surface waters by this technique is also explored.     

Sequential liquid-liquid extraction graphite furnace atomic absorption spectrometric (GFAAS) and spectrophotometric determination of zirconium(IV) with calixarene hydroxamic acid

A new calixarene hydroxamic acid, 25,26,27,28-tetrahydroxy-5,11,17,23-tetrakis (N-p-chlorophenyl) calix[4]arene hydroxamic acid (CPCHA) is synthesized and used for the extraction and graphite furnace atomic absorption determination of zirconium(IV). The extract is also determined spectrophotometrically as CPCHA-SCN complex having maximum absorbance at 447 nm with molar absorptivity 9.4x10(3) l mol(-1) cm(-1). The Beer's law obeys in the range of 1.0-9.5 ppm of zirconium. The graphite atomic absorption (GFAAS) increases the sensitivity by about 50 folds. The method is applied to the trace determination of zirconium(IV) in standard samples.     

A simple and rapid flow injection chemiluminescence determination of cysteine with Ru(phen)3(2+)-Ce(IV) system

A new chemiluminescence system was developed for the determination of cysteine by flow injection system. This method is based on the reaction of L-cysteine with Ru(phen)3(2+) and Ce(IV) to produce chemiluminescence. The calibration curve was linear over the range 8.0x10(-7) to 4.0x10(-5) and 4.0x10(-5) to 1.0x10(-3) M with a detection limit of 7.0x10(-7) M (S/N=3). The relative standard deviation of 4.0x10(-6) M cysteine was found 3.5% (n=10). The influence of potential interfering substances was studied. The proposed method was successfully applied for the flow injection determination of cysteine in the real samples with minimum sampling rate of 90 sample/h.     

Fluorimetric determination of cerium with paracetamol

A simple, sensitive and selective method for determination of cerium(IV), based on the oxidative reaction between cerium(IV) and paracetamol, has been developed. The fluorescent species is an oxidation product of paracetamol and has excitation and emission maxima at 265 and 360 nm, respectively. The fluorescent intensity of the system is linear over the range 2.0 x 10(-7)-8.0 x 10(-6)M Ce(IV). The method has been applied in the determination of Ce(IV) in synthetic mixtures and ores with good accuracy being achieved.     

The new fluorescence enhancement system Tb-N-(2-pyridinyl) ketoacetamide-Et(3)N-Zn and its application

A sensitive fluorescence enhancement system was developed for the determination of terbium. The fluorescence intensity of the Tb-N-(2-pyridinyl) ketoacetamide (PKAA) system was greatly enhanced by the addition of triethylamine (Et(3)N) and zinc nitrate in the methanol solution. The excitation and emission wavelengths were 329 and 546 nm, respectively. Under optimal conditions, the fluorescence intensities varied linearly with the concentration of Tb(3+) in the range of 7.5 x 10(-8)-8.2 x 10(-6)M with a detection limit of 6.4 x 10(-8)M. The interferences of some rare earth ions were described. This method was applied to the determination of trace amounts of terbium (III) in a synthetic rare earth oxide and a high purity Y(2)O(3) matrix. The mechanism of fluorescence enhancement was also studied.     

Extraction spectrophotometric determination of selenium(IV) with J acid in environmental samples

A new simple and sensitive method for the extraction and spectrophotometric determination of selenium(IV) is described. Selenium(IV) is reacted with J acid (6-ANSA) to form a butanol extractable complex with maximum absorbance of 520 nm. Beer's law is obeyed in the range of 0.03-0.3 mg/l. of selenium. Molar absorptivity and Sandell's sensitivity are found to be 18.5 +/- (0.1) x 10(3) l. mol(-1). cm(-1) and 0.004 microg/cm(2), respectively. The analytical parameters were optimized and the method applied for the determination of selenium in polluted water, soil, dust, hair and plant materials. The method is compared with other reported methods and found to be superior to many of the reported methods.     

A highly sensitive spectrophotometric determination of platinum(IV) using leuco xylene cyanol FF

A new, simple, highly sensitive and rapid spectrophotometric method has been described for the determination of platinum(IV). The method is based on the oxidation of leuco xylene cyanol FF (LXCFF) to its blue form of xylene cyanol FF by platinum(IV) in sulfuric acid medium (pH 1.0-2.5), the formed dye shows an absorption maximum at 620 nm in acetate buffer medium (pH 3.0-4.5). The method obeys Beer's law over a concentration range of 0.3 to 2.6 micro g mL(-1) platinum, having molar absorptivity and Sandell's sensitivity of 5.1x10(4) L mol(-)(1) cm(-1) and 0.0038 micro g cm(-2), respectively. The optimum reaction conditions and other analytical parameters have been evaluated. The developed method has been successfully applied to the determination of platinum in pharmaceutical preparations, soil, natural water, plant material, platinum-containing catalyst, and synthetic alloy samples.     

Extraction and spectrophotometric determination of titanium(IV) with malachite green and p-chloromandelic acid, with application to mild steels

A very sensitive, selective and simple method for extraction and spectrophotometric determination of titanium(IV) with an alpha-hydroxy acid has been developed. p-Chloromandelic acid reacts with titanium in weakly acidic aqueous solution at room temperature to form a complex anion extractable into chlorobenzene with Malachite Green as counter-ion. Titanium is determined indirectly by measuring the absorbance of Malachite Green in the extract at 630 nm. The calibration graph is linear for titanium(IV) over the range 0.25-7.5muM (0.05-1.44 mug); the apparent molar absorptivity is 1.31 x 10(5) l.mole(-1).cm(-1). The method has been successfully applied to the determination of titanium in mild steels.     

Spectrofluorimetric determination of copper(II) by its static quenching effect on the fluorescence of 4,5-dihydroxy-1,3-benzenedisulfonic acid

A spectrofluorimetric method has been developed for the determination of trace Cu(II) in real samples with 4,5-dihydroxy-l,3-benzenedisulfonic acid (Tiron) as a fluorimetric reporter. Tiron is very soluble in water and is a good fluorimetric reagent. However, as Tiron was complexed with Cu(II), the fluorescence intensity decreased proportionally to the concentration of Cu(II) by a static quenching effect. The excitation wavelength and the fluorescence wavelength of Tiron were 294 and 350 nm, respectively, as it was caused by a quenching effect from Cu(II) at pH 8.0. The highest sensitivity was shown at Tiron concentration of 5.0x10(-5) M. To enhance the quenching effect, the Cu(II)-Tiron complex solution was heated up to 80 degrees C for 90 min. As for Cu(II), the interference by Co(II) was very serious, which was eliminated by oxalate ion. The linear response to Cu(II) was shown at the concentration range between 5.0x10(-7) and 1.0x10(-5) M. With this proposed method, the detection limit of Cu(II) was 3.83(+/-0.09)x10(-7) M. Recoveries of Cu(II) in the diluted brass samples and the stream water samples were almost 100%. Based on results from the experiment, this proposed technique could be applied to the practical determination of Cu(II) in real samples.     

Chemiluminescence determination of some fluoroquinolone derivatives in pharmaceutical formulations and biological fluids using [Ru(bipy)(3)(2+)]-Ce(IV) system

A new chemiluminescence (CL) method using flow injection has been described for the rapid and sensitive determination of three fluoroquinolone derivatives, namely ofloxacin, norfloxacin and ciprofloxacin hydrochloride. The method is based on the CL reaction of the studied fluoroquinolones with tris(2,2'-bipyridyl)ruthenium(II) [Ru(bipy)(3)(2+)] and Ce(IV) in sulfuric acid medium. Under the optimum conditions, the CL intensity is proportional to the concentration of the drugs in solution over the range 0.05-7.0 mug ml(-1) for norfloxacin, 0.05-6.0 mug ml(-1) for ciprofloxacin hydrochloride and 0.003-0.7 mug ml(-1) for ofloxacin. The limits of detection (s/n=3) were 3.1x10(-8) M norfloxacin, 2.6x10(-8) M ciprofloxacin hydrochloride and 5.5x10(-9) M ofloxacin. The method was applied successfully to the determination of these compounds in dosage forms and biological fluids.     

Polarographic determination of fluoride using the adsorption wave of the Ce(III)-alizarin complexone-fluoride complex

A very sensitive electrochemical method for trace measurement of fluoride in water is discussed. The complex of cerium(III) with alizarin complexone (ALC) and fluoride ion is adsorbed at the dropping mercury electrode. In cathodic sweeps, the peak height is directly proportional to the concentration of fluoride over the range 8 x 10(-8)-5 x 10(-6)M (1.5 x 10(-9)-9.5 x 10(-8) g/ml), and the detection limit is 5 x 10(-8)M (9.5 x 10(-10) g/ml). The proposed method was applied to the determination of fluoride in water.