Association behavior of fluorine-containing and non-fluorine-containing methacrylate-based amphiphilic diblock copolymer in aqueous media

Fluorine-containing amphiphilic block copolymers, poly(sodium methacrylate)-block-poly(nonafluorohexyl methacrylate) (NaMAm-b-NFHMAn) (m:n = 61:12, 72:33, 64:57), and the corresponding non-fluorine-containing amphiphilic block copolymer, poly(sodium methacrylate)-block-poly(hexyl methacrylate) (NaMAm-b-HMAn) (m:n = 64:10, 69:37, 67:50), were synthesized. Both polyNaMA-b-polyNFHMA and polyNaMA-b-polyHMA formed micelles above critical micelle concentrations, (cmc's), around 3 x 10(-5) to 1 x 10(-4) mol/L, while neither polymer decreased surface tension of aqueous solutions. The size and shape of the micelles were examined by dynamic light scattering, small-angle neutron scattering, and small-angle X-ray scattering. PolyNaMA-b-polyHMA appeared to form only spherical micelles, while polyNaMA-b-polyNFHMA with a long NFHMA segment formed both spherical and rodlike micelles. The micelles of fluorine-containing block copolymers were obviously larger than those of non-fluorine-containing block copolymers with the same chain length and the same hydrophilic/hydrophobic chain ratio. The fluorine-containing block copolymer selectively solubilized fluorinated dye into the water phase when a mixture of decafluorobiphenyl and 2,6-dimethylnaphthalene was added to the micelle solution.     

Chemically tuned amphiphilic diblock copolymers dispersed in water: from colloids to soluble macromolecules

We investigate by small-angle scattering the structural behavior in water of a family of asymmetric poly(styrene-stat-(acrylic acid))-block-poly(acrylic acid), i.e., P(S-stat-AA)-b-PAA, diblock copolymers. These diblocks are of constant block ratio and increasing molar fraction, phi(AA), ranging from 0 to 1, of acrylic acid in the first P(S-stat-AA) statistical block. We identify three types of structural behavior in water: (i) for phi(AA) /= 0.50, the diblocks dispersions in water are at equilibrium. For high phi(AA), the diblocks are soluble in water, demonstrating that a transition from colloid-like objects to soluble macromolecules is achieved. Close to the transition, (phi(AA) approximately 0.50), the diblocks form objects interpreted as comprising a water-swollen core formed by the P(S-stat-AA) block, surrounded by a swollen brush composed of the majority PAA block, above a apparent critical micelle concentration. However, these diblocks do not behave as macrosurfactants, and their self-association behavior is rather interpreted as a microphase separation which can arise from the incompatibility between two polymer blocks P(S-stat-AA) and PAA placed in a common solvent water.     

Self-assembly of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers in aqueous solution

The associative behavior of monodisperse diblock copolymers consisting of a hydrophilic poly(ethylene oxide) block and a hydrophobic poly(epsilon-caprolactone) or poly(gamma-methyl-epsilon-caprolactone) block has been studied in aqueous solution. Copolymers have been directly dissolved in water. The solution properties have been studied by surface tension, in relation to mesoscopic analyses by NMR (self-diffusion coefficients), transmission electron microscopy, and small-angle neutron and X-ray scattering. The experimental results suggest that micellization occurs at low concentration (approximately 0.002 wt %) and results in a mixture of unimers and spherical micelles that exchange slowly. The radius of the micelles has been measured (ca. 11 nm), and the micellar substructure has been extracted from the fitting of the SANS data with two analytical models. The core radius and the aggregation number change with the hydrophobic block length according to scaling laws as reported in the scientific literature. The poly(ethylene oxide) blocks are in a moderately extended conformation in the corona, which corresponds to about 25% of the completely extended chain. No significant modification is observed when poly(gamma-methyl-epsilon-caprolactone) replaces poly(epsilon-caprolactone) in the diblocks.     

Self-organization behavior of methacrylate-based amphiphilic di- and triblock copolymers

Amphiphilic di- and triblock copolymers having different hydrophilic-to-hydrophobic block length ratio were synthesized using ATRP. The self-assembly behavior of these AB and ABA block copolymers consisting of poly(n-butyl methacrylate) (B) and poly(2,2-(dimethylaminoethyl methacrylate) (A) was investigated using a combination of dynamic light scattering, negative-stain transmission electron microscopy, cryoelectron microscopy, and atomic force microscopy. Two populations of self-organized structures in aqueous solution, micelles and compound micelles, were detected for diblock copolymers. Triblock copolymers assembled into vesicular structures of uniform sizes. Furthermore it was found that these vesicles tended to compensate the high curvature by additional organization of the polymer chains outside of the membrane. The chain hydrophilicity of the polymers appeared to have a critical impact on the self-assembly response toward temperature change. The self-reorganization of the polymers at different temperatures is discussed.     

Conductive properties of TiO2/bacterial cellulose hybrid fibres

In this article, we report the first micellization study of amphiphilic copolymers composed of bacterial medium chain length poly(3-hydroxyalkanoates) (mcl-PHAs). A series of diblock copolymers based on fixed poly(ethylene glycol) (PEG) block (5000 g mol(-1)) and a varying poly(3-hydroxyoctanoate-co-3-hydroxyhexanoate) (PHOHHx) segment (1500-7700 g mol(-1)) have been synthesized using "click" chemistry. These copolymers self-assembled to form micelles in aqueous media. The influence of PHOHHx block molar mass on the hydrodynamic size and on the critical micelle concentration (CMC) has been studied using dynamic light scattering and fluorescence spectroscopy, respectively. With increasing PHOHHx length, narrowly distributed micelles with diameters ranging from 44 to 90 nm were obtained, with extremely low CMC (up to 0.85 mg/L). Cryogenic transmission electron microscopy (Cryo-TEM) showed that micelles took on a spherical shape and exhibited narrow polydispersity. Finally, the colloidal stability of the micelles against physiological NaCl concentration has been demonstrated, suggesting they are promising candidates for drug delivery applications.     

Shape transformation of poly(butadiene)‐b‐poly(ethyleneoxide) plus DTAB compound micelles in aqueous solutions

The micellar shape of Poly(butadiene)‐b‐poly(ethyleneoxide) (PB‐PEO) plus Dodecyltrimethylammoniumbromide (DTAB) compound micelles was investigated by light scattering, small‐angle X‐ray scattering and small‐angle neutron scattering in dependence of the molar ratio between block copolymer and surfactant. The given block copolymer forms cylindrical micelles in binary aqueous solution, which transform to spherical aggregates upon the addition of a sufficiently high amount of DTAB. It is interesting to note that the micellar shape seems to be a bistable feature, in the sense that it depends not only on the molar ratio of BCP and DTAB but also in a predictable manner on the preparation procedure of the solution.     

Hybrid polyion complex micelles formed from double hydrophilic block copolymers and multivalent metal ions: size control and nanostructure

Hybrid polyion complex (HPIC) micelles are nanoaggregates obtained by complexation of multivalent metal ions by double hydrophilic block copolymers (DHBC). Solutions of DHBC such as the poly(acrylic acid)-block-poly(acrylamide) (PAA-b-PAM) or poly(acrylic acid)-block-poly(2-hydroxyethylacrylate) (PAA-b-PHEA), constituted of an ionizable complexing block and a neutral stabilizing block, were mixed with solutions of metal ions, which are either monoatomic ions or metal polycations, such as Al(3+), La(3+), or Al(13)(7+). The physicochemical properties of the HPIC micelles were investigated by small angle neutron scattering (SANS) and dynamic light scattering (DLS) as a function of the polymer block lengths and the nature of the cation. Mixtures of metal cations and asymmetric block copolymers with a complexing block smaller than the stabilizing block lead to the formation of stable colloidal HPIC micelles. The hydrodynamic radius of the HPIC micelles varies with the polymer molecular weight as M(0.6). In addition, the variation of R(h) of the HPIC micelle is stronger when the complexing block length is increased than when the neutral block length is increased. R(h) is highly sensitive to the polymer asymmetry degree (block weight ratio), and this is even more true when the polymer asymmetry degree goes down to values close to 3. SANS experiments reveal that HPIC micelles exhibit a well-defined core-corona nanostructure; the core is formed by the insoluble dense poly(acrylate)/metal cation complex, and the diffuse corona is constituted of swollen neutral polymer chains. The scattering curves were modeled by an analytical function of the form factor; the fitting parameters of the Pedersen's model provide information on the core size, the corona thickness, and the aggregation number of the micelles. For a given metal ion, the micelle core radius increases as the PAA block length. The radius of gyration of the micelle is very close to the value of the core radius, while it varies very weakly with the neutral block length. Nevertheless, the radius of gyration of the micelle is highly dependent on the asymmetry degree of the polymer: if the neutral block length increases in a large extent, the micelle radius of gyration decreases due to a decrease of the micelle aggregation number. The variation of the R(g)/R(h) ratio as a function of the polymer block lengths confirms the nanostructure associating a dense spherical core and a diffuse corona. Finally, the high stability of HPIC micelles with increasing concentration is the result of the nature of the coordination complex bonds in the micelle core.     

新型两亲性含糖嵌段聚合物的合成与自组装

以β-环糊精(β-CD)和2-乙基-2-噁唑啉(EtOz)为原料, 通过活性端基化学偶联法制备了乙酰麦芽七糖/聚(2-乙基-2-噁唑啉)两嵌段聚合物(AcMH-b-PEtOz), 借助核磁共振氢谱、红外光谱和凝胶渗透色谱等手段证实了产物的化学结构. 采用核磁共振氢谱、荧光光谱、透射电子显微镜、动态光散射及紫外-可见分光光度等方法探讨了产物在水溶液中的自组装行为. 结果表明, 所得嵌段聚合物直接溶于水后可通过自组装形成纳米球形“核-壳”结构胶束, 同时具有温度响应性. 所得聚合物的临界胶束浓度(cmc)为4~7 mg/L, 平均粒径(d)为83~115 nm, 临界相转变温度(LCST)为49~64 ℃, 并且均可通过PEtOz的链长进行调控.     

Multiple length scale self-organization in liquid crystalline block copolymers

A series of block copolymers were prepared consisting of a block of poly(styrene) and a block in which a mesogenic group was attached by polymer analogous chemistry to a flexible backbone. Two types of mesogenic groups which produced a range of mesophases were investigated: (i) an azobenzene mesogenic group and (ii) a semifluorinated group. Organization caused by liquid crystallinity and phase separation leads to simultaneous organization on a variety of length scales. Comparison of the ordering behavior of these two types of mesogenic groups and more conventional flexible chain diblocks are made.     

Non-ionic amphiphilic block copolymers by RAFT-polymerization and their self-organization

Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.     

Cylindrical micelles from the aqueous self-assembly of an amphiphilic poly(ethylene oxide)-b-poly(ferrocenylsilane) (PEO-b-PFS) block copolymer with a metallo-supramolecular linker at the block junction

A supramolecular AB diblock copolymer has been prepared by the sequential self-assembly of terpyridine end-functionalized polymer blocks by using Ru(III)/Ru(II) chemistry. By this synthetic strategy a hydrophobic poly(ferrocenylsilane) (PFS) was attached to a hydrophilic poly(ethylene oxide) (PEO) block to give an amphiphilic metallo-supramolecular diblock copolymer (PEO/PFS block ratio 6:1). This compound was used to form micelles in water that were characterized by a combination of dynamic and static light scattering, transmission electron microscopy, and atomic force microscopy. These complementary techniques showed that the copolymers investigated form rod-like micelles in water; the micelles have a constant diameter but are rather polydisperse in length, and light scattering measurements indicate that they are flexible. Crystallization of the PFS in these micelles was observed by differential scanning calorimetry, and is thought to be the key behind the formation of rod-like structures. The cylindrical micelles can be cleaved into smaller rods whenever the temperature of the solution is increased or they are exposed to ultrasound.     

Interfacial behaviour of block polyelectrolytes,III. Formation of surface micelles

The aggregation of (poly)styrene/quaternized (poly)-4-vinylpyridine diblocks into regular circular structures has been observed in Langmuir-Blodgett films removed from a pure water surface. These novel aggregates, termed surface micelles, form at low surface pressures (< 2 mN/m) and exhibit rich isotherm behaviour as Langmuir films. A distinct first order phase transition is observed for the decylated derivatives of a series of diblocks (i.e. (PS)₂₆₀(C₁₀PVP⁺I⁻)_n; n = 70, 120, 240) which has been interpreted as a transition from an entirely surface-adsorbed micelle to a surface micelle whose polyelectrolyte chains have been forced into the aqueous subphase. Transmission electron and atomic force micrographs of LB films provide for direct visualization of these surface micelles as well as the means to estimate their aggregation numbers, N.     

Synthesis and Characterization of Amphiphilic Cyclic Diblock Copolypeptoids from N-Heterocyclic Carbene-Mediated Zwitterionic Polymerization of N-Substituted N-carboxyanhydride

N-Heterocyclic carbene (NHC)-mediated ring-opening polymerization of N-decylN-carboxylanhydride monomer (De-NCA) has been shown to occur in a controlled manner, yielding cyclic poly(N-decyl-glycine)s (c-PNDGs) with polymer molecular weights (MW) between 4.8 and 31 kg·mol(-1) and narrow molecular weight distributions (PDI < 1.15). The reaction exhibits pseudo-first order kinetics with respect to monomer concentration. The polymer MW increases linearly with conversion, consistent with a living polymerization. ESI MS and SEC analysesconfirm the cyclic architectures of the forming polymers. DSC and WAXS studies reveal that the c-PNDG homopolymers are highly crystalline with two prominent first order transitions at 72-79°C (T(m,1)) and 166-177°C (T(m,2)), which have been attributed to the side chain and main chain melting respectively. A series of amphiphilic cyclic diblock copolypeptoids [i.e.,poly(N-methyl-glycine)-b-poly(N-decyl-glycine) (c-PNMG-b-PNDG)] with variable molecular weight and composition was synthesized by sequential NHC-mediated polymerization of the corresponding N-methyl N-carboxyanhydride (Me-NCA) and De-NCA monomers. (1)H NMR analysis reveals that adjusting the initial monomer to NHC molar ratio can readily control the block copolymer chain length and composition. Time-lapsed light scattering and cryogenic transmission electron microscopy (cryo-TEM) analysis of c-PNDG-b-PNMG samples revealed that the amphiphilic cyclic block copolypeptoids self-assemble into spherical micelles that reorganize into micron-long cylindrical micelles with uniform diameter in room temperature methanol over the course of several days. An identical morphological transition has also been noted for the linear analogs, which occurs more rapidly than for the cyclic copolypeptoids. We tentatively attribute this difference to the different crystallization kinetics of the solvophobic block (i.e., PNDG) in the cyclic and linear block copolypeptoids.     

Evidence of overcharging in the complexation between oppositely charged polymers and surfactants

We report on the complexation between charged-neutral block copolymers and oppositely charged surfactants studied by small-angle neutron scattering. Two block copolymers/surfactant systems are investigated, poly(acrylicacid)-b-poly(acrylamide) with dodecyltrimethylammonium bromide and poly(trimethylammonium ethylacrylate methylsulfate)-b-poly(acrylamide) with sodium dodecyl sulfate. Two two systems are similar in terms of structure and molecular weight but have different electrostatic charges. The neutron-scattering data have been interpreted in terms of a model that assumes the formation of mixed polymer-surfactant aggregates, also called colloidal complexes. These complexes exhibit a core-shell microstructure, where the core is a dense coacervate microphase of micelles surrounded by neutral blocks. Here, we are taking advantage of the fact that the complexation results in finite-size aggregates to shed some light on the complexation mechanisms. In order to analyze quantitatively the neutron data, we develop two different approaches to derive the number of surfactant micelles per polymer in the mixed aggregates and the distributions of aggregation numbers. With these results, we show that the formation of the colloidal complex is in agreement with overcharging predictions. In both systems, the amount of polyelectrolytes needed to build the core-shell colloids always exceeds the number that would be necessary to compensate the charge of the micelles. For the two polymer-surfactant systems investigated, the overcharging ratios are 0.66+/-0.06 and 0.38+/-0.02.     

Periodic organic–organometallic microdomain structures in poly(styrene‐block‐ferrocenyldimethylsilane) copolymers and blends with corresponding homopolymers

A series of poly(styrene‐block‐ferrocenyldimethylsilane) copolymers (SF) with different relative molar masses of the blocks were prepared by sequential anionic polymerization. The bulk morphology of these polymers, studied by TEM and SAXS, showed well‐ordered lamellar and cylindrical domains as well as disordered micellar structures. Temperature‐dependent rheological measurements exhibited an order–disorder transition for SF 17/8 (the numbers refer to the relative molar masses in 10³ g/mol) between 170 and 180°C, and an order–order transition for SF 9/19 between 190 and 200°C. The morphologies of binary blends of the diblocks with homopolymer were also investigated. In the blends the molar mass of the homopolymer was always less than the molar mass of the matching block. Ordered spheres on a bcc lattice and double‐gyroid morphology were observed for the blends. The double‐gyroid morphology was found only in F‐rich diblock/homopolymer systems. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1009–1021, 1999     

Synthesis and self‐assembly of highly incompatible polybutadiene–poly(hexafluoropropylene oxide) diblock copolymers

A versatile coupling reaction for the preparation of polybutadiene–poly‐(hexafluoropropylene oxide) (BF) diblock copolymers is described. Six diblock copolymers with different block lengths were characterized by nuclear magnetic resonance spectroscopy and size exclusion chromatography; all six had total molecular weights below 15,000. Microphase separation of the block copolymers in the bulk state was established by small‐angle X‐ray scattering (SAXS) and differential scanning calorimetry. SAXS data suggest that the diblocks are characterized by an unusually large Flory‐Huggins interaction parameter, χ, on the order of 10. However, extraction of χ from the order–disorder transition gave large (order 1) but significantly different values, thereby suggesting that these copolymers are too small and too strongly interacting to be described by block copolymer mean‐field theory. Dynamic light scattering was used to analyze dilute solutions of the title block copolymers in four selective organic solvents; the sizes of the micelles formed were solvent dependent. The micellar aggregates were large and nonspherical, and this is also attributed to the high degree of incompatibility between the two immiscible blocks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3685–3694, 2005     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

Synthesis,thermo-responsive micellization and caffeine drug release of novel PBMA-<Emphasis Type="Italic">b</Emphasis>-PNIPAAm block polymer brushes

Brush-like block copolymers with poly(t-butyl methacrylate) (PBMA) and poly(N-isopropylacrylamide) (PNIPAAm) as side arms, PBMA-b-PNIPAAm, were designed and synthesized via a simple free radical polymerization route. The chemical structure and molecular weight of these polymer brushes were characterized and determined by nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectrometry (FTIR) and gel permeation chromatography (GPC). The micellar formation by these polymer brushes in aqueous solutions were detected by a surface tension technique, and the critical micelle concentration (CMC) ranged from 1.53 to 8.06 mg L⁻¹. The morphology and geometry of polymer micelles were investigated by transmission electron microscope (TEM) and dynamic light scattering (DLS). The polymer micelles assume the regularly-spherical core-shell structure with well-dispersed individual nanoparticles, and the particle size was in the range from 36 to 93 nm. The PNIPAAm segments exhibited a thermoreversible phase transition, so the resulting block polymer brushes were temperature-sensitive and the low critical solution temperature (LCST) was determined by UV-vis spectrometer at about 28.82–29.40°C. The characteristic parameters of the polymer micelles such as CMC, micellar size and LCST values were affected by their compositional ratios and the length of hydrophilic or hydrophobic chains. The evaluation for caffeine drug release behavior of the block polymer micelles demonstrated that the self-assembled micelles exhibited thermal-triggered properties in controlled drug release.     

Characterization of EO-PO Block Copolymers by Liquid Chromatography Under Critical Conditions

Summary: Block copolymers of ethylene oxide (EO) and propylene oxide (PO) are characterized by liquid chromatography under critical conditions (LCCC) for EO. At the critical adsorption point (CAP) for one structural unit, the non-critical block can elute in size exclusion (SEC) or adsorption (LAC) mode. Depending on the molar mass and architecture of the polymers, different strategies are applied. For samples with a higher molar mass, the SEC separation is the method of choice, while lower molar masses also allow a LAC separation. Examples for both situations are given, which show, that these approaches yield different information. In the SEC mode, homopolymers and diblocks can be separated from the triblocks. In LAC mode, a baseline resolution of individual oligomers can be achieved, in which homopolymers, diblocks and triblocks with the same number of repeat units of the non-critical block have the same elution volume.     

Synthesis and Self-Assembly Behaviors of Four-Arm Star Block Copolymers Poly(ϵ-caprolactone)-b-poly(2- (diethylamino) ethyl methacrylate)) in Aqueous Solution

Four-arm star block polymers consisting of hydrophobic poly(?-caprolactone) (PCL) block and hydrophilic poly(2-(diethylamino) ethyl methacrylate)) (PDEAEMA) block were successfully synthesized by ring opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Chain lengths of PDEAEMA segments were varied to obtain a series of star copolymers with different hydrophilic/hydrophobic ratio, which were desired for self-assembly study. Dynamic light scattering (DLS) and transmission electron microscopic (TEM) were used to study their self-assembly behavior. In the PBS solution with different pH value, the star polymers formed micelles or nanoparticles. Furthermore, the morphologies of the micelles were also pH-dependent. Critical micelle concentrations of star copolymers changed from 5.0 to 17.5 mg/L with the increase of hydrophilic block length or the pH decrease. Moreover, a steady increase was found on the micelles diameters when the pH decreased from 7.0 to 3.0. The low CMC value and slight changes on micelle diameter indicated that the micelle remained stable under the changing external stimulus.