Effect of organic load on the performance and methane production of an AnSBBR treating effluent from biodiesel production

Currently, there is an increasing demand for the production of biodiesel and, consequently, there will be an increasing need to treat wastewaters resulting from the production process of this biofuel. The main objective of this work was, therefore, to investigate the effect of applied volumetric organic load (AVOL) on the efficiency, stability, and methane production of an anaerobic sequencing batch biofilm reactor applied to the treatment of effluent from biodiesel production. As inert support, polyurethane foam cubes were used in the reactor and mixing was accomplished by recirculating the liquid phase. Increase in AVOL resulted in a drop in organic matter removal efficiency and increase in total volatile acids in the effluent. AVOLs of 1.5, 3.0, 4.5 and 6.0 g COD L⁻¹ day⁻¹ resulted in removal efficiencies of 92%, 81%, 67%, and 50%, for effluent filtered samples, and 91%, 80%, 63%, and 47%, for non-filtered samples, respectively, whereas total volatile acids concentrations in the effluent amounted to 42, 145, 386 and 729 mg HAc L⁻¹, respectively. Moreover, on increasing AVOL from 1.5 to 4.5 g COD L⁻¹ day⁻¹ methane production increased from 29.5 to 55.5 N mL CH₄ g COD⁻¹. However, this production dropped to 36.0 N mL CH₄ g COD⁻¹ when AVOL was increased to 6.0 g COD L⁻¹ day⁻¹, likely due to the higher concentration of volatile acids in the reactor. Despite the higher concentration of volatile acids at the highest AVOL, alkalinity supplementation to the influent, in the form of sodium bicarbonate, at a ratio of 0.5–1.3 g NaHCO₃ g COD_fed⁻¹, was sufficient to maintain the pH near neutral and guarantee process stability during reactor operation.     

NADH screen-printed electrodes modified with zirconium phosphate,Meldola blue,and Reinecke salt. Application to the detection of glycerol by FIA

Bulk screen-printed electrodes (bSPEs) modified with zirconium phosphate (ZrP) and Meldola blue (MB) and by electrochemical deposition of a Reineckate film (bMBZrPRs-SPEs) have been constructed and used as NADH sensors. Cyclic voltammetric investigation of these bulk electrochemically modified screen-printed electrodes revealed stable catalytic activity in oxidation of the reduced form of the coenzyme nicotinamide adenine dinucleotide (NADH). Flow-injection analysis (FIA) coupled with amperometric detection confirmed the improved stability of the bMBZrPRs-SPEs (10⁻⁴ mol L⁻¹ NADH, %RSD = 4.2, n = 90, pH 7.0). Other conditions, for example applied working potential (+50 mV relative to Ag|AgCl), flow rate (0.30 mL min⁻¹) and pH-dependence (range 4.0–10.0) were evaluated and optimized. A glycerol biosensor, prepared by immobilizing glycerol dehydrogenase (GDH) on the working electrode area of a bMBZrPRs-SPE, was also assembled. The biosensor was most stable at pH 8.5 (%RSD = 5.6, n = 70, 0.25 mmol L⁻¹ glycerol). The detection and quantification limits were 2.8 × 10⁻⁶ and 9.4 × 10⁻⁶ mol L⁻¹, respectively, and the linear working range was between 1.0 × 10⁻⁵ and 1.0 × 10⁻⁴ mol L⁻¹. To assess the effect of interferences, and recovery by the probe we analyzed samples taken during fermentation of chemically defined grape juice medium and compared the results with those obtained by HPLC.     

Application of inductively coupled plasma–mass spectrometry (ICP–MS) and quality assurance to study the incorporation of strontium into bone,bone marrow,and teeth of dogs after one month of treatment with strontium malonate

The strontium content of serum, bone, marrow, and teeth was determined by inductively-coupled plasma mass spectrometry (ICP–MS). Significant correlations were obtained after the data were subjected to quality assurance (QA) performed according to validated procedures. After four weeks of treatment with strontium malonate, strontium levels increased from 76 ± 9 μg g⁻¹ in placebo-treated dogs to levels of 7.2 ± 1.7 mg g⁻¹, 9.5 ± 2.7 mg g⁻¹, and 9.8 ± 2.7 mg g⁻¹ in groups treated with 300, 1000, and 3000 mg kg⁻¹ day⁻¹, respectively. Strontium induced a highly significant increase in the bone formation marker, bone-specific alkaline phosphatase (BSAP), and an excellent correlation was found with the bone-strontium content. In females, the placebo-treated group showed a decrease in BSAP of 53%, whereas the three strontium malonate-treated groups showed an increase of 60, 276, and 278% for the groups treated with 300, 1000, and 3000 mg kg⁻¹ day⁻¹, respectively. For males the corresponding values were −44%, +142%, +194%, and +247% increases in BSAP in the placebo, 300, 1000, and 3000 mg kg⁻¹ day⁻¹ groups respectively.     

Rapid residue analysis of four triazolopyrimidine herbicides in soil, water, and wheat by ultra-performance liquid chromatography coupled to tandem mass spectrometry

A sensitive and effective method for simultaneous determination of triazolopyrimidine sulfonamide herbicide residues in soil, water, and wheat was developed using ultra-performance liquid chromatography coupled with tandem mass spectrometry. The four herbicides (pyroxsulam, flumetsulam, metosulam, and diclosulam) were cleaned up with an off-line C18 SPE cartridge and detected by tandem mass spectrometry using an electrospray ionization source in positive mode (ESI+). The determination of the target compounds was achieved in <2.0 min. The limits of detection were below 1 μg kg⁻¹, while the limits of quantification did not exceed 3 μg kg⁻¹ in different matrices. Quantitation was determined from calibration curves of standards containing 0.05–100 μg L⁻¹ with r ² > 0.997. Recovery studies were conducted at three spiked levels (0.2, 1, and 5 μg kg⁻¹ for water; 5, 10, and 100 μg kg⁻¹ for soil and wheat). The overall average recoveries for this method in water, soil, wheat plants, and seeds at three levels ranged from 75.4% to 106.0%, with relative standard deviations in the range of 2.1–12.5% (n = 5) for all analytes.     

Scale up and Application of Biosurfactant from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> in Enhanced Oil Recovery

There is a lack of fundamental knowledge about the scale up of biosurfactant production. In order to develop suitable technology of commercialization, carrying out tests in shake flasks and bioreactors was essential. A reactor with integrated foam collector was designed for biosurfactant production using Bacillus subtilis isolated from agricultural soil. The yield of biosurfactant on biomass (Y _p/x), biosurfactant on sucrose (Y _p/s), and the volumetric production rate (Y) for shake flask were obtained about 0.45 g g⁻¹, 0.18 g g⁻¹, and 0.03 g l⁻¹ h⁻¹, respectively. The best condition for bioreactor was 300 rpm and 1.5 vvm, giving Y _x/s, Y _p/x, Y _p/s, and Y of 0.42 g g⁻¹, 0.595 g g⁻¹, 0.25 g g⁻¹, and 0.057 g l⁻¹ h⁻¹, respectively. The biosurfactant maximum production, 2.5 g l⁻¹, was reached in 44 h of growth, which was 28% better than the shake flask. The obtained volumetric oxygen transfer coefficient (K _L a) values at optimum conditions in the shake flask and the bioreactor were found to be around 0.01 and 0.0117 s⁻¹, respectively. Comparison of K _L a values at optimum conditions shows that biosurfactant production scaling up from shake flask to bioreactor can be done with K _L a as scale up criterion very accurately. Nearly 8% of original oil in place was recovered using this biosurfactant after water flooding in the sand pack.     

Simple sensor for simultaneous determination of dihydroxybenzene isomers

A simple sensor based on bare carbon ionic liquid electrode was fabricated for simultaneous determination of dihydroxybenzene isomers in 0.1 mol L⁻¹ phosphate buffer solution (pH 6.0). The oxidation peak potential of hydroquinone was about 0.136 V, catechol was about 0.240 V, and resorcinol 0.632 V by differential pulse voltammetric measurements, which indicated that the dihydroxybenzene isomers could be separated absolutely. The sensor showed wide linear behaviors in the range of 5.0 × 10⁻⁷–2.0 × 10⁻⁴ mol L⁻¹ for hydroquinone and catechol, 3.5 × 10⁻⁶–1.535 × 10⁻⁴ mol L⁻¹ for resorcinol, respectively. And the detection limits of the three dihydroxybenzene isomers were 5.0 × 10⁻⁸, 2.0 × 10⁻⁷, 5.0 × 10⁻⁷ mol L⁻¹, respectively (S/N = 3). The proposed method could be applied to the determination of dihydroxybenzene isomers in artificial wastewater and the recovery was from 93.9% to 104.6%.     

Multisyringe flow injection analysis hyphenated with liquid core waveguides for the development of cleaner spectroscopic analytical methods: improved determination of chloride in waters

In this work, the hyphenation of the multisyringe flow injection analysis technique with a 100-cm-long pathlength liquid core waveguide has been accomplished. The Cl⁻/Hg(SCN)₂/Fe³⁺ reaction system for the spectrophotometric determination of chloride (Cl⁻) in waters was used as chemical model. As a result, this classic analytical methodology has been improved, minimizing dramatically the consumption of reagents, in particular, that of the highly biotoxic chemical Hg(SCN)₂. The proposed method features a linear dynamic range composed of two steps between (1) 0.2–2 and (2) 2–8 mg Cl⁻ L⁻¹, thus extended applicability due to on-line sample dilution (up to 400 mg Cl⁻ L⁻¹). It also presents improved limits of detection and quantification of 0.06 and 0.20 mg Cl⁻ L⁻¹, respectively. The coefficient of variation and the injection throughput were 1.3% (n = 10, 2 mg Cl⁻ L⁻¹) and 21 h⁻¹. Furthermore, a very low consumption of reagents per Cl⁻ determination of 0.2 μg Hg(II) and 28 μg Fe³⁺ has been achieved. The method was successfully applied to the determination of Cl⁻ in different types of water samples. Finally, the proposed system is critically compared from a green analytical chemistry point of view against other flow systems for the same purpose.     

Fast screening immunoassay of sulfonamides in commercial fish samples

An indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed in plate to detect three sulfonamide residues (sulfamerazine (SMR), sulfadimetoxine (SDM), and sulfadiazine (SDZ)) in gilthead sea bream (Sparus aurata) samples. Different extraction methodologies—using methanol/water 1:1 (v/v) + ethylene diamine tetraacetic acid (EDTA) 0.5% (m/v), acetonitrile, phosphate-buffered saline (PBS) 10 mmol L⁻¹ pH 7 and acetate buffer 100 mmol L⁻¹ pH 5—and cleanup steps, based on solid-phase extraction (C₁₈, SCX, Si) or liquid extraction with hexane, were assayed. As optimum, a fast and simple method using acetonitrile was selected to extract the sulfonamide residues from the edible muscle of fish. Due to matrix effects, a standard addition calibration curve in fish extract is necessary for quantification purposes. Sulfonamide-free samples were spiked at different concentration levels (between 30 and 90 ng g⁻¹, 5–15 ng mL⁻¹ in plate) and average recoveries (n = 8), ranging from 71% to 95%, 65% to 79%, and 72% to 95%, were obtained for SMR, SDM, and SDZ, respectively. The assay detection limits for these antibiotics were lower than 100 μg kg⁻¹ (maximum residue level established by the European Union). The accuracy was evaluated by spiking blank fish extracts at different concentrations (10–40 ng mL⁻¹, 5–20 ng mL⁻¹ in plate), and the relative errors ranged between ±20%. Finally, in order to confirm the utility of the developed ELISA as a screening methodology, fish samples from different supermarkets were analyzed, and results were compared with those obtained by a validated high-performance liquid chromatography (HPLC) method. The correlation between the results obtained by both ELISA and HPLC methods is satisfactory.      

Production and analytical characterization of neopterin immunoreagents for biosensor developments

Neopterin is a valuable biomarker of cellular immunity associated with various pathological situations such as viral and bacterial infections, autoimmune, cardiovascular, neurodegenerative and malignant disorders. To produce specific antibodies against neopterin for a rapid multi-biomarker-based diagnosis, a novel hapten derivative was synthesized and attached to carrier proteins. The thoroughly characterized conjugates were used for immunization of BALB/c mice and rabbits. The produced monoclonal antibody reached in both direct and indirect enzyme-linked immunosorbent assay (ELISA) format LoD of 0.18 and 0.45 μg L⁻¹, respectively, and was a superior immunoreagent for further biosensor developments with regard to assay sensitivity and material availability. The best polyclonal antibody was somewhat more sensitive in direct ELISA with LoD of 0.05 μg L⁻¹. The optimized ELISA method was evaluated with blood samples collected from patients with renal insufficiency, patients with sepsis, patients without confirmed clinical diagnosis, and healthy volunteers. In plasma samples, neopterin concentrations ranging from 3.2 to 103 μg L⁻¹ could be determined with the monoclonal ELISA whereas twofold lower results were obtained with the polyclonal ELISA. A satisfactory correlation of results was found between the polyclonal ELISA and IBL Neopterin ELISA kit within the concentration range 0.5–16 μg L⁻¹ (R = 0.874; n = 40), and slightly lower correlation was found for monoclonal-based ELISA (R = 0.819; n = 40). These data show that the generated antibodies may be used as functional analytical reagents for the integration into multianalyte biochip detection systems.     

Electrocatalytic oxidation of nitrite at a terpyridine manganese(II) complex modified carbon past electrode

A carbon past electrode modified with [Mn(H₂O)(N₃)(NO₃)(pyterpy)], ( \textpyterpy = 4￠- ( 4 - \textpyridyl ) - 2,2￠:\text6￠,\text2￠￠- \textterpyridine ) \left( {{\text{pyterpy}} = 4\prime - \left( {4 - {\text{pyridyl}}} \right) - 2,2\prime:{\text{6}}\prime,{\text{2}}\prime\prime - {\text{terpyridine}}} \right) complex have been applied to the electrocatalytic oxidation of nitrite which reduced the overpotential by about 120 mV with obviously increasing the current response. Relative standard deviations for nitrite determination was less than 2.0%, and nitrite can be determined in the ranges of 5.00 × 10⁻⁶ to 1.55 × 10⁻² mol L⁻¹, with a detection limit of 8 × 10⁻⁷ mol L⁻¹. The treatment of the voltammetric data showed that it is a pure diffusion-controlled reaction, which involves one electron in the rate-determining step. The rate constant k′, transfer coefficient α for the catalytic reaction, and diffusion coefficient of nitrite in the solution, D, were found to be 1.4 × 10⁻², 0.56× 10⁻⁶, and 7.99 × 10⁻⁶ cm² s⁻¹, respectively. The mechanism for the interaction of nitrite with the Mn(II) complex modified carbon past electrode is proposed. This work provides a simple and easy approach to detection of nitrite ion. The modified electrode indicated reproducible behavior, anti-fouling properties, and stability during electrochemical experiments, making it particularly suitable for the analytical purposes.     

Acetylcholinesterase-based biosensors for quantification of carbofuran, carbaryl, methylparaoxon, and dichlorvos in 5% acetonitrile

Amperometric acetylcholinesterase biosensors have been developed for quantification of the pesticides carbofuran, carbaryl, methylparaoxon, and dichlorvos in phosphate buffer containing 5% acetonitrile. Three different biosensors were built using three different acetylcholinesterase (AChE) enzymes—AChE from electric eel, and genetically engineered (B394) and wild-type (B1) AChE from Drosophila melanogaster. Enzymes were immobilized on cobalt(II) phthalocyanine-modified electrodes by entrapment in a photocrosslinkable polymer (PVA-AWP). Each biosensor was tested against the four pesticides. Good operational stability, immobilisation reproducibility, and storage stability were obtained for each biosensor. The best detection limits were obtained with the B394 enzyme for dichlorvos and methylparaoxon (9.6 × 10⁻¹¹ and 2.7 × 10⁻⁹ mol L⁻¹, respectively), the B1 enzyme for carbofuran (4.5 × 10⁻⁹ mol L⁻¹), and both the B1 enzyme and the AChE from electric eel for carbaryl (1.6 × 10⁻⁷ mol L⁻¹). Finally, the biosensors were used for the direct detection of the pesticides in spiked apple samples.     

Dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry for the rapid and sensitive determination of UV filters in environmental water samples

The performance of the dispersive liquid–liquid microextraction (DLLME) technique for the determination of eight UV filters and a structurally related personal care species, benzyl salicylate (BzS), in environmental water samples is evaluated. After extraction, analytes were determined by gas chromatography combined with mass spectrometry detection (GC-MS). Parameters potentially affecting the performance of the sample preparation method (sample pH, ionic strength, type and volume of dispersant and extractant solvents) were systematically investigated using both multi- and univariant optimization strategies. Under final working conditions, analytes were extracted from 10 mL water samples by addition of 1 mL of acetone (dispersant) containing 60 μL of chlorobenzene (extractant), without modifying either the pH or the ionic strength of the sample. Limits of quantification (LOQs) between 2 and 14 ng L⁻¹, inter-day variability (evaluated with relative standard deviations, RSDs) from 9% to 14% and good linearity up to concentrations of 10,000 ng L⁻¹ were obtained. Moreover, the efficiency of the extraction was scarcely affected by the type of water sample. With the only exception of 2-ethylhexyl-p-dimethylaminobenzoate (EHPABA), compounds were found in environmental water samples at concentrations between 6 ± 1 ng L⁻¹ and 26 ± 2 ng mL⁻¹.     

A green flow-based procedure for fluorimetric determination of acid-dissociable cyanide in natural waters exploiting multicommutation

A flow system designed with solenoid valves is proposed for determination of weak acid dissociable cyanide, based on the reaction with o-phthalaldehyde (OPA) and glycine yielding a highly fluorescent isoindole derivative. The proposed procedure minimizes the main drawbacks related to the reference batch procedure, based on reaction with barbituric acid and pyridine followed by spectrophotometric detection, i.e., use of toxic reagents, high reagent consumption and waste generation, low sampling rate, and poor sensitivity. Retention of the sample zone was exploited to increase the conversion rate of the analyte with minimized sample dispersion. Linear response (r = 0.999) was observed for cyanide concentrations in the range 1–200 μg L⁻¹, with a detection limit (99.7% confidence level) of 0.5 μg L⁻¹ (19 nmol L⁻¹). The sampling rate and coefficient of variation (n = 10) were estimated as 22 measurements per hour and 1.4%, respectively. The results of determination of weak acid dissociable cyanide in natural water samples were in agreement with those achieved by the batch reference procedure at the 95% confidence level. Additionally to the improvement in the analytical features in comparison with those of the flow system with continuous reagent addition (sensitivity and sampling rate 90 and 83% higher, respectively), the consumption of OPA was 230-fold lower.     

Detection of beryllium in digested autopsy tissues by inductively coupled plasma mass spectrometry using a high matrix interface configuration

This article describes a robust methodology using the combination of instrumental design (high matrix interface—HMI), sample dilution and internal standardization for the quantification of beryllium (Be) in various digested autopsy tissues using inductively coupled plasma mass spectrometry. The applicability of rhodium as a proper internal standard for Be was demonstrated in three types of biological matrices (i.e., femur, hair, lung tissues). Using HMI, it was possible to achieve instrumental detection limits and sensitivity of 0.6 ng L⁻¹ and 157 cps L ng⁻¹, respectively. Resilience to high salt matrices of the HMI setup was also highlighted using bone mimicking solution ([Ca²⁺] = 26 to 1,400 mg L⁻¹), providing a 14-fold increase in tolerance and a 2.7-fold decrease in method detection limit compared to optimized experimental conditions obtained without the HMI configuration. Precision of the methodology to detect low levels of Be in autopsy samples was demonstrated using hair and blood certified reference materials. Be concentration ranging from 0.015 to 255 μg kg⁻¹ in autopsy samples obtained from the U.S. Transuranium and Uranium Registries were measured using the methodology presented.     

Sensitive voltammetric sensor of dihydromyricetin based on Nafion/SWNT-modified glassy carbon electrode

A novel voltammetric sensor, based on single-walled carbon nanotubes (SWNT) dispersed in Nafion and modified glassy carbon electrode (GCE), was fabricated and used to determine the trace amounts of dihydromyricetin (DMY). The electrochemical behavior of DMY at this sensor was investigated in 0.1 mol L⁻¹ sulfuric acid solutions + 0.1 mol L⁻¹ NaCl by cyclic voltammetry and squarewave voltammetry. Compared with bare GCE, the electrode presented an excellent response of DMY through an adsorption-controlled quasi-reversible process. Under the optimum conditions, the response peak currents were linear relationship with the DMY concentrations in the range of 1.0 × 10⁻⁷–1.0 × 10⁻⁵ mol L⁻¹ with a detection limit of 9 × 10⁻⁸ mol L⁻¹. Based on this voltammetric sensor, a simple and sensitive electroanalytical method for DMY was proposed and applied to quantitative determination of DMY in Ampelopsis grossedentata samples. In addition, the oxidation mechanism was proposed and discussed, which could be a reference for the pharmacological action of DMY in clinical study.     

Determination of thiocyanate ions at nanolevel in real samples using coated graphite electrode based on synthesised macrocyclic Zn(II) complex

The electrode characteristics and selectivities of PVC-based thiocyanate selective polymeric membrane electrode (PME) incorporating the newly synthesized zinc complex of 6,7:14,15-Bzo₂-10,11-(4-methylbenzene)-[15]-6,8,12,14-tetraene-9,12-N₂-1,5-O₂ (I ₁ ) and zinc complex of 6,7:14,15-Bzo₂-10,11-(4-methylbenzene)-[15]-6,14-diene-9,12-dimethylacrylate-9,12-N₂-1,5-O₂ (I ₂ ) are reported here. The best response was observed with the membrane having a composition of I₂:PVC:o-NPOE:HTAB in the ratio of 6:33:59:2 (w/w; milligram). This electrode exhibited Nernstian slope for thiocyanate ions over working concentration range of 4.4 × 10⁻⁷ to 1.0 × 10⁻² mol L⁻¹ with detection limit of 2.2 × 10⁻⁷ mol L⁻¹. The performance of this electrode was compared with coated graphite electrode (CGE), which showed better response characteristics w.r.t Nernstian slope 59.0 ± 0.2 mV decade⁻¹ activity, wide concentration range of 8.9 × 10⁻⁸ to 1.0 × 10⁻² mol L⁻¹ and detection limit of 6.7 × 10⁻⁸ mol L⁻¹. The response time for CGE and PME was found to be 8 and 10 s, respectively. The proposed electrode (CGE) was successfully applied to direct determination of thiocyanate in biological and environmental samples and also as indicator electrode in potentiometric titration of SCN⁻ ion.     

Development of a sequential injection–square wave voltammetry method for determination of paraquat in water samples employing the hanging mercury drop electrode

This work describes the development and optimization of a sequential injection method to automate the determination of paraquat by square-wave voltammetry employing a hanging mercury drop electrode. Automation by sequential injection enhanced the sampling throughput, improving the sensitivity and precision of the measurements as a consequence of the highly reproducible and efficient conditions of mass transport of the analyte toward the electrode surface. For instance, 212 analyses can be made per hour if the sample/standard solution is prepared off-line and the sequential injection system is used just to inject the solution towards the flow cell. In-line sample conditioning reduces the sampling frequency to 44 h⁻¹. Experiments were performed in 0.10 M NaCl, which was the carrier solution, using a frequency of 200 Hz, a pulse height of 25 mV, a potential step of 2 mV, and a flow rate of 100 μL s⁻¹. For a concentration range between 0.010 and 0.25 mg L⁻¹, the current (i _p, μA) read at the potential corresponding to the peak maximum fitted the following linear equation with the paraquat concentration (mg L⁻¹): i _p = (−20.5 ± 0.3)C _paraquat − (0.02 ± 0.03). The limits of detection and quantification were 2.0 and 7.0 μg L⁻¹, respectively. The accuracy of the method was evaluated by recovery studies using spiked water samples that were also analyzed by molecular absorption spectrophotometry after reduction of paraquat with sodium dithionite in an alkaline medium. No evidence of statistically significant differences between the two methods was observed at the 95% confidence level.     

Buffer Standards for pH Measurement of N-(2-Hydroxyethyl)piperazine-N′-2-ethanesulfonic Acid (HEPES) for I=0.16 mol⋅kg−1 from 5 to 55 °C

The values of the second dissociation constant, pK ₂, of N-(2-hydroxyethyl) piperazine-N′-2-ethanesulfonic acid (HEPES) have been reported at twelve temperatures over the temperature range 5 to 55 °C, including 37 °C. This paper reports the results for the pa _H of eight isotonic saline buffer solutions with an I=0.16 mol⋅kg⁻¹ including compositions: (a) HEPES (0.01 mol⋅kg⁻¹) + NaHEPES (0.01 mol⋅kg⁻¹) + NaCl (0.15 mol⋅kg⁻¹); (b) HEPES (0.02 mol⋅kg⁻¹) + NaHEPES (0.02 mol⋅kg⁻¹) + NaCl (0.14 mol⋅kg⁻¹); (c) HEPES (0.03 mol⋅kg⁻¹) + NaHEPES (0.03 mol⋅kg⁻¹) + NaCl (0.13 mol⋅kg⁻¹); (d) HEPES (0.04 mol⋅kg⁻¹) + NaHEPES (0.04 mol⋅kg⁻¹) + NaCl (0.12 mol⋅kg⁻¹); (e) HEPES (0.05 mol⋅kg⁻¹) + NaHEPES (0.05 mol⋅kg⁻¹) + NaCl (0.11 mol⋅kg⁻¹); (f) HEPES (0.06 mol⋅kg⁻¹) + NaHEPES (0.06 mol⋅kg⁻¹) + NaCl (0.10 mol⋅kg⁻¹); (g) HEPES (0.07 mol⋅kg⁻¹) + NaHEPES (0.07 mol⋅kg⁻¹) + NaCl (0.09 mol⋅kg⁻¹); and (h) HEPES (0.08 mol⋅kg⁻¹) + NaHEPES (0.08 mol⋅kg⁻¹) + NaCl (0.08 mol⋅kg⁻¹). Conventional pa _H values, for all eight buffer solutions from 5 to 55 °C, have been calculated. The operational pH values with liquid junction corrections, at 25 and 37 °C have been determined based on the NBS/NIST standard between the physiological phosphate standard and four buffer solutions. These are recommended as pH standards for physiological fluids in the range of pH = 7.3 to 7.5 at I=0.16 mol⋅kg⁻¹.     

Determination of free glycerol in biodiesel at a platinum oxide surface using potential cycling technique

A novel, inexpensive and fast method based on the electrooxidation of glycerol on platinum electrodes by the potential cycling technique has been designed for the determination of free glycerol in biodiesel. A wide range of linearity was achieved between 15 and 150 mg L⁻¹ (0.16 and 1.6 mmol L⁻¹), which corresponds to concentrations ranging between 56 and 560 mg kg⁻¹ (glycerol:biodiesel) for an extraction using 2 g biodiesel. A method for the fast extraction of glycerol from biodiesel with water followed by elimination of organic interferents has also been developed, so that the novel determination method can be applied to various biodiesel samples. The excellent repeatability allows determination of glycerol in numerous samples, with no need for recalibration.     

A compact miniaturized continuous flow system for the determination of urea content in milk

A multicommutation-based flow system with photometric detection was developed, employing an analytical microsystem constructed with low temperature co-fired ceramics (LTCC) technology, a solid-phase reactor containing particles of Canavalia ensiformis DC (urease source) immobilized with glutaraldehyde, and a mini-photometer coupled directly to the microsystem which monolithically integrates a continuous flow cell. The determination of urea in milk was based on the hydrolysis of urea in the solid-phase reactor and the ammonium ions produced were monitored using the Berthelot reaction. The analytical curve was linear in the urea concentration range from 1.0 × 10⁻⁴ to 5.0 × 10⁻³ mol L⁻¹ with a limit of detection of 8.0 × 10⁻⁶ mol L⁻¹. The relative standard deviation (RSD) for a 2.0 × 10⁻³ mol L⁻¹ urea solution was lower than 0.4% (n = 10) and the sample throughput was 13 h⁻¹. To check the reproducibility of the flow system, calibration curves were obtained with freshly prepared solutions on different days and the RSD obtained was 4.7% (n = 6). Accuracy was assessed by comparing the results of the proposed method with those from the official procedure and the data are in close agreement, at a 95% confidence level.