医用质子加速器注入器7 MeV漂移管直线加速器的设计

 针对质子治癌直线加速器功耗少、长度短的要求,设计了一台工作频率为324 MHz的漂移管型质子直线加速器(DTL)。该DTL把粒子从2.5 MeV加速到7 MeV,功耗为265 kW, 总长1.9 m。横向聚焦采用FODO结构,漂移管内放置永磁铁。提出一种新的束流匹配方案,在射频四极场加速器(RFQ)与DTL之间不设束运线,而是以 DTL入口处的4个单元为匹配段,把RFQ出口处相椭圆匹配到DTL周期结构入口处的相椭圆。 用PARMILA程序对该DTL进行了动力学模拟,结果表明该方案的束流发射度增长很小。     

中国散裂中子源直线射频功率源系统的研制

中国散裂中子源加速器质子束流加速能量为1.6 GeV,重复频率为25 Hz,撞击固体金属靶产生散射中子,一期工程的打靶束流功率为100 kW。直线加速器的设计束流流强为15 mA,输出能量为81 MeV。射频加速和聚束系统包括一台射频四极场加速器、中能束流传输线的两个聚束器、四节漂移管直线加速器加速腔和直线-环束流传输线的一个散束器,与之相对应,共有8个单元在线运行的射频功率源为其提供所需的射频功率。目前,直线射频功率源系统预研项目已全部完成,各项性能参数均已达到设计指标,当前正处在批产安装调试阶段。151013     

医用质子直线加速器的设计研究

讨论用于治癌的低束流高能量质子直线加速器的初步物理设计.采用短脉冲和高重复频率的S波段的加速结构,类似于医用电子直线加速器.总长26m,由离子源、RFQ、DTL、SCDTL及SCL组成,能量经70—200MeV有八档可调,平均束流强度10—40nA.     

国产首台交变相位聚焦漂移管加速器的冷测与试运行

质子直线注入器是质子治癌系统的重要组成部分。出于项目进度的考虑,上海先进质子治癌示范装置APTRON采用了进口自美国的直线注入器。为了加快质子治癌产业进程,掌握质子放疗关键技术,保证产业链安全可控,注入器团队研发了国产医用质子直线注入器。该直线注入器采用了电子回旋共振（ECR）离子源和四翼型射频四极加速器（RFQ）的技术方案,并在漂移管加速器（DTL）段创新性地采用了交变相位聚焦（APF）结构。在这个过程中,通过研究APF DTL的束流运动规律和设计思想,自主开发了APF DTL的底层物理设计软件,相继完成了物理设计、电磁设计、机械设计、加工建造、腔体冷测、高频老练和载束实验等多个阶段的工作,最终成功引出了7 MeV、7 mA的质子束流。经过束诊系统的测量分析,认定束流中心能量为6.975 MeV,动量分散在±0.35%以内的束流流强为6.07 mA。成为国产首台医用质子直线注入器和首个实现成功载束的APF加速腔。     

ATPF—a dedicated proton therapy facility

A proton therapy facility based on a linac injector and a slow-cycling synchrotron is proposed. To obtain good treatments for different cancer types, both the spot scanning method and the double-scattering method are adopted in the facility, whereas the nozzles include both gantry and fixed beam types. The proton accelerator chain includes a synchrotron of 250 MeV in maximum energy, an injector of 7 MeV consisting of an RFQ and a DTL linac, with a repetition rate of 0.5 Hz. The slow extraction using the third-order resonance and together with the RFKO method is considered to be a good method to obtain a stable and more-or-less homogenous beam spill. To benefit the spot scanning 200 between 60 MeV and 230 MeV. A new method method, the extraction energy can be as many as about - the emittance balancing technique of using a solenoid or a quadrupole rotator is proposed to solve the problem of unequal emittance in the two transverse planes with a beam slowly extracted from a synchrotron. The facility has been designed to keep the potential to be upgraded to include the carbon therapy in the future.     

SSC直线注入器RFQ腔体多物理场分析

SSC-LINAC是为兰州重离子研究装置（HIRFL）设计的直线注入器,它将U34+离子加速到1 MeV/u注入到分离扇回旋加速器（SSC）中,为冷却储存环（CSR）提供10 MeV/u的U34+。该注入器可以将SSC引出的重离子流强提高一个量级以上。SSC-LINAC由一个RFQ（Radio Frequency Quadrupole）加速器和4个DTL（drift tube linac）组成,设计频率为53.667 MHz。RFQ工作在连续波模式,设计功率30 kW,如果不能有效地冷却,高频电流在电极表面产生的热量会使RFQ的腔壁和电极发生形变,从而导致腔体频率的漂移以及加速和聚焦电场的改变。因此,为了保证连续波工作的RFQ加速器稳定运行,对水冷模式和通道设计提出了很高的要求。作者用有限元软件ANSYS对RFQ进行高频电磁场、温度场、结构应力的耦合分析,验证了冷却方案设计的可行性和可靠性。Heavy Ion Research Facility at Lanzhou(HIRFL) consists of SFC, SSC, CSRm and CSRe. A new linac injector, which will increase U34+ to 1 MeV/u, is designed for SSC to increase the beam intensity to ten times higher. The new injector, whose frequency is 53.667 MHz, is composed by a RFQ (Radio Frequency Quadrupole) cavity and four DTL(Drift Tube Linac) cavities. The RFQ cavity, whose RF power is 30 kW, is operated at CW(continuous wave) mode. The heat produced by HF (high frequency) electromagnetic will cause deformation of RFQ structure, lead to the resonant frequency shift, and reduce the focusing efficiency of the cavity. An efficient cooling system is necessary to ensure that the RFQ cavity can stably be operated at the nominal frequency. A detailed multi-physics field coupling analysis of RFQ has been finished with 3D finite elements software ANSYS. The result of the analysis shows that the water cooling system can cool the RFQ cavity fully and keep the frequency drift be in a acceptable level.     

Accelerator development in India for ADS programme

At BARC, development of a Low Energy High Intensity Proton Accelerator (LEHIPA), as front-end injector of the 1 GeV accelerator for the ADS programme, has been initiated. The major components of LEHIPA (20 MeV, 30 mA) are a 50 keV ECR ion source, a 3 MeV Radio Frequency Quadrupole (RFQ) and a 20 meV drift tube linac (DTL). The Low Energy Beam Transport (LEBT) and Medium Energy Beam Transport (MEBT) lines match the beam from the ion source to RFQ and from RFQ to DTL respectively. Design of these systems has been completed and fabrication of their prototypes has started. Physics studies of the 20–1000 MeV part of the Linac are also in progress. In this paper, the present status of this project is presented.      

Design study of a radio-frequency quadrupole for high-intensity beams

The Rare isotope Accelerator Of Newness(RAON) heavy-ion accelerator has been designed for the Rare Isotope Science Project(RISP) in Korea. The RAON will produce heavy-ion beams from 660-MeV-proton to200-MeV/u-uranium with continuous wave(CW) power of 400 k W to support research in various scientific fields.Its system consists of an ECR ion source, LEBTs with 10 ke V/u, CW RFQ accelerator with 81.25 MHz and 500 ke V/u, a MEBT system, and a SC linac. In detail, the driver linac system consists of a Quarter Wave Resonator(QWR) section with 81.25 MHz and a Half Wave Resonator(HWR) section with 162.5 MHz, Linac-1, and a Spoke Cavity section with 325 MHz, Linac-2. These linacs have been designed to optimize the beam parameters to meet the required design goals. At the same time, a light-heavy ion accelerator with high-intensity beam, such as proton,deuteron, and helium beams, is required for experiments. In this paper, we present the design study of the high intensity RFQ for a deuteron beam with energies from 30 ke V/u to 1.5 MeV/u and currents in the m A range. This system is composed of an Penning Ionization Gauge ion source, short LEBT with a RF deflector, and shared SC Linac. In order to increase acceleration efficiency in a short length with low cost, the 2nd harmonic of 162.5 MHz is applied as the operation frequency in the D~+RFQ design. The D~+RFQ is designed with 4.97 m, 1.52 bravery factor. Since it operates with 2nd harmonic frequency, the beam should be 50% of the duty factor while the cavity should be operated in CW mode, to protect the downstream linac system. We focus on avoiding emittance growth by the space-charge effect and optimizing the RFQ to achieve a high transmission and low emittance growth. Both the RFQ beam dynamics study and RFQ cavity design study for two and three dimensions will be discussed.     

ADS注入器Ⅰ高频四极场功率源系统研制

ADS注入器Ⅰ高频四极场(RFQ)功率源系统将为325MHz RFQ提供连续波功率,使束流离开RFQ时,其能量达到几MeV。功率源系统除了补偿RFQ腔耗外,还必须提供足够的功率以保证RFQ中的加速电场。ADS注入器ⅠRFQ功率源系统主要包括600kW连续波速调管、80kV/18A基于脉冲步进调制技术的PSM电源、环流器以及相应的波导传输系统等。根据ADS总体指标和RFQ的相关技术参数,提出了功率源的总体布局、技术指标以及设计要求等,在此基础上完成系统安装与调试,并通过专家组测试与验收。     

Physics design of a CW high-power proton Linac for accelerator-driven system

Accelerator-driven systems (ADS) have evoked lot of interest the world over because of their capability to incinerate the MA (minor actinides) and LLFP (long-lived fission products) radiotoxic waste and their ability to utilize thorium as an alternative nuclear fuel. One of the main subsystems of ADS is a high energy (∼1 GeV) and high current (∼30 mA) CW proton Linac. The accelerator for ADS should have high efficiency and reliability and very low beam losses to allow hands-on maintenance. With these criteria, the beam dynamics simulations for a 1 GeV, 30 mA proton Linac has been done. The Linac consists of normal-conducting radio-frequency quadrupole (RFQ), drift tube linac (DTL) and coupled cavity drift tube Linac (CCDTL) structures that accelerate the beam to about 100 MeV followed by superconducting (SC) elliptical cavities, which accelerate the beam from 100 MeV to 1 GeV. The details of the design are presented in this paper.     

ATPF–a dedicated proton therapy facility

A proton therapy facility based on a linac injector and a slow-cycling synchrotron is proposed. To obtain good treatments for different cancer types, both the spot scanning method and the double-scattering method are adopted in the facility, whereas the nozzles include both gantry and fixed beam types. The proton accelerator chain includes a synchrotron of 250 MeV in maximum energy, an injector of 7 MeV consisting of an RFQ and a DTL linac, with a repetition rate of 0.5 Hz. The slow extraction using the third-order resonance and together with the RFKO method is considered to be a good method to obtain a stable and more-or-less homogenous beam spill. To benefit the spot scanning method, the extraction energy can be as many as about 200 between 60 MeV and 230 MeV. A new method – the emittance balancing technique of using a solenoid or a quadrupole rotator is proposed to solve the problem of unequal emittance in the two transverse planes with a beam slowly extracted from a synchrotron. The facility has been designed to keep the potential to be upgraded to include the carbon therapy in the future.     

硼中子俘获治疗实验装置射频功率源系统

中国科学院高能物理研究所建造了一台基于加速器的硼中子俘获治疗（BNCT）实验装置。射频功率源系统为352.2 MHz射频四极加速器（RFQ）提供高频功率,使束流离开RFQ时,其能量达到3.5 MeV。BNCT射频功率源系统主要包括速调管功率源、数字低电平控制系统、射频传输系统。本文介绍了BNCT射频功率源系统,主要包括物理需求、系统组成、关键设备、安装和调试。目前该装置已进行动物实验,加速器打靶束流功率4.3 kW,加速器射频功率源系统运行稳定。     

Tuning of RF amplitude and phase for the drift tube linac in J-PARC

The J-PARC linac has three DTL tanks to accelerate the negative hydrogen ions from 3 MeV to 50 MeV. The RF phase and amplitude are adjusted for each cavity with a phase scan method within the accuracy of 1°in phase and 1% in amplitude. The experimental results show a remarkable agreement with the numerical model within a sufficient margin in the tuning of the last two DTL tanks. However, a notable discrepancy between the experiment and the numerical model is seen in the tuning of the first DTL tank. After studying with a three-dimensional multi-particle simulation, the generation of the low energy component and the pronounced filamentation are identified as the main causes of the discrepancy. The optimization of the tuning scheme is also discussed to attain the tuning goal accuracy for the first DTL tank.     

Preliminary design studies of a 100 MeV H−/H+ LINAC as injector for SNS synchrotron/ADS LINAC

It is proposed to construct a spallation neutron source (SNS) at Centre for Advanced Technology (CAT) based on a 1 GeV proton synchrotron with 100 MeV H⁻ LINAC as injector. Additionally, the LINAC can form the first 100 MeV part of a 1 GeV proton LINAC to be built in future for accelerator driven system (ADS) applications. We are exploring a configuration of the 100 MeV LINAC which will consist of an H⁻ ion source, a 4–6 MeV RFQ followed either by a 20 MeV drift tube LINAC (DTL) and 100 MeV separated function drift tube LINAC (SDTL) or a coupled cavity drift tube LINAC (CCDTL) structure. In this paper, we present the results of our preliminary physics design studies of the RFQ-SDTL, RFQ-CCDTL and RFQ-DTL-SDTL configurations. The design of the 4.5 MeV RFQ is discussed along with the matching sections between the RFQ-SDTL/DTL and RFQ-CCDTL. The choice of the accelerator configuration and that of various parameters of the individual accelerator structures under consideration are discussed. The design objectives are to arrive at a configuration which eases heat removal for CW operation and which is less prone to halo formation in order to reduce the beam loss at higher energies.     

The ISAC post-accelerator

The acceleration chain of the ISAC facility boosts the energy of both radioactive and stable light and heavy ions for beam delivery to both a medium energy area in ISAC-I and a high energy area in ISAC-II. The post-accelerator comprises a 35.4 MHz RFQ to accelerate beams of A/q ≤ 30 from 2 keV/u to 150 keV/u and a post stripper, 106.1 MHz variable energy drift tube linac (DTL) to accelerate ions of A/q ≤ 6 to a final energy between 0.15 MeV/u to 1.5 MeV/u. A 40 MV superconducting linac further accelerates beam from 1.5 MeV/u to energies above the Coulomb barrier. All linacs operate cw to preserve beam intensity.     

The design simulation of the superconducting section in the ADS injector Ⅱ

The high-current superconducting proton linac is being studied for the accelerator-driven system (ADS) project undertaken by the Chinese Academy of Sciences. The injector Ⅱ will be operated at 162.5 MHz, and the proton out from the RFQ with an energy of 2.5 MeV will be accelerated to 10 MeV by two cryo-modules, which are composed of eight superconducting half wave resonance cavities and nine solenoids. In this paper, the design and beam simulation of the superconducting section of the injector Ⅱ, the acceptance calculation and a stability analysis are presented.     

an Introduction to Mebt For JKJ and Its Upgrade Design

The medium-energy beam-transport line (MEBT) plays an important role in reducing the beam loss in the Japan Proton Accelerator Research Complex (J-PARC). A MEBT was designed and constructed,with good beam matching and lower beam loss. A brief introduction to the MEBT and its beam test results are given. To further reduce the beam loss during the transient time of the chopper,a medium-energy beamtransport line with an anti-chopper has been designed. It accomplishes three tasks: matching the beam from the RFQ to the acceptance of the DTL, chopping the beam to produce gaps for injection into the rapid cycling ring which follows the linac, and returning the partially deflected beam back to the acceptance of the DTL. An RF chopper and an anti-chopper have been adopted in the beam line, and the optimization of the design of the chopper cavity is discussed. Details of the beam dynamics analysis are given.     

RF power coupling for the CSNS DTL

The China Spallation Neutron Source (CSNS) drift tube linac (DTL) consists of four tanks and each tank is fed by a 2.5 MW klystron. Accurate predication of RF coupling between the RF cavity and ports is very important for DTL RF coupler design. An iris-type coupler is chosen to couple the RF power to the DTL accelerating cavity. The physical design of the DTL coupler and the calculations of RF coupling between the cavity and coupler are carried out. The results from the numerical simulations are in excellent agreement with the analytical results.     

RF power coupling for the CSNS DTL

The China Spallation Neutron Source(CSNS)drift tube linac(DTL)consists of four tanks and each tank is fed by a 2.5 MW klystron.Accurate predication of RF coupling between the RF cavity and ports is very important for DTL RF coupler design.An iris-type coupler is chosen to couple the RF power to the DTL accelerating cavity.The physical design of the DTL coupler and the calculations of RF coupling between the cavity and coupler are carried out.The results from the numerical simulations are in excellent agreement with the analytical results.     

Variations in bonding of iron in porous ferrisilicates

The ISAC post accelerator comprises an RFQ, DTL and SC-linac. The high energy beam lines connect the linear accelerators as well as deliver the accelerated beams to two different experimental areas. The medium energy beam transport (MEBT) line connects the RFQ to the DTL. The high energy beam transport (HEBT) line connects the DTL to the ISAC-I experimental stations (DRAGON, TUDA-I, GPS). The DTL to superconducting beam (DSB) transport line connects the ISAC-I and ISAC-II linacs. The superconducting energy beam transport (SEBT) line connects the SC linac to the ISAC-II experimental station (TUDA-II, HERACLES, TIGRESS, EMMA and GPS). All these lines have the function of transporting and matching the beams to the downstream sections by manipulating the transverse and longitudinal phase space. They also contain diagnostic devices to measure the beam properties.