2,4,6-三氯酚纯品原料纯度定值方法研究

对用于溶液标准物质制备的纯品原料2,4,6-三氯酚纯度定值方法进行了探讨。采用气相色谱质谱法(GC–MS)对主成分和杂质进行定性鉴定。用高效液相色谱法(HPLC–DAD)、气相色谱法(GC–FID)和差示扫描量热法(DSC)3种不同原理的方法对主成分定值。卡尔费休法测量水分,电感耦合等离子体质谱(ICP–MS)测量无机杂质。2,4,6-三氯酚纯度定值结果为99.3%,扩展不确定度为0.6%(k=2)。     

2019年第6期部分拟采用稿

<正>标准物质婴幼儿配方奶粉标准物质中黄曲霉毒素M1定值方法研究尿沉渣白细胞标准物质研制分析测试Qu ECh ERS–气相色谱法测定地表水中的氯丹和硫丹微波消解–电感耦合等离子体质谱法同时测定垃圾渗滤液中8种重金属元素顶空–气相色谱法测定水中的7种苯系物不同底气中微量CO,CO_2和CH_4的定量分析     

同时裂解甲基化气相色谱法鉴别合成胶粘剂

 应用同时裂解甲基化气相色谱法 (Py Me GC)对合成胶粘剂进行了鉴别。采用热丝型裂解器、氢火焰离子化气相色谱仪、FFAP毛细管柱、程序升温方式及季铵盐甲基化试剂 ,对刑事案件中常见的丙烯酸酯类及其改性体、醋酸乙烯酯、聚乙烯醇等合成胶粘剂进行了测定 ,并对样品裂解各主要组分峰进行了GC/MS定性分析 ,同时比较了相同样本用常规裂解气相色谱法 (Py GC)测定的结果。结果表明 :Py Me GC法比Py GC法可获得更多的物质组分信息 ,是一种适用于法庭科学鉴定的方法。     

硫化学发光气相色谱法在气体分析中应用研究

本文建立了硫化学发光气相色谱仪测定气体中痕量硫化物的分析方法。通过对不同材质管线的考察,优化了该方法的进样系统。对氮中12组分含硫化合物气体标准物质在硫化学发光检测器上响应开展了研究,验证了硫化学发光检测器等摩尔响应的特性,计算得出各含硫化合物的响应因子,建立硫化学发光气相色谱法的校正因子,并对其机理进行了简单探讨。实验研究了硫化学发光气相色谱法的线性及检出限,结果表明该方法线性良好,方法检出限低至0.03μmol·mol~(-1)。该方法相比于其他测定硫化物方法,具有检出限更低,线性范围更宽,等摩尔响应等特性。     

HP–FFAP毛细管柱气相色谱法测定空气中溶剂汽油

建立了毛细管柱气相色谱法测定空气中溶剂汽油的新方法。空气样品经采气袋采集,色谱柱为HP–FFAP毛细管柱,以氮气为载气,采用直接进样–气相色谱法测定空气中的溶剂汽油。在实验条件下,测定空气中溶剂汽油(以正己烷计),方法线性范围为0.015~1.0μg/m L,线性相关系数大于0.999,检出限为5×10–3μg/m L,测定结果的相对标准偏差为5.5%(n=15),气体标准物质测定结果的相对误差低于10%。该方法准确度较高,操作简便,可用于空气中溶剂汽油的测定。     

GC–MS校准用异辛烷中八氟萘标准溶液的研制

采用重量–容量法研制了气相色谱–质谱(GC–MS)校准用100.1 pg/μL异辛烷中八氟萘溶液标准物质,分别用F检验和回归曲线法对研制的溶液标准物质进行了均匀性和稳定性检验,对定值结果的不确定度进行了评定。结果表明,研制的异辛烷中八氟萘溶液标准物质具有良好的均匀性和稳定性,定值结果的相对扩展不确定度为3%(k=2)。该标准物质可用于GC–MS联用仪的EI源及负CI源的信噪比校准。     

标准物质基体对马拉硫磷气相色谱响应的影响

对马拉硫磷在甲醇、丙酮、乙酸乙酯、二氯甲烷4种溶剂中的气相色谱峰单位浓度面积响应进行了研究,用t检验法判定响应差异性.研究结果证明,浓度相同但溶剂不同的马拉硫磷溶液,在其它实验条件均相同的情况下,气相色谱峰单位浓度面积响应有显著性差异;用前处理后待测样浓缩液的基体稀释对照样,可以减小或消除马拉硫磷标准物质基体与方法中要求的标准储备液基体的差异性所带来的对待测样检测结果的影响.     

水中氯离子溶液标准物质的研制

以氯化钠纯度标准物质为原料,超纯水为溶剂,采用重量–容量法制备了水中氯离子溶液标准物质,系统阐述了水中氯离子溶液标准物质的研制方法.采用离子色谱法对制备的水中氯离子溶液标准物质进行分析,通过F–检验和回归曲线法对色谱数据进行计算,方差分析和线性拟合结果表明该溶液标准物质具有良好的均匀性和稳定性.研制的水中氯离子溶液标准...     

基质效应对有机磷农药测定的影响及其解决方法

该文以液液萃取-气相色谱法探讨了基质对乐果、甲基对硫磷、马拉硫磷和对硫磷4种有机磷测定的影响以及解决方法.研究表明,气相色谱法测定有机磷农药的过程中基质效应显著存在,其基质增强比例为1.01 ～3.46.基质效应由基质种类及含量、有机磷农药种类及浓度等因素决定,同时与萃取溶剂、测定条件(如衬管、进样口温度等)有关.不同萃取溶剂对有机磷农药的萃取效率不同,但均存在基质增强效应;当进样口温度为260 ℃时,可最大程度降低基质在衬管中的残留,且不造成有机磷农药的分解;衬管则应首选带玻璃棉的.实际样品/标准样品的交替进样方式可以降低基质效应强度,但难以达到回收率要求,而校正因子校正法及分析保护剂法则是降低或消除基质效应的可行办法.     

无自身标准样品GC-FID法测定标准物质中有机杂质含量

建立了一种标准物质中有机杂质的无自身标准样品准确定值的GC–FID方法。以与待测有机杂质结构相似的物质作为参考物质校准GC–FID响应信号,采用有效碳数法计算待测杂质的质量响应值Si,检测出样品中该有机杂质的准确含量。以癸二酸二正丁酯纯度标准物质为例,用该法对其中有机杂质总量进行定值,定值结果为0.29%,U=0.07%(k=2)。定值不确定度主要来源于Si和检测重复性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.