普鲁士蓝@石墨烯-壳聚糖纳米复合物用于构建microRNA电化学传感器的研究

制备了基于普鲁士蓝(PB)、石墨烯(GN)、壳聚糖(Chi)的纳米复合物(PB@GN-Chi),并将其修饰在玻碳电极表面制得microRNA电化学传感器。实验发现,GN可有效提高敏感膜的导电性能和比表面积,增强PB在电极表面的稳定性和传感器的重现性。通过戊二醛的交联作用,将氨基化的捕获探针(ssDNA)固载在PB@GN-Chi修饰的电极表面,并用于miR-21的检测。以透射电子显微镜对纳米复合物的形态进行表征,采用循环伏安法、示差脉冲伏安法对传感器的电化学特性进行研究。实验结果表明,该传感器具有良好的稳定性和重现性,在2.8~2.8×10~4pmol/L浓度范围内,响应电流与miR-21浓度的对数呈线性关系,检出限为0.87 pmol/L,可用于miR-21的检测。     

基于金-铂纳米颗粒修饰的碳纳米管构建免标记电化学免疫传感器用于CEA检测

本文将金-铂双金属纳米颗粒(Au-PtNPs)沉积在羧基化的单壁碳纳米管表面作为基底材料,用以固载癌胚抗原抗体(anti-CEA)。利用anti-CEA与癌胚抗原(CEA)间的特异性识别作用将CEA固载于电极表面,用于降低Au-PtNPs对底物对苯二酚的催化作用,以改变电化学响应信号。通过对比CEA作用前后的电化学信号变化强弱可实现CEA的定量检测。研究发现,在最优实验条件下,CEA的浓度与电化学响应信号呈良好的线性关系。在0.05～80ng·mL~(-1)范围内其检测限为5 pg·mL~(-1)。该免疫传感器不仅展现出良好的选择性、重现性和稳定性,同时能成功用于人体血清样本的分析检测,其结果与酶联免疫方法(ELISA)检测结果相吻合。     

碳纳米管/纳米金复合膜电化学免疫传感器用于微囊藻毒素的检测研究

在玻碳电极表面修饰碳纳米管,并用多电位阶跃法在碳纳米管表面沉积纳米金制得碳纳米管/纳米金复合膜。通过纳米金和微囊藻毒素-(亮氨酸-精氨酸)抗体之间的吸附作用,将抗微囊藻单克隆抗体固定于电极表面,以牛血清白蛋白封闭非特异性吸附位点,研制了检测微囊藻毒素的电化学免疫传感器。利用微囊藻毒素与其抗体之间的特异性识别作用构建"三明治"夹心结构的免疫分析模式,以辣根过氧化物酶标记抗体为二抗,利用微分脉冲伏安法实现了对微囊藻毒素的检测。在优化条件下,此传感器的响应电流与微囊藻毒素浓度在0.50~12.0μg/L范围内呈良好的线性关系,检出限为0.30μg/L(S/N=3)。对实际水样进行了微囊藻毒素的加标回收实验,回收率在93.0%~108.5%之间,相对标准偏差为3.8%~5.0%。     

基于壳聚糖-纳米金/纳米普鲁士蓝/L-半胱氨酸修饰的 葡萄糖传感器的研究

在金电极表面修饰一层L-半胱氨酸,再利用静电吸附作用固定纳米普鲁士蓝(nano-PB),然后利用壳聚糖-纳米金复合膜将葡萄糖氧化酶(GOD)固定于修饰电极表面,制成新型的葡萄糖传感器.通过交流阻抗技术,循环伏安法和计时电流法考察了电极的电化学特性.在优化的实验条件下,该传感器在葡萄糖浓度为3.0×10-6～1.0×10-3 mol/L范围内有线性响应,检测下限为1.6×10-6 mol/L.此外该传感器具有响应快、稳定性好和选择性良好的特点,能有效排除常见干扰物质如抗坏血酸、尿酸等对测定的影响.     

基于纳米金与碳纳米管-纳米铂-壳聚糖纳米复合物固定癌胚抗原免疫传感器的研究

采用纳米金(nano-Au)、多壁碳纳米管-纳米铂-壳聚糖的纳米复合物(MWNT-Pt-CS)及电子媒介体硫堇(Th)固载抗体制得高灵敏癌胚抗原免疫传感器．首先, 于壳聚糖溶液中用NaBH4还原H2PtCl6, 并将多壁碳纳米管分散于其中制得碳纳米管-纳米铂-壳聚糖纳米复合物, 并将其滴涂在玻碳电极上成膜; 然后, 吸附电子媒介体硫堇制得硫堇/碳纳米管-纳米铂-壳聚糖(Th/MWNT-Pt-CS)修饰电极．利用壳聚糖和硫堇分子中大量的氨基固定纳米金并吸附癌胚抗体(anti-CEA); 最后, 用辣根过氧化物酶(HRP)封闭活性位点从而制得高灵敏电流型免疫传感器．在优化的实验条件下, 该传感器响应的峰电流值与癌胚抗原(carcinoembryonic antigen)浓度在0.5～10和10～120 ng/mL的范围内保持良好的线性关系, 检测限为0.2 ng/mL．     

纳米金、碳纳米管和纳米线及其在电化学生物传感器研究中的应用

综述了1995～2007年间,纳米金、碳纳米管和纳米线材料及其在电化学生物传感器研究中的新进展,引用文献60篇.     

基于聚苯胺-普鲁士蓝/普鲁士蓝复合膜的过氧化氢电化学传感器的制备及表征

利用聚苯胺和普鲁士蓝的协同作用,构建了聚苯胺-普鲁士蓝/普鲁士蓝复合膜的H2O2电化学传感器.聚苯胺的带正电骨架和带负电的普鲁士蓝粒子相互吸引,且聚苯胺提供了很多氧化还原位点,有利于普鲁士蓝粒子的进一步均匀生长,使制备的传感器具备优异的电催化性能.采用扫描电镜和电化学方法对修饰电极进行了表征.在最佳实验条件下,该修饰电...     

基于聚硫堇/亚甲基蓝和纳米金放大的免疫传感器检测贝类毒素大田软海绵酸

采用聚硫堇(PTH)修饰电极为传感界面提供一个生物修饰功能基质膜,借助纳米金(GNPs)的导电性、生物相容性与高比表面积特性实现抗体的有效固定,并以亚甲基蓝(MB)为电子媒介加速电极表面电化学反应的电子传递,构建了一种高灵敏的非标记电化学免疫传感器,用于贝类毒素大田软海绵酸(OA)的检测。当分子结构中含有羧基和酚基的OA与其抗体特异性结合后,生成以阴离子形式存在的抗原-抗体复合物,阻碍了传感器表面电子的传递,导致峰电流下降。利用免疫反应前后峰电流的变化,可对OA进行特异性识别和准确定量。在优化实验条件下,OA浓度的对数在0.2~100 μg/L范围内与其峰电流的变化值(ΔI)呈线性相关,线性方程为ΔI=1.721 7+1.083 6lgρ,相关系数为0.992 0,检出限为0.1 μg/L。该免疫传感器重现性好、特异性强,用于实际贝类样品的测定,回收率为85.3%~112%。     

基于树枝状分子及功能化金纳米粒子的电化学免疫传感器检测污泥中大肠杆菌

利用树枝状分子-金纳米粒子复合物修饰电极和金纳米粒子标记物构建电化学免疫传感器,用于污泥中大肠杆菌的检测.首先在玻碳电极表面电聚合对氨基苯甲酸,通过共价作用结合第Ⅳ代氨基末端的树枝状分子(G4-PAMAM),并在其内部载入金纳米粒子,制备修饰电极(GCE/p-ABA/PAMAM (AuNPs)),用于固定大肠杆菌.采用硫堇作为电活性物质包被金纳米粒子,用于标记二抗制备金纳米粒子标记物(Ab2-Au-Th).通过抗原-抗体之间的特异性识别作用,将一抗、金纳米粒子标记物依次修饰在电极表面,用差分脉冲伏安法测定硫堇产生的电流信号,实现对大肠杆菌的检测.在优化的实验条件下,响应电流与大肠杆菌浓度的对数在1.0×102～1.0×106 cfu/mL范围内呈线性关系,检出限为70 cfu/mL(S/N=3).利用本方法检测污水处理厂的不同污泥样品中的大肠杆菌,回收率为89.4％～ 105.8％.     

A Reagentless Amperometric Immunosensor for Alpha‐Fetoprotein Based on Gold Nanoparticles/TiO2 Colloids/Prussian Blue Modified Platinum Electrode

A novel reagentless amperometric immunosensor for the determination of alpha‐fetoprotein (AFP) was prepared by immobilizing TiO₂ colloids on Prussian blue (PB) modified platinum electrode, which yielded a positively charged interface with strong adsorption to deposit gold nanoparticles for immobilization of alpha‐fetoprotein antibody (anti‐AFP). The factors influencing the performance of the proposed immunosensors were studied in detail. Under the optimized conditions, cyclic voltammograms determination of AFP showed a specific response in two concentration ranges from 3.0 to 30.0 ng/mL and from 30.0 to 300.0 ng/mL with a detection limit of 1.0 ng/mL at a signal‐to‐noise ratio of 3. The proposed immunosensor exhibited high selectivity, good reproducibility, long‐term stability (>2 months) and good repeatability.     

基于聚吡咯修饰膨胀石墨电极的甲胎蛋白电化学免疫传感器

构建了测定人血清中甲胎蛋白(AFP)的电化学免疫传感器。此免疫传感器的制备采用恒电位法在膨胀石墨(EG)电极表面合成聚吡咯(PPy),再以戊二醛(GA)作为交联剂,固定辣根过氧化酶标记的AFP抗体(HRP-anti-AFP)。此免疫传感器在含AFP的溶液中于35℃温育50 min后,再在传感器表面修饰普鲁士蓝(PB)作为电子介体,抗原抗体免疫结合产生的免疫复合物会导致HRP对PB催化氧化的效率降低。在优化条件下,AFP的浓度在0.01～300μg/L范围内呈线性关系,检出限为6.25 pg/mL(S/N=3)。这种基于PPy修饰EG电极的免疫传感器制备简单,灵敏度高且价格低廉,有望成为一次性电化学免疫传感器。     

石墨烯-壳聚糖复合物修饰电极构建电化学免疫传感器对1-芘丁酸的检测研究

采用石墨烯(GS)和壳聚糖(CS)复合膜修饰玻碳电极(GS-CS/GCE),利用1-乙基-(3-二甲基氨基丙基)碳二亚胺盐酸盐(EDC)和N-羟基丁二酰亚胺(NHS)(4∶1)活化GS-CS/GCE,共价固定多环芳烃抗体(anti-PAHs),构建灵敏度高、稳定性好的非标记电流型免疫传感器,用于1-芘丁酸(PBA)的检测。运用扫描电子显微镜对GS-CS复合膜的形貌进行表征。在pH 7.0含10 mmol/L K3Fe(CN)6和0.1 mmol/L KCl的磷酸盐溶液中,通过循环伏安法和示差脉冲伏安法研究修饰电极表面的电化学性质,并考察了免疫传感器的电化学性能。研究表明,由于石墨烯和壳聚糖的协同作用,GS-CS修饰的玻碳电极在Fe(CN)64-/3-溶液中的峰电流明显增大,有利于提高免疫传感器的灵敏度。在优化实验条件下,电极表面的anti-PAHs抗体固定量显著提高,增强了电极的分子识别性能。由于anti-PAHs抗体-抗原结合物的导电性较差,免疫传感器的峰电流随着待测溶液中PBA浓度的增大而减小,PBA浓度在0.1～80μg/L范围内呈良好的线性关系,检出限为0.03μg/L。该免疫传感器重现性好、特异性强,用于实际样品的测定,回收率为90%～105%。     

Probe-Integrated Label-Free Electrochemical Immunosensor Based on Binary Nanocarbon Composites for Detection of CA19-9

Convenient and sensitive detection of tumor biomarkers is crucial for the early diagnosis and treatment of cancer. Herein, we present a probe-integrated and label-free electrochemical immunosensor based on binary nanocarbon composites and surface-immobilized methylene blue (MB) redox probes for detection of carbohydrate antigen 199 (CA19-9), which is closely associated with gastric malignancies. Nanocarbon composites consisting of electrochemically reduced graphene oxides and carbon nanotubes (ErGO-CNT) are electrodeposited onto an indium tin oxide (ITO) electrode surface to form a 3D nanocomposite film, which could provide high surface area to immobilize abundant MB probes, facilitate the electron transfer of MB, and therefore, improve sensitivity. Polydopamine (PDA) served as a bifunctional linker is able to immobilize anti-CA19-9 antibodies and stabilize the inner probe, conferring the sensing interface with specific recognition capacity. Electrochemical detection of CA19-9 is achieved based on the decrease of the redox signal of MB after specific binding of CA19-9 with a wide linear range of 0.1 mU/mL to 100 U/mL and a limit of detection (LOD) of 0.54 nU/mL (S/N = 3). The constructed electrochemical immunosensor has good selectivity, repeatability, reproducibility, and stability. Furthermore, determination of CA19-9 in human serum samples is also realized.     

New Nanocomposite Based on Prussian Blue Nanoparticles/Carbon Nanotubes/Chitosan and Its Application for Assembling of Amperometric Glucose Biosensor

Abstract

A new nanocomposite was developed by combination of prussian blue (PB) nanoparticles and multiwalled carbon nanotubes (MWNTs) in the matrix of biopolymer chitosan (CHIT). The PB and MWNTs had a synergistic electrocatalytic effect toward the reduction of hydrogen peroxide. The CHIT/MWNTs/PB nanocomposite‐modified glassy carbon (GC) electrode could amplify the reduction current of hydrogen peroxide by ～35 times compared with that of CHIT/MWNTs/GC electrode and reduce the response time from ～60 s for CHIT/PB/GC to 3 s. Besides, the CHIT/MWNTs/PB nanocomposite‐modified GC electrode could reduce hydrogen peroxide at a much lower applied potential and inhibit the responses of interferents such as ascorbic acid (AA) uric acid (UA) and acetaminophen (AC). With glucose oxidase (GOx) as an enzyme model, a new glucose biosensor was fabricated. The biosensor exhibited excellent sensitivity (the detection limit is down to 2.5 µM), fast response time (less than 5 s), wide linear range (from 4 µM to 2 mM), and good selection.     

Highly Sensitive Electrochemical Immunosensor Based on Mesoporous PdPt Nanoparticles Anchored on a Three-dimensional PANI@CNTs Network as Nanozyme Labels

In this study, a novel strategy to amplify electrochemical signals by mesoporous PdPt nanoparticles with core-shell structures anchored on a three-dimensional PANI@CNTs network as nanozyme labels (PdPt/PANI@CNTs) was proposed for the sensitive monitoring of α-fetoprotein (AFP, Ag). First, the mesoporous PdPt nanoparticles prepared by a facile chemical reduction method had excellent biocompatibility with biomolecules, which could capture a large amount of AFP-Ab₂ (Ab₂) and exhibit plentiful pores to entrap more thionine (Thi) into mesoporous PdPt nanoparticles with enhanced loading and abundant active sites. Furthermore, the resulting mesoporous PdPt nanoparticles were abundantly dotted on the surface of a three-dimensional PANI@CNTs network with excellent conductivity and a high specific surface area through the bonding of the amino group to form PdPt/PANI@CNTs nanozyme labels. Most importantly, the as-prepared PdPt/PANI@CNTs nanozyme labels exhibited unexpected enzyme-like activity towards the reduction of hydrogen peroxide owing to the highly indexed facets, enhancing the current response to realize signal amplification. In view of the advantages of nanozyme labels and the involvement of gold nanoparticles (AuNPs, which behave as electrode materials) for the sensitive determination of AFP, the as-developed immunosensor could obtain a dynamic working range of 0.001 ng mL^−1–100.0 ng mL⁻¹ at a detection limit of 0.33 pg mL⁻¹ via DPV (at 3σ). Furthermore, the nanozyme-based electrochemical immunosensor exhibited remarkable analytical performance, which brought about feasible ideas for disease diagnosis in the future.     

Electrochemical Immunosensor for α‐Fetoprotein Based on Gold Nanoparticles/Graphene‐Prussian Blue

The electrochemical immunosensor for α‐fetoprotein (AFP) was fabricated based on the platform of gold nanoparticles (GNP)/graphene (Gr)‐prussian blue (PB). By electrodeposition, GNP were modified on the surface of the prepared Gr‐PB. The anti‐AFP‐1,1′‐ferrocenedicarboxylic acid (FcDA) as label was directly immobilized on the platform of GNP/Gr‐PB. And after the immunoreactions, the formed complex inhibited the electron transfer and decreased the catalytic current of FcDA toward the reduction of H₂O₂. And in the range of 10–3200 pg·mL^?1, the decreased current is linear with the concentration of AFP, with a detection limit of 3 pg·mL^?1. The developed immunoassay method showed good precision, high sensitivity, acceptable stability and reproducibility, and could be used for the detection of real samples with consistent results in comparison with those obtained by the enzyme linked immunosorbent assay (ELISA) method.