Correlation of the Solubilizing Abilities of 1-Butyl-1-methyl-pyrrolidinium Tris(pentafluoroethyl)trifluorophosphate, 1-Butyl-1-methylpyrrolidinium Triflate and 1-Methoxyethyl-1-methylmorpholinium Tris(pentafluoroethyl)trifluorophosphate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrolidinium tris(pentafluoroethyl)trifluorophosphate ([BMPyrr]⁺[FAP]^?), 1-butyl-1-methylpyrrolidinium triflate, ([BMPyrr]⁺[Trif]^?), and 1-methoxyethyl-1-methylmorpholinium tris(pentafluoroethyl)trifluorophosphate, ([MeoeMMorp]⁺[FAP]^?), stationary phases at (323, 353 and 383) K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) and water-to-anhydrous IL partition coefficients. The three sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL (log₁₀ K) and water-to-IL (log₁₀ P) partition coefficient data to within average standard deviations of about 0.11 and 0.15 log₁₀ units, respectively.     

Determination of the solubilising character of 2-methoxyethyl-(dimethyl)ethylammonium tris(pentafluoroethyl)trifluorophosphate based on the Abraham solvation parameter model

Gas–liquid chromatographic retention factors have been measured for 42 different organic probes on a 2-methoxyethyl(dimethyl)ethylammonium tris(pentafluoroethyl)trifluorophosphate, ([MeoeM₂EAm]⁺[FAP]^–), stationary phase capillary column at 323 and 353 K. The measured retention factors were combined with published gas-to-liquid partition coefficient data for solutes dissolved in ([MeoeM₂EAm]⁺[FAP]^–) and with published gas-to-water partition coefficient data to yield 107 gas-to-anhydrous ionic liquid and 105 water-to-anhydrous ionic liquid partition coefficients. Abraham model correlations for describing solute transfer into ([MeoeM₂EAm]⁺[FAP]^–) were derived from the three sets of experimental partition coefficient data. The derived correlations back-calculated the experimental gas-to-([MeoeM₂EAm]⁺[FAP]^–) and water-to-([MeoeM₂EAm]⁺[FAP]^–) partition coefficient data to within 0.13 and 0.15 log units, respectively.     

Correlation of the Solubilizing Abilities of 1-Butyl-1-methylpiperidinium Bis(trifluoromethylsulfonyl)imide and 1-Butyl-1-methylpyrrolidinium Tetracyanoborate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrrolidinium tetracyanoborate ([BMPyrr]⁺[B(CN)₄]^?) and 1-butyl-1-methyl-piperidinium bis(trifluoromethylsulfonyl)imide ([BMPip]⁺[Tf₂N]^?) stationary phases at 323 K and 353 K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) and water-to-anhydrous IL partition coefficients. Both sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL (log₁₀ K) and water-to-IL (log₁₀ P) partition coefficient data to within average standard deviations of about 0.10 and 0.15 log₁₀ units, respectively.     

Correlation of the Solubilizing Abilities of Hexyl(trimethyl)ammonium <Emphasis Type="Italic">bis</Emphasis>((Trifluoromethyl)sulfonyl)imide, 1-Propyl-1-methylpiperidinium <Emphasis Type="Italic">bis</Emphasis>((Trifluoromethyl)sulfonyl)imide,and 1-Butyl-1-methyl-pyrrolidinium Thiocyanate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrrolidinium thiocyanate ([BMPyrr]⁺[SCN]⁻), hexyl(trimethyl)ammonium bis((trifluoromethyl)sulfonyl)imide ([HexM₃Am]⁺[(Tf)₂N]⁻), and 1-propyl-1-methylpiperidinium bis((trifluoromethyl)sulfonyl)imide ([PMPip]⁺[(Tf)₂N]⁻) stationary phases at 323 and 353 K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) partition coefficients and water-to-anhydrous IL partition coefficients. Both sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL and water-to-IL partition coefficient data to within average standard deviations of 0.116 and 0.156 log₁₀ units, respectively.     

Ion-specific equation coefficient version of the Abraham model for ionic liquid solvents: determination of coefficients for tributylethylphosphonium, 1-butyl-1-methylmorpholinium, 1-allyl-3-methylimidazolium and octyltriethylammonium cations

Gas-to-ionic liquid partition coefficient data have been assembled from the published chemical literature for solutes dissolved in 1-allyl-3-methylimidazolium dicyanamide, 1-allyl-3-methylimidazolium bis(trifluoromethylsulphonyl)imide, octyltriethylammonium bis(trifluomethyl-sulphonyl)imide, tributylethylphosphonium diethylphosphate and 1-butyl-1-methylmorpholinium tricyanomethanide. The published experimental data were converted to water-to-ionic liquid partition coefficients using standard thermodynamic relationships. Both sets of partition coefficients were correlated with the Abraham solvation parameter model. The derived Abraham model correlations described the observed partition coefficient data to within 0.13 log units. Cation-specific equation coefficients were calculated for each of the cations present in the five ionic liquid solvents studied. The calculated cation-specific equation coefficients can be combined with previously reported ion-specific equation coefficients for 19 different anions to yield Abraham model correlations for predicting the partitioning the behaviour of solutes in 76 different anhydrous ionic liquid solvents.     

Using the solvation parameter model to characterize functionalized ionic liquids containing the tris(pentafluoroethyl)trifluorophosphate (FAP) anion

Ionic liquids (ILs) containing the tris(pentafluoroethyl)trifluorophosphate anion [FAP]⁻ have attracted increased attention due to their unique properties including ultrahigh hydrophobicity, hydrolytic stability, and wide electrochemical window. In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. The role of the functional groups, nature of the counter anion, and cation type on the system constants were evaluated. ILs containing [FAP]⁻ possessed lower hydrogen bond basicity than NTf₂-based ILs having the same cationic component; in the case of hydroxyl-functionalized cations, the presence of [FAP]⁻ led to an enhancement of the hydrogen bond acidity, relative to the NTf₂-analogs. The system constants support the argument that [FAP]⁻ weakly coordinates the cation and any appended functional groups, promoting properties of the cation which might be masked by stronger interactions with other anion systems. The chromatographic performance of the IL stationary phases was evaluated by examining the retention behavior and separation selectivity for chosen analytes. The results from this work can be used as a guide for choosing FAP-based ILs capable of exhibiting desired solvation properties while retaining important physical properties including high thermal stability and high hydrophobicity. Figure In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with tris(pentafluoroethyl)trifluorophosphate [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Linear free energy relationship (LFER) correlations for the solubilising characterisation of room temperature ionic liquids containing triethylsulphonium and 1-butyl-1-methylpyrrolidinium cations

Gas-to-room temperature ionic liquid (RTIL) partition coefficients have been compiled from the published literature for solutes dissolved in triethylsulphonium bis(trifluoromethylsulphonyl)imide, {[E₃S]⁺[(Tf)₂N]^?}, and in 1-butyl-1-methylpyrrolidinium trifluoromethanesulphonate, {[BMPyr]⁺[Trif]^?}. These partition coefficients were converted into water-to-RTIL partition coefficients using the corresponding gas-to-water partition coefficients. Both sets of partition coefficients were analysed using the Abraham model with cation-specific and anion-specific equation coefficients. Equation coefficients are reported for the triethylsulphonium and 1-butyl-1-methylpyrrolidinium cations. The calculated cation coefficients can be combined with our previously determined eight sets of anion-specific equation coefficients to yield expressions capable of predicting the partition coefficients of solutes in 16 different RTILs.     

Solubility of H2S in 1-(2-hydroxyethyl)-3-methylimidazolium ionic liquids with different anions

The solubility of hydrogen sulfide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([HOemim]⁺)-based ionic liquids (ILs) containing different anions, viz. hexafluorophosphate ([PF₆]⁻), trifluoromethanesulfonate ([OTf]⁻), and bis-(trifluoromethyl)sulfonylimide ([Tf₂N]⁻) at temperatures ranging from 303.15 to 353.15 K and pressures of up to about 1.8 MPa was measured by a volumetric based static apparatus. The solubility data were correlated using two models: (1) the Krichevsky–Kasarnovsky equation and (2) the extended Henry's law combined with the Pitzer's virial expansion for the excess Gibbs energy. Henry's law constants (at zero pressure) in mole-fraction and molality scales were obtained at different temperatures by means of these two models. Using the solubility data, the partial molar thermodynamic functions of solution, i.e. Gibbs energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of H₂S is greater than that of CO₂ in the corresponding ILs studied in this work and that the solubility of both gases increases as the number of trifluoromethyl (–CF₃) groups in the anion increases, i.e. the solubility behavior of both gases follows the order [HOemim][Tf₂N] ≥ [HOemim][OTf] > [HOemim][PF₆] > [HOemim][BF₄].     

Void‐Assisted Ion‐Paired Proton Transfer at Water–Ionic Liquid Interfaces

At the water–trihexyl(tetradecyl)phosphonium tris(pentafluoroethyl)trifluorophosphate ([P_14,6,6,6][FAP]) ionic liquid interface, the unusual electrochemical transfer behavior of protons (H⁺) and deuterium ions (D⁺) was identified. Alkali metal cations (such as Li⁺, Na⁺, K⁺) did not undergo this transfer. H⁺/D⁺ transfers were assisted by the hydrophobic counter anion of the ionic liquid, [FAP]^?, resulting in the formation of a mixed capacitive layer from the filling of the latent voids within the anisotropic ionic liquid structure. This phenomenon could impact areas such as proton‐coupled electron transfers, fuel cells, and hydrogen storage where ionic liquids are used as aprotic solvents.     

Solubility of CO2 in 1-(2-hydroxyethyl)-3-methylimidazolium ionic liquids with different anions

The solubility of carbon dioxide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([hemim]⁺) based ionic liquids (ILs) with different anions, viz. hexafluorophosphate ([PF₆]^?), trifluoromethanesulfonate ([OTf]^?), and bis-(trifluoromethyl)sulfonylimide ([Tf₂N]^?) at temperatures ranging from 303.15 K to 353.15 K and pressures up to 1.3 MPa were determined. The solubility data were correlated using the Krichevsky–Kasarnovsky equation and Henry’s law constants were obtained at different temperatures. Using the solubility data, the partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of CO₂ in the ILs studied follows the same behaviour as the corresponding conventional 1-ethyl-3-methylimidazolium ([emim]⁺) based ILs with the same anions, i.e. [hemim][NTf₂] > [hemim][OTf] > [hemim][PF₆] > [hemim][BF₄].     

Linear free energy relationship correlations for the solubilising characterisation of room temperature ionic liquids containing 1-hexyloxymethyl-3-methylimidazolium and 1,3-dihexyloxymethylimidazolium cations

Gas-to-room temperature ionic liquid (RTIL) partition coefficients have been compiled from the published literature for solutes dissolved in 1-hexyloxymethyl-3-methylimidazolium bis(trifluoromethylsulphonyl)imide, {[HxomMIm]⁺[(Tf)₂N]^?}, and in 1,3-dihexyloxymethylimidazolium bis(trifluoromethylsulphonyl)imide, {[(Hxom)₂Im]⁺[(Tf)₂N]^?}. These partition coefficients are converted into water-to-RTIL partition coefficients using the corresponding gas-to-water partition coefficients. Both sets of partition coefficients are analysed using the Abraham model with cation-specific and anion-specific equation coefficients. The equation coefficients are reported for the 1-hexyloxymethyl-3-methylimidazolium and 1,3-dihexyloxymethylimidazolium cations. The calculated cation coefficients can be combined with our previously determined nine sets of anion-specific equation coefficients to yield expressions capable of predicting the partition coefficients of solutes in 18 different RTILs.     

Structural ordering transitions in ionic liquids mixtures

Differential capacitance curves for the electrical double layer (EDL) of mixtures of imidazolium-based ionic liquids (ILs) with a common cation (1-ethyl-3-methylimidazolium, [C₂MIM]⁺) and two different anions (bis(trifuoromethylsulfonyl)imide, [Tf₂N]⁻) and tris(pentafluoroethyl)trifluorophosphate [FAP]⁻) were obtained. Sharp peaks in the differential capacitance curves were observed for a small range of mixtures compositions at positive charge densities. The appearance and position on the potential scale of the peaks were found to be dependent on the mixture composition and temperature. The occurrence of these phenomena is interpreted as corresponding to an abrupt change in the EDL structure arrangement as a result of a complex interplay of electrostatic interactions and steric effects. The use of the non-structured mercury electrode allowed to decouple the eventual potential induced restructuring occurring at the double layer from the well-known surface reconstruction effects often reported for ionic liquids in contact with single crystal face electrodes.     

Vapor-liquid equilibria at 333.15 K and excess molar volumes and deviations in molar refractivity at 298.15 K for mixtures of diisopropyl ether, ethanol and ionic liquids

In this work, we have studied influence of ionic liquids (ILs) on the azeotrope composition for the system {diisopropyl ether (DIPE) + ethanol} using trihexyltetradecylphosphonium chloride ([P_666,14][Cl]) and trihexyltetradecylphosphonium bis(2,2,4-trimethylpentyl) phosphinate ([P_666,14][TMPP]). Isothermal vapor-liquid equilibrium data at 333.15 K are reported for the ternary systems {DIPE + ethanol + [P_666,14][Cl]} and {DIPE + ethanol + [P_666,14][TMPP]} with varying the mole fraction of ILs from 0.05 to 0.10. The experimental ternary VLE data were correlated using the Wilson equation. In addition, excess molar volumes (V^E) and deviations in molar refractivity (ΔR) data at 298.15 K are reported for the binary systems {DIPE + [P_666,14][Cl]} and {ethanol + [P_666,14][Cl]} by a digital vibrating tube densimeter and a precision digital refractometer. The V^E and ΔR were correlated by the Redlich-Kister equation.     

The decomposition kinetics of [Et4N]2[M(dmit)2] (M = Ni, Pd) in a nitrogen atmosphere using thermogravimetry

Thermal properties and thermal decompositions of [NEt₄]₂[M(dmit)₂] (M = Ni(II), Pd(II), dmit = 1,3-dithiole-2-thione-4,5-dithiolate) have been studied by thermogravimetry (TG). The TG analysis has shown that the complexes are thermally stable up to 460 K and the decomposition of the complexes occurs in three consecutive stages up to 873 K. A thermal stability scale for [M(dmit)₂]ⁿ⁻ anions was based on the thermal properties. Kinetics parameters, such as activation energy, E_a, and kinetic apparent pre-exponential factor, ln A_app, have been calculated from the thermogravimetric data at heating rates of 10, 15, 20 and 25 K/min involving differential (Friedman's equation) and integral (Flynn-Wall-Ozawa's equation) methods.     

Ionic liquid-based ultrasound-assisted dispersive liquid–liquid microextraction followed high-performance liquid chromatography for the determination of ultraviolet filters in environmental water samples

In the present study, a rapid, highly efficient and environmentally friendly sample preparation method named ionic liquid-based ultrasound-assisted dispersive liquid–liquid microextraction (IL-USA-DLLME), followed by high performance liquid chromatography (HPLC) has been developed for the extraction and preconcentration of four benzophenone-type ultraviolet (UV) filters (viz. benzophenone (BP), 2-hydroxy-4-methoxybenzophenone (BP-3), ethylhexyl salicylate (EHS) and homosalate (HMS)) from three different water matrices. The procedure was based on a ternary solvent system containing tiny droplets of ionic liquid (IL) in the sample solution formed by dissolving an appropriate amount of the IL extraction solvent 1-hexyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate ([HMIM][FAP]) in a small amount of water-miscible dispersive solvent (methanol). An ultrasound-assisted process was applied to accelerate the formation of the fine cloudy solution, which markedly increased the extraction efficiency and reduced the equilibrium time. Various parameters that affected the extraction efficiency (such as type and volume of extraction and dispersive solvents, ionic strength, pH and extraction time) were evaluated. Under optimal conditions, the proposed method provided good enrichment factors in the range of 354–464, and good repeatability of the extractions (RSDs below 6.3%, n = 5). The limits of detection were in the range of 0.2–5.0 ng mL⁻¹, depending on the analytes. The linearities were between 1 and 500 ng mL⁻¹ for BP, 5 and 500 ng mL⁻¹ for BP-3 and HMS and 10 and 500 ng mL⁻¹ for EHS. Finally, the proposed method was successfully applied to the determination of UV filters in river, swimming pool and tap water samples and acceptable relative recoveries over the range of 71.0–118.0% were obtained.     

Physical properties of 3-methyl-N-butylpyridinium tricyanomethanide and ternary LLE data with an aromatic and an aliphatic hydrocarbon at T = (303.2 and 328.2) K and p = 0.1 MPa

Several physical properties were determined for the ionic liquid 3-methyl-N-butylpyridinium tricyanomethanide ([3-mebupy]C(CN)₃): liquid density, viscosity, surface tension, thermal stability and heat capacity in the temperature range from (283.2 to 363.2) K and at 0.1 MPa. The density and the surface tension could well be correlated with linear equations and the viscosity with a Vogel-Fulcher-Tamman equation. The IL is stable up to a temperature of 420 K.Ternary data for the systems {benzene + n-hexane, toluene + n-heptane, and p-xylene + n-octane + [3-mebupy]C(CN)₃} were determined at T = (303.2 and 328.2) K and p = 0.1 MPa. All experimental data were well correlated with the NRTL model. The experimental and calculated aromatic/aliphatic selectivities are in good agreement with each other.     

Selection of entrainers in the 1-hexene/n-hexane system with a limited solubility

Vapor-liquid equilibria (VLE) have been measured for five 1-hexene/n-hexane/ionic liquid systems and 1-hexene/n-hexane/NMP (N-methyl-2-pyrrolidone) system with a headspace-gas chromatography (HSGC) apparatus at 333.15 K. The ionic liquids investigated were 1,3-dimethylimidazolium tetrafluoroborate [C₂MIM]⁺[BF₄]⁻, 1-butyl-3-methylimidazolium tetrafluoroborate [C₄MIM]⁺[BF₄]⁻, 1-methyl-3-octylimidazolium tetrafluoroborate [C₈MIM]⁺[BF₄]⁻, 1,3-dimethylimidazolium dicyanamide [C₂MIM]⁺[N(CN)₂]⁻ and 1-octylquinolinium bis(trifluoromethylsulfonyl)amide [C₈Chin]⁺[BTA]⁻. It was found that at low feeding concentration of 1-hexene and n-hexane, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ > [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ > [C₈MIM]⁺[BF₄]⁻ > [C₈Chin]⁺[BTA]⁻, which is consistent with the priori prediction of the COSMO-RS (conductor-like screening model for real solvents) model. But at high feeding concentration, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ < [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ < [C₈MIM]⁺[BF₄]⁻ < [C₈Chin]⁺[BTA]⁻. The liquid demixing effect should be taken into account. The activity coefficients of 1-hexene and n-hexane at infinite dilution calculated with the COSMO-RS model were correlated using the NRTL, Wilson and UNIQUAC model. In this work the predictive results from the COSMO-RS model and UNIFAC model for the 1-hexene/n-hexane and 1-hexene/n-hexane/NMP systems were compared. The UNIFAC model is one of the most important academic contributions by Prof. Jürgen Gmehling.     

Temperature dependence of the surface tension and 0.1 MPa density for 1-Cn-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate with n = 2, 4, and 6

Experimental air–liquid interfacial tension data and density data are presented for three 1-C_n-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphates (FAP), [C_nMIM][(C₂F₅)₃PF₃], with n = 2, 4, and 6, measured at atmospheric pressure in the temperature range from 267 K to 360 K using the Krűss K100MK2 tensiometer. The accuracy of the surface tension measurements was checked by employing the Wilhelmy plate and the du Noüy ring methods in parallel. The combined standard uncertainty associated with the Wilhelmy plate method is estimated to be ±0.1 mN · m⁻¹. The density data were obtained using buoyancy method with an estimated standard uncertainty less then ±0.4 kg · m⁻³ (3 · 10⁻⁴ϱ). The chloride anions decrease the density of the tris(pentafluoroethyl)trifluorophosphates of interest up to six times more effectively than they decrease the density of the imidazolium based tetrafluoroborates. A QSPR analysis of the surface tension of imidazolium based ionic liquids with BF₄, TFA, DCA, FAP, NTf₂, and PF₆ anions indicates, that the FAP ionic liquids fit well into the analyzed group of imidazolium based ionic liquids while those having hexafluorophosphate anion show anomalously high deviations of the experimental surface tension from the values predicted by the QSPR model.     

Liquid–liquid equilibrium for binary and ternary systems containing di-isopropyl ether (DIPE) and an imidazolium-based ionic liquid at different temperatures

Liquid–liquid equilibrium (LLE) data were determined for two binary systems {di-isopropyl ether (DIPE) + 1-ethyl-3-methylimidazolium-ethylsulfate (EMISE)} and {DIPE + 1-butyl-3-methylimidazolium-tetrafluoroborate([Bmim][BF₄])}at temperatures between 293.15 K and 313.15 K. LLE data for six ternary systems {DIPE + water + EMISE} and {DIPE + water + [Bmim][BF₄]} at 293.15 K, 303.15 K, and 313.15 K were also reported. Experiments were carried out at atmospheric pressure using stirred and thermo-regulated cells. The experimental data were correlated with the well-known NRTL and UNIQUAC activity coefficient models. In addition, distribution coefficients and selectivities of the ionic liquids EMISE and [Bmim][BF₄] for water in the DIPE phase were measured.