Vapor pressure,speciation, and chemical activities in highly concentrated sodium borate solutions at 277 and 317°C

The system H₂O-B₂O₃-Na₂O has been studied experimentally at 277 and 317°C. The activities of water and boric acid have been determined at mole ratios Na/B from 0 to 1.5, and total dissolved solids 3 to 80 weight percent. The activity of boric acid has been fitted to within experimental error using a speciation model with eight complex species. This model is consistent with the model previously published by Mesmer et al. The electrolyte properties of the liquid are modeled using the Pitzer-Simonson model of very concentrated electrolyte solutions. The calculated values of water activity agree with experiment, and the activity of NaOH and pOH have also been calculated. The potassium borate system also was briefly studied at 317°C, and is adequately described by a model with five complex species. The potassium borate liquid is more alkaline at K/B= 1 than a sodium borate liquid at the same mole ratio, but pOH in the two systems is the same at lower mole ratios.     

烃类裂解结焦抑制剂的研究

开发烃类裂解结焦抑制剂是现代石油化工中的重要研究课题,美国、苏联、日本等国已相继将其成功地用于乙烯装置,我国于80年代开始研究这种抑制剂,且已取得一些进展,由于我国的裂解原料日趋重质化,结焦问题尤为突出,本文以大庆轻柴油为裂解原料,对获得高效、廉价结焦抑制剂进行了研究。     

Determination of amorphous silica and total silica in plant materials

Amorphous silica in plant material was dissolved with potassium carbonate solution, after nitric acid/hydrogen peroxide digestion. Total silica in plant material and some minerals was obtained after ashing and fusing in nickel crucibles with potassium hydroxide containing potassium tetraborate/nitrate. The relative standard deviation for determinations of silicon by these methods in plant material was <2% for plant material containing 2–2100 μmol Si g^?1 (dry weight).     

Formation of aromatic polyetherketone and trans-etherification of aromatic polyetherketone

High molecular weight aromatic polyetherketone (PEK) was found to react with 4,4′-difluorobenzophenone (DFB) in the presence of potassium carbonate in benzophenone or diphenyl sulfone at 300°C, yielding low molecular weight PEK with fluorophenyl end groups, while neither polyetheretherketone (PEEK) nor poly-thioetheretherketoneketone was found to react under similar conditions. Reaction model experiments showed that 4-fluoroben-zophenone reacts with potassium carbonate at 300°C to yield benzoyldiphenyl ether and that benzoyldiphenyl ether undergoes spontaneous trans-etherification in the presence of potassium carbonate at 300°C. These results indicate that the overall reaction yielding PEK of reduced molecular weight consists essentially of DFB oligomerization followed by trans-etherification between the DFB oligomer and PEK. © 1993 John Wiley & Sons, Inc.     

Preparation and characterization of the double potassium salt of sulfosalicyclic acid as a standard substance in alkalimetry

Summary The utility of the double potassium acid salt of sulfosalicylic acid as an alkalimetric standard substance has been studied. To this end an appropriate preparative procedure has been elaborated. This procedure includes partial neutralization of sulfosalicylic acid with potassium carbonate in a hot water-ethanol solution followed by four crystallizations of a crude product from a water-ethanol mixture, 11 by volume. The preparations of the salt prepared according to this procedure are well reproducible and homogeneous. The average content of the pure compound in 6 preparations assayed, based on 36 independent precise titrations was found to be equal to 100.008%±0.030%. The salt proved to be stable up to 280°C, and well soluble in water.These results allow to recommend the double potassium acid salt of sulfosalicylic acid as a primary standard in alkalimetry.Presented at Euroanalysis V, Kraków, August, 26–31, 1984.     

Degradation of poly(ethylene-co-methacrylic acid)-calcium carbonate nanocomposites

Composites of poly(ethylene-co-methacrylic acid) with 5 mass fraction percent of precipitated calcium carbonate nanoparticles were prepared by melt extrusion on a miniature melt-blender and medium-scale production equipment. The composites consisted mostly of isolated particles. The ultimate mechanical properties of the nanocomposites were consequently largely superior to composites with micron-sized filler. The calcium carbonate particles were shown to offer a large surface area for calcium salt formation during the thermal degradation of the material. This imparted a stabilizing effect to the copolymer that was comparable to the neutralization of the methacrylic acid units with calcium ions. The rate of calcium salt formation was fast at temperatures above 350 °C. Stearic acid surface coatings did not interfere significantly with the calcium salt formation. The oxidative stability of the composites was further largely improved by the formation of a diffusion barrier.     

Determination of traces of rubidium in high purity cesium chloride by electrothermal atomic absorption spectrometry (ETAAS) using boric acid as a modifier

The use of boric acid as a modifier for the determination of trace amount of rubidium in high purity cesium chloride matrix by electrothermal atomic absorption is described. It was found that the negative influence of the chloride matrix could not be eliminated using stabilized temperature platform (STPF) alone. Due to the high dissociation energy (D₀ = 427 kJ mol⁻¹) of rubidium chloride, it was difficult to dissociate in the gas phase and hence is lost. Elimination of interferences was achieved by the addition of boric acid as a chemical modifier. Diluted cesium chloride samples (5%, m/v) were analyzed applying the standard addition method. The characteristic mass of 24 pg was obtained. The detection limit of the proposed method is around 26 ng g⁻¹. The developed method was applied to the determination of traces of rubidium in high purity cesium chloride samples. The data obtained by this method were in good agreement with those obtained by other independent method like FAAS.     

Effects of modified multi-walled carbon nanotubes on the curing behavior and thermal stability of boron phenolic resin

One kind of boron phenolic resin (BPR) was prepared from the solvent-less reaction of resoles with boric acid. X-ray photoelectron spectroscopy (XPS) showed that the reaction degree of boric acid was 83.8%. Multi-walled carbon nanotubes (MWCNTs) were modified by nitric acid, 4,4′-Diaminodiphenyl methane and boric acid. The effect of modification was determined by Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA) techniques and XPS. The cure kinetics and thermal behavior of BPR and modified multi-walled carbon nanotubes (m-MWCNTs)/BPR were studied. It was found that the curing apparent activation energy (E_a) decreased with the increasing amount of m-MWCNTs. But there was no obvious change in the orders of curing reactions. The results of TGA showed that 1.0 wt% of the m-MWCNTs could increase the thermal decomposition temperature (T_d) and the char yield of m-MWCNTs/BPR nanocomposites by 36.7 °C and 6.2%. These critical enhancements will definitely help to attract more researches on this area.     

The thermodynamics of aqueous borate solutions I. Mixtures of boric acid with sodium or potassium borate and chloride

Potentials for the cell without liquid junction where M is sodium or potassium are reported over a range of ionic strength to I=3 mol-kg^–1 at 5 to 55°C. Total boron concentration in the solutions was restricted to low levels to minimize formation of polynuclear boron species. Cell potentials are treated with the Pitzer ion interaction treatment for mixed electrolytes, with linear ionic strength dependence assumed for the activity coefficient of undissociated boric acid. Trace activity coefficients of sodium and potassium borates in chloride media are calculated at various temperatures.     

Sulfide and sulfoxide based poly(ether-amide)s: Synthesis and characterization

Two new diacid monomers, 2,2′-sulfide bis(4-methyl phenoxy acetic acid) and 2,2′-sulfoxide bis(4-methyl phenoxy acetic acid) were successfully synthesized by refluxing the 2,2′-sulfide bis(4-methyl phenol) and 2,2′-sulfoxide bis(4-methyl phenol) with chloroacetonitrile in the presence of potassium carbonate, and subsequent basic reduction. Two novel series of poly(sulfide-ether-amide)s and poly(sulfoxide-ether-amide)s with aliphatic units in the main chain were prepared from diacids with various diamines.The polyamides were obtained in quantitative yields and their inherent viscosities were in the range of 0.43-0.89 dl g⁻¹ at a concentration of 0.5 g dl⁻¹ in N,N-dimethylacetamide (DMAc) solvent at 25 °C. They showed good thermal stability. The temperature for 10% weight loss in argon atmosphere was in the range of 350-415 °C. The polymers showed glass transition temperatures between 228 and 261 °C. Almost all of the polyamides were readily soluble in a variety of polar solvents such as N-methyl-2-pyrrolidone (NMP) and dimethyl sulfoxide (DMSO).     

Use of multivariate statistical techniques to optimize the simultaneous separation of 13 phenolic compounds from extra-virgin olive oil by capillary electrophoresis

Characterization of phenolic compounds in olive oil has not been achieved as yet, owing to the complexities of their chemical structures and analytical matrix. The aim of this work is to optimize and validate a method for simultaneous separation and quantification of 13 phenolic compounds from extra-virgin olive oil: tyrosol, hydroxytyrosol, oleuropein glycoside, ferrulic acid, p-coumaric acid, cinnamic acid, p-hydroxybenzoic acid, gallic acid, caffeic acid, luteolin, apigenin, vanillic acid and 3,4-dihydroxybenzoic acid. A statistical central composite design, response surface analysis and the simultaneous optimization method of Derringer and Suich were used to separate all the peaks. These multivariate procedures were efficient in determining the optimal separation condition, using five peak-pair resolutions and runtime as responses. The optimized method employed a fused-silica capillary of 50 μm i.d. × 60 cm effective length with extended light path, 50 mmol L⁻¹ boric acid electrolyte, 10.2 pH, 25 °C, injection of 50 mbar for 25 s with application of reverse voltage (−30 kV for 5 s) before setting the running voltage (+30 kV) with detection at 210 nm and a run time of 12 min. Peak resolutions are found to be very sensitive to pH values outside the 10.15-10.25 range but acceptable electropherograms can be obtained for a wide range of boric acid concentrations within this pH interval.     

Auswertungen von Tetraphenyloboratniederschlägen. I

Zusammenfassung Durch starke Säuren werden Alkalitetraphenyloborate in Borsäure und ein Gemisch organischer Spaltprodukte zerlegt. Die entstehende Borsäure läßt sich in bekannter Weise mit 1,1-Dianthrimid photometrisch bestimmen. Eine Arbeitsvorschrift zur indirekten spektralphotometrischen Bestimmung von Kalium, Rubidium und Cäsium wird angegeben. Das Verfahren wurde statistisch und anhand von Beleganalysen geprüft.

---

Evaluations of tetraphenyloborate precipitates

Summary The alkali tetraphenyloborates are decomposed by strong acids into boric acid and a mixture of organic fission products. The resulting boric acid can be determined photometrically in known manner with 1,1-dianthrimide. A working procedure for the indirect spectrophotometric determination of potassium, rubidium and cesium is given. The method was tested statistically and with reference to check analyses.

     

Nucleophilic aromatic substitution reaction of nitroarenes with alkyl- or arylthio groups in dimethyl sulfoxide by means of cesium carbonate

Treatment of nitroarenes having electron-withdrawing groups at the ortho or para position with alkanethiol in the presence of cesium carbonate in dimethyl sulfoxide at 25 °C leads to nucleophilic displacement of the nitro group with the alkylthio group. Cesium carbonate is superior to other bases such as potassium carbonate, sodium carbonate, and triethylamine. The cesium-mediated nucleophilic aromatic substitution reaction provides a mild yet powerful and user-friendly protocol for the synthesis of aryl sulfides.     

Retention of ionisable compounds on high-performance liquid chromatography XVIII: pH variation in mobile phases containing formic acid,piperazine, tris,boric acid or carbonate as buffering systems and acetonitrile as organic modifier

In the present work dissociation constants of commonly used buffering species, formic acid, piperazine, tris(hydroxymethyl)–aminomethane, boric acid and carbonate, have been determined for several acetonitrile–water mixtures. From these pK_a values a previous model has been successfully evaluated to estimate pH values in acetonitrile–aqueous buffer mobile phases from the aqueous pH and concentration of the above mentioned buffers up to 60% of acetonitrile, and aqueous buffer concentrations between 0.005 (0.001 mol L⁻¹ for formic acid–formate) and 0.1 mol L⁻¹. The relationships derived for the presently studied buffers, together with those established for previously considered buffering systems, allow a general prediction of the pH variation of the most commonly used HPLC buffers when the composition of the acetonitrile–water mobile phase changes during the chromatographic process, such as in gradient elution. Thus, they are an interesting tool that can be easily implemented in general retention models to predict retention of acid–base analytes and optimize chromatographic separations.     

Application of Potassium Carbonate as Space Holder for Metal Injection Molding Process of Open Pore Copper Foam

Copper foam has recently being applied to replace aluminium as heat sink. In this study, copper foam was manufactured via metal injection molding technique. Copper feedstock were prepared comprising 0 wt.%, 30 wt.% and 40 wt.% of potassium carbonate into copper powder to produce open pore cell structure, which also mixed together with a binder system consisting palm stearin (PS), polyethylene (PE) and stearic acid (SA). The feedstock was then injection molded into tensile shape test piece prior to solvent extracted in heptane prior to sintering using tube furnace at 850^oC for 4 hours in nitrogen atmosphere. The sintered samples were immersed in warm water to dissolve the carbonates. Copper foam has successfully manufactured at 850^oC for 4 hours in nitrogen atmosphere followed by the dissolution process. The porosity value increased as the addition of potassium carbonate increased from 0 to 40 wt.% which given the highest value of 52.985% porosity and thermal conductivity of 520.46 W/m.K.     

Determination of indium in high purity antimony by electrothermal atomic absorption spectrometry (ETAAS) using boric acid as a modifier

The use of boric acid as a modifier for the determination of trace amount of indium in high purity antimony by electrothermal atomic absorption is described. It was found that the negative influence of the hydrofluoric acid, used for the digestion could not be eliminated by using stabilized temperature platform furnace (STPF) alone. Due to the high dissociation energy (D₀ = 506 kJ mol⁻¹) of indium fluoride, it is difficult to dissociate in the gas phase and hence is lost. In presence of HF (used for the dissolution of antimony), the universal Pd-Mg modifier does not work satisfactorily. Additionally, rising corrosion and reduced tube lifetime were observed when the acid digested (HF-HNO₃) antimony solution was injected in to the platform. Improvement in platform life and elimination of interferences were achieved by the addition of boric acid as a chemical modifier together with ruthenium coating of the platform. Corrosive changes of the transversely heated graphite atomizer (THGA) platform surface were examined by scanning electron microscopy. The standard addition method was applied. A characteristic mass of 36 pg was obtained. The detection limit of the proposed method is around 0.04 μg g⁻¹. The developed method was applied to the determination of indium in real samples. The data obtained by this method were in good agreement with those obtained by ICP-MS.     

Ultratrace analysis for trans,trans-muconic acid by electrophoric derivatization and capillary gas chromatography

A highly sensitive method is described for the determination of trans,trans-muconic acid (MA), a biomarker of benzene exposure. The method is based on the derivatization of MA with an electrophoric reagent, 2-(pentafluorophenoxy)ethyl-2-(piperidino)ethanesulfonate, using potassium carbonate and 18-crown-6 ether as reaction activators. The resulting pentafluorophenoxy derivative of MA was analyzed by capillary GC with an electron-capture detector (ECD). The lower quantitation limit of the method is attainable at 0.3 μM of MA with a detection limit of about 60 nM (S/N=3) (60 fmol per 1.0 μl injection). Application of the method to the analysis of MA in urine proved feasible.     

Separation of the high-ceiling diuretic Torasemide and its metabolites by capillary zone electrophoresis with diode-array detection

A capillary zone electrophoretic method was developed for the separation of the high-ceiling loop diuretic Torasemide and three of its metabolites (M1, M3 and M5) using an experimental design approach. Two different experimental designs were employed to optimize the developed method: (i) a fractional factorial design examining six factors at two levels (2(6-2)) and (ii) a central composite design examining two factors at two levels (2(2)+2x2+p). The factors studied were: pH, buffer concentration, proportion of boric acid in the mixed boric acid:potassium dihydrogen phosphate background electrolyte, temperature, applied voltage and percentage of organic modifier. Resolution between peaks was established as response. Separation of the four studied compounds was achieved in less than 8 min, using an electrolyte of 20 mM boric acid:potassium dihydrogen phosphate (75:25 v/v) with 15% MeOH adjusted to pH 9.7 with KOH, at a potential of 28 kV. Detection wavelength and temperature were 206 nm and 35 degrees C, respectively.     

Synthesis of 3-Aryl-1,3,5-pentanetricarboxylic acid trialkylesters via a Tandem Addition-Rearrangement-Addition Reaction

 In the presence of anhydrous potassium carbonate as base, triethylbenzylammonium chloride as phase transfer catalyst, and dimethylformamide as solvent, 4-nitrophenylsulfonylacetate was treated with alkyl acrylate at 70°C to afford the unexpected 3-aryl-1,3,5-pentanetricarboxylic acid trialkylesters via a tandem addition-rearrangement-addition reaction. A possible mechanism was suggested.     

Effect of Column Temperature on the Retention of Inorganic Anions and Organic Acids in Non-Suppressed Anion-Exchange IC

An investigation has been conducted into the effect of column temperature on the retention of inorganic anions and organic acids in non-suppressed ion chromatography on an anion-exchange column. Potassium biphthalate and p-hydroxybenzoic acid–tris–boric acid were used as mobile phases. The column temperature was from 25 to 50 °C. Endothermic and exothermic retention of inorganic anions were both observed when potassium biphthalate was used as mobile phase. When p-hydroxybenzoic acid–tris–boric acid was used as mobile phase, however, endothermic behavior only was observed. Moreover, for the two mobile phases, variation of the retention time of the system peaks with changing temperature was reversed. For retention of the organic acids, only endothermic behavior was observed with the two mobile phases. Variation of retention time was greater when p-hydroxybenzoic acid–tris–boric acid was used as mobile phase than when potassium biphthalate was used. These results indicated the exchange reaction in anion-exchange chromatography could be either endothermic or exothermic, depending on the solute and mobile phase ions involved. Different relative changes of retention time were observed for individual inorganic anions and organic acids with increasing column temperature. In general, variation of retention time with increasing temperature was greater for strongly retained inorganic anions and organic acids than for weakly retained species. Van’t Hoff plots for inorganic anions, organic acids, and system peaks were linear. Selectivity variation of the retention of inorganic anions and organic acids was achieved by changing the temperature. In achieving optimum separation of inorganic anions and organic acids, temperature was a valuable tool. To reduce the retention times of the ions and avoid interference from system peaks in non-suppressed anion-exchange ion chromatography with the two mobile phases, a low column temperature, for example, 35 °C, was best.