Factors influencing the mechanism of surfactant catalyzed reaction of vitamin C-ferric chloride hexahydrate system

The kinetics of vitamin C by ferric chloride hexahydrate has been investigated in the aqueous ethanol solution of basic surfactant viz. octadecylamine (ODA) under pseudo-first order conditions. The critical micelle concentration (CMC) of surfactant was determined by surface tension measurement. The effect of pH (2.5–4.5) and temperature (15–35°C) in the presence and absence of surfactant were investigated. Activation parameters, ΔE _a, ΔH ^#, ΔS ^#, ΔG ^≠, for the reaction were calculated by using Arrhenius and Eyring plot. Surface excess concentration (Γ_max), minimum area per surfactant molecule (A _min), average area occupied by each molecule of surfactant (a), surface pressure at the CMC (Π_max), Gibb’s energy of micellization (ΔG _M°), Gibb’s energy of adsorption (ΔG _ad°), were calculated. It was found that the reaction in the presence of surfactant showed faster oxidation rate than the aqueous ethanol solution. Reaction mechanism has been deduced in the presence and absence of surfactant.     

Hydrolysis of dioxouranium(VI): a calorimetric study in NaClaq and NaClO4 aq, at 25 °C

We report the results of a calorimetric study on the hydrolysis of UO₂²⁺ in different ionic media (NaClO_4 aq, NaCl_aq) at 25 °C. Experiments in NaCl were performed at different ionic strength, at I≤1 mol l⁻¹. The species considered in both ionic media were UO₂(OH)⁺, (UO₂)₂(OH)₂²⁺ and (UO₂)₃(OH)₅⁺, and in addition (UO₂)₃(OH)₄²⁺ and (UO₂)₃(OH)₇⁻ in NaCl_aq. The dependence on ionic strength of enthalpy changes in NaCl_aq was expressed by the simple linear equation ΔH_pq=ΔH°_pq+aI^1/2 (a, empirical parameter). Comparison with literature findings is given and some recommended values are reported.     

Thermal and spectral studies of 5-(phenylazo)-2-thiohydantoin and 5-(2- hydroxyphenylazo)-2-thiohydantoin complexes of cobalt(II), nickel(II) and copper(II)

Complexes of 5-(phenylazo)-2-thiohydantoin (L¹) and 5-(2-hydroxyphenylazo)-2-thiohydantoin (HL²) with Co(II), Ni(II) and Cu(II) salts have been synthesised and characterized by elemental analysis, conductivity, magnetic susceptibility, UV-Vis, IR, ESR and TG studies. The magnetic and spectral data suggested octahedral geometry for [L¹M(OAc)₂(H₂O)₂]·xH₂O {M=Ni^ll and Cu^ll} and [L¹CuCl₂(H₂O)]·H₂O (dimeric form for the latter), trigonal bipyramidal geometry for [L²Co(OAc)(H₂O)]·2H₂O, square pyramidal geometry for [L²Ni(OAc)(H₂O)]·H₂O and square planar geometry for [L²CuCl]·2H₂O. TG studies confirmed the chemical formulations of these complexes and showed that their thermal degradation takes place in three to five steps, depending on the type of the ligand and the geometry of the complex. The kinetic parameters (n, E^#, A, ΔH^#, ΔS^# and ΔG^#) of the thermal decomposition stages were computed using the Coats-Redfern and other standard equations and are discussed.     

Study on ion–solvent interactions of alkali metal salts in pure methanol and its binary mixtures with ethane-1,2-diol by a conductometric technique

Electrolytic conductivities of some sodium salts (NaI, NaSCN, CH₃COONa) have been studied in 0, 25, 50 and 75 mass% ethane-1,2-diol + methyl alcohol mixtures at 293.15, 298.15 and 303.15 K. The limiting molar conductivity (Λ°), the association constant (K_A) and the distance of closest approach of ion (R) have been evaluated using the Fuoss conductance equation (1978). The association constant (K_A) decreases with temperature while it tends to decrease in the order: 0 mass% > 25 mass% > 50 mass% > 75 mass% ethane-1,2-diol + methyl alcohol mixtures. Thermodynamic parameters ΔH°, ΔG° and ΔS° along with the Walden products (Λ°η) are obtained and discussed. The results have been interpreted in terms of ion–solvent interactions and structural changes in the mixed solvents.     

The densities and viscosities of aqueous solutions of glycine and glycylglycine containing carbohydrates and structural properties of the ternary systems

Apparent molar volumes, V _? for glycine (Gly) and glycylglycine (Gly-Gly) in aqueous D(+)-glucose and sucrose solutions have been determined from solution density, ρ measurements at 298.15, 303.15, 308.15, and 313.15 K as a function of the concentration of solutes (Gly and Gly-Gly). The standard partial molar volume, V _? ⁰ , transfer volume, ΔV _?(tr) ⁰ , for Gly and Gly-Gly from water to aqueous carbohydrate solutions, partial molar expansibility, E _? ⁰ , and hydration number, n _H of solute have been calculated. The viscosity data have been analyzed by means of Jones-Dole equation to obtain A- and B-coefficients, free energy of activation of viscous flow per mole of solvent, Δμ ₁ ^0# , and solute, Δμ ₂ ^0# , enthalpy, ΔH ^0#, and entropy of activation, ΔS ^0# of viscous flow were evaluated. The behavior of these parameters has been interpreted in terms of solute-solute and solute-solvent interactions.     

Kinetic and thermodynamic properties of the aerial oxidation of hydroquinone in developer solutions

The aerial oxidation kinetics of hydroquinone in a freshly prepared developer solution at different temperatures and pHs has been studied. The activation parameters, Ea, ΔG# , ΔS# , ΔH# and enthalpy of formation of activated complex, ΔHfo(X# ), are determined. The large negative value of free energy of activation ΔG# proves that hydroquinone extremely tends to be oxidized by air at optimum temperature (20℃) and optimum pH (10.5) and converts to the activated complex semiquinone. It was also found that if the pH of the developer solution is increased from 9.3 to 10.5 the reaction rate will increase by a factor of 2.     

Hydrophobic interaction chromatography of proteins: Thermodynamic analysis of conformational changes

For BSA and β-lactoglobulin adsorption to hydrophobic interaction chromatography (HIC) stationary phases leads to conformational changes. In order to study the enthalpy (ΔH_ads), entropy (ΔS_ads), free energy (ΔG_ads) and heat capacity (Δc_p,ads) changes associated with adsorption we evaluated chromatographic data by the non-linear van’t Hoff model. Additionally, we performed isothermal titration calorimetry (ITC) experiments. van’t Hoff analysis revealed that a temperature raise from 278 to 308 K increasingly favoured adsorption seen by a decrease of ΔG_ads from −12.9 to −20.5 kJ/mol for BSA and from −6.6 to −13.2 kJ/mol for β-lactoglobulin. Δc_p,ads values were positive at 1.2 m (NH₄)₂SO₄ and negative at 0.7 m (NH₄)₂SO₄. Positive Δc_p,ads values imply hydration of apolar groups and protein unfolding. These results further corroborate conformational changes upon adsorption and their dependence on mobile phase (NH₄)₂SO₄ concentration. ITC measurements showed that ΔH_ads is dependent on surface coverage already at very low loadings. Discrepancies between ΔH_ads determined by van’t Hoff analysis and ITC were observed. We explain this with protein conformational changes upon adsorption which are not accounted for by van’t Hoff analysis.     

Kinetics and mechanism of hydroboration reactions of HBBr2 · SMe2 and HBCl2 · SMe2 - Application of B NMR spectroscopy

The kinetics and mechanism of the hydroboration reactions of 1-octene with HBBr₂ · SMe₂ and HBCl₂ · SMe₂, in CH₂Cl₂ as a solvent, were studied. Rates of hydroboration were monitored using ¹¹B NMR spectroscopy. The reactions exhibited simple second-order kinetics of the form . The HBCl₂ · SMe₂ was found to be 20 times more reactive than the HBBr₂ · SMe₂. The overall activation parameters (ΔH^≠, ΔS^≠) for the reaction of HBBr₂ · SMe₂ with 1-octene were found to be 82 ± 1 kJ mol⁻¹, −18 ± 4 J K⁻¹ mol⁻¹ and with 1-hexyne were 78 ± 4 kJ mol⁻¹ −34 ± 12 J K⁻¹ mol⁻¹. For the reaction of HBCl₂ · SMe₂ with 1-octene, ΔH^≠ and ΔS^≠ were 104 ± 5 kJ mol⁻¹ and 43 ± 16 J K⁻¹ mol⁻¹, respectively. The activation parameters (ΔH^≠, ΔS^≠) for the dissociation of Me₂S from HBBr₂ · SMe₂ were found to be 104 ± 2 kJ mol⁻¹, +33 ± 8 J K⁻¹ mol⁻¹, respectively. Based on the activation parameters, it was concluded that the detaching of Me₂S from the boron centre follows a dissociative mechanism, while the hydroboration process follows an associative pathway. It was also concluded that the dissociation of Me₂S from the boron centre is the rate determining step.     

Synthesis, structure and dynamic stereochemistry of (O → Si)-chelate N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]acetamide and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine: Retention of the O → Si coordination in the adduct with KF and 18-crown-6

The novel compounds, N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]-acetamide (1a) and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine (1b) have been prepared from the corresponding NH-compounds using ClCH₂SiCl₃/Et₃N or ClCH₂SiCl₃/(Me₃Si)₂NH followed by methanolysis or hydrolysis of the reaction mixture in the presence of Lewis bases, and then BF₃ etherate. Potassium-(18-crown-6)-(2-oxoperhydroazepinomethyl)tetrafluorosilicate (2) was synthesized by reaction of the trifluoride (1b) with KF in the presence of 18-crown-6. Using ¹⁹F, ²⁹Si NMR and X-ray diffraction techniques it was established that the silicon atom is pentacoordinate in the trifluorides (1a, b) and hexacoordinate in the adduct 2. Thus the internal coordination of the O → Si bond present in the trifluoride (1b) is retained in the adduct 2.The stereochemical non-rigidity of the trifluorides (1a, b) and the N-(trifluorosilylmethyl)-N-methylacetamide (1c) was investigated using dynamic ¹⁹F NMR spectroscopy. The activation barriers for permutational isomerization are in the range 9.5-10 kcal mol⁻¹. Lower values of ΔG^# for permutation of trifluorides (1a-c) compared to the monofluorides with the coordination core OSiC₃F together with small negative values for the activation entropy implies a non-dissociative mechanism. Quantum-chemical analysis suggests a mechanism involving a turnstile rotation.     

Surface activity and thermodynamic properties of water‐soluble polyester surfactants based on 1,3‐dicarboxymethoxybenzene used for enhanced oil recovery

The surface activity and thermodynamic properties for eight low molecular weight nonionic co‐polyester (PE) surfactants have been investigated. Surface and interfacial tensions (IFT) of surfactants in aqueous solutions were measured using the spinning drop technique. From these measurements, the critical micelle concentration (CMC), the surface pressure at CMC (Y_CMC), the maximum surface concentration (Γ_max), the minimum area/molecule at the aqueous solution/air interface (A_min), the effectiveness of surface tension reduction (Π_CMC), the alkane carbon number (n_min) and the IFT at n_min (Y_min) were determined. The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic and ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad and ΔS_ad) for these polymeric surfactants were also calculated. Structural effects on micellization and adsorption are discussed in terms of these parameters. The results show that the ΔG_ad values were more negative than ΔG_mic values for these compounds, so that they favored adsorption before the micellization process. They exhibited IFT in the order of 10⁻³ to 10⁻⁴ mN/m against the thin alkane carbon number range 6–9. This range seemed to be prefered for enhanced oil recovery. Copyright © 2000 John Wiley & Sons, Ltd.     

Thermodynamics of undecanolactone,tridecanolactone, and pentadecanolactone from 0 to 340 K

The heat capacities C_p^o of undercanolactone, tridecanolactone, and pentadecanolactone have been measured between 10 and 370 K in a vacuum adiabatic calorimetric cryostat within about 0.2 per cent. The temperatures and enthalpies of physical transitions have been also estimated. The enthalpies of combustion of the compounds have been measured in an isothermal calorimeter with an accuracy of 0.05 per cent. From the results the functions {H (T) ? H (0)}, S^o(T), and {G^o(T) ? H^o(0)} have been calculated over the range 0 to 340 K, and the values of ΔH_f^o, ΔG_f^o and ΔS_f^o have been evaluated at T = 298.15 K.     

1H NMR Study of Hindered Internal Rotation of Tetramethylthiuram Disulfide in Binary Dimethyl Sulfoxide‐Chloroform Mixtures

Hindered internal rotation about the C‐N single bonds joining the thiuram disulfide was studied by ¹H NMR complete line‐shaped analysis in different dimethyl sulfoxide‐chloroform (DMSO‐CDCl₃) mixtures. From the temperature dependence of methyls proton spectra, activation parameters (E_a, ΔH^≠, ΔS^≠, and ΔG^≠) were obtained. The Arrhenius plots showed a distinct isokinetic temperature at about 35 °C at which the exchange rate is more or less independent of the solvent composition. The resulting ΔH^≠ against TΔS^≠ plot showed a firmly good linear correlation, indicating the existence of an enthalpy‐entropy composition in an exchange process.     

NMR spectroscopic conformational analysis of 4‐methylene‐cyclohexyl pivalate—The effect of sp2 hybridization

The conformational equilibrium of the axial/equatorial conformers of 4‐methylene‐cyclohexyl pivalate is studied by dynamic NMR spectroscopy in a methylene chloride/freon mixture. At 153 K, the ring interconversion gets slow on the nuclear magnetic resonance timescale, the conformational equilibrium (?ΔG°) can be examined, and the barrier to ring interconversion (ΔG^#) can be determined. The structural influence of sp² hybridization on both ΔG° and ΔG^# of the cyclohexyl moiety can be quantified.     

Kinetics of oxidation of cysteine and captopril via Cs3[Mo(CN)8] and Cs3[W(CN)8]

The kinetics of the oxidation of cysteine and captopril via octacyanomolybdate(V) and octacyanotungstate(V) in a buffered acidic media (pH range 2.20–4.80) have been studied spectrophotometrically. The rate law for the oxidation is: Rate = k [RSH] [Ox] [H⁺]⁻¹, where RSH is cysteine or captopril and Ox is Cs₃[Mo(CN)₈] or Cs₃[W(CN)₈]. The activation parameters (E_a, ΔH^#, ΔG^#, ΔS^#) for the oxidation of cysteine and captopril via Cs₃[Mo(CN)₈] or Cs₃[W(CN)₈] have been determined. The results indicate that Cs₃[Mo(CN)₈] is more reactive than Cs₃[W(CN)₈] as an oxidizing agent. Effects of pH, ionic strength, temperature, dielectric constant of the reaction medium and copper(II) ions on the oxidation rate have been studied. Mechanisms for the oxidation of cysteine to cystine and captopril to the corresponding disulfide have been proposed.     

Ionic solvation in water + co-solvent mixtures. Part 8. Total free energies of transfer and free energies of transfer with the “neutral” component removed of single ions from water into water + acetone

The acid dissociation constants of a wide range of acids in water+acetone mixtures have been combined with values for the free energy of transfer of the proton. ΔG⁰_t(H⁺ to calculate values for the free energy of transfer of ions which derive only from the charge on the ion. ΔG⁰_t(i)_c. As the values of ΔG⁰_t(H⁺) have been revised, revised values for the total free energies of transfer of cations and anions, ΔG⁰_t(M⁺) and ΔG^o_t(X^-), are given. New data for ΔG^o_t(MX_n) is also split into values for ΔG⁰_t(Mⁿ⁺) (where n=1 and 2) and ΔG⁰_t(X^?). These free energies of transfer, both total and those deriving from the charge alone, are compared with similar free energies in other mixtures water+co-solvent. Values for ΔG^o_t(i)_c do not conform to a Born-type relationship and show the importance of structural effects in the solvent even when only the transfer of the charge is involved.     

Norfloxacin La(III)-based complex: synthesis,characterization, and DNA-binding studies

A La(III) complex, [La^IIICl₂(NOR)₂]Cl (2), containing norfloxacin (NOR) (1), a synthetic fluoroquinolone antibacterial agent, has been synthesized and characterized by elemental analysis, IR, UV–vis spectra and ¹H NMR spectroscopy, and molar conductance measurements. The interaction between 2 and CT-DNA was investigated by steady-state absorption and fluorescence techniques in different pH media, and showed that 2 could bind to CT-DNA presumably via non-intercalative mode and the La(III) complex showed moderate ability to bind CT-DNA compared to other La(III) complexes. The binding site number n, and apparent binding constant K_A, corresponding thermodynamic parameters ΔG^#, ΔH^#, ΔS^# at different temperatures were calculated. The binding constant (K_A) values are 0.23 ± 0.05, 0.56 ± 0.05, and 0.18 ± 0.08 × 10⁵ L mol^?1 for pH 4, 7, and 11, respectively. It was also found that the fluorescence quenching mechanism of CT-DNA by La(III) complex was a static quenching process.     

Activation parameters of supercritical and gas-phase β-pinene thermal isomerization

New data on enthalpy and entropy contributions to the energy barrier of β-pinene thermal isomerization were obtained. The rate of β-pinene conversion is higher in supercritical EtOH (P = 120 atm) than in the gas phase (P ≤ 1 atm, without solvent, or for inert carrier gas N₂) at equal temperatures. The highest activation energy E _Σ of total β-pinene conversion is also observed in reactions in the supercritical (sc) condition. Activation parameters ΔH _Σ ^# , ΔS _Σ ^# , and ΔG _Σ ^# depend strongly on the reaction pressure. Thus, at P ≤ 1 atm (gas-phase reaction) the values of ΔS _Σ ^# are negative, while at sc conditions at P = 120 atm is positive. The linear dependences lnk _Σ0 ? E _Σ and ΔS _Σ ^# ? ΔS _Σ ^# indicate an isokinetic relation (IKR) and enthalpy-entropy compensation effect (EEC). The isokinetic temperature was calculated (T _iso = 605.5 ± 22.7 K). It was shown that elevation of temperature reduces the value of ΔG _Σ ^# (T) upon sc thermolysis only, whereas in all gas-phase reactions ΔG _Σ ^# (T) increases. At equal reaction temperatures, the greatest values of K _eq ^# (T) proved to be typical for thermolysis in sc-EtOH. We hypothesize that the rate of total β-pinene conversion increases dramatically due to a considerable shift in equilibrium toward higher concentrations of activated complex y _TS ^# . A detailed analysis of activation parameters shows that the IKR and EEC coincide, evidence of a common mechanism of β-pinene conversion observed under different reaction conditions, including thermolysis in sc-EtOH.     

Stability of 3<Emphasis Type="Italic">d</Emphasis>-element cyclotetraphosphates in water

The hydrolysis kinetics of the anion in 3d-element cyclotetraphosphates is considered. The thermodynamic functions of formation (Δ _f H ⁰, Δ _f G ⁰, and Δ _f ? _at ⁰ ) of the cyclotetraphosphates are calculated using the ion increment method. A linear correlation is established between and log K Δ _f ? _at ⁰ for these compounds.     

Electron donor-acceptor interaction of 3,4-dimethylaniline with 2,3-dicyano-1,4-naphthoquinone

The electron donor–acceptor (EDA) interaction between 2,3-dicyano-1,4-naphthoquinone (DCNQ) and 3,4-dimethylaniline (3,4-DMA) is studied in chloroform, dichloromethane and 1:1 (v/v) mixture of chloroform and dichloromethane. The rate of formation of the product was measured as a function of time using UV–vis spectrophotometer. The formation constant (K) and molar extinction coefficient (?) values for the formation of EDA complex were evaluated in the temperature range of 20–35 °C. The pseudo-first-order rate constant (k₁) and the second-order rate constant (k₂) for the disappearance of EDA complex and for the formation of product were evaluated. The activation parameters (ΔH^#, ΔS^# and ΔG^#) of the reaction were determined by temperature dependence of rate constants using the Arrhenius plots. The effect of relative permittivity of the medium on the reaction is discussed. The observed results indicate that formation of final product proceeds through initial formation of EDA complex as an intermediate. The product of the reaction was purified by column chromatography method and identified as 3-(N-3,4-dimethyl-phenylamino)-2-cyano-1,4-naphthoquinone by elemental analysis, IR and NMR spectroscopy. On the basis of kinetic, analytical and spectroscopic results, a plausible mechanism for the formation of EDA complex and its transformation into product is proposed.