首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Liquid–liquid equilibrium (LLE) data for the ternary systems {hexane + o-xylene + 1-ethyl-3-methylpyridinium ethylsulfate}, {hexane + p-xylene + 1-ethyl-3-methylpyridinium ethylsulfate}, and {hexane + m-xylene + 1-ethyl-3-methylpyridinium ethylsulfate} were determined at T = 298.15 K and atmospheric pressure. Selectivity, percent removal of aromatic, and solute distribution ratio, derived from the experimental equilibrium data, were used to determine if this ionic liquid can be used as a potential extracting solvent for the separation of xylenes from hexane. The consistency of tie-line data was ascertained by applying the Othmer–Tobias equation. The phase diagrams for the ternary systems are shown, and the tie-lines correlated with the NRTL model have been compared with the experimental data.  相似文献   

2.
3.
(Liquid + liquid) equilibrium data are presented for four ternary systems of an alkane, or aromatic compound and ethyl(2-hydroxyethyl)dimethylammonium bis{(trifluomethyl)sulfonyl}imide (C2NTf2) at 298.15 K: [hexane + benzene + C2NTf2], [hexane + p-xylene + C2NTf2], and [hexane, or octane + m-xylene + C2NTf2]. The separation of aromatic hydrocarbons (benzene, or p-xylene, or m-xylene) from aliphatic hydrocarbons (hexane, or octane) is investigated by extraction with the ammonium ionic liquid. Selectivities and distribution ratios are discussed for these mixtures at constant temperature. The data were analysed and compared to those previously reported for other ionic liquids and especially for the system {hexane + benzene + [EMIM][NTf2]}. The nonrandom two liquid NRTL model was successfully used to correlate the experimental tie-lines and to calculate the phase compositions of the ternary systems.  相似文献   

4.
The aim of this work is to determine if the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate is a good solvent for the separation of xylenes and hexane by liquid extraction. With this purpose, liquid-liquid equilibrium (LLE) data for the ternary systems {hexane + o-xylene, or m-xylene, or p-xylene + 1-ethyl-3-methylimidazolium ethylsulfate} were determined at T = 298.15 K and atmospheric pressure. Selectivity and solute distribution ratio, derived from the experimental equilibrium data, were calculated and used to determine if this ionic liquid can be used as a potential solvent for the extraction of xylenes from their mixtures with hexane. The experimental LLE data for the ternary systems were correlated using the NRTL and UNIQUAC models.  相似文献   

5.
LDPE and its blend with cellulose, obtained by extrusion, were UV-irradiated with different doses or biodegraded in soil up to 1 year. Simultaneously, the same samples were 1 year biodegraded after 20 h UV pre-irradiation in the same conditions. The course of photo- and biodegradation was monitored by estimation of average molecular weights and polydispersity, gel amount, changes of PE crystallinity and mechanical properties. Moreover, the biodegradation degree was calculated on the basis of carbon dioxide evolved and surface morphological changes were observed by SEM. It was found that biodegradation of PE + cellulose is hampered by intermolecular crosslinking of both components. Although, the rate of decomposition of PE + cellulose blends is low it is enough for disintegration of such materials in the natural environment.  相似文献   

6.
Liquid–liquid equilibria (LLE) for the ternary system {hexane + benzene + 1-ethyl-3-methylimidazolium ethylsulfate ([emim]C2H5SO4)} have been measured at the temperatures (298.2, 313.2 and 328.2) K and atmospheric pressure. The reliability of the experimental data was tested using the Othmer–Tobias correlation. For the extractive effectiveness of the solvent, the distribution ratio and separation factor curves were plotted and compared with those of sulfolane. In addition, the LLE data were also correlated with UNIQUAC and NRTL models in a satisfactory manner.  相似文献   

7.
8.
A new algorithm/program has been elaborated for simultaneous processing of different sets of vapour–liquid equilibrium data. The program was tested with six binary hexane + isomeric pentanol systems, each of them measured at three different isobaric conditions and one isothermal system of tert-butyl-methyl-ether + 2-methyl-2-propanol measured at three different temperatures. The correlation uses the maximum likelihood method, taking into account real behaviour of vapour phase. The parameters obtained are valid within the whole temperature range of the data, and are consistent in comparison with those obtained from individual correlations of isobars or isotherms. Results are presented for the Wilson and NRTL equations.  相似文献   

9.
This work paper presents vapour–liquid equilibrium (VLE) data for binary (CO2 + nicotine) and ternary (CO2 + nicotine + solanesol) mixtures, at 313.2 K and 6, 8 and 15 MPa. The (CO2 + nicotine) system exhibits three phases (L1L2V) in equilibrium at 8.37 MPa. It is estimated that this system most likely follows the type-III phase behaviour. In the ternary system, the presence of solanesol in the vapour phase was detected only at the pressure of 15 MPa. At this pressure, partition coefficients and separation factors for solanesol/nicotine were calculated for different initial nicotine/solanesol compositions and a strong influence of composition was found. The results were modelled using the Peng–Robinson equation of state (PR EOS) coupled with the Mathias–Klotz–Prausnitz (MKP) mixing rule (PR–MKP model). Good correlations of the binary data, particularly in the case of the (CO2 + nicotine) mixture, were obtained. However, the model could not correlate the ternary data.  相似文献   

10.
11.
A series of zirconium complexes (2c, 2d, 2f, 2g, 2h, 2i) containing symmetrical or unsymmetrical β-diketiminate ligands were synthesized by the reaction of ZrCl4 · 2THF with lithium salt of the corresponding ligand in 1:2 molar ratio. X-ray crystal structures reveal that complexes 2d and 2g adopt distorted octahedral geometry around the zirconium center. These complexes showed moderate activities for ethylene polymerization, when methylaluminoxane (MAO) was used as cocatalyst. The steric and electronic effects of the substituents at the phenyl rings had considerable influence on the catalytic activities of the metal complex, as well as the molecular weights and molecular weight distributions (MWD) of produced polymers. Introduction of electron-withdrawing CF3 group to phenyls in the ligand led to a significant increase of catalytic activities, and complex 2f (p-CF3) exhibited the highest catalytic activity of 7.45 × 105 g PE/mol-Zr · h among the investigated complexes. Complexes 2a-d could produce ultra-high molecular weight polyethylenes (UHMWPE) that were hardly dissolvable in decahydronaphthalene or 1,2-dichlorobenzene under the molecular weight measurement conditions. Nevertheless, polyethylenes with broad MWD could be afforded by complexes 2g-i, which was probably due to the introduction of bulky unsymmetrical ligands leading to the formation of multi active species under polymerization conditions. High-temperature 13C NMR data indicate the linear structure of obtained polyethylenes.  相似文献   

12.
Photodynamic therapy combines visible light and a photosensitizer (PS) in the presence of molecular oxygen to generate reactive oxygen species able to modify biological structures such as phospholipids. Phosphatidylethanolamines (PEs), being major phospholipid constituents of mammalian cells and membranes of Gram‐negative bacteria, are potential targets of photosensitization. In this work, the oxidative modifications induced by white light in combination with cationic porphyrins (Tri‐Py+‐Me‐PF and Tetra‐Py+‐Me) were evaluated on PE standards. Electrospray ionization mass spectrometry (ESI‐MS) and tandem mass spectrometry (ESI‐MS/MS) were used to identify and characterize the oxidative modifications induced in PEs (POPE: PE 16:0/18:1, PLPE: PE 16:0/18:2, PAPE: PE 16:0/20:4). Photo‐oxidation products of POPE, PLPE and PAPE as hydroxy, hydroperoxy and keteno derivatives and products due to oxidation in ethanolamine polar head were identified. Hydroperoxy‐PEs were found to be the major photo‐oxidation products. Quantification of hydroperoxides (PE‐OOH) allowed differentiating the potential effect in photodamage of the two porphyrins. The highest amounts of PE‐OOH were notorious in the presence of Tri‐Py+‐Me‐PF, a highly efficient PS against bacteria. The identification of these modifications in PEs is an important key point in the understanding cell damage processes underlying photodynamic therapy approaches. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

13.
Corresponding-states group-contribution methods (CSGC-ST1 and CSGC-ST2) have been applied to four binary liquid mixtures (propyl acetate + o-xylene, propyl acetate + m-xylene, propyl acetate + p-xylene and propyl acetate + ethyl benzene); two ternary (benzene + cyclohexane + toluene and n-hexane + cyclohexane + benzene) and two quaternary liquid mixtures (pentane + hexane + cyclohexane + benzene and pentane + hexane + benzene + toluene) at 298.15 K. In this work, the CSGC-ST2 method is modified and extended to multicomponent liquid mixtures. The excess magnitudes of surface tension were also calculated and graphs were plotted using Redlich–Kister method.  相似文献   

14.
The cationic polymerization of styrene with the 2-phenyl-2-propanol (CumOH)/AlCl3 · OBu2 initiating system at various dibutyl ether concentrations in a mixture of 1,2-dichloroethane and n-hexane (55:45 v/v) at −15 °C was investigated. The experimental results showed that an increase in dibutyl ether concentration leads to a noticeable decrease in the polymerization rate as well as to the more controlled polymerization in terms of molecular weight (Mn) and molecular weight distribution (MWD) evolutions. The kinetic investigation revealed that the polymerization proceeds in two stages. The first stage is characterized by high polymerization rate and slow initiation relative to propagation. During this stage molecular weight decreases or does not change and MWD increases with conversion. In the second stage considerably slower quasiliving polymerization of styrene occurs. The quasiliving nature of the styrene polymerization by the CumOH/AlCl3 · OBu2 system is proved and mechanistic scheme of the polymerization is proposed.  相似文献   

15.
The N,N′-diaminoethane linked bis-TEMPO nitroxide (C2)-mediated free radical polymerization of styrene at 135 °C in bulk was studied. It was found that under comparable conditions a single nitroxide group of C2 biradical retards the polymerization more than TEMPO. The results were discussed in terms of through-space interactions between two TEMPO moieties of C2 biradical and diffusion effects. According to experimental results analyzed by means of statistical methods, the polymerization system displays a bimodal molecular-weight distribution (MWD) from the beginning of the polymerization process, most probably by undergoing decomposition side reactions leading to irreversible polymer arm (P) separation from PC2P to PC2 and PC2H alkoxyamines. The scale of the decomposition depends rather on the time the system is maintained at the polymerization temperature than on conversion of monomer. Generally, the contribution of low molecular weight chains to overall MWD increases with time of polymerization whereas the contribution of high molecular weight chains to MWD increases for less controlled polymerization systems. For polymers obtained at high [dinitroxide]/[initiator] ratio, the thermal treatment of polystyrene in mass at 135 °C unexpectedly revealed an increase of Mn, which can probably be ascribed to post-polymerization effects involving polystyrene with unsaturated chains end groups.  相似文献   

16.
The microscopic phase behavior of the supercritical carbon dioxide (scCO2) + polyethylene oxide-2,6,8-trimethyl-4-nonyl ether (TMN) + water systems at about 3 wt% of TMN were investigated using a synthetic method with a microscope. The two types of TMN (TMN-3 and TMN-10) used in this work had molecular weight distributions caused by the distribution of the number of ethylene oxide groups. Two different types of phase transition were observed when pressure was decreased gradually at a constant temperature from the high pressure at which the transparent phase was observed to the low pressure at which the separate vapor–liquid phases were observed for the scCO2 + TMN-3 + water system at 3 wt% of TMN-3. The transparent phase was colorless under all experimental conditions and the phase transition from a transparent phase to a turbidity phase with small, dispersed droplets was observed at the higher side phase transition (higher phase transition pressure). As the pressure continued to decrease, another phase transition was observed from the phase with small droplets to a state with an accelerating aggregation of droplets (lower phase transition pressure). In the turbidity phase between the higher and the lower phase transition, the degree of turbidity became higher with decreasing pressure. On the other hand, in the phase observed below the lower phase transition, a new liquid phase adhered to the sapphire windows and the wall inside the optical cell.  相似文献   

17.
Miscibility of blends composed by a linear unsaturated polyester (LUP) with poly(ε-caprolactone) (PCL) of different molecular weights (Mw = 50 × 103, 18 × 103 and 2 × 103) has been studied. The blends were subjected to different thermal treatments and have been studied by FT-IR spectroscopy, differential scanning calorimetry (DSC) and scanning electronic microscopy (ESEM). FT-IR results allow proving the miscibility of the blends at temperatures above the melting temperature of neat PCL. DSC measurements confirm the existence of a crystalline phase corresponding to neat PCL. The crystallization of PCL is observed in a wide range of blends composition, being detected in all the blend compositions when the crystallization time increases. Thermograms show clearly the glass transition temperatures of samples that have been rapidly quenched from the melt. However, the change in the heat flow corresponding to the glass transition temperatures is difficult to detect in samples with high PCL crystallization degree. The analysis of the results indicates that the morphology of the amorphous phase is heterogeneous for LUP + PCL blends and changes depending on the thermal treatment. The ESEM measurements, confirm the heterogeneity of the amorphous phase. The decrease of the molecular weight of the PCL favours the miscibility of the blends.  相似文献   

18.
Liquid–liquid equilibrium (LLE) data for the ternary systems {cyclohexane + benzene + 1-ethyl-3-methylpyridinium ethylsulfate}, {cyclohexane + toluene + 1-ethyl-3-methylpyridinium ethylsulfate}, and {cyclohexane + ethylbenzene + 1-ethyl-3-methylpyridinium ethylsulfate} were determined at T = 298.15 K and atmospheric pressure. Selectivity, percent removal of aromatic, and solute distribution ratio, derived from the equilibrium data, were used to determine if this ionic liquid can be used as a potential solvent for the separation of aromatic compounds from cyclohexane. The phase diagrams for the ternary systems are shown, and the tie-lines correlated with NRTL model have been compared with the experimental data.  相似文献   

19.
A theoretical consideration of molecular weights and molecular weight distribution (MWD) of polymers formed in anionic polymerization proceeding via active centres of two different types under conditions of chain transfer to solvent with a fast exchange between propagating species is presented. Analytical expressions for number-and weight-average degrees of polymerization are obtained. Expressions for Pn and Pw are shown to be the same as in a one-centre process with the apparent intensity of chain transfer proportional to the weight fraction of the polymer formed via “transferring” centres. The polymers formed possess a moderately wide unimodal MWD. The dependence of the polydispersity index on the effective intensity of chain transfer goes through a maximum; for M0/I0 = 103 the maximum value of Pw /Pn is ca. 4,6. The method is suggested for the estimation of the relative reactivity in chain propagation of two active centres from the dependence of molecular weight on initiator mixture composition. The effects of association of active centres on the average molecular weights are analyzed. The case when one of the centres is dormant is also considered.  相似文献   

20.
(Liquid + liquid) equilibrium (LLE) data for the ternary system of (water + butyric acid + oleyl alcohol) at T = (298.15, 308.15, and 318.15) K are reported. Complete phase diagrams were obtained by determining solubility and the tie-line data. The reliability of the experimental tie lines was confirmed by using Othmer-Tobias correlation. The UNIFAC method was used to predict the phase equilibrium data. The phase diagrams for the ternary mixtures including both the experimental and correlated tie lines are presented. Distribution coefficients and separation factors were evaluated for the immiscibility region. A comparison of the solvent extracting capability was made with respect to distribution coefficients, separation factors, and solvent-free selectivity bases for T = (298.15, 308.15, and 318.15) K. It is concluded that oleyl alcohol may serve as an adequate solvent to extract butyric acid from its dilute aqueous solutions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号