Bis(amino)allenylidene complexes by displacement of the MeO group in methoxy allenylidene complexes of chromium and tungsten. Synthesis, DFT calculations and solid-state structures of new bis(amino)allenylidene complexes

Pentacarbonyl dimethylamino(methoxy)allenylidene tungsten, [(CO)₅WCCC(OMe)NMe₂] (1b), reacts with one equivalent of primary amines, H₂NR, by selectively replacing the methoxy group to give dimethylamino(amino)allenylidene complexes, [(CO)₅WCCC(NHR)NMe₂]. When the amine is used in excess both terminal groups, OMe as well as NMe₂, are replaced by the primary amino group giving [(CO)₅WCCC(NHR)₂ ]. The NHR substituent in these complexes may be modified by deprotonation with LDA followed by alkylation. The replacement of the methoxy group in 1b by a secondary amino group, NR₂, can be achieved by a stepwise process. Addition of Li[NR₂] to the C_γ atom of 1b affords an alkynyl tungstate. Subsequent OMe⁻ elimination induced by TMS-Cl/SiO₂ yields the allenylidene complexes [(CO)₅WCCC(NR₂)NMe₂]. When bidentate diamines are used instead of monoamines both substituents, OMe and NMe₂, are replaced and allenylidene complexes are formed in which C_γ constitutes part of a 5-, 6-, or 7-membered heterocycle. The reaction of [(CO)₅CrCCC(OMe)NMe₂] (1a) with diethylene triamine affords an allenylidene complex with a heterocyclic endgroup carrying a dangling CH₂CH₂NH₂ substituent. All reactions follow a strict regioselective attack of the nucleophile at C_γ and proceed with good to excellent yields. The addition of N-H to the C_αC_β bond is not observed. By applying either one of these routes nearly any substitution pattern in bis(amino)allenylidene complex can be realized.     

From alkenylphosphane aminoallenylidene ruthenium(II) complexes to highly unsaturated ruthenaphosphabicycloheptene complexes

The alkenylaminoallenylidene complex [Ru(η⁵-C₉H₇){CCC(NEt₂)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (2) has been prepared by the reaction of the allenylidene [Ru(η⁵-C₉H₇)(CCCPh₂){κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (1) with the ynamine MeCCNEt₂. The reaction proceeds regio- and stereoselectively, and the insertion of the ynamine takes place exclusively at the C_βC_γ bond of the unsaturated chain. The secondary allenylidene [Ru(η⁵-C₉H₇){CCC(H)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (3) is obtained, in a one-pot synthesis, from the reaction of aminoallenylidene 2 with LiBHEt₃ and subsequent treatment with silica. Moreover, the addition of an excess of NaBH₄ to a solution of the complex 2 in THF at room temperature gives exclusively the alkynyl complex [Ru(η⁵-C₉H₇){CCCH₂[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)] (5). The heating of a solution of allenylidene derivative 3 in THF at reflux gives regio- and diastereoselectively the cyclobutylidene complex [Ru(η⁵-C₉H₇) (PPh₃)][PF₆](4) through an intramolecular cycloaddition of the CC allyl and the C_αC_β bonds in the allenylidene complex 3. The structure of complex 4 has been determined by single crystal X-ray diffraction analysis.     

A ruthenium(II) allenylidene complex with a 4,5-diazafluorene functional group: A new building-block for organometallic molecular assemblies

The synthesis of the new ruthenium(II) allenylidene complex [ClRu(dppe)₂CCC₁₁H₆N₂][OTf] (4) (dppe = 1,2-bis(diphenylphosphino)ethane) terminated with a 4,5-diazafluorene ligand is reported. Further coordination of that metal allenylidene to ruthenium and rhenium moieties leads to the bimetallic adducts [ClRu(dppe)₂CCC₁₁H₆N₂{Ru(bpy)₂}][B(C₆F₅)₄]₃ (5a), [ClRu(dppe)₂CCC₁₁H₆N₂{Ru(^tBu-bpy)₂}][PF₆]₃ (5b) and [ClRu(dppe)₂CCC₁₁H₆N₂{Re(CO)₃Cl}][OTf] (6). Their optical and electrochemical properties show that the allenylidene moiety is an attractive molecular clip for the access to larger original redox-active homo/heteronuclear multi-component supramolecular assemblies. The X-ray crystal structure of the allenylidene metal building block is also described.     

Reactions of β-alkoxyvinyl trihalogenomethyl ketones with triethyl phosphite

The Perkow reaction of triethyl phosphite and β-alkoxyvinyl trihalogenomethyl ketones, which have common acyclic or cyclic structural fragment: -O-CC-C(O)CX₂Cl, yielded dienyl phosphates: -O-CC-C[OP(O)(OEt)₂]CX₂ where X = F or Cl, whereas γ-bromo-β-methoxy-α,β-unsaturated trifluoromethyl ketone CF₃C(O)CHC(OMe)CH₂Br gave diene CF₃C[OP(O)(OEt)₂]CH-C(OMe)CH₂.     

Further chemistry of ruthenium butatrienylidene complexes

Several complexes have been obtained from reactions carried out in early attempts to prepare the diynyl complexes Ru(CCCCR)(dppe)Cp* (R = H, SiMe₃). These have been identified crystallographically as the acyl complex Ru{CCC(O)Me}(dppe)Cp* (3), the cationic imido complex [Ru{CCC(NH₂)Me}(dppe)Cp*]PF₆ (4), the binuclear butenynylallenylidene [{Ru(dppe)Cp*}₂{μ-CCC(OMe)CHCMeCC}]PF₆ (5), and the bis(ethynyl)cyclobutenylidene [{Ru(dppe)Cp*}₂{μ-CCC₄H₂(SiMe₃)CC}]PF₆ (6). NMR studies of 5 have revealed the existence of two isomers. Plausible routes for their formation from the putative butatrienylidene intermediate [Ru(CCCCH₂)(dppe)Cp*]⁺ (A) are discussed.     

Hyperpolarizability of donor-acceptor azines subject to push-pull character and steric hindrance

The push-pull character of two series of donor-acceptor azines has been quantified by ¹³C, ¹⁵N chemical shift differences of the partial C(1)N(1) and N(2)C(2) double bonds in the central linking C(1)N(1)-N(2)C(2) unit and by the quotient of the occupations of the bonding π and anti-bonding π^∗ orbitals of these bonds. Excellent correlation of the latter push-pull parameter with the corresponding bond lengths d_CN strongly recommend both the occupation quotients π^∗/π and the corresponding bond lengths as reasonable sensors for quantifying the push, pull character along the CN-NC linking unit, for the donor-acceptor quality of the two series of azines and for the molecular hyperpolarizability ß₀ of these compounds. Within this context, reasonable conclusions concerning the interplay of steric hindrance in the chromophore, push-pull character and hyperpolarizability of the azines and their application as NLO materials will be drawn.     

Polyfluoroaromatic compounds with a NCClR group—a reactive type of polyfluoroarene

This review deals with syntheses and reactivity of polyfluoroarenes with a NCClR group (including those with RCl). The most promising and convenient methods of synthesis of these type compounds are based on co-pyrolysis reactions of low-basic polyfluoroaromatic amines with RCCl₃ type derivatives and the interaction of such amines and polyfluoroaromatic hydrazines with RCX₃ (XCl,F) compounds in the presence of AlCl₃ at moderate temperature; they have no analogues in the nonfluorinated series. Reactions with different nucleophilic reagents, the formation of electrophilic intermediates of the nitrilium cation type and reactions of the latter with aromatic and fluoroaromatic hydrocarbons, amines, and compounds with CN, C≡N and CO multiple bonds are described. It is shown that polyfluoroaromatic compounds with a NCClR group are promising precursors for syntheses of a wide range of compounds of various classes, including heterocyclic derivatives.     

Direct addition of supercritical alcohols, acetone or acetonitrile to the alkenes without catalysts

The reactions of the alkenes with supercritical organic compounds under non-catalytic conditions were investigated. The H and CR₂OH, CH₂COCH₃ or CH₂CN of supercritical alcohols (CHR₂OH), acetone (CH₃COCH₃) or acetonitrile (CH₃CN) added to the CC bonds of alkenes form C-C bonds between the α-carbons of the supercritical organic compounds and the sp² carbons of the alkenes.     

Highly chemo- and stereoselective glycosidation of permethacrylated O-glycosyl trichloroacetimidate reagents promoted by TMSNTf2

TMSNTf₂ has been used efficiently as a promoter in glycosidation reaction involving permethacrylated Schmidt reagents. While TMSNTf₂ is known to be a powerful activator for CO double bonds, we have discovered that this reagent can activate CN double bond selectively, even in the presence of excess CO groups of permethacrylated O-glycosyl trichloroacetimidate substrates. Glycosides are synthesized in moderate to reasonable yields with an excellent overall β-stereoselectivity.     

Synthesis and characterisation of a diphosphaalkene, a diphosphaalkyne and the first diphosphavinyl lithium complex

The preparation and characterisation of a diphosphaalkene, (Me₃Si)PC(OSiMe₃){C(C₂H₄)₃C}C(OSiMe₃)P(SiMe₃), and the second example of a diphosphaalkyne, PC{C(C₂H₄)₃C}CP, are described. In addition, the reaction of another diphosphaalkyne, PC{C(C₆H₄)₃C}CP, with MeLi/LiBr in the presence of tmeda has given the first diphosphavinyl lithium complex, [MePC{Li₂Br(tmeda)₂}{C(C₆H₄)₃C}C{Li₂Br(tmeda)₂}PMe], which is stable at room temperature and has been crystallographically characterised.     

Synthesis of new pentafluorosulfanylacrylates (F5SCHCHCHO, F5SCHCHCN, F5SCHCHCOOCH3) and use of them as dienophiles in Diels-Alder reaction

New pentafluoro-λ⁶-sulfanylacrylates (F₅SCHCHCHO, F₅SCHCHCN, F₅SCHCHCOOCH₃) were synthesized by a convenient and efficient method. These compounds are useful as intermediates in the preparation of pentafluoro-λ⁶-sulfanyl-containing cyclic and heterocyclic Diels-Alder cycloadducts.     

Multicomponent reactions involving p-benzoquinones, diazo esters, titanium(IV) isopropoxide and alcohol in the presence of rhodium(II) acetate as catalyst

A Rh₂(OAc)₄ catalyst derived oxonium ylide intermediate underwent nucleophilic addition with the CC or CO bond of p-benzoquinones. The syntheses of 2-substituted hydroquinones and 1-hydroxy-4-oxocyclohexa-2,5-dienyls have been demonstrated.     

Iodo-alkynyl- and iodo-butadiynyl-ruthenium complexes

Addition of [I(py)₂]BF₄ to Ru(CCH)(dppe)Cp∗ gave the iodovinylidene [Ru(CCHI)(dppe)Cp∗]BF₄1, which could be deprotonated to Ru(CCI)(dppe)Cp∗ 2. The attempted preparation of Ru(CCCCI)(dppe)Cp∗, followed by derivatisation with tcne, gave the dienynyl Ru{CCC[C(CN)₂]CIC(CN)₂}(dppe)Cp∗ 3. The Pd(0)/Cu(I)-catalysed reaction of 3 with Ru{CCCCAu(PPh₃)}(dppe)Cp∗ afforded Ru{CCCC(CN)₂CC(CN)₂Au(PPh₃)}(dppe)Cp∗ 4 by formal replacement of I⁺ by [Au(PPh₃)]⁺. XRD structures of 1-4 are reported.     

N-Perfluoroalkylsulfonylimido derivatives of arenecarboxylic acid amides and their oxidative aza Hofmann rearrangement

The analogues of carboxamides in which the sp²-hybridized oxygen atom is replaced by more electron-withdrawing groups, NSO₂CF₃ and NSO₂C₄F₉, have been synthesized. The resulting N-perfluoroalkylsulfonyl arenecarboxamidines ArC(NSO₂R_f)NH₂ (R_f = CF₃, C₄F₉) undergo an oxidative Hofmann-type rearrangement to the corresponding carbodiimides ArNCNSO₂R_f under the action of (diacyloxyiodo)arenes. Rearrangement of related compounds ArC(NSO₂R)NH₂ (R = CH₃, Ph) containing fluorine-free substituents at the sulfonyl group also occurs in similar conditions. It was found that the reactivity of amidines rises with the increasing electron-withdrawing ability of the substituent R.     

The first evidence for a transient stibaallene ArSbCCR2

Dechlorofluorination of ArSb(F)-C(Cl)CR₂ (CR₂ = fluorenylidene, Ar = 2,4,6-tri-tert-butylphenyl) by tert-butyllithium afforded a 3,4-bis(fluorenylidene)-1,2-distibacyclobutane. The formation of the latter probably involves the transient stibaallene ArSbCCR₂ followed by a head-to-head dimerization via two SbC double bonds. Molecular orbital calculations at the ab initio and DFT levels support the head-to-head dimerization of ArSbCCR₂ with the formation of a 1,2-distibacyclobutane.     

Preparation of E-(1,2-difluoro-1,2-ethenediyl)bis(tributylstannane)

Chlorotrifluoroethene is converted in situ to [F₂CCFSiMe₃]. The crude [F₂CCFSiMe₃] solution is reduced with lithium aluminum hydride to (HFCCFSiMe₃), which (without isolation) is converted to (Z)-HFCCFSnBu₃. Subsequent metallation and trapping of the vinyllithium reagent with Bu₃SnCl gives (E)-Bu₃SnCFCFSnBu₃ in 73% overall yield. Only two isolation steps are required and the use of Me₃SiCl and F₂CCFCl provides a cheap, economical route to this useful synthon.     

New cyclic and macrocyclic silaolefins via ring-closing metathesis of 1,1-bis(silyl)ethene-tethered dienes

Dialkenyl-substituted 1,1-bis(silyl)ethenes of the general formulae (CH₂CH(CH₂)_nMe₂Si)₂CCH₂ and (CH₂CH(CH₂)_nOMe₂Si)₂CCH₂, (where n = 1-3) have been successfully converted into new silacyclic or silamacrocyclic compounds in the presence of ruthenium-benzylidene complex (first generation Grubbs catalyst). The structures of both macrocyclic silaolefins have been confirmed using X-ray diffraction.     

Trifluoromethanesulfonylimides of arenehydroxamic acids and their aza Lossen rearrangement

Trifluoromethanesulfonylimides of arenehydroxamic acids ArC(NSO₂CF₃)NHOH (1), analogues of arenehydroxamic acids, in which sp² hybridized oxygen atom is replaced by the much stronger electron-withdrawing group NSO₂CF₃, have been synthesized, and the abilities of these compounds to undergo transformations similar to the Lossen rearrangement have been studied.At heating O-trimethylsilyl or O-tosyl derivatives of acids 1 rearrange to carbodiimides ArNCNSO₂CF₃ or products of their hydration, the corresponding carbamides. Interaction of acids 1 with sulfinyl chloride or phosphorus pentachloride results in formation of N-trifluoromethylsulfonyl-N′-arenechloroformamidines, ArNHC(Cl)NSO₂CF₃, which were transformed into their morpholine derivatives and thus characterized.