Functionalisation of the template-free and template-structured silica films synthesised on glass substrates by sol–gel technique

Possibility of the post-synthesis functionalisation of the template-free and template-structured silica films of ca. 200 nm thickness on glass slides was evaluated. The films were prepared by dip-coating from TEOS sol–gel precursor in the absence or presence of CTAB template. It has been found out that the template-structured silica films can be functionalised with Ag nanoparticles via [Ag(NH₃)₂]NO₃ ion-exchange or with adsorbed Methylene Blue (MB) cationic dye due to the presence of the well-organised mesopores after template removal. In contrast, only the external geometric surface of the template-free silica films appeared to be accessible for modifier molecules. Possibility of functionalisation of the multi-layered template-structured silica film depends on the sequence of dip-coating and calcination steps upon their preparation. When preparation includes reiteration of dip-coating and calcination steps, only the latest top silica film appears to be accessible to modifier molecules. When preparation includes successive dip-coating cycles accomplished by calcination of the final multi-layered film, all pores appear to be accessible since their formation occurs via simultaneous removal of the template molecules over the whole thickness of the multi-layered template-structured silica film.     

Ce（SO4）2-mediated Oxidative Coupling of Primary Aromatic Amines in Water

The oxidative coupling of primary aromatic amines was investigated. Ce(SO4)2 can mediate the oxidative coupling of primary aromatic amines in water to dimers, trimers and/or tetramers, which depended on the substituents of primary aromatic amines. When 2,6-dimethylaniline or 2,6-diethylaniline was used as substrate, dimer, and tetramer were formed as major products. When 2,6-diisopropylaniline or 2,6-dihaloanilines was used as substrate, dimer, and trimer were formed. The mechanistic aspect was also investi...     

Synthesis of linoleic acid hydroperoxide using immobilized lipoxygenase in polyacrylamide gel

Lipoxygenase from soybean has been immobilized in polyacrylamide gel derivatized with glutaraldehyde as a means to facilitate obtaining hydroperoxy derivatives of linoleic acid. We have found that 10% acrylamide, 6% glutaraldehyde, and pH 8.0 are the best conditions for the coupling of enzyme to gel. Although catalytic efficiency is lowered by the coupling process, the stability of the system is maintained at a high level, and lipoxygenase products are not altered by the immobilization process. The use of the system in a reactor revealed that no effect of self-inactivation is produced by long-term reaction, thereby making feasible the use of a lipoxygenase bioreactor for the synthesis of lipoxygenase products.     

Structural analysis of SiO2 gel films by high energy electron diffraction

The structure of SiO₂ gel-films prepared from acid and basic TEOS solutions is analyzed by high energy transmission electron diffraction method. The Si-O bond length of gel-films is 1.58 to 1.60 Å, which is shorter than that of vitreous silica (1.61 Å) but similar to that of 80 Å thick evaporated a-SiO₂ film. An atomic pair peak with 0.81 Å distance exists on the reduced radial distribution functions of the gel-films, which is believed to be O-H, but being smaller than that of H₂O (0.969 Å).     

Synthesis,structural and electrical characterization of PbS NCs in titania sol–gel films

Nanocrystals of lead sulfide were grown in TiO₂ (titania) thin films prepared by a sol-gel process. The synthetic procedure as well as the structural, optical, and electrical properties of the films are demonstrated. The structures and morphology of PbS nanocrystals were analyzed using HRTEM, SAED, AFM, HRSEM, XRD and EDAX elemental analysis technique. When the concentration of PbS in the titania matrix is 20 mol%, PbS NCs with a diameter of 2.0 nm are created. At a higher PbS concentration (> 40 mole%) in the titania matrix, PbS NCs and PbS clusters are created not only within the TiO₂ film but also on the external surface of the TiO₂ film. By increasing the PbS concentration up to 50 mol%, PbS nanocrystals of 6–8 nm in diameter are formed within the titania film and PbS clusters with a base size of about 100 nm² and a height up to about 20 nm were self assembled on the external surface of TiO₂ film. Quantum size effect and band gap energies were obtained from shifts of the absorption edge. For electrical measurements, PbS–TiO₂ films were deposited on an ITO/glass substrate, and then covered with gold contact. The electrical properties of ITO/PbS NCs–TiO₂/Au and ITO/PbS NCs–TiO₂/PbS cluster/Au structures were studied. I–V characteristics of the one layer structure are nearly linear and symmetric, while those of the two-layer structure exhibit rectifying behavior.     

固相萃取-气相色谱-质谱法测定儿童彩泥中的初级芳香胺

建立了固相萃取-气相色谱-质谱(SPE-GC-MS)检测儿童彩泥中苯胺等9种初级芳香胺的方法。对彩泥样品采用超声萃取法,以甲醇为提取剂于室温下反复提取2次,提取液经过浓缩后与还原剂溶液在70℃反应30 min,将反应后的溶液通过Oasis HLB固相萃取柱净化收集后进行检测。采用本方法成功实现了9种初级芳香胺的分离检测,方法的定量限为5 mg/kg,实际样品的平均回收率在70%～110%之间。本方法准确、快速、灵敏度高,可用于儿童彩泥中初级芳香胺的实际检验。     

双酚S/双酚A环氧树脂固化物的相容性研究

采用高分子材料动态力学谱（TBA）和傅立叶变换红外光谱（FTIR）两种方法研究了双酚S／双酚A环氧树脂／芳胺固化体系的固化过程。探讨了在双酚S环氧树脂（BPSER）和双酚A环氧树脂（BPAER）以不同质量比与固化剂4，4'- 二氨基二苯甲烷（DDM）组成固化体系中，所得固化产物的相容性。结果表明，在一个很宽的BPSER／BPAER比例范围，其固化产物具有良好的相容性。     

Hydrolysis of starch or pullulan by glucoamylase or pullulanase immobilized on poly(N-isopropylacrylamide) gel

Starch or pullulan was hydrolyzed using glucoamylase or pullulanase immobilized on N-isopropylacrylamide gel. The gel used is temperature sensitive; its mesh size becomes smaller at higher temperatures (30 °C) and larger at lower temperatures (20 °C). The molecular weight distribution of starch is wide and it consists of high-molecular-weight amylopectin, amylose and glucose. From the change in the chromatograms for the substrate and products, it was found that the hydrolysis rate at 30 °C was faster than that at 20 °C for amylose, though it was the reverse for amylopectin. This finding suggests that the smaller molecular sized amylose can enter the gel phase at both temperature, while the larger molecular sized amylopectin can hardly do so; only the end group, which can partly enter the gel phase at 20 °C (larger mesh size), was hydrolyzed. Further, several molecular weight pullulans (monodisperse) were hydrolyzed and the experimental chromatograms for substrate and products confirm the hydrolysis mechanism estimated. Received: 14 July 1998 Accepted in revised form: 26 August 1998     

Modification of the immobilized metal affinity electrophoresis using sodium dodecyl sulfate polyacrylamide gel electrophoresis

Modification to the original immobilized metal affinity electrophoresis (IMAEP) technique is presented. SDS-PAGE is used instead of native PAGE for improved extraction of phosphoproteins from a mixture of proteins. Protein samples treated with 2% w/v SDS instead of native sample buffer ensure that proteins are negatively charged. These negative charges on the proteins assure that the proteins migrate electrophoretically towards the anode regardless of their pI values and hence pass through the region embedded with the metal ions. Another benefit of treating proteins with SDS is that it unfolds the phosphoproteins exposing the phosphate groups to facilitate the metal-phosphate interactions. Phosphorylated ovalbumin can only be extracted after SDS sample buffer treatment. Data show that there is no detrimental effect upon SDS treatment on the extraction of phosphoproteins from a mixture of proteins. Electrophoretic migration of phosphoproteins ceases upon encounter with metal ions like Al+3, Ti+3, Fe+3, Fe+2, and Mn+2 whereas non-phosphorylated proteins migrate freely.     

Influence of silica gel pretreatment and bonding technique on PAH selectivity of octadecyl bonded phases

Summary The effect of silica gel pretreatment and of different bonding techniques, on the chromatographic properties of octadecyl bonded phases is described. The experiments show that a monomeric octadecyl bonded phase, prepared from silica gel that has not been treated before bonding, has a poor selectivity towards polycyclic aromatic hydrocarbons (PAHs) and shows high adsorption of basic components. Silica gel treatment before the bonding of the monofunctional silane does not give a substantial improvement. Polymeric phases on the other hand show a much better PAH selectivity and a lower adsorptivity towards basic components. Further improvement can be achieved with the polymeric modification if silica gel treatment is carried out before bonding.     

Use of Saccharomyces cerevisiae immobilized in agarose gel as a binding agent for diffusive gradients in thin films

A new binding agent, consisting of the yeast Saccharomyces cerevisiae immobilized in agarose, is proposed for use in diffusive gradients in thin films (DGT). Different gel compositions, containing from 4.5% to 20% (m/v) of S. cerevisiae and 1.5-5.0% (m/v) of agarose, were prepared and tested for uptake of Cd(II). For gels containing 20% (m/v) of S. cerevisiae, a mass of 14,900 ng has been attributed as the uptake limit of Cd for each disk. Determination of the Cd retained in the binding agent was readily carried out using a slurry of the agarose-yeast disk introduced directly into the inductively coupled plasma optical emission spectrometer. The performance characteristics of the DGT samplers, which were assembled with the proposed binding agent (25 mm disk containing 20% of S. cerevisiae and 1.5% of agarose) and a diffusive layer of cellulose (chromatographic paper 3MM Chr of 25 mm diameter), were evaluated by measuring the Cd(II) uptake at various pH values and ionic strengths. Very consistent results were found within the pH range 4.5-7.5 and at ionic strengths ≥0.005 mol L⁻¹. The precision of DGT measurements was characterized by relative standard deviations of <8%. No changes in the uptake of Cd(II) were observed in the samplers that were assembled with recently prepared disks or 35-day-old stored disks. The proposed material has been applied to the analyses of river and sea water samples. For determination of Cd(II), excellent agreement between the results obtained from devices assembled with the proposed material and those assembled with conventional material (Chelex-100 resin) were obtained, strongly validating the use of the agarose-yeast gel disk as a new binding agent for DGT.     

A post curing strategy toward the feasible covalent adaptable networks in polyacrylate latex films

The implementation of covalent adaptable networks (CANs) in general resin system is becoming attractive. In this work, we propose a simple post-curing strategy based on the core-shell structured acrylate latex for the achievement on both the improved general performance and the CANs characteristics in latex films. The building to the CANs was relied on the introduction of 4,4′-diaminophenyl disulfide as the curing agent, which cured the acetoacetoxy decorated shell polymer through the ketoamine reaction. The metathesis reaction of aromatic disulfides in the crosslinking segments enabled the thermally induced dynamic behavior of the network as revealed in the stress relaxation tests by comparison with other diamine crosslinking agents without the incorporation of disulfide. The synergism of the dynamic crosslinking of the shell polymer and static crosslinking in the core polymer contributed to the improved mechanical strength (15 MPa, strain% = 250%) and the suppressed water adsorption (~1% in 24 h of soaking) of the latex film, which exhibited above 90% of recovery in both strength and strain from a cut-off film damage within 1 h at 80°C. Moreover, the cured latex film could be recycled, and 75% of the mechanical performance was regained after three fragmentation-hot-pressing cycles. These, in addition with the feasible and environmental friendly characteristics, suggest a sustainable paradigm toward the smart thermosetting latex polymers.     

Novel fiber-optic biosensor based on immobilized glutathione S-transferase and sol–gel entrapped bromcresol green for the determination of atrazine

The aim of this work was to investigate, for the first time, the potential of the enzyme glutathione S-transferase I (isoenzyme GST-I) for uses in analytical chemistry. A novel fiber-optic biosensor for the detection and determination of the triazine herbicide atrazine was developed based on maize GST-I expressed in E. coli. The sensing bioactive material was a three-layer mini-sandwich. The enzyme was immobilized on the outer layer that consisted of a hydrophilic polyvinylidenefluoride membrane. This membrane was supported on an inner glass disk by means of an intermediate binder sol–gel layer that incorporated bromcresol green (BCG). The biosensor operated in a static mode at 25 °C and the rate of the enzymatic reaction, using atrazine as a substrate, served as an analytical signal. A calibration curve was obtained for atrazine, with analytically useful concentration range 2.52–125 μM. The sensor detection limit was 0.84 μM. The reproducibility of atrazine sensing was in the order of ±3–5%. The method was successfully applied to the determination of this herbicide in real water samples, without sample preparation steps. Atrazine recovery ranged between 85 and 110%. No interference from other pesticides, such as alachlor and carbaryl was observed in the absence of atrazine. The immobilized enzyme retained about 75% of its original activity after 1 month use. Simply unscrewing the terminal holding ring of the probe and placing a new bioactive sandwich could easily replace a deteriorated mini-sandwich.     

Preconcentration of phthalic acid esters in water samples by Saccharomyces cerevisiae immobilized on silica gel

A sensitive and selective column adsorption method is proposed for the off-line preconcentration and determination of phthalic acid esters (PAEs), namely benzyl-butyl phthalate (BBP), di-n-butyl phthalate (DBP) and di-cyclohexyl phthalate (DCHP). The PAEs was preconcentrated on Saccharomyces cerevisiae immobilized on silica gel and then determined by high performance liquid chromatography (HPLC). Several parameters on the recovery of the analytes were investigated. Recoveries of BBP, DBP and DCHP were 100±2, 98±2 and 98±3%, respectively, at 95% confidence level under optimum conditions. The detection limits (3S/N) of BBP, DBP and DCHP were 3.2, 6.3 and 3.1 μg l⁻¹, respectively. The capacity of the adsorbent was also examined and found to be 1.4 mg g⁻¹ for BBP and DBP, and 3.6 mg g⁻¹ for DCHP. S. cerevisiae immobilized on silica gel is suitable for repeated use without decreasing recovery up to about 25 adsorption-elution cycles. The proposed method was successfully applied to the determination of PAEs in river water with high precision and accuracy.     

Preparation of nanocrystalline porous titania films on titanium substrates by a sol–gel method with polyethylene glycol as a template

Porous nanocrystalline TiO₂ films have been prepared on cp-Ti substrates for biomedical usage by a sol–gel process from the solutions containing polyethylene glycol (PEG) as a template. Variations of the crystal structure with heat-treatment temperature determined by XRD are different for TiO₂ films and powders, due to the effect of titanium substrate. The surface texture of porous TiO₂ films is analyzed by means of SEM and found to greatly depend on the concentration and molecular weight of PEG. The pore formation mechanism is discussed in relation to the self-assembly of PEG and phase separation between PEG adsorbed on TiO₂ oligomers and ethanol.     

Thioacetamide chemically immobilized on silica gel as a solid phase extractant for the extraction and preconcentration of copper(II), lead(II), and cadmium(II)

Thioacetamide immobilized on silica gel was prepared via the Mannich reaction. The extraction and enrichment of copper(II), lead(II), and cadmium(II) ions from aqueous solutions has been investigated. Conditions for effective extraction are optimized with respect to different experimental parameters in both batch and column processes prior to their determination by flame atomic absorption spectrometry (FAAS). The optimum pH ranges for quantitative adsorption are 4.0-8.0, 2.0-7.0, and 5.0-10.0 for Pb(II), Cu(II), and Cd(II), respectively. Pb(II) and Cd(II) can be desorbed with 3 mol/L and 0.1 mol/L HCl/HNO3, and Cu(II) can be desorbed with 2.5% thiourea. The adsorption capacity of the matrix has been found to be 19.76, 16.35, and 12.50 mg/g for Pb(II), Cu(II), and Cd(II), respectively, with the preconcentration factor of approximately equal to 300 for Pb(II) and approximately equal to 200 for Cu(II) and Cd(II). Analytical utility is illustrated in real aqueous samples generated from distilled water, tap water, and river water samples.     

Zinc(II) complex immobilized on amine functionalized silica gel: a novel,highly efficient and recyclable catalyst for multicomponent click synthesis of 1,4-disubstituted 1,2,3-triazoles

We report a highly efficient and recyclable heterogeneous zinc catalytic system via covalent immobilization of 2-hydroxyacetophenone (2-HAP) onto an amine functionalized silica gel followed by metallation with zinc chloride and its catalytic application in three component click synthesis of 1,4-disubstituted 1,2,3-triazoles. The structure of the synthesized organic–inorganic hybrid material (SiO₂@APTES@2HAP-Zn) has been confirmed by various physicochemical characterization techniques, such as solid-state ¹³C CPMAS NMR spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction analysis (XRD), Brunauer–Emmett–Teller (BET) surface area analysis, scanning electron microscopy (SEM), atomic absorption spectroscopy (AAS), energy-dispersive X-ray fluorescence spectroscopy (ED-XRF), and elemental analysis. The newly designed catalyst works under mild reaction conditions and also exhibits excellent performance in terms of good product yield and high turnover number (TON). One of the most important attributes of the present methodology is that the catalyst can be recycled several times without appreciable loss in its activity as proved by FTIR spectroscopy and SEM analysis. Besides, the heterogeneity test also confirms that no leaching of active catalytic species occurs from the silica supported zinc catalyst which confirms its remarkable structural stability under the reaction conditions.     

硅凝胶在消防灭火中的应用研究

常用的灭火方法有隔离法、窒息法、冷却法;常用的灭火剂有水、泡沫、干粉、卤代烷、二氧化碳等,任何一种灭火剂都可以凭借科学新技术、新成果获得创新的发展。本文在水灭火剂基础上,通过添加试剂使水形成硅凝胶,增加水的加热稳定性,延长水在可燃基材上的停留时间,提高水的     

New solid phase extractors for selective separation and preconcentration of mercury (II) based on silica gel immobilized aliphatic amines 2-thiophenecarboxaldehyde Schiff’s bases

2-Thiophenecarboxaldhyde is chemically bonded to silica gel surface immobilized monoamine, ethylenediamine and diethylenetriamine by a simple Schiff’s base reaction to produce three new SP-extractors, phases (I-III). The selectivity properties of these phases toward Hg(II) uptake as well as eight other metal ions: Ca(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) were extensively studied and evaluated as a function of pH of metal ion solution and equilibrium shaking time by the batch equilibrium technique. The data obtained clearly indicate that the new SP-extractors have the highest affinity for retention of Hg(II) ion. Their Hg(II) uptake in mmol g⁻¹ and distribution coefficient as log K_d values are always higher than the uptake of any other metal ion along the range of pH used (pH 1.0-10.0). The uptake of Hg(II) using phase I was 2.0 mmol g⁻¹ (log K_d 6.6) at pH 1.0 and 2.0. 1.8 mmol g⁻¹ (log K_d 4.25), 1.6 mmol g⁻¹ (log K_d 3.90) and 1.08 mmol g⁻¹ (log K_d 3.37) at pH 3.0, 5.0 and 8.0, respectively. Selective separation of Hg(II) from the other eight coexisting metal ions under investigation was achieved successfully using phase I at pH 2.0 either under static or dynamic conditions. Hg(II) was completely retained while Ca(II), Co(II) and Cd(II) ions were not retained. Ni(II), Cu(II), Zn(II), Pb(II) and Fe(III) showed very low percentage retention values to be 0.74, 0.97, 3.5 and 6.3%, respectively. Moreover, the high recovery values (95.5 ± 0.5, 95.8 ± 0.5 and 99.0% ± 1.0) of percolating two liters of doubly distilled water, drinking tap water and Nile river water spiked with 5 ng/l of Hg(II) over 100 mg of phase I packed in a minicolumn and used as a thin layer enrichment bed demonstrate the accuracy and validity of the new SP-extractors for preconcentration of the ultratrace amount of spiked Hg(II) prior to the determination by borohydride generation atomic absorption spectrometry (AAS) with no matrix interference. The detection limit (3σ) for Hg(II) based on enrichment factor 1000 was 4.75 pg/ml. The precision (R.S.D.) obtained for different amounts of mercury was in the range 0.52-1.01% (N = 3) at the 25-100 ng/l level.