Synthesis, molecular structures, and chemistry of some new palladium(II) and platinum(II) complexes with pentafluorophenyl ligands

A series of palladium(II) and platinum(II) complexes possessing pentafluorophenyl ligands of the general formula [M(L-L)(C6F5)Cl][space](M = Pd 3; L-L=tmeda (N,N,N',N',-tetramethylethylenediamine) a; 1,2-bis(2,6-dimethylphenylimino)ethane) b; dmpe (1,2-bis(dimethylphosphino)ethane) c; dcpe (1,2-bis(dicyclohexylphosphino)ethane) d; Pt ; L-L=tmeda a; 1,2-bis[3,5-bis(trifluoromethyl)phenylimino]-1,2-dimethylethane b; dmpe c; dcpe d) were readily synthesized from the dimer [M(C6F5)(tht)(mu-Cl)2] (M=Pd 1b, Pt 2b; tht=tetrahydrothiophene) and the corresponding bidentate ligand. In the case of palladium, the corresponding iodo analogues (6a-c) were readily synthesized in a one-pot reaction from [Pd2(dba)3], iodopentafluorobenzene, and the appropriate ligand. The platinum complexes 4c-d were then converted to the water complexes [Pt(L-L)(C6F5)(OH2)]OTf (L-L =dmpe 7a; dcpe 7b)via reaction with AgOTf in the presence of water. Attempts to convert the palladium complexes 3c-d to the corresponding water complexes resulted in the disproportionation of the intermediate water complex to form [Pd(L-L)(C6F5)2] (L-L=dmpe 8) or [Pd(L-L)2][OTf]2(L-L=dcpe 9). Upon standing in solution for prolonged periods, complex 7a undergoes an identical disproportionation reaction to the Pd analogues to form [Pt(L-L)(C6F5)2] (L-L=dmpe 10). Complexes 4c and 4d were converted to the corresponding hydrides (11b-c, respectively) using two different hydride sources: 11a was formed by the reaction of with NaBH4 in refluxing THF, while 11b was synthesized in near quantitative yield using [Cp2ZrH2] in refluxing THF. Attempts to synthesize eta2-tetrafluorobenzyne complexes [Pt(L-L)(C6F4)] (L-L=dmpe, dcpe) from reaction of 11a-b with butyllithium were unsuccessful. The molecular structures of 3a,4a, 4c, 4d, 6b, 7a, 8, 11b and have been determined by X-ray crystallographic studies, and are discussed.     

Radical-mediated carboxylation of alkyl iodides with [11C]carbon monoxide in solvent mixtures

[reaction: see text] [carboxyl-(11)C]Carboxylic acids were prepared from alkyl iodides via photoinitiated radical reactions using 10(-)(8) mol of [(11)C]carbon monoxide in binary and ternary homogeneous solvent mixtures. Short- (isobutyric), medium-, and long-chain saturated fatty acids (heptadecanoic) were labeled with isolated decay-corrected radiochemical yields ranging from 55% to 70% in 5-7-min reactions. The conversion of [(11)C]carbon monoxide to products reached 80-90%. To obtain good yields in the reactions performed in water-acetonitrile and water-THF mixtures, the addition of tetrabutylammonium hydroxide or potassium hydroxide was essential. The carboxylation was efficient for primary and secondary alkyl iodides. The carboxylation of tertiary iodides was feasible for 1-iodoadamantane but not for tert-butyl iodide. The dependence of the radiochemical yields on reaction time, photoirradiation conditions, and organic and inorganic additives was studied. The method provides a one-step route to [carboxyl-(11)C]carboxylic acids; traditional methods, in contrast, would require several steps. For example, using the devised reaction conditions, 3.19 GBq of purified [1-(11)C]1,10-decanedicarboxylic acid (specific radioactivity 188 GBq/mumol) was obtained within 35 min of the end of 10 muAh bombardment. (1-(13)C)4-Phenylbutyric acid was synthesized using ((13)C)carbon monoxide for identifying the labeling position with (1)H and (13)C NMR.     

Synthesis of (S)-N-[methyl-11C]nicotine and its regional distribution in the mouse brain: a potential tracer for visualization of brain nicotinic receptors by positron emission tomography.

A nicotine agonist, 11C-labeled (S)-nicotine, was synthesized by N-methylation of (S)-nornicotine with [11C]-methyl iodide in dimethylformamide-dimethylsulfoxide in order to study nicotinic receptors in the human brain by positron emission tomography. The radiochemical yield of this N-methylation reaction was more than 90% within 5 min. After purification by high performance liquid chromatography the radiochemical purity of the product was more than 99% and the specific radioactivity was 7.4-11.1 GBq/mumol. The regional distribution of (S)-[11C]nicotine in the mouse brain after intravenous injection was compared with that of (R)-[11C]nicotine. After injection of (S)-[11C]nicotine, the regional uptake of radioactivity was in the following order: cortex greater than thalamu approximately hippocampus greater than striatum greater than hypothalamus greater than cerebellum. Moreover, (S)-[11C]nicotine was displaced from the brain by unlabeled (S)-nicotine, but unlabeled (R)-nicotine caused no change in uptake. In contrast, (R)-[11C]nicotine showed a lower brain uptake and lesser regional differences in radioactivity.     

Photoinitiated free radical carbonylation enhanced by photosensitizers

[reaction: see text] The enhancing effect of several photosensitizers in photoinitiated radical carbonylation is demonstrated and applied to accelerate the synthesis of compounds labeled with short-lived 11C. With the sensitizers, the synthesis of [carbonyl-11C]esters and acids from alkyl iodides, [11C]carbon monoxide, alcohols, and water provided up to 75-85% decay-corrected radiochemical yields in 6-min reactions under mild conditions. Acetone was used as a sensitizer in preparing 13C-substituted 1,10-decanedicarboxylic acid from (13C)carbon monoxide.     

Biradicals from benzoenyne-allenes. Application in the synthesis of 11H-benzo[b]fluoren-11-ols, 1H-cyclobut[a]indenes, and related compounds

New synthetic pathways to 11H-benzo[b]fluoren-11-ols, 1H-cyclobut[a]indenes, and related compounds via biradicals generated from benzoenyne-allenes were developed. Treatment of the diacetylenic propargylic alcohols 13, derived from condensation between benzophenones and the lithium acetylide of 1-(2-ethynylphenyl)-2-phenylethyne, with thionyl chloride produced the 11-chloro-11H-benzo[b]fluorene 14 and, after hydrolysis, the corresponding 11H-benzo[b]fluoren-11-ols 15. The transformation involved a sequence of reactions, including a biradical-forming C2-C6 cyclization (Schmittel cyclization) reaction of the chlorinated benzoenyne-allene intermediates followed by an intramolecular radical-radical coupling to form the formal Diels-Alder adducts. Interestingly, in the case of the diacetylenic propargylic alcohol 26, obtained from dibenzosuberenone (25), an intramolecular [2 + 2] cycloaddition reaction of the chlorinated benzoenyne-allene intermediate occurred, furnishing the 1H-cyclobut[a]indene 27 exclusively. The dramatic change of the reaction pathway could be attributed to the emergence of a steric strain due to the nonbonded interactions with the chloro substituent along the pathway toward the formal Diels-Alder adduct 31. On the other hand, the non-chlorinated benzoenyne-allene, derived from prototropic isomerization of the diacetylenic hydrocarbon 60, underwent a formal Diels-Alder reaction to furnish the 11H-benzo[b]fluorene-type hydrocarbon 61 exclusively.     

Synthesis of 11C-labelled N,N'-diphenylurea and ethyl phenylcarbamate by a rhodium-promoted carbonylation via [11C]isocyanatobenzene using phenyl azide and [11C]carbon monoxide

The reaction with phenyl azide and [11C]carbon monoxide to give N,N'-diphenyl[11C]urea and ethyl phenyl[11C]carbamate has been studied with the aim of development of a new methodology for carbonylation using [11C]carbon monoxide with high specific radioactivity. The synthesis of 11C-labelled N,N'-diphenylurea from phenyl azide and [11C]carbon monoxide, with 1,2-bis(diphenylphosphino)ethane-bound Rh(I) complex at 120 degrees C at a pressure of 35 MPa in the presence of aniline was accomplished in 82% trapping efficiency and 82% conversion yield. This approach was also useful for the synthesis of ethyl phenyl[11C]carbamate with lithium ethoxide as a nucleophilic reagent giving 90% trapping efficiency and 76% conversion yield. These reactions can be considered to proceed via a [11C]isocyanate or a [11C]isocyanate-coordinated Rh complex to give the corresponding 11C-products. This protocol provides the chemical basis for the synthesis of [11C]urea and [11C]carbamate derived from [11C]isocyanates.     

Dimerization of 9-phenylethynylfluorene to di-indeno-naphthacene and dispiro-[fluorene-dihydronaphthacene-fluorene]: an X-ray crystallographic and NMR study

The attempted Diels-Alder reaction between 9-phenylethynylfluorene and tetracyclone yields instead three products resulting from the dimerization of the isomeric allene. The major product is 8,16-diphenyl-diindeno[1,2,3-de:1',2',3'-mn]naphthacene, in which each terminal ring is derived from a fluorenyl unit; aerial oxidation then yields a peroxide. A dihydronaphthacene bearing fluorenyl moieties spiro-bonded at the C(5) and C(11) positions was also identified. The structures of the naphthacenes were elucidated by X-ray crystallography, and a mechanistic rationale is offered. [reaction: see text]     

Rapid synthesis of C-labeled FK506 for positron emission tomography

The present study describes a rapid synthesis method for labeled [¹¹C]FK506 for positron emission tomography (PET). A one-pot reaction from [¹¹C]CH₃I, involving a Wittig reaction as the key carboncarbon bond formation was developed. The chemical process was accomplished using a designed, fully automated synthetic apparatus, and an injectable solution of [¹¹C]FK506 was obtained in only 34 min from [¹¹C]CH₃I. The decay-corrected radiochemical yield based on [¹¹C]CH₃I was 11.9%, and the specific activity was 39.8 GBq/μmol.     

Synthesis, properties, and NAD+-NADH-type redox ability of 14-substituted 1,3-dimethyl-5,10-methanocycloundeca[4,5]pyrrolo[2,3-d]pyrimidine-2,4(1,3h)-dionylium tetrafluoroborates and their hydride adducts

A synthesis of 14-substituted 1,3-dimethyl-5,10-methanocycloundeca[4,5]pyrrolo[2,3-d]pyrimidine-2,4(1,3H)-dionylium tetrafluoroborates 11a,b(+).BF4- was accomplished by the methylation of 5,10-methanocycloundeca[4,5]pyrrolo[2,3-d]pyrimidine-2,4(1,3H)-dione derivatives with MeI and following anion-exchange reaction by treatment with 42% aq HBF(4). Compound 11b(+).BF4- was synthesized alternatively by the reaction of 1,6-methano[11]annulenylium tetrafluoroborate with 6-phenylamino-1,3-dimethyluracil and following oxidative cyclization reaction. Remarkable structural characteristics of 11a,b(+)were clarified on inspection of the UV-vis and NMR spectral data as well as X-ray crystal analyses. The stability of cations 11a,b(+)() is expressed by the pK(R+) values which were determined spectrophotometrically as 9.8 and 9.7, which are smaller by 1.4 and 1.2 pH units than those of the corresponding seven-membered ring cations, respectively; however, the values are larger by 3.6 and 3.5 pH units than that of the parent 1,6-methano[11]annulenylium ion (pK(R+) = 6.2). The feature is rationalized on the basis of the perturbation derived from the bond fixation of the parent cation and the electron-donating ability of pyrrolopyrimidine. The electrochemical reduction of 11a,b(+).BF4- exhibited reduction potential at -0.58 and -0.52 (V vs Ag/AgNO3) upon cyclic voltammetry (CV). Reaction of 11a(+).BF4- with hydride afforded mixures of the C13- and C11-adducts in a ratio with hydride afforded, on the other hand, the C13-adduct as a single product. In both cations, the methano-bridge seemed to control the nucleophilic attack to the C13 favorably with exo-selectivity. The photoinduced autorecycling oxidation reactions of 11a,b(+).BF4- toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) with the recycling number of 1.1 to 32.2. Furthermore, as an example of the NAD+-NADH models, the reduction of a pyruvate analogue and some carbonyl compounds with the hydride adducts of 11a,b+.BF4- was accomplished for the first time to give the corresponding alcohol derivatives.     

Performances of a TRACERlab FX C synthesis module using a Ni-nanopowder/molecular sieves mixed catalyst

The progress of positron emission tomography goes together with an increasing demand for new radiopharmaceuticals: among these, the development of radiopharmaceuticals labelled with carbon-11 is particularly interesting because these compounds are biologically indistinguishable from their stable analogues. These radiotracers are prepared starting from [¹¹C]carbon dioxide, the most common and versatile primary labelling precursor, or from secondary labelling precursors such [¹¹C]methyl iodide produced by “wet” or “gas-phase” method. The gas-phase is the most used method and consists in the radical reaction of iodine vapours with [¹¹C]methane, produced in target or from [¹¹C]carbon dioxide by reduction with hydrogen on nickel catalyst at high temperature. This second approach is frequently adopted in commercial automatic methylation modules, such as the TRACERlab FX C. When not performed in target, [¹¹C]CH₄ production represents a key step for the [¹¹C]CH₃I synthesis from which the outcome of the whole radiolabelling process depends. In order to improve the performance of the module, a new reduction catalyst made of a mixture of metallic Ni (nanopowder) and molecular sieves mixed in different ratios has been tested. Preliminary results demonstrated that not only the mixture of nanopowder-Ni and molecular sieves represents a valid reduction catalyst but also permits to trap [¹¹C]CO₂ and subsequently use it as labelling reagent, making TRACERlab FX C a module for both methylation and carboxylation.     

过氧铌杂多钨酸盐热分解动力学参数的测定

钼和钨的杂多配合物由于其高催化活性及抗病毒性吸引着人们的关注［１］。杂多配合物的组成改变能调变其酸性、氧化性、反应性等,因此,混配型杂多配合物的研究近二十年来十分活跃。铌取代的杂多配合物在催化方面具有很独特的性质,其催化的工业应用及其机理已引起广泛的兴趣［２］。我们发现,过氧铌杂多配合物比非过氧杂多配合物具有更高的催化活性［３］。杂多酸盐的热稳定性是影响多相催化活性的重要性质,迄今有关过氧杂多配合物的热性质和热分解反应动力学参数的研究未见报道。本文用ＴＧ、ＤＴＡ、ＤＳＣ溶解度试验,变温红外和Ｘ一…     

Synthesis of the bryostatin 1 northern hemisphere (C1-C16) via desymmetrization by ketalization/ring-closing metathesis

[reaction: see text] Synthesis of the northern hemisphere (C1-C16) of bryostatin 1, a potent anticancer agent, has been accomplished in 14 steps and 11% overall yield via desymmetrization by ketalization/ring-closing metathesis. A 2,9-dioxabicyclo[3.3.1]nonane template facilitated stereoselective A-ring functionalization, while an efficient hetero-Diels-Alder reaction was used to elaborate the B-ring.     

3-Aza-cope rearrangement of quaternary N-allyl enammonium salts. Stereospecific 1,3 allyl migration from nitrogen to carbon on a tricyclic template

N-Allyl enamines can undergo a [3,3] sigmatropic rearrangement known as a 3-aza-Cope (or amino-Claisen) reaction. We explored a 3-aza-Cope reaction involving 1,3 allylic migration from nitrogen to carbon in N-allyl enammonium quaternary salts, exemplified by benzo[a]quinolizine 8 and pyrrolo[2,1-a]isoquinoline 13, with an interest in stereochemistry and mechanism. Salts 8 and 13 were accessed, respectively, through stereospecific allylation of hydroxy amines 4 and 11a/11b to give 7 and 12a/12b, which were dehydrated with trifluoroacetic acid. Allylic migration in these tricyclic tetrahydroisoquinolines occurred with high stereospecificity, with the major products 9 (from 8) and 15a (from 13) apparently deriving from a concerted suprafacial [3,3] rearrangement. The rearrangement of 8 to 9 was facile at 23 degrees C (t(1/2) = ca. 5 h) and was >98% stereospecific, whereas the rearrangement of 13 to 15a/15b required heating between 50 and 100 degrees C, with ca. 90-95% stereospecificity (t(1/2) = ca. 0.3 h at 100 degrees C). A deuterium-labeling experiment with 21 ((2)H-13) confirmed that allylic inversion accompanies the 1,3 migration en route to major isomer 22a ((2)H-15a), supporting the predominance of a concerted [3, 3] sigmatropic mechanism. However, the 5-10% loss of stereospecificity in the rearrangements of the pyrroloisoquinolines 13 and 21, reflected by formation of minor isomers 15b and 22b, respectively, indicates a minor nonconcerted reaction pathway.     

Metal telluride clusters composed of niobocene carbonyl, telluride, and cobalt carbonyl units: syntheses, structures, and reactivity

Abstract: The reaction of [Cp#2NbTe2H] (1#; Cp# = Cp* (C5Me5) or Cp(x) (C5Me4Et)) with two equivalents of [Co2(CO)8] gives a series of cobalt carbonyl telluride clusters that contain different types of niobocene carbonyl fragments. At 0 degrees C, [Cp#2NbTe2CO3(CO)7] (2#) and [Co4Te2(CO)10] (3) are formed which disappear at higher temperatures: in boiling toluene a mixture of [cat2][Co9Te6(CO)8] (5#) (cat= [Cp#2Nb(CO)2]+) and [cat2][Co11Te7(CO)10] (6#) is formed along with [cat][Co(CO)4] (4#). Complexes 6# transform into [cat][Co11Te7(CO)10] (7#) upon interaction with HPF6 or wet SiO2. The molecular structures of 2(Cp(x)), 4(Cp(x)), 5(Cp*), 6(Cp*) and 7(Cp*) have been determined by X-ray crystallography. The structure of the neutral 2(Cp(x)) consists of a [Co3(CO)6Te2] bipyramid which is connected to a [(C5Me4Et)2Nb(CO)] fragment through a mu4-Te bridge. The ionic structures of 4(Cp(x)), 5(Cp*), 6(Cp*) and 7(Cp*) each contain one (4, 7) or two (5, 6) [Cp#2Nb(CO)2]+ cations. Apart from 4, the anionic counterparts each contain an interstitial Co atom and are hexacapped cubic cluster anions [Co9Te6(CO)8]2- (5) or heptacapped pentagonal prismatic cluster anions [Co11Te7(CO)10]n- (n=2: [6]2- , n=1: [7]-), respectively. Electrochemical studies established a reversible electron transfer between the anionic clusters [Co11,Te7(CO)10]- and [Co11Te7(CO)10]2in 6# and 7# and provided evidence for the existence of species containing [Co11Te7(CO),0] and [Co11Te7(CO)0]3-. The electronic structures of the new clusters and their relative stabilities are examined by means of DFT calculations.     

Synthesis of the C11-C29 fragment of amphidinolide F

[reaction: see text] An efficient synthesis of the C(11)-C(29) fragment 31 of amphidinolide F has been accomplished via a diastereoselective [3 + 2]-annulation reaction of allylsilane 5 and ethyl glyoxylate to prepare the key tetrahydrofuran 15 and a highly stereoselective methyl ketone aldol reaction to generate the C(11)-C(16) segment.     

An improved method for 14C-labelling of farnesylacetic acid and its geranyl ester

Farnesylacetic acid was efficiently labelled with 14C at the 5-position and gefarnate, a potent ulcer inhibitor, was prepared from it in radioactive form for use in metabolic studies. Condensation of [carbonyl-14C]acetyl chloride (5) with t-butyl 2-ethoxymagnesiomalonate (6) followed by acid-catalyzed deprotection and decarboxylation gave ethyl 3-oxo[3-14C]butanoate (8). Alkylation of the keto ester (8) with geranyl bromide (9) afforded the unsaturated keto ester (10), which was hydrolyzed and decarboxylated to give geranyl[2-14C]acetone (11). Grignard reaction of 11 with cyclopropylmagnesium bromide followed by treatment with hydrobromic acid yielded [4-14C]homofarnesyl bromide (13). Cyanation of 13 with potassium cyanide and subsequent hydrolysis gave [5-14C]farnesylacetic acid (1) in 6.1% yield from barium [14C]carbonate (3). Chlorination of 1 followed by esterification with geraniol afforded [5-14C]gefarnate (2) in 88% yield.     

Aluminum and zinc complexes based on an amino-bis(pyrazolyl) ligand: synthesis, structures, and use in MMA and lactide polymerization

The coordination chemistry of bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine (1, LH) with aluminum- and zinc-alkyls has been studied. Reaction of 1 with AlR3 affords the adducts [LH] x AlR3 (R = Me, 2; Et, 3), which undergo alkane elimination upon heating to yield the amido complexes [L]AlR2 (R = Me, 4; Et, 5). Reaction of LiO(iPrO)C=CMe2 with 2 proceeds via N-H deprotonation to give Li[L]AlMe3 (6), while the former enolate adds to 4 to generate [Me2C=C(OiPr)OLi] x [L]AlMe2 (7). Similarly, the 1:1 reaction of ZnEt2 with 1 gives [LH] x ZnEt2 (9), which is transformed into [L]ZnEt (10) upon heating. When an excess of ZnEt2 was used in the latter reaction, the bimetallic complex [L]ZnEt x ZnEt2 (11) was isolated beside 10. Performing the same reaction in the presence of O2 traces yielded selectively the dinuclear ethyl-ethoxide complex [L]Zn2Et2(mu-OEt) (12), which was alternatively prepared from the reaction of 10 and ZnEt(OEt). Zinc chloride complexes [LH] x ZnRCl (R = Et, 13; p-CH3C6H4CH2, 14) and [L]ZnCl (15) were prepared in high yields following similar strategies. Ethyl abstraction from 10 with B(C6F5)3 yields [L]Zn+EtB(C6F5)3- (16). All complexes have been characterized by multinuclear nuclear magnetic resonance (NMR), elemental analysis, and single-crystal X-ray diffraction studies for four-coordinate Al complexes 2, 4, and 6 and Zn complexes 9-12 and 14. Aluminate species 6 and 7 initiate the polymerization of methyl methacrylate, and the monomer conversions are improved in the presence of neutral complexes 2 or 4, respectively; however, these methyl methacrylate (MMA) polymerizations are uncontrolled. Polymerization of rac-lactide takes place at 20 degrees C in the presence of zinc ethoxide complex 12 to yield atactic polymers with controlled molecular masses and relatively narrow polydispersities.     

"Dimers" and "trimers" of tetrahydroindenes and hexahydroazulenes, respectively generated from [2-(1-cycloalkenyl)ethynyl]carbene complexes (M = W, Cr) by cascade cyclization/cycloaddition reactions

A cascade of cyclization/cycloaddition reactions was triggered by addition of protic oxygen nucleophiles ROH 2 (RO = CH3CO2, PhCO2, PhO) to [2-(1-cyclohexenyl)ethynyl]carbene complexes 1b and 1c (M=W, Cr, respectively), affording highly strained "dimers" 11/11' and "trimers" 12 of the carbene ligand. The first reaction step involved the formation of 1-metalla1,3,5-hexatrienes 7, which readily gave tetrahydroindenes 8 by pi cyclization and extrusion of the metal unit. "Dimers" 11/11' were generated from tetrahydroindenes 8 by a highly exo selective [4+2] cycloaddition of compounds 1b and 1c to afford 1-metalla-1,3,5-hexatriene intermediates 9, and a spontaneous pi cyclization of the latter compounds involving the disengagement of the metal unit. Propenylidene cyclohexenes 13/13' were formed in "ene"-type side reactions to the pi cyclization of 1-metalla-1,3,5-hexatrienes 7, by loss of the metal unit. "Dimers" 11 were transformed into "trimers" 12 by a [4+2] cycloaddition and subsequent pi-cyclization of the resulting 1-metalla-1,3,5-hexatriene system. The course of the reaction was elucidated by means of model reactions with (2-phenylethynyl)carbene complex 14, in which 1-metalla-1,3,5-hexatriene intermediates 16 and 17 were isolated and characterized. Alkynyl benzene derivatives 19 were obtained by an unprecedented ring-expansion of a cyclopentadiene unit of "dimers" 11a and 11c, involving the insertion of a carbene carbon atom of compound 14 into a C=C bond. A reaction cascade leading to "dimers" 24/24' could also be triggered by treatment of compounds 2 with [2-(1-cycloheptenyl)ethynyl]carbene tungsten complex 1d.     

Preparation of N-[11C]methyl-2,5-dimethoxy-4-bromo-amphetamine

For in vivo receptor studies N-[¹¹C]methyl-2,5-dimethoxy-4-bromo-amphetamine, [¹¹C]MDOB, was synthesized by the reaction of [¹¹C]CH₃I with DOB in acetonitrile. The labelling yield was determined in dependence on amount of precursor, time and temperature of the methylation reaction. During 10 to 15 minutes 60% to 70% of [¹¹C]MDOB has been obtained at 110°C.     

Trisilane-1,3-diolato complexes of Ti and Zr: syntheses and X-ray crystal structures

The syntheses and structures of zirconium and titanium complexes containing the novel chelating trisilane-1,3-diolate ligand [Me2Si(R2SiO)2]2- (R = SiMe3) (5)-H2 are reported. The chloride complexes [Me2Si(R2SiO)2]TiCl2 (7a) and [Me2Si(R2SiO)2]ZrCl2 x 2 THF (7b) were prepared by the reaction of MCl4 (M = Ti, Zr) with [Me2Si(R2SiO)2]2Ti (6a) and [Me2Si(R2SiO)2]2Zr (6b), which are derived from the reaction of 5 with M(NEt2)4, respectively. In the presence of TiCl4, complexes 6a and 7a undergo a ring-opening reaction to produce the dinuclear complex [Me2Si(R2SiO)2][TiCl3]2 (9). [Me2Si(R2SiO)2]TiMe2 (10) and [Me2Si(R2SiO)2]TiBnz2 (11) were prepared in moderate yields from reactions of 7a with 2 equiv of MeMgBr and BnzMgCl, respectively. According to NMR spectroscopic investigations, the reaction of the dimethyltitanium complex 10 with B(C6F5)3 led to full exchange of both methyl groups by C6F5 groups under quantitative formation of [Me2Si(R2SiO)2]Ti(C6F5)2 (12) and a mixture of B(C6F5)(3-n)Me(n), where n = 1-3. The structure of 12 is further evidenced by the preparation of an identical sample from the reaction of 7a with 2 equiv of C6F5MgBr. Refluxing an ether solution of 12 surprisingly gave [Me2Si(R2SiO)2]2TiC6F5]2O (13) as a result of ether cleavage. The structures of the complexes 7a, 7b, 9, 10, and 13 were determined by X-ray crystallography, and structural discussion of the bond parameters will be given.