Synthesis and characterization of several dicopper(I) complexes and a spin-delocalized dicopper(I,II) mixed-valence complex using a 1,8-naphthyridine-based dinucleating ligand

The synthesis of dicopper(I) complexes [Cu2(BBAN)(MeCN)2](OTf)2 (1), [Cu2(BBAN)(py)2](OTf)2 (2), [Cu2(BBAN)(1-Me-BzIm)2](OTf)2 (3), [Cu2(BBAN)(1-Me-Im)2](OTf)2 (4), and [Cu2(BBAN)(mu-O2CCPh3)](OTf) (5), where BBAN = 2,7-bis((dibenzylamino)methyl)-1,8-naphthyridine, py = pyridine, 1-Me-Im = 1-methylimidazole, and 1-Me-BzIm = 1-methylbenzimidazole, are described. Short copper-copper distances ranging from 2.6151(6) to 2.7325(5) A were observed in the solid-state structures of these complexes depending on the terminal ligands used. The cyclic voltammogram of compound 5 dissolved in THF exhibited a reversible redox wave at E1/2 = -25 mV vs Cp2Fe+/Cp2Fe. When complex 5 was treated with 1 equiv of silver(I) triflate, a mixed-valence dicopper(I,II) complex [Cu2(BBAN)(mu-O2CCPh3)(OTf)](OTf) (6) was prepared. A short copper-copper distance of 2.4493(14) A observed from the solid-state structure indicates the presence of a copper-copper interaction. Variable-temperature EPR studies showed that complex 6 has a fully delocalized electronic structure in frozen 2-methyltetrahydrofuran solution down to liquid helium temperature. The presence of anionic ligands seems to be an important factor to stabilize the mixed-valence dicopper(I,II) state. Compounds 1-4 with neutral nitrogen-donor terminal ligands cannot be oxidized to the mixed-valence analogues either chemically or electrochemically.     

A heterobimetallic ruthenium(II)-copper(II) donor-acceptor complex as a chemodosimetric ensemble for selective cyanide detection

A trinuclear heterobimetallic Ru(II)-Cu(II) donor-acceptor complex, [Ru(II)((t)Bubpy)(CN)(4)-[Cu(II)(dien)](2)](ClO(4))(2) ((t)Bubpy = 4,4'-di-tert-butyl-2,2'-bipyridine; dien = diethylenetriamine) (1), has been synthesized and successfully used as an chemodosimetric ensemble for the specific detection of cyanide in aqueous DMF. X-ray crystallography, solid and solution IR spectroscopy, and conductivity measurements reveal that complex 1 is a one-dimensional polymer in the crystalline state and dissociates into its [Ru(II)((t)Bubpy)(CN)(2)[(CN)Cu(II)(dien)L](2)](2+) (L = solvent) monomeric units in polar solvents. The MLCT transition and luminescence properties of the solvatochromic [Ru(II)((t)Bubpy)(CN)(4)](2)(-) donor are perturbed by the coordination of two Cu(II) acceptors but restored in the presence of CN(-). Spectroscopic and mass spectrometric studies confirm the cleavage of the cyano bridge between Ru(II) and Cu(II) of the chemodosimetric ensemble after the binding of cyanide to the Cu(II) centers. The overall binding constant, K(B), between 1 and CN(-) is measured to be (7.39 +/- 0.23) x 10(6) M(-2). A detection limit of 1.2 microM (0.03 ppm) of CN(-) in aqueous DMF (pH 7.4) is achievable. Thermodynamic evaluation shows that the analyte specificity of chemodosimeter 1 is attributable to the relative stability of the donor-acceptor complex to that of adducts formed between the acceptor metal center and the analytes.     

Evidence for Cu-O2 intermediates in superoxide oxidations by biomimetic copper(II) complexes

The mechanism by which [Cu(II)(L)](OTf)2 and [Cu(II)N3(L)](OTf) (L = TEPA: tris(2-pyridylethyl)amine or TMPA: tris(2-pyridylmethyl)amine; OTf = trifluoromethanesulfonate) react with superoxide (O2*-) to form [Cu(I)(L)](OTf) and O2 is described. Evidence for a CuO2 intermediate is presented based on stopped-flow experiments and competitive oxygen (18O) kinetic isotope effects on the bimolecular reactions of (16,16)O2*- and (18,16)O2*- ((16,16)k/(18,16)k). The (16,16)k/(18,16)k fall within a narrow range from 0.9836 +/- 0.0043 to 0.9886 +/- 0.0078 for reactions of copper(II) complexes with different coordination geometries and redox potentials that span a 0.67 V range. The results are inconsistent with a mechanism that involves either rate-determining O2*- binding or one-step electron transfer. Rather a mechanism involving formation of a CuO2 intermediate prior to the loss of O2 in the rate-determining step is proposed. Calculations of similar inverse isotope effects, using stretching frequencies of CuO2 adducts generated from copper(I) complexes and O2, suggest that the intermediate has a superoxo structure. The use of 18O isotope effects to relate activated oxygen intermediates in enzymes to those derived from inorganic compounds is discussed.     

Metal-carboxylate coordination polymers with redox-active moiety of tetrathiafulvalene (TTF)

Though numerous metal-organic frameworks or polymers have been reported, the organic building blocks are usually not redox-active. On the other hand, some mono-, di- or tri-nuclear compounds with tetrathiafulvalene (TTF) have been prepared, although little is known about the coordination polymers combined with paramagnetic metals and organic TTF ligands. We report herein a series of coordination polymers of copper(II) and manganese(II) with TTF dicarboxylate ligand (L). Compound 1, [CuL(2,2-bpy)](n), is a one-dimensional (1-D) coordination polymer with five-coordinated square-pyramidal Cu(II) centers. Mn(II) complex 2, [MnL(2,2-bpy)](n), also takes a 1-D structure, showing a double-bridged mode by carboxylate groups. The 4,4-bipyridine compound 3, [MnL(4,4-bpy)(H(2)O)](n)·CH(3)CN, takes a 2-D grid network. A zinc(II) compound 4, [ZnL(4,4-bpy)(H(2)O)](n)·CH(3)CN, isomorphous structure with 3, is also presented. The electrochemical properties of the solid-state compounds were investigated by cyclic voltammetry using surface-modified electrodes. As usually observed in TTF derivatives, two sets of redox-waves were observed. The values of E(1/2)(1) of compounds 1-4 are in the order of 2(Mn) ≈ 3(Mn) < 1(Cu) < 4(Zn), indicating that the metal coordination can affect the potential shift of the TTF ligand. Weak antiferromagnetic exchanges are observed for compounds 1, 2, and 3.     

Catalytic transesterification of dialkyl phosphates by a bioinspired dicopper(II) macrocyclic complex

For a number of phosphoryltransfer enzymes, including the exonuclease subunit of DNA polymerase I, a mechanism involving two-metal ions and double Lewis-acid activation of the substrate, combined with leaving group stabilization, has been proposed. Inspired by the active site structure of this enzyme, we have designed as a synthetic phosphoryl transfer catalyst the dicopper(II) macrocyclic complex LCu(2). Crystal structures of complexes [(L)Cu(2)(mu-NO(3))(NO(3))](NO(3))(2) (1), [(L)Cu(2)(mu-CO(3))(CH(3)OH)](BF(4))(2) (2), and [(L)Cu(2)(mu-O(2)P(OCH(3))(2))(NO(3))](NO(3))(2) (3) illustrate various possibilities for the interaction of oxoanions with the dicopper(II) site. 1 efficiently promotes the transesterification of dimethyl phosphate (DMP) in CD(3)OD, k(cat) = 2 x 10(-)(4) s(-)(1) at 55 degrees C. 1 is the only available catalyst for the smooth transesterification of highly inert simple dialkyl phosphates. From photometric titrations and the pH dependence of reactivity, we conclude that a complex [(L)Cu(2)(DMP)(OCH(3))](2+) is the reactive species. Steric bulk at the -OR substituents of phosphodiester substrates O(2)P(OR)(2)(-) drastically reduces the reactivity of 1. This is explained with -OR leaving group stabilization by Cu coordination, an interaction which is sensitive to steric crowding at the alpha-C-atom of substituent R. A proposed reaction mechanism related to that of the exonuclease unit of DNA polymerase I is supported by DFT calculations on reaction intermediates. The complex [(L)Cu(3)(mu(3)-OH)(mu-CH(3)O)(2)(CH(3)CN)(2)](ClO(4))(3) (4) incorporates a [Cu(OH)(OCH(3))(2)(CH(3)CN)(2)](-) complex anion, which might be considered as an analogue of the [PO(2)(OCH(3))(2)(OCD(3))](2)(-) transition state (or intermediate) of DMP transesterification catalyzed by LCu(2).     

Synthesis and characterization of Cu(2)(I,I), Cu(2)(I,II), and Cu(2)(II,II) compounds supported by two phthalazine-based ligands: influence of a hydrophobic pocket

The copper coordination chemistry of two phthalazine-based ligands of differing steric bulk was investigated. A family of dinuclear complexes were prepared from reactions of [Cu(2)(bdptz)(MeCN)(2)](OTf)(2), 1(OTf)(2), where bdptz = 1,4-bis(2,2'-dipyridylmethyl)phthalazine. Treatment of 1(OTf)(2) with NaO(2)CCH(3) afforded the class I mixed-valent compound [Cu(2)(bdptz)(2)](OTf)(3), 2(OTf)(3), by disproportionation of Cu(I). Compound 2(OTf)(3) displays an electron paramagnetic resonance spectrum, with g( parallel ) = 2.25 (A( parallel ) = 169 G) and g( perpendicular ) = 2.06, and exhibits a reversible redox wave at -452 mV versus Cp(2)Fe(+)/Cp(2)Fe. The complex [Cu(2)(bdptz)(micro-OH)(MeCN)(2)](OTf)(3), 3(OTf)(3), was prepared by chemical oxidation of 1 with AgOTf, and exposure of 1 to dioxygen afforded [Cu(2)(bdptz)(micro-OH)(2)](2)(OTs)(4), 4(OTs)(4), which can also be obtained directly from [Cu(H(2)O)(6)](OTs)(2). In compound [Cu(2)(bdptz)(micro-vpy)](OTf)(2), 5(OTf)(2), where vpy = 2-vinylpyridine, the vpy ligand bridges the two Cu(I) centers by using both its pyridine nitrogen and the olefin as donor functionalities. The sterically hindered compounds [Cu(2)(Ph(4)bdptz)(MeCN)(2)](OTf)(2), 6(OTf)(2), and [Cu(2)(Ph(4)bdptz)(micro-O(2)CCH(3))](OTf), 7(OTf), were also synthesized, where Ph(4)bdptz = 1,4-bis[bis(6-phenyl-2-pyridyl)methyl]phthalazine. Complexes 1-7 were characterized structurally by X-ray crystallography. In 6 and 7, the four phenyl rings form a hydrophobic pocket that houses the acetonitrile and acetate ligands. Complex 6 displays two reversible redox waves with E(1/2) values of +41 and +516 mV versus Cp(2)Fe(+)/Cp(2)Fe. Analysis of oxygenated solutions of 6 by electrospray ionization mass spectrometry reveals probable aromatic hydroxylation of the Ph(4)bdptz ligand. The different chemical and electrochemical behavior of 1 versus 6 highlights the influence of a hydrophobic binding pocket on the stability and reactivity of the dicopper(I) centers.     

From simple to complex: topological evolution and luminescence variation in a copper(I) pyridylpyrazolate system tuned via second ligating spacers

By systematically varying the geometric length and electronic properties of the second ligating ligands of halogen (Cl(-), Br(-), and I(-)) and pseudohalogen (CN(-), SCN(-), and N(3)(-)) anions, we synthesized 11 isomeric/isostructural copper(I) complexes: [Cu(2)(L3-3)I](n) (1), [Cu(2)(L4-4)Br](n) (2-Br), [Cu(2)(L4-4)Cl](n) (2-Cl), [Cu(2)(L3-4)(CN)](n) (3), [Cu(2)(L3-3)(CN)](n) (4), [Cu(3)(L4-4)(CN)(2)](n) (5), {[Cu(2)(L4-4)Br](2)·CuBr}(n) (6-Br), {[Cu(2)(L4-4)Cl](2)·CuCl}(n) (6-Cl), [Cu(2)(L4-4)(SCN)](n) (7α-SCN), [Cu(2)(L4-4)(SCN)](n) (7β-SCN), and [Cu(2)(L4-4)(N(3))](n) (7α-N(3)). These structures are based on a series of isomeric pyridylpyrazole ligands, namely, 3,5-bis(3-pyridyl)-1H-pyrazole (HL3-3), 3-(3-pyridyl)-5-(4-pyridyl)-1H-pyrazole (HL3-4), and 3,5-bis(4-pyridyl)-1H-pyrazole (HL4-4), and their structural features range from 1-D (1), 2-D (2), and 3-D noninterpenetration (3), to 3-D 2-fold interpenetration (4 and 5), to 3-D self-catenation (6 and 7), exhibiting a trend from simple to complex with dimension expansion and an interpenetrating degree increase. The five most complex structures (6 and 7) with self-catenated networks are based on 2-fold interpenetrated networks linked via appropriate second ligating spacers (Cl(-), Br(-), SCN(-), and N(3)(-)), representing a strategy to construct self-catenated coordination polymers through cross-linking interpenetrated frameworks. Moreover, these complexes exhibit strong photoluminescence, which is mainly ascribed to Cu(I)-related charge transfers (MLCT, MC, and MMLCT) regulated by the electronic properties of halogen or pseudohalogen. The topological evolution and luminescence variation presented in this work open an avenue to understanding the luminescence origin and the structure-property relationship of luminescent coordination polymers.     

Dioxygen activation of a trinuclear Cu(I)Cu(I)Cu(I) cluster capable of mediating facile oxidation of organic substrates: competition between O-atom transfer and abortive intercomplex reduction

The dioxygen activation of a series of Cu(I)Cu(I)Cu(I) complexes based on the ligands (L) 3,3'-(1,4-diazepane- 1,4-diyl)bis(1-{[2-(dimethylamino)ethyl](methyl)amino}propan-2-ol)(7-Me) or 3,3'-(1,4-diazepane-1,4-diyl)bis(1-{[2-(diethylamino)ethyl](ethyl)amino}propan-2-ol)(7-Et) forms an intermediate capable of mediating facile O-atom transfer to simple organic substrates at room temperature. To elucidate the dioxygen chemistry, we have examined the reactions of 7-Me, 7-Et, and 3,3'-(1,4-diazepane-1,4-diyl)bis[1-(4-methylpiperazin-1-yl)propan-2-ol] (7-N-Meppz) with dioxygen at -80, -55, and -35?°C in propionitrile (EtCN) by UV-visible, 77?K EPR, and X-ray absorption spectroscopy, and 7-N-Meppz and 7-Me with dioxygen at room temperature in acetonitrile (MeCN) by diode array spectrophotometry. At both -80 and -55?°C, the mixing of the starting [Cu(I)Cu(I)Cu(I)(L)](1+) complex (1) with O(2)-saturated propionitrile (EtCN) led to a bright green solution consisting of two paramagnetic species: the green dioxygen adduct [Cu(II)Cu(II)(μ-η(2):η(2)-peroxo)Cu(II)(L)](2+) (2) and the blue [Cu(II)Cu(II)(μ-O)Cu(II)(L)](2+) species (3). These observations are consistent with the initial formation of [Cu(II)Cu(II)(μ-O)(2)Cu(III)(L)](1+)(4), followed by rapid abortion of this highly reactive species by intercluster electron transfer from a second molecule of complex 1 to give the blue species 3 and subsequent oxygenation of the partially oxidized [Cu(II)Cu(I)Cu(I)(L)](2+)(5) to form the green dioxygen adduct 2. Assignment of 2 to [Cu(II)Cu(II)(μ-η(2):η(2)-peroxo)Cu(II)(L)](2+) is consistent with its reactivity with water to give H(2)O(2) and the blue species 3, as well as its propensity to be photoreduced in the X-ray beam during X-ray absorption experiments at room temperature. In light of these observations, the development of an oxidation catalyst based on the tricopper system requires consideration of the following design criteria: 1)?rapid dioxygen chemistry; 2)?facile O-atom transfer from the activated cluster to substrate; and 3)?a suitable reductant to rapidly regenerate complex 1 to accomplish efficient catalytic turnover.     

Ferromagnetic coupling in a 1D coordination polymer containing a symmetric [Cu(mu1,1-N3)2Cu(mu1,1-N3)2Cu]2+ core and based on an organic ligand obtained from the solid state

Addition of rctt-tetrakis(2-pyridyl)cyclobutane (2,2'-tpcb) in a Cu(II)/N(3)- solution afforded the 1D coordination polymer [Cu(3)(N(3))(6)(2,2'-tpcb)(DMF)(2)](n) (1). The ligand 2,2'-tpcb serves as a tetradentate bis-chelating ligand by linking linear [(DMF)Cu(mu(1,1)-N(3))(2)Cu(N(3))(2)(mu(1,1)-N(3))(2)Cu(DMF)] trinuclear units to produce a zigzag chain. Within each centrosymmetric trinuclear unit there exist two irregularly asymmetric end-on double azido-bridged [Cu(mu(1,1)-N(3))(2)Cu](2+) cores, while one of the largest Cu-Nazide-Cu angles is observed. Magnetic susceptibility data, measured from 2 to 300 K, show bulk moderate ferromagnetic coupling within the magnetically isolated trinuclear units. These data were fitted to the appropriate equation derived from the Hamiltonian H = -J(1)(S(A1)S(B) + S(A2)S(B)) - J(2)S(A1)S(A2), giving the parameters J1 = +70(3) cm(-1), J2 = -3(2) cm(-1), g = 2.12(1), with an intertrimer interaction parameter theta = -0.74(2) K. The coupling constants were correlated with the structural parameters. Density functional calculations reproduce very well the experimental J values and show that ferromagnetism for this complex is mainly due to the topology of the magnetic orbitals and the different coordination spheres of two neighboring Cu(II) atoms, resulting in a small overlap of the orbitals possessing the unpaired electrons.     

Crystal-to-crystal transformations in heterometallic yttrium(III)-copper(I) iodide derivatives in a confined solvent-free environment: influence of solvated yttrium cations on the nuclearity and dimensionality of iodocuprate clusters

The solvated yttrium iodide precursors [Y(L)(8)]I(3) (L = DMSO or DMF), prepared in situ by stirring YI(3)(Pr(i)OH)(4) in DMSO or DMF, react with CuI in the presence of NH(4)I to give ionic hetero-metallic species [Y(DMSO)(8)][Cu(2)(mu-I)I(4)] (1) and [Y(DMF)(8)][Cu(4)(mu(3)-I)(2)(mu-I)(3)I(2)] (2) in excellent yields. Re-crystallization of 1 from DMF afforded the mixed-solvate complex [Y(DMSO)(6)(DMF)(2)][CuI(3)][I] (3). Compounds 2 and 3 undergo unique crystal-to-crystal transformation via progressive substitution of DMF by water molecules in a confined, solvent-free environment. Thus, crystals of 3 transform into [Y(DMSO)(6)(H(2)O)(2)][CuI(3)][I] (4), whereas a discrete ion-pair assembly of 2 is first converted into a 1-D zig-zag structure [Y(DMF)(6)(H(2)O)(2)](3+)[Cu(7)(mu(4)-I)(3)(mu(3)-I)(2)(mu-I)(4)(I)](1infinity)(3-) (5) and finally into a 2-D sheet containing mixed-valent copper atoms, [Y(DMF)(6)(H(2)O)(3)](3+)[Cu(I)(7)Cu(II)(2)(mu(3)-I)(8)(mu-I)(6)](2infinity)(3-) (6). The bi- and tetrafurcate H-bonding between water ligands on yttrium and iodides of the Cu-I cluster plays a pivotal role in the evolution of structures 4-6. Formation of a wide range of iodocuprate structures in 1-6, from discrete mono-, di- or tetranuclear units to one- and two-dimensional extended arrays, reflects the influence of solvated yttrium cations on the nuclearity and dimensionality of Cu-I clusters. TG-DTA-MS studies and DFT calculations for these complexes have also been carried out in order to determine their thermal stability and have insight about aforesaid transformations.     

Protonation reactions of dinuclear pyrazolato iridium(I) complexes

The complex [[Ir(mu-Pz)(CNBu(t))(2)](2)] (1) undergoes double protonation reactions with HCl and with HO(2)CCF(3) to give the neutral dihydride complexes [[Ir(mu-Pz)(H)(X)(CNBu(t))(2)](2)] (X = Cl, eta(1)-O(2)CCF(3)), in which the hydride ligands were located trans to the X groups and in the boat of the complexes, both in the solid state and in solution. The complex [[Ir(mu-Pz)(H)(Cl)(CNBu(t))(2)](2)] evolves in solution to the cationic complex [[Ir(mu-Pz)(H)(CNBu(t))(2)](2)(mu-Cl)]Cl. Removal of the anionic chloride by reaction with methyltriflate allows the isolation of the triflate salt [[Ir(mu-Pz)(H)(CNBu(t))(2)](2)(mu-Cl)]OTf. This complex undergoes a metathesis reaction of hydride by chloride in CDCl(3) under exposure to the direct sunlight to give the complex [[Ir(mu-Pz)(Cl)(CNBu(t))(2)](2)(mu-Cl)]OTf. Protonation of both metal centers in [[Ir(mu-Pz)(CO)(2)](2)] with HCl occurs at low temperature, but eventually the mononuclear compound [IrCl(HPz)(CO)(2)] is isolated. The related complex [[Ir(mu-Pz)(CO)(P[OPh](3))](2)] reacts with HCl and with HO(2)CCF(3) to give the neutral Ir(III)/Ir(III) complexes [[Ir(mu-Pz)(H)(X)(CO)(P[OPh](3))](2)], respectively. Both reactions were found to take place stepwise, allowing the isolation of the intermediate monohydrides. They are of different natures, i.e., the metal-metal-bonded Ir(II)/Ir(II) compound [(P[OPh](3))(CO)(Cl)Ir(mu-Pz)(2)Ir(H)(CO)(P[OPh](3))] and the mixed-valence Ir(I)/Ir(III) complex [(P[OPh](3))(CO)Ir(mu-Pz)(2)Ir(H)(eta(1)-O(2)CCF(3))(CO)(P[OPh](3))].     

Group 11 complexes with the bis(3,5-dimethylpyrazol-1-yl)methane ligand. How secondary bonds can influence the coordination environment of Ag(I): the role of coordinated water in [Ag2(mu-L)2(OH2)2](OTf)2

The complexation properties of the ligand bis(3,5-dimethylpyrazol-1-yl)methane (L) towards group 11 metals have been studied. The reaction in a 1 : 1 molar ratio with [Cu(NCMe)4]PF6 or Ag(OTf) complexes gives the mononuclear [CuL(NCMe)]PF6 (1), with crystallographic mirror symmetry, or dinuclear [Ag2(mu-L)2](OTf)2 (2) (OTf = trifluoromethanesulfonate) in which the ligand bridges both silver centres, an unprecedented mode of coordination for this type of ligands. Compound 2 crystallizes with two water molecules and forms a supramolecular structure through classical hydrogen bonding. The reaction in a 2 : 1 ratio affords in both cases the four-coordinated derivatives [ML2]X (M = Cu, X = PF6 (3); Ag, X = OTf 4). The treatment of [Ag(OTf)(PPh3)] with the ligand L gives [AgL(PPh3)]OTf (5). The gold(I) derivative [Au2(C6F5)2(mu-L)] (6) has also been obtained by reaction of L with two equivalents of [Au(C6F5)(tht)]. These complexes present a luminescent behaviour at low temperature; the emissions being mainly intraligand but enhanced after coordination of the metal. Compounds 1-4 have been characterized by X-ray crystallography. DFT studies showed that, in the silver complex 2, coordination of H2O to Ag in the binuclear complex is favoured by formation of a hydrogen-bonding network, involving the triflato anion, and releasing enough energy to allow distortion of the Ag2 framework.     

From discrete [Y(DMF)8][Cu4(mu3-I)2(mu-I)3I2] ion pairs to extended [Y(DMF)6(H2O)2][Cu7(mu4-I)3(mu3-I)2(mu-I)4(I)]1infinity and [Y(DMF)6(H2O)3][Cu(I)7Cu(II)2(mu3-I)8(mu-I)6]2infinity arrays by H-bond templating in a confined solvent-free environment

An ionic heterometallic species [Y(DMF)(8)][Cu(4)(micro(3)-I)(2)(micro-I)(3)I(2)](1) was isolated from a solution of CuI, NH(4)I and YI(3)(Pr(i)OH)(4) in DMF-isopropoxyethanol, and was converted in a confined environment by progressive substitution of the DMF ligands with water molecules first into a 1D zig-zag structure [Y(DMF)(6)(H(2)O)(2)][Cu(7)(micro(4)-I)(3)(micro(3)-I)(2)(micro-I)(4)(I)](1infinity)(2) and finally into a 2D sheet [Y(DMF)(6)(H(2)O)(3)][Cu(I)(7)Cu(II)(2)(micro(3)-I)(8)(micro-I)(6)](2infinity)(3) by H-bond templating.     

Synthesis, structures and reactivity of ruthenium nitrosyl complexes containing Kläui's oxygen tripodal ligand

Ruthenium nitrosyl complexes containing the Kl?ui's oxgyen tripodal ligand L(OEt)(-) ([CpCo{P(O)(OEt)(2)}(3)](-) where Cp = η(5)-C(5)H(5)) were synthesized and their photolysis studied. The treatment of [Ru(N^N)(NO)Cl(3)] with [AgL(OEt)] and Ag(OTf) afforded [L(OEt)Ru(N^N)(NO)][OTf](2) where N^N = 4,4'-di-tert-butyl-2,2'-bipyridyl (dtbpy) (2·[OTf](2)), 2,2'-bipyridyl (bpy) (3·[OTf](2)), N,N,N'N'-tetramethylethylenediamine (4·[OTf](2)). Anion metathesis of 3·[OTf](2) with HPF(6) and HBF(4) gave 3·[PF(6)](2) and 3·[BF(4)](2), respectively. Similarly, the PF(6)(-) salt 4·[PF(6)](2) was prepared by the reaction of 4·[OTf](2) with HPF(6). The irradiation of [L(OEt)Ru(NO)Cl(2)] (1) with UV light in CH(2)Cl(2)-MeCN and tetrahydrofuran (thf)-H(2)O afforded [L(OEt)RuCl(2)(MeCN)] (5) and the chloro-bridged dimer [L(OEt)RuCl](2)(μ-Cl)(2) (6), respectively. The photolysis of complex [2][OTf](2) in MeCN gave [L(OEt)Ru(dtbpy)(MeCN)][OTf](2) (7). Refluxing complex 5 with RNH(2) in thf gave [L(OEt)RuCl(2)(NH(2)R)] (R = tBu (8), p-tol (9), Ph (10)). The oxidation of complex 6 with PhICl(2) gave [L(OEt)RuCl(3)] (11), whereas the reduction of complex 6 with Zn and NH(4)PF(6) in MeCN yielded [L(OEt)Ru(MeCN)(3)][PF(6)] (12). The reaction of 3·[BF(4)](2) with benzylamine afforded the μ-dinitrogen complex [{L(OEt)Ru(bpy)}(2)(μ-N(2))][BF(4)](2) (13) that was oxidized by [Cp(2)Fe]PF(6) to a mixed valence Ru(II,III) species. The formal potentials of the RuL(OEt) complexes have been determined by cyclic voltammetry. The structures of complexes 5,6,10,11 and 13 have been established by X-ray crystallography.     

First example of a 2:1 cocrystal of mixed Cu(I)/Cu(II) complexes and a novel ferromagnetic bis(mu-hydroxo)dicopper(II) complex with a bis(pyrazol-1-yl)methane bidentate ligand

A unique 2:1 cocrystal of mixed Cu(I)/Cu(II) complexes [Cu(I)(H2CPz2)(MeCN)2](ClO4) (1) and [Cu(II)(H2CPz2)2(ClO4)2] (4), a novel ferromagnetic ClO(4-)-bridged bis(mu-hydroxo)dicopper(II) complex, [Cu2(H2CPz2)2(OH)2(ClO4)](ClO4)(CH3CN)(0.5) (5), and a bischelated copper(I) complex, [Cu(H2CPz2)2](ClO4) (2), prepared from a one-pot reaction of [Cu(MeCN)4](ClO4) and H2CPz2, are described. The structures of these complexes have been determined by X-ray crystallographic methods. The Cu(I)-N(acetonitrile) bond distances in complex 1 are nonequivalent (1.907(8) and 2.034(9) A), leading to the dissociation of one MeCN to form a Y-shaped complex, [Cu(I)(H2CPz2)(MeCN)](ClO4) (3), which is oxidized readily in air to form complex 5 with a butterfly Cu2O2 core.     

Synthesis, structures and photophysical properties of luminescent copper(I) and platinum(II) complexes with a flexible naphthyridine-phosphine ligand

Condensation of Ph(2)PH and paraformaldehyde with 2-amino-7-methyl-1,8-naphthyridine gave the new flexible tridentate ligand 2-[N-(diphenylphosphino)methyl]amino-7-methyl-1,8-naphthyridine (L). Reaction of L with [Cu(CH(3)CN)(4)]BF(4) and/or different ancillary ligands in dichloromethane afforded N,P chelating or bridging luminescent complexes [(L)(2)Cu(2)](BF(4))(2), [(micro-L)(2)Cu(2)(PPh(3))(2)](BF(4))(2) and [(L)Cu(CNN)]BF(4) (CNN = 6-phenyl-2,2'-bipyridine), respectively. Complexes [(L)(2)Pt]Cl(2), [(L)(2)Pt](ClO(4))(2) and [(L)Pt(CNC)]Cl (CNC = 2,6-biphenylpyridine) were obtained from the reactions of Pt(SMe(2))(2)Cl(2) or (CNC)Pt(DMSO)Cl with L. The crystal structures and photophysical properties of the complexes are presented.     

High-nuclearity metal-cyanide clusters: synthesis,magnetic properties,and inclusion behavior of open-cage species incorporating [(tach)M(CN)3] (M = Cr,Fe, Co) complexes

The use of 1,3,5-triaminocyclohexane (tach) as a capping ligand in generating metal-cyanide cage clusters with accessible cavities is demonstrated. The precursor complexes [(tach)M(CN)(3)] (M = Cr, Fe, Co) are synthesized by methods similar to those employed in preparing the analogous 1,4,7-triazacyclononane (tacn) complexes. Along with [(tach)Fe(CN)(3)](1)(-), the latter two species are found to adopt low-spin electron configurations. Assembly reactions between [(tach)M(CN)(3)] (M = Fe, Co) and [M'(H(2)O)(6)](2+) (M' = Ni, Co) in aqueous solution afford the clusters [(tach)(4)(H(2)O)(12)Ni(4)Co(4)(CN)(12)](8+), [(tach)(4)(H(2)O)(12)Co(8)(CN)(12)](8+), and [(tach)(4)(H(2)O)(12)Ni(4)Fe(4)(CN)(12)](8+), each possessing a cubic arrangement of eight metal ions linked through edge-spanning cyanide bridges. This geometry is stabilized by hydrogen-bonding interactions between tach and water ligands through an intervening solvate water molecule or bromide counteranion. The magnetic behavior of the Ni(4)Fe(4) cluster indicates weak ferromagnetic coupling (J = 5.5 cm(-)(1)) between the Ni(II) and Fe(III) centers, leading to an S = 6 ground state. Solutions containing [(tach)Fe(CN)(3)] and a large excess of [Ni(H(2)O)(6)](2+) instead yield a trigonal pyramidal [(tach)(H(2)O)(15)Ni(3)Fe(CN)(3)](6+) cluster, in which even weaker ferromagnetic coupling (J = 1.2 cm(-)(1)) gives rise to an S = (7)/(2) ground state. Paralleling reactions previously performed with [(Me(3)tacn)Cr(CN)(3)], [(tach)Cr(CN)(3)] reacts with [Ni(H(2)O)(6)](2+) in aqueous solution to produce [(tach)(8)Cr(8)Ni(6)(CN)(24)](12+), featuring a structure based on a cube of Cr(III) ions with each face centered by a square planar [Ni(CN)(4)](2)(-) unit. The metal-cyanide cage differs somewhat from that of the analogous Me(3)tacn-ligated cluster, however, in that it is distorted via compression along a body diagonal of the cube. Additionally, the compact tach capping ligands do not hinder access to the sizable interior cavity of the molecule, permitting host-guest chemistry. Mass spectrometry experiments indicate a 1:1 association of the intact cluster with tetrahydrofuran (THF) in aqueous solution, and a crystal structure shows the THF molecule to be suspended in the middle of the cluster cavity. Addition of THF to an aqueous solution containing [(tach)Co(CN)(3)] and [Cu(H(2)O)(6)](2+) templates the formation of a closely related cluster, [(tach)(8)(H(2)O)(6)Cu(6)Co(8)(CN)(24) superset THF](12+), in which paramagnetic Cu(II) ions with square pyramidal coordination are situated on the face-centering sites. Reactions intended to produce the cubic [(tach)(4)(H(2)O)(12)Co(8)(CN)(12)](8+) cluster frequently led to an isomeric two-dimensional framework, [(tach)(H(2)O)(3)Co(2)(CN)(3)](2+), exhibiting mer rather than fac stereochemistry at the [Co(H(2)O)(3)](2+) subunits. Attempts to assemble larger edge-bridged cubic clusters by reacting [(tach)Cr(CN)(3)] with [Ni(cyclam)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) complexes instead generated extended one- or two-dimensional solids. The magnetic properties of one of these solids, two-dimensional [(tach)(2)(cyclam)(3)Ni(3)Cr(2)(CN)(6)]I(2), suggest metamagnetic behavior, with ferromagnetic intralayer coupling and weak antiferromagnetic interactions between layers.     

Control of copper(I) iodide architectures by ligand design: angular versus linear bridging ligands

A family of coordination polymers formed by the reaction of copper(I) iodide with a range of angular bidentate or tridentate N-donor ligands is reported. The framework polymers [CuI(dpt)](infinity) 1 [dpt = 2,4-bis(4-pyridyl)-1,3,5-triazine], [CuI(dpb)](infinity) 2 [dpb = 1,4-bis-(4-pyridyl)-benzene], [(CuI)3(dpypy)2](infinity) 3, [CuI(dpypy)](infinity) 4 [dpypy = 3,5-bis(4-pyridyl)-pyridine], and [Cu3I3(pypm)](infinity) 5 [pypm = 5-(4-pyridyl)pyrimidine] have been prepared and structurally characterized. It was found that the angular nature of the dpypy and dpt ligands favors the formation of discrete (CuI)2 dimeric subunits as observed in [CuI(dpt).MeCN](infinity) 1 and [(CuI)3(dpypy)2](infinity) 3. In contrast, reaction with the linear ligand dpb affords [CuI(dpb)](infinity) 2 which incorporates a one-dimensional (CuI)(infinity) chain structure. Moreover, the additional donor available on the central ring of the dpypy ligand generates a novel two-dimensional bilayer structure in 3, in contrast to the one-dimensional ribbon structure observed in the case of 1. Interestingly, the bilayer structure of 3 additionally exhibits 2-fold interpenetration. The reaction of CuI with dpypy produces not only 3 but a further product [CuI(dpypy)](infinity) 4 that has been characterized as a one-dimensional chain constructed from trigonal-planar Cu(I) centers bridged by bidentate dpypy ligands. Compound 5, [Cu3I3(pypm)](infinity), exhibits a highly unusual three-dimensional structure in which the pypm ligand bridges two-dimensional brick-wall (CuI)(infinity) sheets.     

Bis(diamino-diamido)-tetrathiafulvalene, a redox active sensor for proton, anions, and cations

A bis(diamino-diamido) tetrathiafulvalene (TTF) derivative H(4)L(2) has been designed and synthesized. Experiments of pH titration reveal that integrating the redox active TTF unit with the diamino-diamido moiety adds new properties to the traditional ligand. Oxidation of the TTF moiety increases the acidity of the amido group, and the coordination of metal ions is also sensitive to the oxidation state of the ligand. This compound is capable of acting as a leaving or accepting ligand for proton and metal ions. The electrochemistry of the protonated TTF derivative of H(4)L(2) was studied in the presence of a series of oxo anions and metal cations. The results indicate that the redox potentials selectively respond to HC(2)O(4)(-) and SO(4)(2-) anions, and Ni(II) and Cu(II) cations. Solid-state structures of a cation-anion salt H(8)L(2)·2SO(4)·8H(2)O and a nickel coordination compound [Ni(2)L(2)]·2DMF have been characterized by means of X-ray crystallography which are helpful in understanding the inter-ion interactions.     

Self-assembly of transition-metal-based macrocycles linked by photoisomerizable ligands: examples of photoinduced conversion of tetranuclear-dinuclear squares

A series of hetero- and homometallic square complexes bridged by a photoactive 4,4'-azopyridine (AZP) or 1,2-bis(4-pyridyl)ethylene (BPE) ligand, cyclobis[[cis-(dppf)M](mu-L)(2)(fac-Re(CO)(3)Br)](OTf)(4) (M = Pd, L = trans-AZP (5); M = Pt, L = trans-AZP (7); M = Pd, L = trans-BPE (8); M = Pt, L = trans-BPE (10)), cyclo[[cis-(dppf)M](mu-L)(2)(fac-Re(CO)(3)Br)](OTf)(2) (M = Pd, L = cis-AZP (6); M = Pd, L = cis-BPE (9)), [cis-(dppf)Pd(mu-trans-AZP)](4)(OTf)(8) (11), and [cis-(dppf)Pd(mu-cis-AZP)](2)(OTf)(4) (12), where dppf is 1,1'-bis(diphenylphosphino)ferrocene and OTf is trifluoromethanesulfonate anion, were prepared by thermodynamically driven self-assembly processes. The photophysical and photochemical properties of these complexes have been investigated, and all of them show a lack of luminescence in room temperature solution. Upon irradiation at 313 or 366 nm, Pd(II)-Re(I)-containing tetranuclear squares 5, 8, and 11 undergo photoisomerization and convert to their corresponding dinuclear complexes 6, 9, and 12, whereas Pt(II)-Re(I)-based squares 7 and 10 show only slow square disassembling processes. The tetranuclear squares can be fully recovered by heating the photoisomerized solution for several hours.