The free-radical reaction of tri-n-butyltin hydride with disulfides

The kinetics and absolute rate constants for the free-radical chain reaction of tri-n-butyltin hydride with di-t-butyl disulfide have been measured in cyclohexane at 30°. The rate controlling step for chain propagation involves the cleavage of the disulfide bond by an attacking tributyltin radical. The rate constant for this bimolecular homolytic substitution at sulfur is ～8 × 10⁴ Mole^?1 sec^?1. Chain termination involves the self-reaction of two tributyltin radicals. The rate constants for attack of tributyltin radicals on some other disulfides and on elemental sulfur have also been measured. The results are compared with literature data for homolytic substitutions on these compounds by a variety of radicals which have their unpaired electron centered on carbon.     

Study and Application on Polarographic Catalytic Wave of Human Serum Albumin in the Presence of Kio3

ABSTRACT

A polarographic catalytic wave of human serum albumin (HSA) in the presence of KIO³ was reported. In 0.1 M NaAc～HAc buffer (pH4.7) solution, a reduction wave of HSA with peak potential ?0.60 V (vs., Ag/AgCl) resulted from the reduction of five disulfide linkages to sulfhydryl group. In the presence of KIO³, HSA yielded a polarographic catalytic wave at the original potential due to reduction and regeneration of these disulfide linkages. The catalytic wave can be used to determine trace of HSA. In the 0.1 M HAc～NaAc (pH4.7±0.2) ～1×10^?3 M KIO³ solution, the peak current was linearly proportional to HSA concentration in the range of 1.5×10^?7～7.5×10^?7 M. The catalytic wave improved two orders of magnitude in sensitivity compared with corresponding reduction wave.     

含硅二烃基锡(Ⅳ)水杨醛缩氨基硫脲席夫碱配合物的合成、结构及抗癌活性

合成了11个含硅二烃基锡的水杨醛缩氨基硫脲席夫碱配合物R(Me3SiCH2)SnL(R=Me3SiCH2或Ph,Cy;H2L=水杨醛缩氨基硫脲席夫碱),并通过1H NMR、13C NMR、IR、元素分析和X射线单晶衍射对目标化合物结构进行了表征。结果表明,水杨醛缩氨基硫脲席夫碱作为三齿双阴离子配体,通过酚氧、亚胺氮和硫醇硫与锡(Ⅳ)配位,形成了中心锡原子为五配位的五元杂环与六元杂环的并联结构。生物活性试验的初步结果显示,该类化合物对人体乳腺癌细胞MDA-MB-231和MCF-7具有较好的体外抗癌活性。     

Solid-phase microextraction—Gas chromatography to determine volatile organic sulfur compounds in the air at sewage treatment plants

Solid-phase microextraction (SPME) was applied to the determination of 7 volatile organic sulfur compounds (VOSCs), which were analysed by gas chromatography-mass spectrometry. The compounds studied were ethyl mercaptan (CH₃CH₂SH), dimethyl sulfide ((CH₃)₂S), carbon disulfide (CS₂), propyl mercaptan (C₃H₈S), butyl mercaptan (C₄H₁₀S), dimethyl disulfide ((CH₃)₂S₂) and 1-pentanethiol (C₅H₁₂S). Temperature and time conditions of SPME extraction were optimised and the method was validated, with good linearity in a calibration range between 0.1 and 1000 μg m⁻³. Method detection limits ranged between 0.01 and 0.08 μg m⁻³ and method quantification limits were between 0.10 and 0.25 μg m⁻³, allowing real samples taken from several different areas of a sewage treatment plant to be analysed. Repeatability of the method between samples went from 5.6% for pentanethiol up to 14.2% for carbon disulfide, and concentrations of total target compounds were found between 18 and 529 μg m⁻³, depending on the sampling site.     

Thermal analysis of sulfurization of polyacrylonitrile with elemental sulfur

Thermal analysis of sulfurization of polyacrylonitrile (PAN) with elemental sulfur was investigated by thermogravimetry and differential thermal analysis of the mixture of polyacrylonitrile and elemental sulfur up to 600°C. Due to the volatilization of sulfur, the different heating rate (10 and 20 K min⁻¹) and different mixture proportion of polyacrylonitrile and elemental sulfur were adopted to run the analysis. The different heating rates make the DSC curves of sulfur different, but make the DSC curves of PAN similar. In the DSC curve of sulfur for the heating rate of 20 K min⁻¹ around 400°C, a small exothermic peak occurs at 400°C in the wide endothermic peak around 380∼420°C, indicative of that there is an exothermic reaction around 400°C. In the DSC curves of the mixture, the peaks around 320°C are exothermic as the content of sulfur is below 3.5:1 and endothermic as the content of sulfur is over 4:1, indicating that one of the reactions between PAN and sulfur takes place around 320°C. In the TG curves of the mixture, the mass losses begin at 220°C, and sharply drop down from 280°C. The curves for the low sulfur content obviously show two steps of mass loss, and curves for the high sulfur content show only one step of mass loss, indicative of more sulfur is benefit for the complete sulfurization of PAN. This study demonstrates that the TG/DSC analysis can give the parameter for the sulfurization, even if the starting mixture contains the volatile sulfur.     

Contribution à l'électrochimie des thiols et disulfures : Partie IV. Polarographies d.c., a.c. et impulsionnelle différentielle de la cystéamine et de la cystamine

The electrochemical behaviour of the cysteamine—cystamine system was investigated by the d.c.a.c. and d.p.p. techniques, as functions of concentration and pH. Adsorption phenomens were observed, and the cystéamine anodic and the cystamine cathodic waves were found to be diffusion-controlled. Separation of these two sulfur amino acids was achieved; 6 mg l^-1 of cysteamine HCl can be determined in the presence of 11 mg l^-1 of cystamine dihydrochloride. Detection limits are 5 ·1O^-7 M for cysteamine and 1 · 10^-6M for cystamine; as little as 0.012 mg of the thiol and 0.23 mg of the disulfide per litre can be determined. The polarographic behaviour of the cystamine—cysteamine system resembles that described previously for the cysteine— cystine system.     

Rate constants for quenching of O2(1Δg) with sulfur compounds

The rate constants for the quenching of O₂(¹Δ_g) with carbon disulfide, dimethyl sulfide, dimethyl disulfide, diallyl disulfide, ethyl mercaptan, and thiophene have been determined in a discharge flow system in the absence of oxygen atoms. The rate constants are found to be (6.5 ± 0.6) × 10⁴, (1.8 ± 0.2) × 10⁴, and (3.5 ± 0.6) × 10³ L/mol · s for dimethyl sulfide, ethyl mercaptan, and thiophene, respectively. The other compounds have rate constants <9.9 × 10² L/mol · s. In the case of dimethyl sulfide, even when NO₂ concentration is more than what is required to remove oxygen atoms completely, the rate constants are found to vary with different amounts of NO₂. No correlation is found to exist between the logarithm of the rate constants and the ionization potentials of the compounds.     

Polarographic Determination of Aztreonam

Abstract

The polarographic behaviour of Aztreonam is studied. In acid media, at pH values lower than 6, in differential pulse polarography a peak is observed at a potential close to ? 0.6 volts. The optimum conditions for the polarographic signal are established and the different parameters affecting the electrochemical process are studied. The relationship between peak intensity and the concentration of Aztreonam is linear for concentrations lower than 1.0 ? 10^?5 M, the detection limit being 1.4 × 10^?8 M It was observed that the presence of 1-arginine does not affect the polarographic signal of Aztreonam to any significant extent.     

Effects of polysulfides on the polymerization of methyl methacrylate

The effect of organic sulfur compounds on the radical polymerization of methyl methacrylate initiated by azobisisobutyronitrile at 50°C. has been studied. The sulfur compounds used were benzene-type polysulfides (C₆H₅CH₂? S_n? CH₂C₆H₅; n = 0–4), benzyl mercaptan, and sulfur (S₈). All sulfur compounds studied, except dibenzyl, dibenzyl monosulfide, and dibenzyl disulfide, were found to behave as retarders under these experimental conditions. Chain-transfer constants of these compounds were determined from rate measurements and from the conventional method based on numberaverage degree of polymerization. Chain-transfer constants of benzyl-type polysulfides were less than those of mercaptan and sulfur and increased with increasing sulfur. The correlation of the reactivities of sulfur compounds as transfer agents and their molecular structures is discussed.     

Sulfurization of polymers

Polydiethylsiloxane reacts with elemental sulfur at 300–320 °C (ZnCl₂ slightly accelerates the process) with evolution of hydrogen sulfide and formation of black lustrous paramagnetic powders (sulfur content up to 38.50%), which possess a noticeable electric conductivity (3.20·10⁻⁷ S cm⁻¹ when doped with I₂) and redox properties. Polydimethylsiloxanes are stable under the same conditions. In rechargeable lithium batteries, the sulfurized polydiethylsiloxane behaves as an active cathode material allowing charging and discharging of the battery. The specific capacities of the cathodic and anodic processes (80–100 (mA h) g⁻¹) change insignificantly. The hydrolytic stability, elemental analysis, IR and ESR spectra, DSC-TGA and derivatographic analyses data, the electric conductivity, and the character of the electrochemical activity of the polymers synthesized indicate that the polymers contain the polyvinylene disulfide blocks cross-linked by the polysiloxane chain.     

Electrochemical Synthesis of Organic Polysulfides from Disulfides by Sulfur Insertion from S8 and an Unexpected Solvent Effect on the Product Distribution

An electrochemical synthesis of organic polysulfides through sulfur insertion from elemental sulfur to disulfides or thiols is introduced. The highly economic, low-sensitive and low-priced reaction gives a mixture of polysulfides, whose distribution can be influenced by the addition of different amounts of carbon disulfide as co-solvent. To describe the variable distribution function of the polysulfides, a novel parameter, the “absorbance average s ulfur a mount in p olysulfides” (SAP) was introduced and defined on the basis of the “number average molar mass” used in polymer chemistry. Various organic polysulfides were synthesized with variable volume fractions of carbon disulfide, and the yield of each polysulfide was determined by quantitative ¹³C NMR. Moreover, by using two symmetrical disulfides or a disulfide and a thiol as starting materials, a mixture of symmetrical and asymmetrical polysulfides could be obtained.     

Differential-pulse polarography of amino acids in acetaldehyde-borax medium

A differential-pulse polarographic method for the determination of amino acids is reported, based on the formation of Schiff's base compounds in borax buffer solution (pH 10.10) containing acetaldehyde. The compounds are reduced at a mercury electrode with peak potentials of about ?1.5 V (vs. SCE) and well defined polarographic waves are obtained which can be used to determine amino acids in borax medium. The differential-pulse polarographic method was found to be the most sensitive and suitable for the determination of amino acids in the concentration range 1 × 10^?6–8 × 10^?4 M (lysine) and 2.8 × 10^?6–1 × 10^?3 M (arginine). The polarographic characteristics of these waves were studied by differential-pulse polarographic and cyclic voltammetric methods. The waves are ascribed to the reduction of the imido group in the Schiff's base compounds. The procedure was applied to the determination of lysine and arginine in foodstuffs and the total proteins in serum samples.     

固体碱对油品中有机硫化物的脱除性能及分析

预碱洗（电精制）是轻质油品精制中的重要环节，通过氢氧化钠水溶液预碱洗可除去油品中的硫化氢、低分子硫醇等酸性物质，但大量含硫废碱液的排放给环保造成很大压力。以固体碱代替液体碱预碱洗，是减少甚至消除废碱液产生和排放的最有效措施。近十几年来，许多学者致力于固体碱对轻质油品中硫醇、硫化氢的脱除研究。     

Determination of elemental sulfur in jet fuel by differential pulse polarography

A sensitive method based on differential pulse polarography is described for the determination of elemental sulfur in jet fuels. Its sensitivity makes it suitable for following small changes in the sulfur content of jet fuel during storage. The supporting electrolyte is 0.19 M ammonium acetate/0.088 M acetic acid in 1:1 toluene/methanol. In this medium, the peak potential is ?0.56 V vs. Ag/AgCl. Calibration is linear from 2 to 30 mg l^?1. The limit of detection is 0.1 mg l^?1. Accuracy is better than 5%. Interferences from oxygen, hydrogen sulfide, thiols, organic sulfides and disulfides, organic peroxides and fuel additives are shown to be of very minor significance.     

Spectrophotometric determination of sulfhydryl concentration on the surface of thiol-modified chromatographic silica particles using 2,2′-dipyridyl disulfide reagent

This article describes a straightforward method for the quantification of thiol groups on the surface of chromatographic particles such as 3-mercaptopropyl silica gel. The method is based on a thiol-disulfide exchange reaction with 2,2′-dipyridyl disulfide (DPDS) reagent and spectrophotometric or HPLC-UV determination of the liberated 2-pyridyl thione. Linearity was obtained over the sulfhydryl concentration range of 0.02-0.5 μmol ml⁻¹ for the spectrophotometric determination and 0.2-5 μmol ml⁻¹ for the HPLC-UV measurement, with r² values of 0.9975 and 0.9981, respectively. The results were validated using elemental analysis as independent control method. The agreement between the results of both methods indicates that the sulfur of the thiol-modified silica particles is available as reactive sulfhydryls. The repeatability study indicated a higher precision for the DPDS method compared to the elemental analysis.     

催化裂化汽油中类型硫含量分布

利用催化裂化汽油中各类硫化物的系统分析方法,对催化裂化(FCC)汽油和重油催化裂化(RFCC)汽油中各类型硫进行了分析测定,碱洗后FCC汽油和RFCC汽油中类型硫的布规律为:硫醇硫和二硫化物硫的含量较少,硫醚硫含量中等,而噻吩类硫的含量最多,占总硫含量的60%以上.     

Formation and characterization of Cu<Subscript>x</Subscript>S layers on polyethylene film using the solutions of sulfur in carbon disulfide

Results of the formation of copper sulfide layers using the solutions of elemental sulfur in carbon disulfide as precursor for sulfurization are presented. Low density polyethylene film can be effectively sulfurized in the solutions of rhombic (α) sulfur in carbon disulfide. The concentration of sulfur in polyethylene increases with the increase of the temperature and concentration of sulfur solution in carbon disulfide and it little depends on the duration of sulfurization. Electrically conductive copper sulfide layers on polyethylene film were formed when sulfurized polyethylene was treated with the solution of copper (II/I) salts. Cu_xS layer with the lowest sheet resistance (11.2 Ω cm⁻²) was formed when sulfurized polyethylene was treated with copper salts solution at 80°C. All samples with formed Cu_xS layers were characterized by X-ray photoelectron spectroscopy. XPS analysis of obtained layers showed that on the layer’s surface and in the etched surface various compounds of copper, sulfur and oxygen are present: Cu₂S, CuS, CuO, S₈, CuSO₄, Cu(OH)₂ and water. The biggest amounts of CuSO₄ and Cu(OH)₂ are present on the layer’s surface. Significantly more copper sulfides are found in the etched layers.     

REACTION OF α-CHLOROTOLUENE WITH ELEMENTAL SULFUR IN LIQUID AMMONIA

Abstract

α-Chlorotoluene (1) reacts with elemental sulfur in liquid ammonia affording dibenzyl disulfide (2), dibenzyl trisulfide (3), dibenzyl tetrasulfide (4), dibenzyl pentasulfide (5) and benzylidene benzylimide (6) at a low temperature such as 20°C. This reaction is presumed to be initiated by the nucleophilic attack of ammonium thioaminohydroxylate, “H₂NS^-NH₄ ⁺,” or dithioaminohydroxylate, “H₂NSS^-NH₄,” formed upon treating elemental sulfur in liquid ammonia, on α-chlorotoluene (1). Benzylidene benzylimide (6) is presumed to be formed from benzylamine, which can be formed by treatment of α-chlorotoluene (1) with ammonia.     

Conversion of hydrogen sulfide to elemental sulfur byChlorobium thiosulfatophilum in a CSTR with a sulfur-settling separator

Chlorobium thiosulfatophilum may be used for the bioconversion of hydrogen sulfide to elemental sulfur or sulfate. Sulfur is the preferred product because of problems in the disposal of sulfate. A CSTR with a sulfur-settling separator has been used to preferentially produce and recover elemental sulfur. The simple nutritional requirements of the bacterium and differences in densities and average cell and sulfur particle sizes make a CSTR with a sulfur-settling separator attractive. A bench-scale study has been carried out to determine the optimum process conditions to maximize H₂S conversion, cell growth, elemental sulfur production, and to minimize sulfate production. The liquid effluent typically contained about 425–550 mg/L elemental sulfur. The sulfate concentration was maintained at levels below 100 mg/L. It was possible to remove up to 57 Μmol min⁻¹ L⁻¹ of H₂S from the gas stream. An experiment over a period of 392 h showed stable performance. For Presentation at the Fifteenth Symposium on Biotechnology for Fuels and Chemicals, Colorado Springs, CO.     

催化裂化汽油中硫化物类型分布的气相色谱-硫化学发光检测的方法研究

采用气相色谱-硫化学发光检测器(GC-SCD),建立了催化裂化汽油(FCC汽油)中各种硫化物类型分布的分析方法。考察了色谱条件对催化裂化汽油中各种硫化物分离的影响,定性了某催化裂化汽油中的58个硫化物。采用该方法,硫化物中的硫在其质量浓度为0.5~800.0 mg/L时,其峰面积与质量浓度呈较好的线性关系,相关系数达0.999,其响应与硫化物的类型无关。FCC汽油中几种主要硫化物(噻吩、正丁硫醇、2-甲基噻吩、3-甲基噻吩、2,4-二甲基噻吩)的浓度测定值的相对标准偏差(RSD)均小于5.0%。当信噪