Crystal Structure of Tl<Subscript>2</Subscript>[NbCl<Subscript>6</Subscript>] and Tl<Subscript>2</Subscript>[NbBr<Subscript>6</Subscript>]

Single crystals of Tl₂[NbCl₆] (1) and Tl₂ [NbBr₆] (2) are obtained as black needles on heating TlCl, Nb, S₂Cl₂ (1) and Tl, Nb, and Br₂ at 400°C (2). Tl₂NbBr₆ also forms in the reaction of TlBr, Nb, Br₂, and S at 500°C. Both compounds crystallize in the K₂[PtCl₆] structure type to form non-distorted octahedral [NbХ₆]^2– anions (Nb–Cl 2.397(4) Å and Nb–Br 2.516(2) Å). The magnetic properties of Tl₂[NbBr₆] in a range 5-300 K indicate an antiferromagnetic interaction between Nb⁴⁺ ion spins (d¹, S = 1/2). On cooling, the compound becomes a noncollinear ferromagnet with T_c = 23 K.     

Interaction of components in the Tl<Subscript>2</Subscript>Se-Tl<Subscript>4</Subscript>SnSe<Subscript>4</Subscript>-Tl<Subscript>9</Subscript>SbSe<Subscript>6</Subscript> quasi-ternary system

The interaction in the Tl₂Se-Tl₄SnSe₄-Tl₉SbSe₆ quasi-ternary system was studied by differential thermal analysis, X-ray powder diffraction analysis, and mathematical modeling. The projection of the liquidus surface and a spatial phase diagram of the system were constructed. It was determined that this system is of the eutectic type with boundary solid solutions based on the initial components. No formation of new intermediate compounds in the quasi-ternary system was detected.     

Crystal structure of Tl<Subscript>5</Subscript>{[Nb<Subscript>2</Subscript>S<Subscript>4</Subscript>Br<Subscript>8</Subscript>]Br}

By the high-temperature reaction of Nb₂S₄Br₄ and TlBr a thallium salt of the anionic cluster complex [Nb₂S₄Br₈]^4? is obtained. Its crystal structure is determined by X-ray structural analysis. The complex is also characterized by Raman spectroscopy and electrospray-mass-spectrometry.     

Phase equilibria in the Tl-TlCl-Te system and thermodynamic properties of the compound Tl<Subscript>5</Subscript>Te<Subscript>2</Subscript>Cl

The Tl-Te-Cl system was studied in the Tl-TlCl-Te composition region by differential thermal analysis, X-ray powder diffraction, and emf and microhardness measurements. A series of polythermal sections, an isothermal section at 400 K, and a projection of the liquidus surface of the phase diagram were constructed. The ternary compound Tl₅Te₂Cl characterized by a wide homogeneity region and incongruent melting by a syntectic reaction at 708 K was shown to exist. This compound was found to crystallize in tetragonal lattice (space group I4/mcm) with the parameters a = 8.921 Å, c = 12.692 Å, Z = 4. Wide phase separation regions were also found in the system, including a three-phase separation region in the Tl-TlCl-Tl₂Te subsystem. Regions of primary crystallization of phases, and the types and coordinates of in- and monovariant equilibria in the T-x-y diagram were determined. From emf measurement data, the standard thermodynamic functions of formation and the standard entropy were calculated for the compound Tl₅Te₂Cl, as follows: ?ΔG ₂₉₈ ⁰ = 355.9 ± 1.1 kJ/mol, ?ΔH ₂₉₈ ⁰ = 377.1 ± 5.0 kJ/mol, and S ₂₉₈ ⁰ = 474.1 ± 6.8 J/(mol K).     

Subsolidus phase diagrams for the Tl<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Ln<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Hf(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> systems,where Ln = La-Lu

The Tl₂MoO₄-Ln₂(MoO₄)₃-Hf(MoO₄)₂ systems where Ln = La-Lu were studied in the subsolidus region using X-ray powder diffraction. Quasi-binary joins were revealed, and triangulation carried out. New ternary molybdates were prepared: Tl₅LnHf(MoO₄)₆ (5: 1: 2) for Ln = Ce-Ho, Tl₅LnHf(MoO₄)₆ (5: 1: 2) for Ln = Er-Lu, TlLnHf_0.5(MoO₄)₃ (1: 1: 1) for Ln = Ce-Nd, and Tl₂LnHf₂(MoO₄)_6.5 (2: 1: 4) for Ln = Ce-Lu. The crystallographic parameters of Tl₅LnHf(MoO₄)₆ (5: 1: 2) compounds for Ln = Er-Lu were determined.     

Phase diagram of the Tl-TlI-S system and thermodynamic properties of the compound Tl<Subscript>6</Subscript>SI<Subscript>4</Subscript>

Phase equilibria in the Tl-TlI-S composition region of the Tl-S-I system were studied by differential thermal analysis, x-ray powder diffraction, and measurements of the microhardness and the emf of concentration circuits relative to a thallium electrode. A series of polythermal sections, an isothermal section at 300 K, and a projection of the liquidus surface were constructed. Primary crystallization regions of six phases, including the ternary compounds Tl₆SI₄ and Tl₃SI, were outlined, and the types and coordinates of non- and monovariant equilibria were determined. It was shown that the ternary compound Tl₆SI₄ forms tie lines with Tl, TlI, Tl₂S, Tl₄S₃, and TlS in the subsolidus region and that the homogeneity region of Tl₆SI₄ below 400 K does not exceed 1 mol %. From the emf measurement data, the standard thermodynamic functions of formation and standard entropy of the compound Tl₆SI₄ were calculated: G _f,298⁰ = −601.7 ± 2.5 kJ/mol, ΔH _f,298⁰= −595.1 ± 4.0 kJ/mol, and S ₂₉₈⁰ = 672 ± 10 J/(mol K).     

NaBO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>WO<Subscript>4</Subscript> quaternary system

This is the first study of the NaBO₂-Na₂CO₃-Na₂MoO₄-Na₂WO₄ quaternary system by differential thermal analysis. Na₂[MoO_4(x)WO_{4(1 − x)}] solid solutions in the quaternary system are found to not decompose.     

Interactions in the system Mn(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-HCONH<Subscript>2</Subscript>-H<Subscript>2</Subscript>O

Solubilities and solid phases in the system Mn(NO₃)₂-HCONH₂-H₂O were studied by an isothermal method at 25°C. The congruently saturating compound Mn(NO₃)₂ · 2HCONH₂ · 2H₂O was isolated; the concentration conditions for its crystallization in the system were determined. The solid phases of the system were characterized by physicochemical methods (X-ray powder diffraction, differential thermal analysis, IR spectroscopy, and crystal-optical analysis).     

LiF-LiCl-LiVO<Subscript>3</Subscript>-Li<Subscript>2</Subscript>SO<Subscript>4</Subscript>-Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript> system

Phase equilibria in the LiF-LiCl-LiVO₃-Li₂SO₄-Li₂MoO₄ system have been studied by differential thermal analysis. The eutectic composition has been determined as follows (mol %): LiF, 17.4; LiCl, 42.0; LiVO₃, 17.4; Li₂SO₄, 11.6; and Li₂MoO₄, 11.6, with the melting temperature equal to 363°C and the enthalpy of melting equal to (284 ± 7) kJ/kg.     

Glass formation in the Li<Subscript>2</Subscript>O-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>-TeO<Subscript>2</Subscript> system

In the Li₂O-Ta₂O₅-TeO₂ system, the boundaries of the glass region have been determined. The electrical and spectral properties of glasses and crystalline materials have been investigated.     

Four-component system LiF-K<Subscript>2</Subscript>WO<Subscript>4</Subscript>-CaF<Subscript>2</Subscript>-BaWO<Subscript>4</Subscript>

The four-component system LiF-K₂WO₄-CaF₂-BaWO₄ has been studied for the first time using physicochemical methods. The a priori prediction of the phase complex revealed the phase tree and crystallization path of the system. The prediction was verified experimentally, by construction of a topologic model of the phase diagram, and the solution of the equations of the general law of liquidus-surface formation. The density has been measured, and the heat-storage properties of eutectic mixtures have been estimated.     

Hydrogen generation from H<Subscript>2</Subscript>O/H<Subscript>2</Subscript>O<Subscript>2</Subscript>/MnWO<Subscript>4</Subscript> system

Hydrogen gas as a clear energy resource was found to be largely bubbled from a H₂O/H₂O₂/MnWO₄ system. MnWO₄ powder was fabricated by an aqueous reaction method. The powder was characterized with X-ray diffraction (XRD), transmission electron microscope (TEM), and X-ray photoelectron spectrometry (XPS). The efficiency of the hydrogen generation increases with an increase in initial pH in the appropriate range, H₂O₂ proportion, MnWO₄ proportion, and intensity of light resource. Calcining at 400 °C for 1 h can make the MnWO₄ powder synthesized by an aqueous reaction more effective for H₂ generation and more stable in higher initial pH. The MnWO₄ catalyst shows a long-term stability for photocatalytic H₂ generation. A mechanism was suggested for the hydrogen generation from the H₂O/H₂O₂/MnWO₄ system together with XPS analysis.     

Solubility isotherm for the Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>-H<Subscript>2</Subscript>O system

Solubility in the Na₂MoO₄-Na₂SO₄-H₂O system was studied using isothermal saturation at 5–100°C. The boundaries of crystallization fields were determined for sodium sulfate and sodium molybdate. Solid solutions were not observed within the range of the temperatures studied. The density, refractive index, and dynamic viscosity of the saturated solutions of the system were determined, and these data were used to calculate the molar volume, kinematic viscosity, and apparent molar volume of the sum of salts in these solutions. All property isotherms of solutions are in a strict correlation with the solubility in the system; this correlation is represented as an isobaric-isothermal diagram.     

Phase formation in the Ag<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-MgMoO<Subscript>4</Subscript>-Al<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> system

The subsolidus region of the Ag₂MoO₄-MgMoO₄-Al₂(MoO₄)₃ ternary salt system has been studied by X-ray phase analysis. The formation of new compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ (0 ≤ x ≤ 0.4) and AgMg₃Al(MoO₄)₅ has been determined. The Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ variable-composition phase is related to the NASICON type structure (space group R \(\bar 3\) c). AgMg₃Al(MoO₄)₅ is isostructural to sodium magnesium indium molybdate of the same formula unit and crystallizes in triclinic system (space group P \(\bar 1\), Z = 2) with the following unit cell parameters: a = 9.295(7) Å, b = 17.619(2) Å, c = 6.8570(7) Å, α = 87.420(9)°, β = 101.109(9)°, γ = 91.847(9)°. The compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ and AgMg₃Al(MoO₄)₅ are thermally stable up to 790 and 820°C, respectively.     

Phase equilibria in the Ce<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>O-P<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Ce₂O₃-K₂O-P₂O₅ ternary system has been investigated by thermoanalytical methods (DTA, DSC), powder X-ray diffraction, XPS and IR spectroscopy. The existence of three double potassium-cerium(III) phosphates has been confirmed and a new binary phosphate K₄Ce₂P₄O₁₅ has been found. Phase diagram and isothermal section at room temperature of the system Ce₂O₃-K₂O-P₂O₅ have been presented.     

Phase diagram of V<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript>-Ag<Subscript>2</Subscript>O system

The results concerning the synthesis, structure and thermal properties of V₂O₅-MoO₃-Ag₂O samples in the vanadium rich region of ternary system are presented in the form of quasi-binary phase diagrams in which at constant V₂O₅/MoO₃ molar ratios, equal 9:1, 7:3 and 1:1, the content of Ag₂O was variable. A new ternary phase isostructural with NaVMoO₆ has been detected in the investigated system.     

Oxygen redistribution in ZrO<Subscript>2</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript> system

This work represents the results of oxygen redistribution studies at quantitative and isotopic levels in synthesis and thermal treatment of ZrO - (0 to 35 mol %) Y₂O₃ solid solution crystals. The crystals were grown by directed melt crystallization method in a cold container using direct high-frequency heating. The crystal oxygen content and isotopic composition data was collected with respect to stabilizer concentration and technological conditions of synthesis. The temperature and frequency relationships of crystal electroconductivity were also studied. Some strength and tribological characteristics of the given materials were represented. The solid state formation by directional melt crystallization was shown to involve oxygen isotopic exchange interaction between the melt, growing crystal, and gas phase.     

Dual course of bisacetonation of D-xylose in a system Me<Subscript>2</Subscript>CO-Me<Subscript>2</Subscript>C(OMe)<Subscript>2</Subscript>-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

In the course of formation of a bisisopropylidene protective group by keeping D-xylose in a mixture Me₂CO-(MeO)₂CMe₂-H₂SO₄ alongside the expected 1,2:4,5-O-diisopropylidene derivative formed minor dimethylacetal, 2,3:4,5-O-diisopropylidene-D-xylose, inseparable from the main product by the chromatography on SiO₂. The conditions were found for the selective formation and isolation of the latter, some its one-pot transformations were studied resulting in synthetically promising orthogonally protected acyclic C⁵-synthons.     

Solid solutions in the MgO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Coexisting solid solutions with spinel and corundum structure were synthesized at 1773 K and two pressures, 1 bar and 25 kbar. Samples were analyzed by electron microprobe analysis and X-ray powder diffraction. Pressure and temperature were shown to affect the properties of the solid solutions in different ways. Pressure governs the composition of the defect spinel Mg_1−xAl₂O₄, and temperature changes the cation distribution between coexisting phases. This allows one to separate the effects of cation exchange and magnetic contribution to the heat capacity in thermodynamic modeling. The defect spinel itself can form only because γ-Al₂O₃ exists, polymorph with spinel structure.