Effect of hair dyes and bleach on the hair protein patterns as revealed by isoelectric focusing

The effect of hair dyes, i.e., temporary, semi-permanent, or permanent hair dyes, or hair bleach on the isoelectric focusing (IEF) hair protein patterns was studied. A permanent hair dye (metallic, alkaline oxidative, or acidic oxidative) and hair bleach induced changes in the IEF hair protein patterns and in the intensity of hair protein bands. The changes in the IEF patterns, caused by the alkaline oxidative dye or the bleach, are considered to result from the combined effect of an alkaline agent and an oxidative agent in the alkaline oxidative dye and in the hair bleach.     

漂白过程的电化学研究 Ⅲ.利用旋转圆盘电极模拟照相漂白过程

将银旋转圆盘电极在给定时间内浸在漂白液中进行氧化。在氧化过程中,来自漂白液中的卤化物在银电极表面与氧化生成的银离子形成卤化银。氧化反应生成的卤化银量可以用电化学还原方法进行定量测定。利用这种简单的方法可以研究漂白动力学,研究漂白液的组份、浓度和pH对漂白速度的影响。通过记录在银电极上氧化还原对的电流。电位曲线可以定量描述漂白过程。     

The inhibition by amines and amino acids of bleach-induced luminol chemiluminescence during forensic screening for blood

Sprays containing alkaline solutions of peroxide and luminol are used as presumptive screens for bloodstains at crime scenes. These sprays can be subject to interference from hypochlorite-based cleaning agents (bleaches), leading to false positive results. This paper reports the screening of amines for their ability to decrease the interference by bleach while not greatly affecting the reaction with blood. The addition of glycine (0.05 mol L⁻¹) to the Grodsky formulation of luminol spray, together with an adjustment of the pH to 12, gave good discrimination between blood and bleach, and has the advantage that glycine is non-toxic compared to many other amines. The modified spray gave similar chemiluminescence intensity and duration as the unmodified Grodsky spray. However, it is recommended that this modification only be used when there is evidence that hypochlorite bleach may have been used at a scene. The amines triethylamine and sulfamate led to enhanced chemiluminescence in the presence of hypochlorite.     

Photochemical Bleaching of an Elaborate Artificial Light‐Harvesting Antenna

The target artificial light‐harvesting antenna, comprising 21 discrete chromophores arranged in a logical order, undergoes photochemical bleaching when dispersed in a thin plastic film. The lowest‐energy component, which has an absorption maximum at 660 nm, bleaches through first‐order kinetics at a relatively fast rate. The other components bleach more slowly, in part, because their excited‐state lifetimes are rendered relatively short by virtue of fast intramolecular electronic energy transfer to the terminal acceptor. Two of the dyes, these being close to the terminal acceptor but interconnected through a reversible energy‐transfer step, bleach by way of an autocatalytic step. Loss of the terminal acceptor, thereby switching off the energy‐transfer route, escalates the rate of bleaching of these ancillary dyes. The opposite terminal, formed by a series of eight pyrene‐based chromophores, does not bleach to any significant degree. Confirmation of the various bleaching steps is obtained by examination of an antenna lacking the terminal acceptor, where the autocatalytic route does not exist and bleaching is very slow.     

Delivery of both active enzyme and bleach from water-in-silicone oil (D(4)) emulsions

Advanced cleaning formulations, such as liquid laundry packages, consist of many components that require a complex mixture of interfacial actives including silicones for foam control, bleach for brightening, and enzymes for stain removal. Many of these ingredients are mutually incompatible, particularly in liquid formulations where they can be in intimate contact over extended periods of time. Solid dispersions of a prototypical bleach, NaBO3, in silicone polyether surfactants were shown to be very stable over time, even in the presence of water-in-silicone (D(4)) emulsions containing the enzyme alpha-chymotrypsin. Normally, perborates undergo rapid decomposition on contact with water. The rate of denaturation of the enzyme in the emulsion was similarly unaffected by the presence of the bleach until the emulsion was broken, unlike the case where the polyether surfactant was not present. The polyether surfactant thus protects the perborate from hydration and the enzyme from denaturing on contact with silicone oil until excess water and high shear are applied to the emulsion; protective mechanisms are discussed.     

Photodetachment of ferrocyanide in reverse micelles

Solvated electrons have been generated in reverse micelles (RMs) through photodetachment of ferrocyanide (Fe(CN)(6)(4-)) in sodium bis(2-ethylhexyl) sulfosuccinate (AOT) RMs. We have measured both bleach recovery of the parent ferrocyanide CN stretch in the infrared and the decay of the solvated electron absorption at 800 nm. The bleach recovery has been fit to a diffusion model for the geminate recombination process. The fit parameters suggest a narrowing of the spatial distribution of ejected electrons due to confinement in the RMs when compared to bulk water. The diffusion coefficient of the solvated electron does not appear to be significantly affected by RM confinement. The decay of the solvated electron absorption exhibits an additional decay component that is not observed in bulk water and is smaller for larger RMs. No corresponding additional component is seen in the parent ferrocyanide IR bleach recovery, which supports our interpretation that the confinement-induced new decay process in RMs is due to electrons reacting with AOT headgroups.     

Sub-picosecond time-resolved IR spectroscopy of the vibrational dynamics of Rh (CO)2 (acac)

Sub-picosecond pulses are used to measure the transient IR spectra of vibrationally excited Rh(CO)₂ (acac) in dilute solutions of n-hexane and CCl₃H. Ground-state bleach and excited-state absorption features are observed at t_D>0, while interference-like spectra characteristic of the perturbed free induction decay (FID) of the probe polarization are seen at t_D<). At t_D>), the bleach signal exhibits an initial decay (n-hexane, 3–6 ps; CCl₃H, 2.2–4 ps) attributed to rapid v-v coupling between the symmetric and asymmetric stretch modes of the dicarbonyl, followed by much slower (n-hexane, 61 ps; CCl₃H, 101 ps) population relaxation. Calculated transient spectra and bleach decay curves obtained from a 5-level density matrix model of the coupled CO oscillators account for the data, including the effects due to perturbed FID and rapid v-v coupling.     

Weitere Untersuchungen über den Mechanismus der reduktiven Spaltung von Azoverbindungen

The experimental results of our earlier investigation of the azodye bleach mechanism are interpreted in a revised manner. The reductive cleavage of methylorange by a dihydroquinoxaline proceeds in two steps. In the medium pH-range the first step (production of the hydrazo derivative) is slower (and not faster, as considered before) than the second (reductive splitting of the hydrazo derivative). In strongly acid solution this relation is reversed. The rate of disproportionation of the hydrazo derivative of methylorange is proportional to the concentration of the protonated hydrazo compound. For this reaction a two step mechanism is proposed in which a molecule of hydrazo compound is cleaved in a rate determining first step to an oxidizing particle and an amine molecule. In the following fast reaction the oxidizing intermediate attacks a second hydrazo molecule yielding methylorange and a further amine molecule. Based on this reaction sequence an azodye bleach mechanism is formulated which is able to explain the kinetics of the reductive cleavage of methylorange by a 1, 4-dihydroquinoxaline at any pH value. The azodye bleach mechanism is much more complex if the 1,4-dihydroquinoxaline used is able to form a radical or to tautomerize. The resulting reaction kinetics are discussed.     

Bleach interference in forensic luminol tests on porous surfaces: More about the drying time effect

As criminals try to avoid leaving clues at the scene of a crime, bloodstains are often washed away, but fortunately for investigators, they are difficult to eliminate completely. Porous surfaces easily retain blood traces, which are sometimes invisible to the naked eye. The reagent of choice for detecting latent blood traces on all types of surfaces is luminol, but its main disadvantage is a high degree of sensitivity to oxidising contaminants in the blood sample. If household bleach is used to clean bloodstains, presumptive tests are invalidated. Hypochlorites, however, are known to be unstable and deteriorate over time, and this feature could be of help in preventing household bleach-induced interference. Previous studies have evaluated the effect of the drying time on nonporous surfaces, but nothing has as yet been published about this effect on porous surfaces.Consequently, this paper reports on hypochlorite interference with luminol reagents used on this type of surface, evaluating the effects of drying time on the household bleach-luminol reaction, and ascertaining whether the drying procedure could be applied to prevent household bleach interference on bloodstained porous surfaces.The results indicate that the drying method may very well overcome household bleach interference in luminol reaction tests, if the investigation allows for an appropriate waiting time.     

The issue of contamination in recycling

This paper describes a model study aimed at establishing the main contamination issues for material recycling of HDPE blow-moulded containers. Detergent, bleach, lubricating oil and white spirit containers purchased from retailers have been recycled separately. Both atmospheric contamination during recycling, and the presence of contaminants in the recycled pellets and containers, have been measured. Standard washing and extrusion procedures were used with no attempt to optimise the treatment at this stage. The main contaminants found in the recycled bottles were oil and white spirit (both up to 0.6% by weight). Small amounts of chlorine (from bleach), limonene (from detergent) and oil additives were also found in the reprocessed pellet.     

Gas chromatographic and mass spectrometric analysis of chlorinated catechols occurring in pulp bleach liquors

Summary Chlorination step (C-step), spent bleach liquor from a kraft pulp mill and the product from the chlorination of guaiacol in aqueous solution have been investigated for their content of chlorinated catechols. After separation the samples were derivatized with diazoethane and analysed by glass capillary gas chromatography with an electron capture detector. The external standard mixture of all ethylated chlorocatechols was used in the measurements. The structures of the compounds identified were confirmed by gas chromatography/mass spectrometry. Eight chlorinated catechols were identified from a sample prepared by chlorination of guaiacol with Cl₂ in aqueous solution. However, only four of these compounds could be detected from a bleach liquor sample.     

Bleaching cellulosic fibers via pre-sorption of N-[4-(triethylammoniomethyl)-benzoyl]-butyrolactam chloride

The sorption of a novel cationic bleach activator, N-[4-(Triethylammoniomethyl)benzoyl]-butyrolactam Chloride (TBBC), was measured on regenerated bamboo fiber. At 25 °C near neutral pH, the sorption rate of TBBC onto the fiber was initially rapid and equilibrium was reached within 20 min. Adsorption equilibria experiments followed a Freundlich isotherm. At the sorption equilibrium, bleaching was initiated by addition of sodium perborate to liberate hydrogen peroxide, which reacted with TBBC to generate a peracid that is a more kinetically active oxidant than peroxide. A sorption–activation model was developed that supports the enhanced bleaching of cellulosic fibers using cationic bleach activators under neutral to alkaline conditions.     

Functional zinc(II) phthalocyanines bearing Schiff base complexes as oxidation catalysts for bleaching systems

Oxidation catalysis is used to increase the performance of hydrogen peroxide in laundry bleach applications. Bleach catalysts provide cost‐effective, energy‐saving and environmentally friendly bleach systems yielding perfect stain removal at lower temperatures. This comparative study is based on the synthesis of bis[bis(salicylhydrazonephenoxy)manganese(III)] phthalocyaninatozinc(II) ( 2 ), bis[bis(salicylhydrazonephenoxy)cobalt(III)] phthalocyaninatozinc(II) ( 3 ) and bis[bis(salicylhydrazonephenoxy)iron(III)] phthalocyaninatozinc(II) ( 4 ) as tri‐nuclear complexes consisting of two Schiff base complexes substituting a zinc phthalocyanine. Complexion on the periphery to obtain complexes 2 , 3 , 4 was performed through the reaction of a Schiff base‐substituted phthalocyanine using MnCl₂?4H₂O, CoCl₂?6H₂O or FeCl₃?6H₂O salts in basic condition in dimethylformamide. Fourier transform infrared, ¹H NMR, ¹³C NMR, UV–visible, inductively coupled plasma optical emission and mass spectra were applied to characterize the prepared compounds. The bleach performances of the three phthalocyanine compounds 2 , 3 , 4 were examined by the degradation of morin as hydrophilic dye. The degradation progress in the presence of catalysts 2 , 3 , 4 /H₂O₂ combination in aqueous solution was investigated using an online spectrophotometric method. It was found that the catalysts 2 , 3 , 4 exhibited better bleaching performance at 25 °C than tetraactylethylethylenediamine as bleach activator used in powder detergent formulations for stain removal. Copyright © 2015 John Wiley & Sons, Ltd.     

Hydrolytic stability of a series of lactam-based cationic bleach activators and their impact on cellulose peroxide bleaching

A series of five cationic bleach activators containing lactam-based leaving groups of varying ring size was synthesized and characterized. The hydrolytic stability of each activator was determined via HPLC-based analysis of hydrolysis products, titration of available oxygen, and whiteness assessment of cellulosic fibers using a peroxide-activator bleaching system following solution storage for various times under controlled conditions. Aqueous alkaline solutions of each activator hydrolysed at different rates with the slowest rates observed with the ω-octalactam ring system, the largest ring size investigated, and the most rapid hydrolysis was found with a six-membered lactam ring based activator. The whiteness of cotton bleached with stored bleach activator solutions inversely correlated with the hydrolysis rate for each activator. The hydrolysis rate followed pseudo first order kinetics.     

Bleach gel: a simple agarose gel for analyzing RNA quality

RNA-based applications requiring high-quality, non-degraded RNA are a foundational element of many research studies. As such, it is paramount that the integrity of experimental RNA is validated prior to cDNA synthesis or other downstream applications. In the absence of expensive equipment such as microfluidic electrophoretic devices, and as an alternative to the costly and time-consuming standard formaldehyde gel, RNA quality can be quickly analyzed by adding small amounts of commercial bleach to TAE buffer-based agarose gels prior to electrophoresis. In the presence of low concentrations of bleach, the secondary structure of RNA is denatured and potential contaminating RNases are destroyed. Because of this, the 'bleach gel' is a functional approach that addresses the need for an inexpensive and safe way to evaluate RNA integrity and will improve the ability of researchers to rapidly analyze RNA quality.     

An efficient and practical system for the catalytic oxidation of alcohols, aldehydes, and alpha,beta-unsaturated carboxylic acids

Upon exposure to commercial bleach (approximately 5% aqueous sodium hypochlorite), nickel(II) chloride or nickel(II) acetate is transformed quantitatively into an insoluble nickel species, nickel oxide hydroxide. This material consists of high surface area nanoparticles (ca. 4 nm) and is a useful heterogeneous catalyst for the oxidation of many organic compounds. The oxidation of primary alcohols to carboxylic acids, secondary alcohols to ketones, aldehydes to carboxylic acids, and alpha, beta-unsaturated carboxylic acids to epoxy acids is demonstrated using 2.5 mol % of nickel catalyst and commercial bleach as the terminal oxidant. We demonstrate the controlled and selective oxidation of several organic substrates using this system affording 70-95% isolated yields and 90-100% purity. In most cases, the oxidations can be performed without an organic solvent, making this approach attractive as a "greener" alternative to conventional oxidations.     

Analysis of wave packet motion in frequency and time domain: oxazine 1

Wave packet motion in the laser dye oxazine 1 in methanol is investigated by spectrally resolved transient absorption spectroscopy. The spectral range of 600-690 nm was accessible by amplified broadband probe pulses covering the overlap region of ground-state bleach and stimulated emission signal. The influence of vibrational wave packets on the optical signal is analyzed in the frequency domain and the time domain. For the analysis in the frequency domain an algorithm is presented that accounts for interference effects of neighbored vibrational modes. By this method amplitude, phase and decay time of vibrational modes are retrieved as a function of probe wavelength and distortions due to neighbored modes are reduced. The analysis of the data in the time domain yields complementary information on the intensity, central wavelength, and spectral width of the optical bleach spectrum due to wave packet motion.     

Excited state dynamics in solid and monomeric tetracene: The roles of superradiance and exciton fission

The excited state dynamics in polycrystalline thin films of tetracene are studied using both picosecond fluorescence and femtosecond transient absorption. The solid-state results are compared with those obtained for monomeric tetracene in dilute solution. The room temperature solid-state fluorescence decays are consistent with earlier models that take into account exciton-exciton annihilation and exciton fission but with a reduced delayed fluorescence lifetime, ranging from 20-100 ns as opposed to 2?μs or longer in single crystals. Femtosecond transient absorption measurements on the monomer in solution reveal several excited state absorption features that overlap the ground state bleach and stimulated emission signals. On longer timescales, the initially excited singlet state completely decays due to intersystem crossing, and the triplet state absorption superimposed on the bleach is observed, consistent with earlier flash photolysis experiments. In the solid-state, the transient absorption dynamics are dominated by a negative stimulated emission signal, decaying with a 9.2 ps time constant. The enhanced bleach and stimulated emission signals in the solid are attributed to a superradiant, delocalized S(1) state that rapidly fissions into triplets and can also generate a second superradiant state, most likely a crystal defect, that dominates the picosecond luminescence signal. The enhanced absorption strength of the S(0)→S(1) transition, along with the partially oriented nature of our polycrystalline films, obscures the weaker T(1)→T(N) absorption features. To confirm that triplets are the major species produced by relaxation of the initially excited state, the delayed fluorescence and ground state bleach recovery are compared. Their identical decays are consistent with triplet diffusion and recombination at trapping or defect sites. The results show that complications like exciton delocalization, the presence of luminescent defect sites, and crystallite orientation must be taken into account to fully describe the photophysical behavior of tetracene thin films. The experimental results are consistent with the traditional picture that tetracene's photodynamics are dominated by exciton fission and triplet recombination, but suggest that fission occurs within 10 ps, much more rapidly than previously believed.     

Nonadiabatic molecular dynamics simulations of correlated electrons in solution. 2. A prediction for the observation of hydrated dielectrons with pump-probe spectroscopy

The hydrated dielectron is a highly correlated, two-electron, solvent-supported state consisting of two spin-paired electrons confined to a single cavity in liquid water. Although dielectrons have been predicted to exist theoretically and have been used to explain the lack of ionic strength effect in the bimolecular reaction kinetics of hydrated electrons, they have not yet been observed directly. In this paper, we use the extensive nonadiabatic mixed quantum/classical excited-state molecular dynamics simulations from the previous paper to calculate the transient spectroscopy of hydrated dielectrons. Because our simulations use full configuration interaction (CI) to determine the ground and excited state two-electron wave functions at every instant, our nonequilibrium simulations allow us to compute the absorption, stimulated emission (SE), and bleach spectroscopic signals of both singlet and triplet dielectrons following excitation by ultraviolet light. Excited singlet dielectrons are predicted to display strong SE in the mid infrared and a transient absorption in the near-infrared. The near-infrared transient absorption of the singlet dielectron, which occurs near the peak of the (single) hydrated electron's equilibrium absorption, arises because the two electrons tend to separate in the excited state. In contrast, excitation of the hydrated electron gives a bleach signal in this wavelength region. Thus, our calculations suggest a clear pump-probe spectroscopic signature that may be used in the laboratory to distinguish hydrated singlet dielectrons from hydrated electrons: By choosing an excitation energy that is to the blue of the peak of the hydrated electron's absorption spectrum and probing near the maximum of the single electron's absorption, the single electron's transient bleach signal should shrink or even turn into a net absorption as sample conditions are varied to produce more dielectrons.     

阿达玛变换显微图象分析(Ⅱ)──荧光衰减对图象和定量分析数据的影响

采用计算机模拟的方法,系统地考察了试样的荧光衰减对阿达玛变换图象和定量分析数据的影响,并把阿达玛变换显微图象分析仪用于细胞内DNA的定量分析,得到了满意的结果。