聚乳酸-乙醇酸/纳米氧化锌复合电纺纤维装载亲疏水药物的控释及体外细胞毒性

利用静电纺丝技术制备了负载亲水性药物阿霉素(DOX)以及疏水性药物喜树碱(CPT)的复合纳米纤维. 先用巯基封端的普朗尼克(F127)修饰纳米氧化锌(FZnO), 再将FZnO负载盐酸阿霉素(DOX@FZnO), 最后将DOX@FZnO与CPT一起纺入聚乳酸-乙醇酸(PLGA)纤维中. 体外药物释放结果表明, 复合纳米纤维能够减小亲水性药物的突释, 减缓药物释放速率, 延长药物释放时间. 体外细胞活性结果表明, 双载药复合纤维比单载药复合纤维具有更强的细胞毒性, 能够有效抑制癌细胞生长.     

Investigation of nanomechanical and morphological properties of silane-modified halloysite clay nanotubes reinforced polycaprolactone bio-composite nanofibers by atomic force microscopy

There is remarkable interest in the fabrication of polymeric composite nano/micro-fibers by electrospinning for many applications ranging from bioengineering to water/air filtration. In almost all of these applications, the mechanical properties of both the polymer fibers and their assemblies, are significant. In this study, unmodified, 3-Glycidoxypropyltrimethoxysilane (GPTMS) or 3-Aminopropyltriethoxysilane (APTES) modified halloysite clay nanotube (HNT) reinforced polycaprolactone (PCL) nanofibers were successfully synthesized via the electrospinning. The morphology and mechanical features of the obtained electrospun fibers were investigated by atomic force microscopy (AFM) and AFM-based nanoindentation for single fibers in nanoscale, respectively. Besides, scanning electron microscopy and tensile strength tests were used to investigate whole fibrous structures in microscale. The AFMresults, accompanied by SEM and tensile strength, support the conclusion that silane-modification affected positively the morphology and mechanical characteristics of electrospun PCL nanofibers. Therefore, it was concluded that the morphological and mechanical features from the single fibers in the nanofiber mats were related to the whole fibrous structure.     

Fabrication of random and aligned electrospun nanofibers containing graphene oxide for skeletal muscle cells scaffold

Graphene oxide (GO)‐based materials have been explored in biomedical applications as active engineered materials for diagnosis and therapy. Although a large number of studies have been carried out in the last years, aspects involving the orientation and elongation of cells on GO immobilized on polymeric nanofibers are still scarce. We investigated the interactions between skeletal muscle cells and GO immobilized on random and aligned electrospun nanofibers of poly(caprolactone) (PCL), a biocompatible and biodegradable polymer. Oxygen plasma was employed to modify the nanofiber polymer surface to enhance the interactions between the PCL fibers and GO. Scanning electron microscopy and confocal microscopy revealed the morphology and orientation of skeletal muscle cells (C2C12 cells) on random and aligned GO/PCL nanofibers. The approach employed here is useful to investigate the interaction of skeletal muscle cells with biocompatible polymer nanofibers modified with GO intended for cell scaffolds and tissue engineering.     

Characterization of poly(methyl methacrylate) nanofiber mats by electrospinning process

In this study, the aim is to describe the influence of electrospinning parameters on the morphology, the water wetting property and dye adsorption property of poly(methyl methacrylate) nanofiber mats. Specifically, the effects of solution concentration, solvent type, applied voltage, distance between the electrodes and particulate reinforcement on the diameter and shape of the nanofibers were investigated. All poly(methyl methacrylate) nanofiber mats contained beaded nanofiber structures. With increasing the polymer solution concentration, the average fiber diameter also increased. Poly(methyl methacrylate) nanofiber mat electrospun from dimethylformamide solution resulted in thicker fibers when compared with the mat electrospun from acetone solution. Increasing the electric potential difference between the collector and the syringe tip did not increase the average fiber diameter. Besides increasing the distance between the electrodes resulted in a decrease in the average fiber diameter. When compared with PMMA nanofiber mat, thicker fibers were obtained with silica nanoparticles reinforced nanofiber mat. According to the water contact angle measurements, all poly(methyl methacrylate) nanofiber mats revealed hydrophobic surface property. PMMA nanofiber mat with the highest water contact angle gave rise to the highest dye adsorption capacity.     

Polymer entanglement loss in extensional flow: Evidence from electrospun short nanofibers

High strain rate extensional flow of a semidilute polymer solution can result in fragmentation caused by polymer entanglement loss, evidenced by appearance of short nanofibers during electrospinning. The typically desired outcome of electrospinning is long continuous fibers or beads, but, under certain material and process conditions, short nanofibers can be obtained, a morphology that has scarcely been studied. Here we study the conditions that lead to the creation of short nanofibers, and find a distinct parametric space in which they are likely to appear, requiring a combination of low entanglement of the polymer chains and high strain rate of the electrospinning jet. Measurements of the length and diameter of short nanofibers, electrospun from PMMA dissolved in a blend of CHCl₃ and DMF, confirm the theoretical prediction that the fragmentation of the jet into short fibers is brought about by elastic stretching and loss of entanglement of the polymer network. The ability to tune nanofiber length, diameter and nanostructure, by modifying variables such as the molar mass, concentration, solvent quality, electric field intensity, and flow rate, can be exploited for improving their mechanical and thermodynamic properties, leading to novel applications in engineering and life sciences. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1377–1391     

将源药包覆到聚己内酯超细纤维的芯部

采用同轴共纺技术,分别将白藜芦醇(Resveratrol,RT)和硫酸庆大霉素(Gentamycin Sulfate,GS)源药包覆在生物可降解的聚己内酯(PCL)超细(直径为几百纳米)纤维芯部.研究了这种纤维的制备过程以及它们的微观结构.这种复合纳米纤维可在医疗新产品开发中发挥作用,如用于制备新的羊肠线(体内手术伤口缝合线)或伤口敷布.     

Electrospun Polymeric Fibers Decorated with Silk Microcapsules via Encapsulation and Surface Immobilization for Drug Delivery

Hollow polymer microcapsules as drug carriers have the advantages of drug protection, storage, and controlled release. Microcapsules combined with tissue engineering scaffolds such as electrospun microfibers can enhance long-term local drug retention. However, the combination methods of microcapsules and fibers still need to be further explored. Here, different technical approaches to functionalize electrospun polycaprolactone (PCL) microfibers with silk fibroin (SF) microcapsules through encapsulation and surface immobilization are developed, including direct blending and emulsion electrospinning for encapsulation, as well as covalent and cleavable disulfide-linkage for surface immobilization. The results of “blending” approach show that silk microcapsules with different sizes could be uniformly encapsulated inside electrospun fibers without aggregation. To further reduce the use of organic solvents, the microcapsules in the aqueous phase can be uniformly distributed in the PCL organic phase and successfully electrospun into fibers using surfactant span-80. For surface immobilization, silk microcapsules are efficiently covalent binding to the surface of electrospun PCL fibers via click chemistry and exhibited noncytotoxic. Based on this method, with the incorporation of a disulfide bond, the linkages between microcapsule and fiber could be cleaved under reducing conditions. These microcapsule-electrospun fiber combination methods provide sufficient options for different drug delivery requirements.     

Novel ‘Nano in Nano’ Composites for Sustained Drug Delivery: Biodegradable Nanoparticles Encapsulated into Nanofiber Non‐Wovens

Novel ‘nano in nano’ composites consisting of biodegradable polymer nanoparticles incorporated into polymer nanofibers may efficiently modulate drug delivery. This is shown here using a combination of model compound‐loaded biodegradable nanoparticles encapsulated in electrospun fibers. The dye coumarin 6 is used as model compound for a drug in order to simulate drug release from loaded poly(lactide‐co‐glycolide) nanoparticles. Dye release from the nanoparticles occurs immediately in aqueous solution. Dye‐loaded nanoparticles which are encapsulated by electrospun polymer nanofibers display a significantly retarded release.

     

Effect of needle diameter on nanofiber diameter and thermal properties of electrospun poly(methyl methacrylate)

The effect of needle diameter on the resulting electrospun poly(methyl methacrylate) (PMMA) average nanofiber diameter has been evaluated for three different needle gauges. The resulting nanofibers were observed and analyzed by scanning electron microscopy (SEM), suggesting a lack of correlation between the needle diameter used and the resulting average nanofiber diameter. Thermogravimetric analysis (TGA) indicated an increase in the thermal stability of PMMA nanofibers when compared to powdered PMMA, while differential scanning calorimetry (DSC) studies evidenced lower glass transition temperatures (Tg) for PMMA nanofibers in the first heating cycle. Copyright © 2007 John Wiley & Sons, Ltd.     

Fluorescent PMMA/MEH‐PPV electrospun nanofibers: Investigation of morphology,solvent, and surfactant effect

Electrospinning is a powerful technique to produce nanofibers of tunable diameter and morphology for medicine and biotechnological applications. By doping electrospun nanofibers with inorganic and organic compounds, new functionalities can be provided for technological applications. Herein, we report a study on the morphology and optical properties of electrospun nanofibers based on the conjugated polymer poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV) and poly(methylmethacrylate) (PMMA). Initially, we investigate the influence of the solvent, surfactant, and the polymer concentration on electrospinning of PMMA. After determining the best conditions, 0.1% MEH‐PPV was added to obtain fluorescent nanofibers. The optical characterizations display the successful impregnation of MEH‐PPV into the PMMA fibers without phase separation and the preservation of fluorescent property after fiber electrospinning. The obtained results show the ability of the electrospinning approach to obtain fluorescent PMMA/MEH‐PPV nanofibers with potential for optical devices applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1388–1394     

Confinement mechanism of electrospun polymer nanofiber reinforcement

The sharp increase in elastic modulus of electrospun polymer nanofibers with decrease in their diameters is now a well-known phenomenon. Unfortunately, up to now, the physical reasons resulting in the above size-dependent behavior are unclear. The proposed explanation is based on the confinement concept. A manifesting mechanism of the confinement effect which provides the size-dependent elastic modulus of electrospun polymer nanofibers is discussed. According to this model, the nanofiber polymer matrix contains anisotropic regions consisting of correlated worm-like subchains, partially oriented along the fiber. A fiber elongation is accompanied by relative rotations of the above regions. Confinement effect is that these rotations are hindered by the fiber boundary. As a result, the elastic modulus depends on the fiber diameter. This restriction is dominant for the thin fibers, is decreasing with increase of the fiber diameter, and becomes negligible for thick fibers. Such a behavior is in good agreement with experimental observations. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Annealing Effect on Electrospun Polymer Fibers and Their Transformation into Polymer Microspheres

Electrospinning is a simple and convenient technique to produce polymer fibers with diameters ranging from several nanometers to a few micrometers. Different types of polymer fibers have been prepared by electrospinning for various applications. Among different post‐treatment methods of electrospun polymer fibers, the annealing process plays a critical role in controlling the fiber properties. The morphology changes of electrospun polymer fibers under annealing, however, have been little studied. Here we investigate the annealing effect of electrospun poly(methyl methacrylate) (PMMA) fibers and their transformation into PMMA microspheres. PMMA fibers with an average size of 2.39 μm are first prepared by electrospinning a 35 wt% PMMA solution in dimethylformamide. After the electrospun fibers are thermally annealed in ethylene glycol, a non‐solvent for PMMA, the surfaces of the fibers undulate and transform into microspheres driven by the Rayleigh instability. The driving force of the transformation process is the minimization of the interfacial energy between the polymer fibers and ethylene glycol. The sizes of the microspheres fit well with the theoretical predictions. Longer annealing times are found to be required at lower temperatures to obtain the microspheres.     

A review on electrospun polymeric nanofibers: Production parameters and potential applications

This review deals with electrospun nanofibers and their applications in several fields. Nanofibers have mainly been produced via electrospinning technique due to the simple, cost-effective, and versatile setup. Electrospinning is defined as a process, which produces fibers from its polymer solutions under exposure of high electric field voltage. The technique needs optimization of several parameters such solution, processing and ambient parameters to refine nanofiber morphology, diameter and porosity. The basic technique has been modified to produce composite fibers and to increase production capacity. Nanofiber characterization methods are summarized with examples. The relation between electrospinning and electrospraying is discussed. Nanofibers have the ability to form highly porous mesh with large surface to volume ratio enhancing its performance for various applications such as water filtration, tissue engineering scaffold, wounds, fiber composites, drug release and protective clothes. Single nanofibers could potentially be used as soft microrobots for drug delivery. Finally, results from modeling and simulations are illustrated.     

Enhancement of conductivity by diameter control of polyimide-based electrospun carbon nanofibers

Oxydianiline-pyromellitic dianhydride poly(amic acid) (ODA-PMDA PAA) was polymerized with a catalyst support of triethyl amine for controlling molecular weight. This polymer was used for electrospinning in the preparation of PAA nanofibers, a precursor of carbon nanofibers. Here the amount of catalyst and concentration of PAA solution were optimized to produce polyimide-based carbon nanofibers approximately 80 nm in diameter. The effects of molecular weight of PAA, bias voltage, and spinning rate on the morphology of electrospun PAA and polyimide nanofibers have been evaluated. We showed that the conductivity of the carbon nanofiber mat decreased with increasing nanofiber diameter, where the conductivity of polyimide-based carbon nanofiber mat was much higher than those of other types of carbon nanofiber mat. The key ingredient to increase conductivity in a carbon nanofiber mat was found to be the number of cross junctions between nanofibers.     

Breaking embedded electrospun fibers (BEEF): Fabrication of polymer spheres encapsulated in polymer films

In this work, a novel method to fabricate polymer spheres encapsulated in polymer films by breaking embedded electrospun fibers (BEEF) was developed. Polymer fibers were first prepared by electrospinning and embedded in other polymer films using a three‐layer deposition method. After thermal annealing, the electrospun fibers transform into individual spheres with regular spacing and sizes. Poly(methyl methacrylate) (PMMA) and polystyrene (PS) are both used as the fiber or film materials. The transformation process can be observed in‐situ by optical microscope (OM) and is similar to the Plateau–Rayleigh instability. The growth rates of the surface undulation of the fibers are calculated, and higher growth rates are observed at higher annealing temperatures. The sizes of the encapsulated polymer spheres agree well with the theoretical predictions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2463–2470     

Electrospun nanofibers for drug delivery applications: Methods and mechanism

Electrospinning procedures such as blend electrospinning, coaxial electrospinning, and emulsion electrospinning have been used for the fabrication of electrospun nanofibers (ENFs) for biomedical applications. These ENFs are attracted great interest especially in drug delivery applications due to their small size, high surface area-to-volume, and porosity. The aim of this review is to focus on the controlled release mechanism among the different electrospinning methods, and the selectivity of hydrophilic, water-soluble polymers as a carrier for drug. The mechanism for the drug delivery depends mainly on the method of drug loading, polymeric interactions, and the nature of polymer swelling, erosion, or degradation. This review compressed on the literature survey about the fabrication of nanofibers by different electrospinning methods, factors affecting the nanofiber morphologies, selectivity of polymeric blends for successful controlled release behavior, and the mechanism involved in the drug release steps.     

Fabrication and characterization of zein-based nanofibrous scaffolds by an electrospinning method

Electrospun zein membranes were prepared using DMF as solvent. By changing the solution concentration, the electrospinning voltage and the distance between the spinneret and collector, nanofibrous meshes without bead defects could be obtained. In order to improve the mechanical strength of the hydrated zein meshes, core-shell-structured nanofibrous membranes with PCL as the core material and zein forming the shell were prepared by coaxial electrospinning. The core-shell structure of the composite fibers was confirmed by SEM characterization of the fibers, either extracted with chloroform to remove the inner PCL, or elongated to expose their cross-section. The composition and average diameter of the composite fibers could be modulated by the feed rate of the inner PCL solution. It was found that the core-shell fibrous membranes have similar wettability to the electrospun zein mesh. The presence of PCL in the fibers could significantly improve the mechanical properties of the zein membrane.     

Carbon nanofibers with nanoporosity and hollow channels from binary polyacrylonitrile systems

Carbon nanofibers with new structural features, e.g. nanoporosity, hollow, U-shape cross-section, were generated by utilizing the phase separation behavior of polymer additive with polyacrylonitrile (PAN). The approach involved the formation of precursor fibers by electrospinning of binary mixtures of PAN with poly(ethylene oxide) (PEO), cellulose acetate (CA) or poly(methyl methacrylate) (PMMA), the removal of the polymer and the carbonization of the remaining PAN. The carbon nanofiber yield was ca 50% of PAN in all cases. Nanoporous carbon nanofibers with an average diameter of 100 nm were generated from the water treated PAN/PEO precursors. Multi-channel hollow fibers (90-190 nm diameters) were produced from the acetone treated PAN/CA precursors. Carbon fibers produced from the chloroform treated PAN/PMMA precursors were 250-400 nm in diameters and consisted of varied hollow structures, i.e., hollow and U-shape cross-sections from those containing 30% and 50% PAN, respectively, and multi-channel hollow fibers from the 70/30 PAN/PMMA precursor. Carbonization of equal-mass PAN/PMMA as-spun fibers also produced similarly U-shape cross-sections as the chloroform treated ones, showing promise of direct carbonization. This simple and yet versatile approach to create new structural features in carbonized fibers has shown to depend on the distinct phase separation as well as the pyrolytic behaviors of the second polymer component.     

Resorbable polymer electrospun nanofibers: History,shapes and application for tissue engineering

Resorbable polymer electrospun nanofiber-based materials/devices have high surface-to-volume ratio and often have a porous structure with excellent pore interconnectivity,which are suitable for growth and development of different types of cells.Due to the huge advantages of both resorbable polymers and electrospun nano fibers,re sorbable polymer electrospun nanofibers(RPENs)have been widely applied in the field of tissue engineering.In this paper,we will mainly introduce RPENs for tissue engineering.Firstly,the electrospinning technique and electrospun nanofiber architectures are briefly introduced.Secondly,the application of RPENs in the field of tissue engineering is mainly reviewed.Finally,the advantages and disadvantages of RPENs for tissue engineering are discussed.This review will provide a comprehensive guide to apply resorbable polymer electrospun nanofibers for tissue engineering.     

低结晶度聚ε-己内酯电纺膜的制备及其药物控释行为

以芳氧基稀土三(2,6-二叔丁基-4-甲基苯氧基)镧(La(OAr)3)为催化剂,通过加入少量(8.5 mol%)碳酸2,2-二甲基三亚甲基酯(DTC)与ε-己内酯(CL)进行无规共聚合,成功制备了低结晶度的脂肪族内酯-碳酸酯无规共聚酯(PCD)材料,并用1H-NMR、SEC、DSC和WAXS证明了产物的结构和性能.以...