Interaction of the mutagen ethidium bromide with DNA, using a carbon paste electrode and a hanging mercury drop electrode

The interaction of ethidium bromide (2,7-diamino-10-ethyl-9-phenylphenanthridinium bromide; EB) with double stranded (ds) calf thymus DNA and thermally denatured single stranded (ss) DNA was studied in solution and at the electrode surface by means of transfer voltammetry using a carbon paste electrode (CPE) as working electrode in 0.2 M acetate buffer, pH 5.0. As a result of intercalation of this dye between the base pairs of dsDNA, the characteristic peak of dsDNA, due to the oxidation of guanine residues, decreased and after a particular concentration of EB a new peak at +0.81 V appeared, probably due to the formation of a complex between dsDNA and EB. The non-intercalated EB gives another peak, but at an increased concentration of the dye. A similar behaviour was observed during the interaction of the dye with ssDNA.Furthermore, the interaction of EB with ds, ss and supercoiled (sc) DNA was studied at the hanging mercury drop electrode (HMDE) surface by means of alternating current voltammetry in 0.3 M NaCl and 50 mM sodium phosphate buffer (pH 8.5) as supporting electrolyte. dsDNA yields a smaller peak at −1.42 V (peak III) compared to the one yielded by ssDNA, since the latter is a relaxed and more accessible form. By addition of EB into the buffer solution an increase of peak III was observed in the dsDNA form as well as in ssDNA resulting from their interaction with EB. Furthermore, the appearance of peak III in covalently closed circular scDNA after exposure to increasing concentrations of EB is a result of the introduction of ‘free ends’ in DNA affecting its structural integrity.     

A sensitive DNA electrochemical biosensor based on magnetite with a glassy carbon electrode modified by muti-walled carbon nanotubes in polypyrrole

A novel sensitive electrochemical biosensor based on magnetite nanoparticle for monitoring DNA hybridization by using MWNT-COOH/ppy-modified glassy carbon electrode is described. In this new detection system, mercapatoacetic acid (RSH)-coated magnetite nanoparticles, capped with 5′-(NH₂) oligonucleotide, is used as DNA probe to complex 29-base polynucleotide target (a piece of human porphobilinogen deaminase PBGD promoter from 170 to 142). Target sequence hybridized with the probe results in the decrease of the reduction peak current of daunomycin connected with probe. The response of non-complementary sequence was almost the same as the blank, and the response of three-base mismatched sequence within 29-base polynucleotide was obviously distinguished from complementary sequence, which can easily identify point mutation of DNA. The equation of calibration plot is i_p (μA) = 0.8255 − 0.0847c_{target oligonucleotide} × 10¹³ in the range of 6.9 × 10⁻¹⁴ to 8.6 × 10⁻¹³ mol/L, and correlation coefficient is 0.9974. The detective limit is 2.3 × 10⁻¹⁴ mol/L of target oligonucleotide. This device can be optimized for the detection of complex sequence.     

Electrochemical biosensing of DNA hybridization by ferrocenyl groups functionalized polypyrrole

We have developed a new material based on polypyrrole functionalized with both ferrocenyl group and DNA probe. We have developed a precursor polymer based on a pyrrole 3-acetic acid and a pyrrole bearing ferrocenyl groups substituted by easy leaving group in which amino-labeled oligonocleotides probe were directly linked. The electrochemical response of the modified electrode was examined both in aqueous and organic media and shows high electroactivity in both media. A large modification of redox activity of ferrocenyl groups was obtained upon addition of ODN target to the electrolytic media, which is determined by amperometric methods. The detection limit of this electrochemical biosensor is about 10⁻¹⁴ mol without any signal processing.     

Electrochemical behavior and detection of guanine using a sodium montmorillonite-modified carbon paste electrode

Herein, a sodium montmorillonite-modified carbon paste electrode is described for the electrochemical determination of guanine. Guanine yields a well-defined and very sensitive oxidation peak at the sodium montmorillonite-modified carbon paste electrode. Compared with the unmodified carbon paste electrode, the modified electrode facilitates the electron transfer of guanine, since it notably increases the oxidation peak current and lowers the oxidation overpotential of guanine. Based on this, a simple sensitive reliable electrochemical method is proposed for the detection of guanine after all the experimental parameters, such as solution pH value, sodium montmorillonite content in the carbon paste electrode, accumulation potential, and time, are optimized. Under the optimized conditions, the oxidation peak current of guanine varies linearly with its concentration in the range 5.0×10⁻⁸ to 2.0×10⁻⁵ M and the detection limit (signal-to-noise=3) is 2.0×10⁻⁸ M after 4-min accumulation. This method is successfully demonstrated with urine samples. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 2, pp. 178–182. The text was submitted by the authors in English.     

Accumulated detection of ethidium bromide using a UV-irradiated DNA film modified electrode and its application for electrochemical detection of an environmental pollutant

In this study, DNA was first fabricated on a glassy carbon electrode by UV-irradiation. Through this process, water-soluble DNA was converted into insoluble materials, and a stable DNA film formed on the electrode. Ethidium bromide (EtBr), a typical model substance for harmful chemicals having planer structure, was used as an electroactive intercalator. This allowed our group to investigate the electrochemical and accumulative behaviors of the intercalator in UV-irradiated DNA film on the electrode. The UV-irradiated, DNA film-modified electrode (UV-DNA-FE) made it possible to accumulate electroactive EtBr on the electrode and detect it after accumulation. The modified electrode was used to detect dibenzofuran (DBF) as an environmental pollutant. The measurements were successfully obtained by focusing on the variation of the electrode response of EtBr, based on the competitive reaction between EtBr and DBF for the intercalating sites of DNA. The results indicated the possibility of using UV-DNA film as a sensing mechanism.     

Bienzymatic amperometric biosensor for glucose based on polypyrrole/ceramic carbon as electrode material

A novel amperometric biosensor utilizing two enzymes, glucose oxidase (GOD) and horseradish peroxidase (HRP), was developed for the cathodic detection of glucose. The glucose biosensor was constructed by electrochemical formation of a polypyrrole (PPy) membrane in the presence of GOD on the surface of a HRP-modified sol-gel derived-mediated ceramic carbon electrode. Ferrocenecarboxylic acid (FCA) was used as mediator to transfer electron between enzyme and electrode. In the hetero-bilayer configuration of electrode, all enzymes were well immobilized in electrode matrices and showed favorable enzymatic activities. The amperometric detection of glucose was carried out at +0.16 V (versus saturated calomel reference electrode (SCE)) in 0.1 M phosphate buffer solution (pH 6.9) with a linear response range between 8.0×10⁻⁵ and 1.3×10⁻³ M glucose. The biosensor showed a good suppression of interference in the amperometric detection.     

Synthesis and characterization of novel dopamine-derivative:Application of modified multi-wall carbon nanotubes paste electrode for electrochemical investigation

Novel dopamine-derivative compound,3,5-diamino-N-(3,4-dihydroxyphenethyl)benzamide(3,5-DAB)was prepared in two steps.In the first step dopamine hydrochloride was reacted with 3,5-dinitrobenzoyl chloride in the presence of propylene oxide.In the second step reduction of nitro groups resulted in preparation of 3,5-DAB in quantitative yield.This material was characterized using conventional spectroscopic methods such as FT-IR and ~1H NMR.In addition,the redox response of a modified carbon nanotubes paste electrode of 3,5-DAB was investigated in aqueous solution at a neutral pH.The result showed that the electrode process has a quasi-reversible response,withΔE_p,greater than the(59/n) mV expected for a reversible system.Finally,the diffusion coefficient for redox process in paraffin oil matrix obtained using chronoamperometry methods.     

pharmaceutical and biological samples using modified multiwall carbon nanotubes paste electrode

A carbon paste electrode(CPE) chemically modified with multiwall carbon nanotubes and ferrocene(FC) was used as a selective electrochemical sensor for the simultaneous determination of trace amounts of cysteamine(CA) and folic acid(FA).This modified electrode showed very efficient electrocatalytic activity for the anodic oxidation of CA.The peak current of differential pulse voltammograms of CA and FA increased linearly with their concentration in the ranges of 0.7-200μmol/L CA and 5.0- 700μmol/L FA.The detection limits for CA and FA were 0.3μmol/L and 2.0μmoI/L,respectively.The diffusion coefficient(D) and transfer coefficient(α) of CA were also determined.These conditions are sufficient to allow determination of CA and FA both individually and simultaneously.     

Electrochemical oxidation of cisatracurium on carbon paste electrode and its analytical applications

The electrochemical oxidation of cisatracurium was investigated by cyclic voltammetry and differential pulse voltammetry at a carbon paste electrode and the experimental parameters have been optimized in order to obtain the optimum analytical signal. A differential pulse voltammetric method with carbon paste electrode is described for the determination of cisatracurium with detection limit of 0.38 μg/ml and quantitation limit of 1.26 μg/ml. The proposed method was applied to determine the content of cisatracurium in human urine and human serum, obtaining accurate and precise results.     

Electrochemical behavior of mesoionic sydnone derivatives at wax-impregnated carbon paste electrode

The-N=N-moiety in the mesoionic 3-phenyl sydnone and its derivatives like tolyl sydnones and anisyl sydnones undergo two-electron irreversible electrochemical reduction in Britton-Robinson (BR) buffer at wax-impregnated carbon paste electrodes. Infrared, nuclear magnetic resonance, and mass-spectral data, used to characterize the reduced product, confirm the proposed mechanism. The pasting liquid at the surface of the electrode is found to decrease the electron-transfer rate and cause a higher overpotential compared to homogeneous electrodes. The influence of variation of pH on the peak current and peak potentials is studied in the acidic range. The cathodic peak shifts to more negative potentials with increase in pH, indicating the involvement of proton in the reduction process. This could be a new method of preparation of 2,4-dihydro-3-substituted 1,2,3-oxadiazole-5-one. The substituent effect and the effect of variation of scan rate, concentration, and temperature on peak currents and peak potentials is discussed. The cathodic shift in various organic co-solvents (methanol, acetonitrile, DMF, DMSO) using BRB as the supporting electrolyte is examined. Published in Russian in Elektrokhimiya, 2006, Vol. 42; No. 7, pp. 862–868. The text was submitted by the authors in English.     

Electrochemical sensor for Cd2+ and Pb2+ detection based on nano-porous pseudo carbon paste electrode

An electrochemical sensor based on self-made nano-porous pseudo carbon paste electrode (nano-PPCPE) has been successfully developed, and used to detect Cd²⁺ and Pb²⁺. The results showed that the electrodes can quantitatively detect trace Cd²⁺ and Pb²⁺, and with satisfied limit of detection, which has great significance in electrochemical analysis and detection.     

对硝基苯酚在多壁碳纳米管修饰玻碳电极上的电化学行为及分析测定

水中对硝基苯酚主要来源于化工、制药行业,它有致癌作用。人们已对它的测定方法进行了大量的研究,最早采用的测定方法是分光光度法,其检测限偏高;色谱法测定对硝基苯酚,操作繁琐,仪器昂贵,分析成本高。后来又发展了一种操作更方便的直接用于测定的电化学方法。本文旨在利用碳纳米管对对硝基苯酚的吸附性能,研究对硝基苯酚在多壁碳纳米管修饰电极上的电化学行为。     

Electrochemical detection of DNA hybridization by using a zirconia modified renewable carbon paste electrode

A simple, polishable and renewable DNA biosensor was fabricated based on a zirconia modified carbon paste electrode. Zirconia was mixed with graphite powder and paraffin wax to produce the paste for the electrode, and response-optimized at 56% graphite powder, 19% ZrO(2) and 25% paraffin wax. An oligonucleotide probe with a terminal 5'-phosphate group was attached to the surface of the electrode via the strong affinity of zirconia for phosphate groups. DNA immobilization and hybridization were characterized by cyclic voltammetry and differential pulse voltammetry, using methylene blue as indicator. Examination of changes in response with complementary or non-complementary DNA sequences showed that the developed biosensor had a high selectivity and sensitivity towards hybridization detection (< or =2x10(-10) M complementary DNA detectable). The surface of the biosensor can be renewed quickly and reproducibly (signal RSD+/-4.6% for five successive renewals) by a simple polishing step.     

替硝唑在碳糊电极上的电化学性质及电分析方法研究

运用循环伏安法(CV)、方波伏安法(SWV)研究替硝唑(TNZ)在碳糊电极(CPE)上的电化学行为、电化学动力学性质及可能的电极反应机理.TNZ在CPE上的伏安行为是一受扩散控制的不可逆电化学还原过程,还原峰电位(Epc)为-0.557 V.用方波伏安法(SWV)测定TNZ线性范围为1.0×10-5～1.0×10h-3mol/L,检出限3.3×10-7mol/L.RSD 1.3%～2.8%,加样回收率99.2%～100.6%.据此建立了TNZ含量的电化学测定方法.     

溴化乙锭标记DNA电化学探针的研究

以乙基-(3-二甲基丙基)碳化二亚胺盐酸盐(EDC)为偶联活化剂,将电化学活性物质溴化乙锭(Ethidiumbromide,EB)成功地标记在人工合成的含有21个碱基的寡聚DNA片段上,制备成EB标记DNA探针;用电化学方法将待测样品DNA片段固定在石墨电极表面,在一定的温度、pH值和离子强度条件下与EB标记DNA探针进行杂交反应,从而对靶序列DNA片段进行识别和测定.此外,还讨论了该探针的电化学性质、荧光光谱、待测DNA片段在石墨电极表面的电化学固定、DNA链碱基长度对EB标记DNA电化学探针的影响以及探针的选择性、重现性和寿命,结果令人满意.     

Organically nanoporous silica gel based on carbon paste electrode for potentiometric detection of trace Cr(III)

A new ion-selective electrode (ISE) for the detection of trace chromium(III) was designed by using 2-acetylpyridine and nanoporous silica gel (APNSG)-functionalized carbon paste electrode (CPE). The presence of APNSG acted as not only a paste binder, but also a reactive material. With 7.5 wt% APNSG proportions, the developed electrode exhibited wide dynamic range of 1.0 × 10⁻⁸ to 1.0 × 10⁻³ M toward Cr(III) with a detection limit of 8.0 × 10⁻⁹ M and a Nernstian slope of 19.8 ± 0.2 mV decade⁻¹. The as-prepared electrode displayed rapid response (∼55 s), long-time stability, and high sensitivity. Moreover, the potentiometric responses could be carried out with wide pH range of 1.5-5.0. In addition, the content of Cr(III) in food samples, e.g. coffee and tea leaves, has been assayed by the developed electrode, atomic absorption spectrophotometer (AAS) and atomic emission spectrometer (ICP-AES), respectively, and consistent results were obtained. Importantly, the response mechanism of the proposed electrode was investigated by using AC impedance and UV-vis spectroscopy.     

Electrochemistry and electrocatalytic activity of polypyrrole/ferrocyanide films on a glassy carbon electrode

Functionalized polypyrrole films were prepared by incorporation of Fe(CN)₆ ³⁻ as doping anion during the electropolymerization of pyrrole at a glassy carbon electrode from aqueous solution. The electrochemical behavior of the Fe(CN)₆ ³⁻/Fe(CN)₆ ⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry. An obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole film with ferrocyanide incorporated was demonstrated by oxidation of ascorbic acid at the optimized pH of 4 in a glycine buffer. The catalytic effect for mediated oxidation of ascorbic acid was 300 mV and the bimolecular rate constant determined for surface coverage of 4.5 × 10⁻⁸ M cm⁻² using rotating disk electrode voltammetry was 86 M⁻¹ s⁻¹. Furthermore, the catalytic oxidation current was linearly dependent on ascorbic acid concentration in the range 5 × 10⁻⁴–1.6 × 10⁻² M with a correlation coefficient of 0.996. The plot of i _p versus v ^1/2 confirms the diffusion nature of the peak current i _p. Received: 12 April 1999 / Accepted: 25 May 1999     

Voltammetric determination of ethinylestradiol at a carbon paste electrode in the presence of cetyl pyridine bromine

Electrochemical behaviors of ethinylestradiol at a carbon paste electrode (CPE) in the presence of cetyl pyridine bromide (CPB) are investigated by electrochemical techniques. Compared with that at a CPE without CPB, the oxidation peak potential of ethinylestradiol shifts negatively and the peak current is increased significantly, due to the enhanced accumulation of ethinylestradiol via electrostatic interaction with CPB at the hydrophobic electrode surface. It is verified by the influences of different kinds of surfactants on the electrochemical signals of ethinylestradiol. Some parameters such as pH, scan rate, accumulation potential and accumulation time on the oxidation of ethinylestradiol are optimized. Under optimal conditions, the oxidation peak current is proportional to ethinylestradiol concentration in the range of 5.0 x 10(-8) to 2.0 x 10(-5) mol L(-1) with a detection limit of 3.0 x 10(-8) mol L(-1) for 150 s accumulation by linear sweep voltammetry (LSV). The proposed procedure is successfully applied to determine ethinylestradiol in pharmaceutical formulation (Levonorgestrel and Etinylestradiol tablets) and the results are satisfying compared with that of high-performance liquid chromatography (HPLC).     

Preparation and characterization of a new carbon paste electrode based on ketotifen–hexacyanoferrate

A new type of carbon paste electrode (CPE) was made using ketotifen fumarate (C₂₃H₂₃NO₅S; an antiasthmatic/antianaphylactic drug) and hexacyanoferrate. This electrode was constructed using an acidic solution of ketotifen fumarate and potassium hexacyanoferrate. For this purpose, ketotifen fumarate was dissolved in acidic solution (pH 1) and hexacyanoferrate was added by agitation, resulting in ketotifen–hexacyanoferrate (Ket–HCF) precipitate. The obtained precipitate was separated and introduced into carbon paste. The electrochemical behavior of Ket–HCF CPE was studied by cyclic voltammetry. A modified electrode shows one pair of peaks with surface-confined characteristics, with a 0.1-M phosphate buffer as supporting electrolyte. The effects of pH, alkali metal cations, and anions of supporting electrolytes on the electrochemical characteristics of modified electrodes were studied. The diffusion coefficients of hydrated K⁺ in film (D), the transfer coefficient (α), and the transfer rate constant for electrons (k _s) were determined.     

Electrochemical studies of determination of C.I. Direct Red 80 based on a gold nanoparticles-modified carbon paste electrode

In this paper, a simple, convenient and sensitive electrochemical method has been developed for the determination of C.I. Direct Red 80. A gold nanoparticle modified carbon paste electrode was fabricated and used for study and sensitive determination of Direct Red 80 by cyclic voltammetry and differential pulse voltammetry. The overall analysis involved a two-step procedure: an accumulation step under open-circuit conditions, followed by voltammetric measurements of Direct Red 80 in a 0.1?M phosphate buffer solution at pH?=?3.0. The experimental conditions, such as the medium, pH and accumulation time, were optimised. The oxidation peak current was proportional to the concentration of Direct Red 80 from 5.0?×?10^?8 to 5.0?×?10^?7?M and 5.0?×?10^?7 to 3.0?×?10^?6?M, and the detection limit was 1.15?×?10^?8?M (S/N?=?3). The proposed method was used to detect Direct Red 80 in natural water and sewage with good accuracy.