Comparative studies of ONNO-based ligands as ionophores for palladium ion-selective membrane sensors

Palladium sensors based on two neutral ionophores, N,N′-bis(acetylacetone) cyclohexanediamine (L₁) and N,N′-bis(o-hydroxyacetophenone)-1,2-cyclohexanediamine (L₂) for quantification of palladium ions are described. Effect of various plasticizers (o-NPOE, DBP, DEP, DOP, TBP, and CN) and anion excluder, sodium tetra phenyl borate (NaTPB) has been studied. The best performance is obtained with a membrane composition of PVC:o-NPOE:ionophore (L₁):NaTPB of 150:300:5:5 (%, w/w). The sensor exhibits significantly enhanced selectivity towards palladium ion over the concentration range 1.0 × 10⁻⁸ to 1.0 × 10⁻¹ M with a lower detection limit of 4.0 × 10⁻⁹ M and a Nernstian compliance (29.1 ± 0.3 mV decade⁻¹ of activity) within pH range 2.0-6.0 and fast response time of 10 s. Influence of the membrane composition and possible interfering ions has also been investigated on the response properties of the electrode. Fast and stable response, good reproducibility and long-term stability of the sensor are demonstrated. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol and acetonitrile and could be used for a period of 4 months. Selectivity coefficients determined with fixed interference method (FIM) indicate high selectivity for palladium. The proposed electrode shows fairly good discrimination of palladium from other cations. The application of prepared sensor has been demonstrated in determination of palladium ions in spiked water sample.     

Synthesis, photophysical and electrophosphorescent properties of mononuclear Pt(II) complexes with arylamine functionalized cyclometalating ligands

Four cyclometalated Pt(II) complexes, i.e., [(L²)PtCl] (1b), [(L³)PtCl] (1c), [(L²)PtCCC₆H₅] (2b) and [(L³)PtCCC₆H₅] (2c) (HL² = 4-[p-(N-butyl-N-phenyl)anilino]-6-phenyl-2,2′-bipyridine and HL³ = 4-[p-(N,N′-dibutyl-N′-phenyl)phenylene-diamino]-phenyl-6-phenyl-2,2′-bipyridine), have been synthesized and verified by ¹H NMR, ¹³C NMR and X-ray crystallography. Unlike previously reported complexes [(L¹)PtCl] (1a) and [(L¹)PtCCC₆H₅] (2a) (HL¹ = 4,6-diphenyl-2,2′-bipyridine), intense and continuous absorption bands in the region of 300-500 nm with strong metal-to-ligand charge transfer (¹MLCT) (dπ(Pt) → π^∗(L)) transitions (ε ∼ 2 × 10⁴ dm³ mol⁻¹ cm⁻¹) at 449-467 nm were observed in the UV-Vis absorption spectra of complexes 1b, 1c, 2b and 2c. Meanwhile, with the introduction of electron-donating arylamino groups in the ligands of 1a and 2a, complexes 1b and 2b display stronger phosphorescence in CH₂Cl₂ solutions at room temperature with bathochromically shifted emission maxima at 595 and 600 nm, relatively higher quantum yields of 0.11 and 0.26, and much longer lifetimes of 8.4 and 4.5 μs, respectively. An electrochromic film of 1b-based polymer was obtained on Pt or ITO electrode surface, which suggests an efficient oxidative polymerization behavior. An orange multilayer organic light-emitting diode with 1b as phosphorescent dopant was fabricated, achieving a maximum current efficiency of 11.3 cd A⁻¹ and a maximum external efficiency of 5.7%. The luminescent properties of complexes 1c and 2c are dependent on pH value and solvent polarity, which is attributed to the protonation of arylamino units in the C^N^N cyclometalating ligands.     

Comparative studies of neodymium (III)-selective PVC membrane sensors

Sensors based on two neutral ionophores, N,N′-bis((1H-pyrrol-2-yl)methylene)cyclohexane-1,2-diamine (L₁) and 3,3′-(cyclohexane-1,2-diylbis(azan-1-yl-1-ylidene)bis(methan-1-yl-1-ylidene)bis(5-hydroxymethyl)pyridine-2-ol) (L₂) are described for quantification of neodymium (III). Effect of various plasticizers; 2-nitrophenyloctylether (o-NPOE), dibutyl butylphosphonate (DBBP), tri-n-butyl phosphates (TBP), dioctylpthalate (DOP) and chloronapthalen (CN) and anion excluder, sodiumtetraphenylborate (NaTPB) has been studied. The membrane composition of PVC:o-NPOE:ionophore (L₁):NaTPB (w/w; mg) of 150:300:5:5 exhibited best performance. The sensor with ionophore (L₁) exhibits significantly enhanced selectivity towards neodymium (III) in the concentration range 5.0 × 10⁻⁷ to 1.0 × 10⁻² M with a detection limit of 1.0 × 10⁻⁷ M and a Nernstian compliance (19.8 ± 0.3 mV decade⁻¹ of activity) within pH range 4.0-8.0. The response time of sensor was found as 10 s. The influence of the membrane composition and possible interfering ions has also been investigated on the response properties of the electrode. The fast and stable response, good reproducibility and long-term stability of the sensor are observed. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients determined by using fixed interference method (FIM) indicate high selectivity for neodymium. The proposed electrode shows fairly good discrimination of neodymium (III) from other cations. The application of prepared sensor has been demonstrated in the determination of neodymium (III) in spiked water samples.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Infinite chains constructed from flexible bis(benzimidazole)-based ligands

Two neutral ligands, L¹ · 2H₂O and L² · H₂O, and seven complexes, [Cu(pmb)₂(L¹)] (1), [Cu(pmb)₂(L²)] (2), [Cu(Ac)₂(L²)] · 4H₂O (3), [Cu(4-aba)₂(L²)] (4), [Ag(4-ts)(L¹)(H₂O)] (5), [Ag₂(epes)₂(L¹)] · 2H₂O (6), [Ag(1,5-nds)_0.5(L²)] · 0.5C₂H₅OH · H₂O (7) [where L¹ = 1,1′-(1,4-butanediyl)bis(2-methylbenzimidazole); L² = 1,1′-(1,4-butanediyl)bis(2-ethylbenzimidazole), pmb = p-methoxybenzoate anion; Ac = acetate anion; 4-aba = 4-aminobenzoate anion; 4-ts = p-toluenesulfonate anion; epes = N-(2-hydroxyethyl)piperazine-N′-(2-ethanesulfonate) anion; 1,5-nds = 1,5-naphthalenedisulfonate anion], have been synthesized and characterized by elemental analysis, IR, and single-crystal X-ray diffraction. The L¹ and L² ligands in compounds 1–7 act as bridging ligands, linking metal ions into chain structures. The chains in compounds 3, 4 and 6 interlace with each other by hydrogen bonds to generate 3D supramolecular structures. In compound 5, π–π interactions between adjacent L¹ ligands hold the chains to a supramolecular layer. In compound 7, the sulfonate anions act as counterions in the framework. The thermal stabilities of 3, 6 and 7, and the luminescent properties for 5–7 in the solid states are also discussed.     

Synthesis, structures and electrochemical properties of ruthenium (II) complexes bearing bidentate 1,8-naphthyridine and terpyridine analogous (N,N,C)-tridentate ligands

1,8-Naphthyridine (napy) and terpyridine-analogous (N,N,C) tridentate ligands coordinated ruthenium (II) complexes, [RuL(napy-κ²N,N′) (dmso)](PF₆)₂ (1: L=L¹=N″-methyl-4′-methylthio-2,2′:6′,4″-terpyridinium, 2: L = L² = N″-methyl-4′-methylthio-2,2′:6′,3″-terpyridinium) were prepared and their chemical and electrochemical properties were characterized. The structure of complex 1 was determined by X-ray crystallographic study, showing that it has a distorted octahedral coordination style. The cyclic voltammogram of 1 in DMF exhibited two reversible ligand-localized redox couples. On the other hand, the CV of 2 shows two irreversible cathodic peaks, due to the Ru-C bond of 2 containing the carbenic character. The IR spectra of 1 in CO₂-saturated CH₃CN showed the formation of Ru-(η¹-CO₂) and Ru-CO complexes under the controlled potential electrolysis of the solution at −1.44 V (vs. Fc/Fc⁺). The electrochemical reduction of CO₂ catalyzed by 1 at −1.54 V (vs. Fc/Fc⁺) in DMF-0.1 M Me₄NBF₄ produced CO with a small amount of HCO₂H.     

Synthesis and electrochemical properties of bis(bipyridine)ruthenium(II) complexes bearing pyridinyl- and pyridinylidene ligands induced by cyclometalation of N′-methylated bipyridinium analogs

Ruthenium complexes with bipyridine-analogous quaternized (N,C) bidentate ligands [RuL(bpy)₂](PF₆)₂ (bpy = 2,2′-bipyridine, (1), L = L¹ = N′-methyl-2,4′-bipyridinium; (2), L = L² = N′-methyl-2,3′-bipyridinium) were synthesized and characterized. The structure of complex 2 was determined by the X-ray structure analysis. The ¹³C{¹H} NMR spectroscopic and cyclic voltammetric studies indicate that the coordination modes of these ligands are quite different, that is, the C-coordinated rings of (N,C)-ligands in 1 and 2 are linked to ruthenium(II) with a pyridinium manner and a pyridinylidene one, respectively. The ligand-localized redox potentials of 1 and 2 also revealed the substantial difference in the electron donating ability of both ligands.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.     

Chromium(III) selective membrane sensors based on Schiff bases as chelating ionophores

The two chromium chelates of Schiff bases, N-(acetoacetanilide)-1,2-diaminoethane (L₁) and N,N′-bis(acetoacetanilide)-triethylenetetraammine (L₂), have been synthesized and explored as neutral ionophores for preparing poly(vinylchloride) (PVC) based membrane sensors selective to Cr(III). The addition of lipophilic anion excluder (NaTPB) and various plasticizers viz. o-Nitrophenyloctyl ether (o-NPOE), dioctylpthalate (DOP), dibutylphthalate (DBP), tris(2-ethylhexyl)phosphate (TEHP), and benzyl acetate (BA) have found to improve the performance of the sensors. The best performance was obtained for the membrane sensor having a composition of L₁:PVC:DBP:NaTPB in the ratio 5:150:250:3 (w/w). The sensor exhibits Nernstian response in the concentration range 8.9 × 10⁻⁸ to 1.0 × 10⁻¹ M Cr³⁺ with limit of detection 5.6 × 10⁻⁸ M. The proposed sensor manifest advantages of relatively fast response (10 s) and good selectivity over some alkali, alkaline earth, transition and heavy metal ions. The selectivity behavior of the proposed electrode revealed a considerable improvement as compared to the best previously PVC-membrane electrode for chromium(III) ion. The potentiometric response of the proposed sensor was independent of pH of the test solution in the range of 2.0-7.0. The sensor has found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol and acetonitrile and could be used for a period of 3 months. The proposed electrode was used as an indicator electrode in potentiometric titration of chromium ion with EDTA and in direct determination in different water and food samples.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Synthesis, characterization and electrochemical behavior of unsymmetric transition metal-terminated biphenyl ethynyl thiols

The synthesis of the biphenyl alkynyl thiols and thioesters R′-CC-C₆H₄-C₆H₄-SR (3: R′ = SiMe₃, R = C(O)Me; 4: R′ = SiMe₃, R = H; 5: R′ = H, R = C(O)Me) from I-C₆H₄-C₆H₄-SC(O)Me (1) is described. Molecules 1 and 5 have been used as starting materials in the synthesis of mono- and heterobimetallic transition metal complexes of type L_nM′-CC-C₆H₄-C₆H₄-SR (7: L_nM′ = Fc, R = C(O)Me; 8: L_nM′ = Fc, R = H; 10: L_nM′ = (Ph₃P)Au, R = C(O)Me; 14: L_nM′ = FcPPh₂-Au, R = C(O)Me; Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe; FcPPh₂ = (η⁵-C₅H₅)(η⁵-C₅H₄PPh₂)Fe). While complex 7is accessible by the Sonogashira cross-coupling of Fc-CCH (6) with 1, molecules 10 and 14 can be prepared by treatment of the thioester 5 with (Ph₃P)AuCl (9) and FcPPh₂-AuCl (13), respectively.The molecular solid state structures of 3, 7, 10 and 13-15 have been determined by single crystal X-ray crystallographic analysis. Typical features of these species are their linear M-CC-C₆H₄-C₆H₄-SR structure and the lack of coplanarity of the biphenyl arene rings. The overall length of these complexes are 13.345(2) Å for 3 (molecule A), 15.146(3) Å for 7, 15.705(2) Å for 10 (molecule A) and 15.649(4) Å for 14. The thioester groups are pointing away from the ferrocene building block. In 7 a linear 1D chain is set-up by π-interactions between two independent molecules of 7. Characteristic for 15 is the formation of a Au₂I₂ ring, while 13 is monomeric.All compounds were studied with cyclic voltammetry. Characteristic are the reversible ferrocene Fe(II)/Fe(III) redox wave, the irreversible reduction of Au(I) to Au(0), the oxidative cleavage of the S-C(O)Me sulfur-carbon (3, 5, 7, 10 and 14) and of the sulfur-hydrogen bond (4 and 8), respectively. Electronic effects extending from the -SH-end group to the ferrocene unit resulting in considerable shifts of the redox potential of the latter entity are found. Coordination of Au(I) at the FcPPh₂ moiety also results in a shift of the redox potential of the ferrocene group indicative of an electron withdrawing effect of the Au(I) species.     

Catalytic efficacy of Schiff-base copper(II) complexes: Synthesis,X-ray structure and olefin oxidation

Three copper(II) Schiff-base complexes, [Cu(L¹)(H₂O)](ClO₄) (1), [Cu(L²)] (2) and [Cu(L³)] (3) have been synthesized and characterized [where HL¹ = 1-(N-ortho-hydroxy-acetophenimine)-2-methyl-pyridine], H₂L² = N,N′-(2-hydroxy-propane-1,3-diyl)-bis-salicylideneimine and H₂L³ = N,N′-(2,2-dimethyl-propane-1,3-diyl)-bis-salicylideneimine]. The structure of complex 1 has been determined by single crystal X-ray diffraction analysis. In complex 1, the copper(II) ion is coordinated to one oxygen atom and two nitrogen atoms of the tridentate Schiff-base ligand, HL¹. The fourth coordination site of the central metal ion is occupied by the oxygen atom from a water molecule. All the complexes exhibit high catalytic activity in the oxidation reactions of a variety of olefins with tert-butyl-hydroperoxide in acetonitrile. The catalytic efficacy of the copper(II) complexes towards olefin oxidation reactions has been studied in different solvent media.     

The (phosphino)tetraphenylborate ligand in ruthenium-arene chemistry

The synthesis of a series of anionic half-sandwich ruthenium-arene complexes [E][RuCl₂(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (E = Bu₄N⁺: R = Ph, 1a, ⁱPr, 1b or Cy, 1c; E = bis(triphenylphosphine)iminium or PNP⁺: R = Ph, 1a′, ⁱPr, 1b′ or Cy, 1c′) are reported. X-ray crystallographic studies of 1a′ and 1b′ confirmed the three-legged piano-stool coordination geometry. In solution, complexes 1a-c and 1a′-c′ are proposed to form monomer-dimer equilibria as a result of chloride ligand dissociation. Complexes 1a-c and 1a′-c′ also form the formally neutral zwitterionic complexes [RuCl(L)(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (L = pyridine: R = Ph, 2a, ⁱPr, 2b or Cy, 2c; L = MeCN: R = Ph, 3a, ⁱPr, 3b or Cy, 3c) via chloride ligand abstraction using AgNO₃ or MeOTf.     

Synthetic and X-ray diffraction studies of borosiloxane cages [R′Si(ORBO)3SiR′] and the adducts of [BuSi{O(PhB)O}3SiBu] with pyridine or N,N,N′,N′-tetramethylethylenediamine

Eleven borosiloxane [R′Si(ORBO)₃SiR′] compounds where R′ = Bu^t and R = Ph (1), 4-PhC₆H₄ (2), 4-Bu^tC₆H₄ (3), 3-NO₂C₆H₄ (4), 4-CH(O)C₆H₄ (5), CpFeC₅H₄ (6), 4-C(O)CH₃C₆H₄ (7), 4-ClC₆H₄ (8), 2,4-F₂C₆H₃ (9), and R′ = cyclo-C₆H₁₁ and R = Ph (10), and 4-BrC₆H₄ (11) have been synthesized and characterized by spectroscopic (IR, NMR), mass spectrometric and, for compounds where R′ = Bu^t and R = 4-PhC₆H₄ (2), 4-Bu^tC₆H₄ (3), 3-NO₂C₆H₄ (4), CpFeC₅H₄ (6) and 2,4-F₂C₆H₃ (9), X-ray diffraction studies. These compounds contain trigonal planar RBO₂ and tetrahedral R′SiO₃ units located around 11-atom “spherical” Si₂O₆B₃ cores. The dimensions of the Si₂O₆B₃ cores in compounds 2, 3, 4, 6 and 9 are remarkably similar. The reaction between [Bu^tSi{O(PhB)O}₃SiBu^t] (1), and excess pyridine yields the 1:1 adduct [Bu^tSi{O(PhB)O}SiBu^t]. NC₅H₅ (12) while the reaction between 1 and N,N,N′,N′-tetramethylethylenediamine in equimolar amounts affords a 2:1 borosiloxane:amine adduct [Bu^tSi{O(PhB)O}₃SiBu^t]₂ · Me₂NCH₂CH₂NMe₂ (13). Compounds 12 and 13 were characterised with IR and (¹H, ¹³C and¹¹B) NMR spectroscopies and the structure of the pyridine complex 12 was determined with X-ray techniques.     

One-dimensional and two-dimensional coordination polymers constructed from copper(II) nodes and polycarboxylato spacers: Synthesis,crystal structures and magnetic properties

Four new coordination polymers were obtained by employing polycarboxylato spacers and cationic copper(II) complexes as nodes: ^∞₂[Cu₃(trim)₂(NH₃)₆(H₂O)₃] (1); ^∞₁[Cu(tmen)(dhtp)] (2), ^∞₁[Cu(tmen)(hitp)(H₂O)] (3), ^∞₁[Cu(tmen)(nitp)] (4). (H₃trim = trimesic acid, H₂dhtp = 2,5-dihydroxy-terephthalic acid; H₂hitp = 5-hydroxy-isophthalic acid, H₂nitp = 5-nitro-isophthalic acid; tmen = N,N,N′,N′-tetramethyl-ethylenediamine). The crystal structures of the four compounds have been solved. Compound 1 consists of 2D coordination polymers with heart-shaped meshes, while compounds 2–4 contain infinite zigzag chains. The role of the hydrogen bond interactions in sustaining the supramolecular solid-state architectures in compounds 1 and 3 is discussed. The cryomagnetic investigation of compounds 1, 2, and 4 reveals antiferromagnetic interactions between the copper ions.     

Heterotrimetallic and heterotetrametallic transition metal complexes

The synthesis of the ruthenium σ-acetylides (η⁵-C₅H₅)L₂Ru-CC-bipy (4a, L = PPh₃; 4b, L₂ = dppf; bipy = 2,2′-bipyridine-5-yl; dppf = 1,1′-bis(diphenylphosphino)ferrocene) is possible by the reaction of [(η⁵-C₅H₅)L₂RuCl] (1) with 5-ethynyl-2,2′-bipyridine (2a) in the presence of NH₄PF₆ followed by deprotonation with DBU. Heterobimetallic Fc-CC-NCN-Pt-CC-R (10a, R = bipy; 10b, R = C₅H₄N-4; Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe; NCN = [1,4-C₆H₂(CH₂NMe₂)₂-2,6]⁻) is accessible by the metathesis of Fc-CC-NCN-PtCl (9) with lithium acetylides LiCC-R (2a, R = bipy; 2b, R = C₅H₄N-4).The complexation behavior of 4a and 4b was investigated.Treatment of these molecules with [MnBr(CO)₅] (13) and {[Ti](μ-σ,π-CCSiMe₃)₂}MX (15a, MX = Cu(NCMe)PF₆; 15b, MX = Cu(NCMe)BF₄; 16, MX = AgOClO₃; [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti), respectively, gave the heteromultimetallic transition metal complexes (η⁵- C₅H₅)L₂Ru-CC-bipy[Mn(CO)₃Br] (14a: L = PPh₃; 14b: L₂ = dppf) and [(η⁵-C₅H₅)L₂Ru-CC-bipy{[Ti](μ-σ,π-CCSiMe₃)₂}M]X (17a: L = PPh₃, M = Cu, X = BF₄; 17b: L₂ = dppf, M = Cu, X = PF₆; 18a: L = PPh₃, M = Ag, X = ClO₄; 18b: L₂ = dppf, M = Ag, X = ClO₄) in which the appropriate transition metals are bridged by carbon-rich connectivities.The solid-state structures of 4b, 10b, 12 and 17b are reported. The main structural feature of 10b is the square-planar-surrounded platinum(II) ion and its linear arrangement. In complex 12 the N-atom of the pendant pyridine unit coordinates to a [mer,trans-(NN′N)RuCl₂] (NN′N = 2,6-bis-[(dimethylamino)methyl]pyridine) complex fragment, resulting in a distorted octahedral environment at the Ru(II) centre. In 4b a 1,1′-bis(diphenylphosphino)ferrocene building block is coordinated to a cyclopentadienylruthenium-σ-acetylide fragment. Heterotetrametallic 17b contains a (η⁵-C₅H₅)(dppf)Ru-CC-bipy unit, the bipyridine entity of which is chelate-bonded to [{[Ti](μ-σ,π-CCSiMe₃)₂}Cu]⁺. Within this arrangement copper(I) is tetra-coordinated and hence, possesses a pseudo-tetrahedral coordination sphere.The electrochemical behavior of 4, 10b, 12, 17 and 18 is discussed. As typical for these molecules, reversible oxidation processes are found for the iron(II) and ruthenium(II) ions. The attachment of copper(I) or silver(I) building blocks at the bipyridine moiety as given in complexes 17 and 18 complicates the oxidation of ruthenium and consequently the reduction of the group-11 metals is made more difficult, indicating an interaction over the organic bridging units.The above described complexes add to the so far only less investigated class of compounds of heteromultimetallic carbon-rich transition metal compounds.     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.     

Selective uranyl ion detection by polymeric ion-selective electrodes based on salphenH2 derivatives

The new ion-selective electrodes (ISEs) based on salphenH₂ derivatives such as N,N′-(propylenedioxy)benzenebis(salicylideneimine) L¹ and N,N′-4,5-(propylenedioxy)benzenebis(3,5-di-tert-butylsalicylideneimine) L² as cation carriers are developed for a uranyl ion. The combination of these new ionophores with tris(2-ethylhexyl)phosphate (TEHP) as a plasticizer particularly shows near Nernstian slope in the wide concentration range (1.0 × 10⁻⁶ to 1.0 × 10⁻² M) of UO₂²⁺ and is observed well in the pH range from 1.0 to 5.0 with a response time less than 20 s. Since the employed ionophores were confirmed to form well-defined stable 1:1 complexes with UO₂²⁺, the observed high selectivity for a uranyl ion over the other cations was attributed to the selective complexation as well as the lipophilic behavior of these ligands especially for L². The proposed electrodes offered practically low detection limit of 6.5 × 10⁻⁷ M and reasonably good end-points within experimental error were obtained when the sensor was used as an indicator electrode for the potentiometric titration.     

Palladium and half sandwich ruthenium(II) complexes of selenated and tellurated benzotriazoles: Synthesis, structural aspects and catalytic applications

1-(Phenylselenomethyl)-1H-benzotriazole (L¹) and 1-(4-methoxyphenyltelluromethyl)-1H-benzotriazole (L²) have been synthesized by reacting 1-(chloromethyl)-1H-benzotriazole with in situ generated nucleophiles PhSe⁻ and ArTe⁻, respectively. The complexes of L¹ and L² with Pd(II) and Ru(II)(η⁶-p-cymene) have been synthesized. Proton, carbon-13, Se-77 and/or Te-125 NMR spectra authenticate both the ligands and their complexes. The single crystal structures of L¹, L² and [RuCl(η⁶-p-cymene)(L)][PF₆] (L = L¹: 3, L = L²: 4) have been solved. The Ru-Se and Ru-Te bond lengths have been found 2.4801(11) and 2.6183(10) Å, respectively. The palladium complexes, [PdCl₂(L)] (L = L¹: 1, L = L²: 2) have been explored for Heck and Suzuki-Miyaura C-C coupling reactions. The TON values are upto 95,000. The Ru-complexes have been found promising for catalytic oxidation of alcohols (TON ∼ 7.8-9.4 × 10⁴). The complexes of telluroether ligands are as efficient catalysts as those of selenoether ones and in fact better for catalytic oxidation.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.