A highly selective fluorescent sensor for Cu based on 2-(2′-hydroxyphenyl)benzoxazole in a poly(vinyl chloride) matrix

This paper describes a copper selective optical chemical sensor based on static quenching of the fluorescence of 2-(2′-hydroxyphenyl)benzoxazole entrapped in a poly(vinyl chloride) (PVC) membrane. The effect of the composition of the sensing membrane was studied, and experimental conditions were optimized. The sensors exhibit stable response over the concentration range from 4.0 × 10⁻⁸ M to 5.0 × 10⁻⁵ M Cu²⁺ at pH 4.0-6.5, and a high selectivity. The response time for Cu²⁺ with concentration ≤5 × 10⁻⁶ M is less than 7 min. The optode can be regenerated using 0.1 M HCl and acetate buffer solution. The sensor has been used for direct measurement of copper content in river water samples with a relative error less than 4% with reference to that obtained by atomic absorption spectrometry.     

A fluorescent chemical sensor for Hg(II) based on a corrole derivative in a PVC matrix

A fluorescent chemical sensor for Hg(II) using 5,10,15-tris(pentafluorophenyl)corrole (H₃(tpfc)) as fluorophore is described in this paper. The response of the sensor is based on the fluorescence quenching of H₃(tpfc) by coordination with Hg(II). H₃(tpfc) based sensor shows a linear response towards Hg(II) in the concentration range from 1.2 × 10⁻⁷ to 1.0 × 10⁻⁴ M, with a working pH range from 5.0 to 8.0. The response time for Hg(II) concentration ≤1.0 × 10⁻⁵ M is less than 5 min. The sensor shows good selectivity for Hg(II) over alkali, and alkaline earth, and most of transition metal cations. The effect of the composition of the sensor membrane has been studied and the experimental conditions optimized. The corrole based sensor membrane can be easily regenerated just by washing with blank buffer solution after each measurement. The sensor has been used for determination of Hg(II) in water samples with satisfactory results.     

A ratiometric fluorescent probe for fluoride ion employing the excited-state intramolecular proton transfer

A ratiometric fluorescent probe 1 for fluoride ion was developed based on modulation of the excited-state intramolecular proton transfer (ESIPT) process of 2-(2′-hydroxyphenyl)benzimidazole (HPBI) through the hydroxyl group protection/deprotection reaction. The probe 1 was readily prepared by the reaction of HPBI with tert-butyldimethylsilyl chloride (TBS-Cl) and shows only fluorescence emission maximum at 360 nm. Upon treatment with fluoride in aqueous DMF solution, the TBS protective group of probe 1 was removed readily and ESIPT of the probe was switched on, which resulted in a decrease of the emission band at 360 nm and an increase of a new fluorescence peak around 454 nm. The fluorescent intensity ratio at 454 and 360 nm (I₄₅₄/I₃₆₀) increases linearly with fluoride ion concentration in the range 0.3-8.0 μmol L⁻¹ and the detection limit is 0.19 μmol L⁻¹. The proposed probe shows excellent selectivity toward fluoride ion over other common anions. The method has been successfully applied to the fluoride determination in toothpaste and tap water samples.     

Monitoring intracellular pH fluctuation with an excited-state intramolecular proton transfer-based ratiometric fluorescent sensor

Intracellular pH is a key parameter related to various biological and pathological processes. In this study, a ratiometric pH fluorescent sensor ABTT was developed harnessing the amino-type excited-state intramolecular proton transfer (ESIPT) process. Relying on whether the ESIPT proceeds normally or not, ABTT exhibited the yellow fluorescence in acidic media, or cyan fluorescence in basic condition. According to the variation, ABTT behaved as a promising sensor which possessed fast and reversible response to pH change without interference from the biological substances, and exported a steady ratiometric signal (I₄₇₈/I₅₄₆). Moreover, due to the ESIPT effect, large Stokes shift and high quantum yield were also exhibited in ABTT. Furthermore, ABTT was applied for monitoring the pH changes in living cells and visualizing the pH fluctuations under oxidative stress successfully. These results elucidated great potential of ABTT in understanding pH-dependent physiological and pathological processes.     

Novel chemosensor for alkaline earth metal ion based on 9-anthryl aromatic amide using a naphthalene as a TICT control site and intramolecular energy transfer donor

Novel fluorescent chemosensors 1 and 2 with two different fluorophores (naphthalene and anthracene) at the both ends of polyether was synthesized. These compounds based on 9-anthryl aromatic amide adopted a naphthalene as a TICT controller and an intramolecular energy transfer source. Compound 1 shows high fluorescence efficiency upon complexation with metal ion, and the fluorescence efficiency of 2 is regulated by metal ionic size.     

A novel ratiometric fluorescent Fe sensor based on a phenanthroimidazole chromophore

Phenanthroimidazole derivative 1 has been developed as a rare example of ratiometric fluorescent sensors for Fe³⁺. Interestingly, upon treatment with Fe³⁺, the sensor displayed a ratiometric fluorescent response with an enhancement of the ratios of emission intensities at 440 and 500 nm from 0.36 to 3.24. The detection range of the sensor for Fe³⁺ is in the 1.0 × 10⁻⁵-1.5 × 10⁻⁴ M concentration range and the detection limit is 5.26 × 10⁻⁶ M. In addition, the sensor showed good selectivity to Fe³⁺ with the selectivity coefficients (KFe3+=SFe3+/S₀) of Fe³⁺ over other metal ions tested in the range of 5-68.     

Novel fluorescent sensor for Ag and Hg based on the BINOL-pyrene derivative via click reaction

A novel BINOL-pyrene derivative sensor 1 for Ag⁺ and Hg²⁺ incorporating the triazole moieties and pyrenes was synthesized via click reaction. Binding of Ag⁺ ion induces the formation of 1:1 Ag⁺-1 chelating complex, and occurs in a ratiometric manner through an enhanced monomer and declining excimer emission, which make it possible to ratiometrically detect Ag⁺. The competitive experiment shows 1 can be used as an Ag⁺ specific fluorescence sensor over a wide range of competing cations. In the meanwhile, the sensor 1 was found to be selectively quenched by only Hg²⁺ at both monomer and excimer emission. Furthermore, we obtained evidences for different fluorescence signaling behaviors with Ag⁺ and Hg²⁺ by ¹H NMR titration experiments.     

A colorimetric chemosensor for fast detection of thiols based on intramolecular charge transfer

A TCNQ-based triphenylamine derivative (1) with strong intramolecular charge transfer (ICT) character was designed as a colorimetric sensor for thiols. Upon addition of thiols, the absorption spectrum of sensor 1 in aqueous solution was remarkably changed because the adduct of 1 with thiol decreased its ICT character. Sensor 1 showed highly selective and sensitive sensing ability toward thiols over other analytes. This selectivity could be easily observed by naked eyes, indicating that sensor 1 is a potential colorimetric sensor for thiols.     

Zinc(II)-selective ratiometric fluorescent sensors based on inhibition of excited-state intramolecular proton transfer

To develop a zinc(II)-selective emission ratiometric probe suitable for biological applications, we explored the cation-induced inhibition of excited-state intramolecular proton transfer (ESIPT) with a series of 2-(2'-benzenesulfonamidophenyl)benzimidazole derivatives. In the absence of Zn(II) at neutral pH, the fluorophores undergo ESIPT to yield a highly Stokes' shifted emission from the proton-transfer tautomer. Coordination of Zn(II) inhibits the ESIPT process and yields a significant hypsochromic shift of the fluorescence emission maximum. Whereas the paramagnetic metal cations Cu(II), Fe(II), Ni(II), Co(II), and Mn(II) result in fluorescence quenching, the emission response is not altered by millimolar concentrations of Ca(II) or Mg(II), rendering the sensors selective for Zn(II) among all biologically important metal cations. Due to the modular architecture of the fluorophore, the Zn(II) binding affinity can be readily tuned by implementing simple structural modifications. The synthesized probes are suitable to gauge free Zn(II) concentrations in the micromolar to picomolar range under physiological conditions.     

Highly Fe selective ratiometric fluorescent probe based on imine-linked benzimidazole

We synthesized a novel benzimidazole-based fluorescent receptor bearing imine linkages with two sets of sp² nitrogens, and investigated its binding properties toward various metal ions. The receptor exhibited a shift in emission band upon binding with Fe³⁺ ions, and no such significant response was noticed in other metal ions. The receptor shows a property of selective ratiometric fluorescent probe of Fe³⁺ ions without interferences of the background metal ions.     

Synthesis and spectral characteristics of two novel intramolecular charge transfer fluorescent dyes

The synthesis and absorption/fluorescence properties of two novel intramolecular charge transfer (ICT) compounds of (fluorene-2-yl)-(9-ethylcarbazole-3-yl) ketene and 1-phenyl-3-(fluorenone-2-yl)-5-(9-ethylcarbazole-3-yl)-2-pyrazoline were reported. The primary structure of the target compounds was characterized by IR and ¹H NMR. The systems contained a fluorenone or a propenon group as an electron acceptor (A) and an N-ethylcarbazole and a pyrazoline group as electron donors (D). From the emissive properties it was concluded that the electronic coupling between D and A was sufficient to allow charge transfer in these molecules. The ICT maximal emission displayed a large wavelength shift and Stokes shifts increased in response to the increase of the solvent polarity. The highly solvatochromic properties made the two compounds of great interest as new classes of fluorescent probes, electroluminescent and electrofax materials.     

A fluorescent sensor for Hg and Ag functions as a molecular switch based on click-generated triazole moiety

The novel (S)-BINOL-based sensor 1 incorporating triazole moieties could be obtained by click reaction. The results show that 1 can exhibit excellent fluorescence response behaviors toward Hg²⁺ (selective switching-off) and Ag⁺ (selective switching-on) without interference from other metal ions, which functions as a molecular switch. This work can expand the application of click reaction in design and synthesis of the novel fluorescence sensor molecules.     

An ultrasensitive iron(III)-complex based hydrogen peroxide electrochemical sensor based on a nonelectrocatalytic mechanism

In this communication, the first nonelectrocatalysis-type hydrogen peroxide electrochemical sensor is reported. The electroactive iron(III) diethylenetriaminepentaacetic acid (DTPA-Fe^III) complex is immobilized on the cysteamine (cys) modified nanoporous gold (NPG) films by covalent method. The immobilized DTPA-Fe^III complex quickly communicates an electron with the electrode. Upon addition of hydrogen peroxide, however, hydrogen peroxide inhibits the direct electron transfer of the DTPA-Fe^III complex due to the generation of nonelectroactive DTPA-Fe^III–H₂O₂ complex. Based on quenching mechanism, the first hydrogen peroxide electrochemical sensor based on a nonelectrocatalytic mechanism is developed. The novel hydrogen peroxide electrochemical sensor has the ultralow detection limit (1.0 × 10^–14 M) and wide linear range (1.0 × 10^–13 to 1.0 × 10^–8 M) with excellent reproducibility and stability.     

A fluorescent sensing membrane for iodine based on intramolecular excitation energy transfer of anthryl appended porphyrin

A single anthryl appended meso-tetraphenylporphyrin (TPP) dyad has been synthesized and applied in fluorescence sensing of iodine based on the intramolecular excitation energy transfer. The molecular recognition of the sensor is based on the interaction of iodine with inner anthracene moiety of the dyad, while the signal reporter for the recognition process is the TPP fluorescence quenching. Because the emission spectrum of anthracene is largely overlapped with the Soret band absorption of TPP, intramolecular excitation energy transfer interaction occurs between the donor, anthracene and acceptor, TPP. This energy transfer leads to TPP fluorescence emission by excitation of anthracene. The sensor was constructed by immobilizing the dyad in a plasticized poly(vinyl chloride) (PVC) membrane. The sensing membrane shows higher sensitivity compared to the sensors by using anthracene, TPP, or a mixture of anthracene and TPP as sensing materials. Under the optimum conditions, iodine in a sample solution can be determined from 2.04 to 23.6 mmol·L⁻¹ with a detection limit of 33 nmol·L⁻¹. The sensing membrane shows satisfactory response characteristics including good reproducibility, reversibility and stability, as well as the short response time of less than 60 s. Except for Cr₂O₇²⁻ and MnO₄⁻, other common metal ions and anions in foodstuff do not interfere with iodine determination. The proposed method was applied in the determination of iodine in table salt samples. The results agree well with those obtained by other methods. Supported by the National Outstanding Youth Science Foundation of China (Grant No. 20525518), the National Natural Science Foundation of China (Grant No. 20775005), and the National Natural Science Foundation of Hunan province (Grant No. JJ076021)     

A highly selective fluorescent sensor for Ca2+ and Sr2+ based on diarylethene with a furan-carbohydrazide unit

A fluorescent sensor based on diarylethene has been designed and synthesized. The sensor not only exhibited excellent photochromic properties, but also has distinguishing ability for Ca²⁺ and Sr²⁺ from other metal ions. Upon addition of Ca²⁺ and Sr²⁺, its emission intensity enhanced 27-fold and 24-fold respectively, accompanied by the emission peak shifted from 439 nm to 484 nm for Ca²⁺, and to 479 nm for Sr²⁺. The 1:1 stoichiometry between the sensor and the two ions was confirmed by Job's plot and HRMS. The LOD for Ca²⁺ and Sr²⁺ was determined to be 9.4 × 10^?8 mol L^?1 and 7.2 × 10^?8 mol L^?1, respectively. Furthermore, the sensor was applied in the detection of Ca²⁺ and Sr²⁺ in practical samples successfully.     

A fluorescent sensor based on quinazoline ketone derivatives for selectivity of Fe3+

In this work, we provided a fluorescent sensor based on a compound containing fluorophore quinazoline ketone for detecting metal ions. 2-Methyl-4(3 H)-quinazoline thione was synthesised as a fluorescent probe for tervalent ferric ion (Fe³⁺) detection. Fluorescent determination of 2-methyl-4(3 H)-quinazoline thione indicated its maximum emission wavelength of 306.5 nm. The fluorescence interference and titration experiments have shown that the compound has a high selective fluorescence response to Fe³⁺. With an increase in the Fe³⁺ ion concentration, the fluorescence emission strength gradually weakened, and a slight red shift appeared. With Job’s method, 2-methyl-4(3 H)-quinazoline thione was proved to form a 1:2 complex with Fe³⁺. The results revealed that 2-methyl-4(3 H)-quinazoline thione could be used as a fluorescent probe for the recognition of Fe³⁺ with high selectivity.     

A fluoran-based fluorescent probe via a strategy of blocking the intramolecular photoinduced electron transfer (PET) process

A novel fluoran-based fluorescent probe 2 has been designed and synthesized by using a strategy of blocking the intramolecular photoinduced electron transfer (PET) process. The probe keeps a ring-closed spirolactone structure in aqueous buffer solution. However, the oxidation of the probe by ClO^? perturbs a new equilibrium of the structural interconversion between the nonfluorescent spirolactone and the fluorescent ring-opened zwitterion, which generates a highly selective fluorescent probe for ClO^?. Meanwhile, the probe is cell membrane permeable and can be utilized as fluorescent probe for imaging ClO^? in living cells.     

基于分子内荧光能量转移的碘聚合膜荧光传感器

合成了基于分子内荧光能量转移的蒽（An）-四苯基卟啉（TPP）双发色团碘荧光探针1．由于An的荧光光谱与TPP的S吸收带具有较好的重叠,供体An与受体TPP之间可以发生有效的分子内荧光能量转移,以An的最大吸收波长作为激发波长时,由于分子内荧光能量转移,受体TPP发出荧光．当碘与探针分子中的识别基团An作用时,导致探针分子的荧光转导基团TPP荧光淬灭．与An、TPP和An＋TPP混合物作敏感材料相比,将探针1固定在PVC膜中制备的敏感膜对碘选择性高、灵敏度好．另外,敏感膜具有很好的重现性、可逆性和稳定性,响应时间小于60S．除Cr2O7^2-和MnO4^-外,食品中常见的无机离子和可能存在的干扰物质不影响碘的测定．在最优条件下,传感器的线性范围为2．04×10^-6-2．36×10^-2mol／L,检出限为3．30×10^-8mol／L．本方法应用于加碘食盐中碘含量的测定,结果满意．     

A selective colorimetric chemosensor for thiols based on intramolecular charge transfer mechanism

Compound 1 as an electron donor-acceptor compound with N,N-dimethylaniline and quinone units was designed for a highly selective colorimetric determination of thiol-containing amino acids and peptides, by making use of the unique reactivity of thiol towards quinone. Compound 1 shows a strong intramolecular charge transfer (ICT) band around 582 nm; but, it decreased after addition of either cysteine (Cys) or glutathione (GSH). Moreover, the ICT band intensity at 582 nm decreased linearly with the increasing concentrations of Cys or GSH. The interference from other amino acids can be neglected. Therefore, compound 1 can be employed as a selective colorimetric visual chemosensor for thiol-containing amino acids and peptides.     

Kinetics of proton transfer in a green fluorescent protein: A laser-induced pH jump study

The sub-millisecond protonation dynamics of the chromophore in S65T mutant form of the green fluorescent protein (GFP) was tracked after a rapid pH jump following laser-induced proton release from the caged photolabile compoundo-nitrobenzaldehyde. Following a jump in pH from 8 to 5 (which is achieved within 2 μs), the fluorescence of S65T GFP decreased as a single exponential with a time constant of ∼90 μs. This decay is interpreted as the conversion of the deprotonated fluorescent GFP chromophore to a protonated non-fluorescent species. The protonation kinetics showed dependence on the bulk viscosity of the solvent, and therefore implicates bulk solvent-controlled protein dynamics in the protonation process. The protonation is proposed to be a sequential process involving two steps: (a) proton transfer from solvent to the chromophore, and (b) internal structural rearrangements to stabilize a protonated chromophore. The possible implications of these observations to protein dynamics in general is discussed