Calix[4]arene stabilized Transition Metal Imido Complexes

The usage of calix[n]arenes as ancillary poly(phenolate) ligands is a rapidly developing area in coordination chemistry. This article focuses on the synthesis, structure and reactivity of calix[4]arene‐ and calix[4]arene ether‐stabilized imido complexes of group 4 — 6 transition metals as well as on the comparison of calix[4]arene dialkyl ethers in particular with other widely employed related ligand systems such as salenes, porphyrins and tetraazaannulenes. Contrary to these nitrogen containing systems, it is much easier to control the charge of the ligand system through the degree of alkylation of the calixarene's lower rim without a major change in the geometry of the resulting metal complex. This could lead to isoelectronic and structurally closely related transition metal complex fragments for metals in neighboring groups of the periodic table or for metals in different oxidation states. The “intrinsic” reactivity of metal imido linkages might therefore be explored using calix[4]arenes and calix[4]arene ethers and first results are summarized in this research report.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Sorption of heavy metal ions by silica gel-immobilized, proton-ionizable calix[4]arenes

Silica gel-immobilized, di-ionizable calix[4]arenes are employed as stationary phases in ion-exchange chromatography for selected heavy metal ions. Sorption efficiencies for Pb²⁺ are dependent on the structure of the calix[4]arene ligand and the linker that joins the ligand to the silica gel, as well as the acidity of the sample solution. Although the resins exhibit only poor sorption of Cd²⁺, they are found to be scavengers for Hg²⁺. Competitive sorption studies are conducted with selected resins.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

A novel calix[4]arene fluorescent receptor for selective recognition of acetate anion

A novel bridged fluorescent calix[4]arene with 1,8-diaminoanthracene and glycine at the upper rim has been prepared, which exhibited selective recognition towards AcO⁻ over other anions such as F⁻, Cl⁻, Br⁻, , , I⁻ and by fluorescence spectroscopy and ¹H NMR method.     

Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.     

单炔基桥联双杯[4]芳烃的合成与对溶剂分子的包合性能

对叔丁基杯[4]芳烃直接与1,4-二氯-2-丁炔反应,一步制备了单炔基单桥联双杯[4]芳烃和单炔基双桥联双杯[4]芳烃,并证实单桥联双杯[4]芳烃是双桥联双杯[4]芳烃的中间产物.经¹HNMR,¹³CNMR和ESI-MS分析证实了产物的结构.ESI-MS结果表明两种产物对DMF和H₂O有不同的包合能力.     

Improvement of selective d-cation binding by tetrathiacalix[4]arene hydrazides: synthesis and extraction properties

New de-tert-butyltetrathiacalix[4]arenes with acetylhydrazide substituents in cone and 1,3-alternate conformations have been synthesised with good yield by the hydrazinolysis of calix[4]arene ester derivatives. The recognition ability of synthesised macrocycles towards transition and alkali metals has been investigated by the picrate extraction method. The stoichiometry of complexes and the extraction constants have been determined. It has been found that tetrahydrazides do not extract alkali metal ions, but show an excellent affinity towards transition and heavy metal cations. The 1,3-alternate conformer of de-tert-butyltetrathiacalix[4]arene has revealed a remarkable selectivity for Ni²⁺ and Ag⁺ in the row of d-elements and for Cd²⁺ ion among the toxic heavy metals. The experimental data show that the removal of tert-butyl groups from tetrathiacalix[4]arene framework leads to the drastic improvement of extraction efficiency and selectivity of new tetrahydrazides.     

The selective preparation of partial cone O-aryl calix[4]arene ethers from 1,3-dimethoxycalix[4]arene: a new platform for the preparation of non-aggregated dyes

We report a new direct route for the selective preparation of novel partial cone O-aryl ether calix[4]arenes to be used as new platforms for the preparation of non-aggregated dyes. These partial cone conformers have the aromatic substituents lying within the calix[4]arene annulus via the upper rim.     

Thiocalix[4] arenes. I. Synthesis and structure of ethylthiocalix[4]arene methyl ether and the related structure of bromocalix[4]arene methyl ether

Bromocalix[4]arene methyl ether serves as a precursor in the synthesis of the title thiocalixarene via the reagent CuSEt. Ethylthiocalix[4]arene methyl ether crystallizes in the monoclinic space groupP2₁/c witha = 20.577(9),b, = 10.722(5),c = 20.315(9) Å, = 120.46(4)°, andD _c = 1.24 g cm^–3 forZ = 4. Refinement based on 1441 observed reflections led toR = 0.080. The configuration of the calixarene lies between the partial cone and the 1,3-altemate conformations. Bromocalix[4]arene methyl ether crystallizes in the triclinic space groupPI witha = 12.283(7),b = 17.658(9),c = 18.118(6) Å, = 90.25(6), = 105.95(4), = 105.11(6)°, andD _c = 1.68 g cm^–3 forZ = 4. Refinement based on 3028 observed reflections led toR = 0.083. The unit cell also contains four CHCl₃ molecules which exist pairwise enclathrated by six calixarenes. The partial cone conformation of the bromocalixarene is identical to that of ethylthiocalix[4]arene methyl ether.     

Liquid-liquid extraction of transition and alkali metal cations by a new calixarene: Diphenylphosphino calix[4]arene methyl ether

The liquid-liquid extraction of various metal ions by a diphenylphosphino calix[4]arene (1) using picrate counter ion has been studied and compared with those ofp-tert-butyl-calix[4]arene methyl ether (2) and triphenylphosphine (3). The calixarene 1 shows strong binding ability to almost all metal cations examined, but calixarene 2 shows little ability to extract any of them. Based on the continuous variation method, calixarene 1 formed 1: 2 complexes with copper(II) ion.     

Synthesis of a novel calix[4]arene-based fluorescent ionophore and its metal ions recognition properties

A novel fluorescent ionophore derived from calix[4]arene and pyrazoline was designed and synthesized. Its molecular structure was confirmed by 1H NMR and element analysis. The resulting material shows specific fluorescent behavior toward the Zn2+ ion among the other divalent metal ions, such as Co2+, Ni2+, Cu2+. The primary results indicate this ionophore material is a potential material for developing efficient fluorescent Zn2+ chemosensors.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Highly selective fluorescent sensing of Pb by a new calix[4]arene derivative

A new chemosensor was synthesized by the alkylation of p-tert-butyl-calix[4]arene with three N,N-diethylacetamide groups and one methyl 3-ethoxy-naphthalene-2-carboxylate, which exhibited highly selective fluorescent response to Pb²⁺ over alkali, alkali earth metal ions and some transition metal ions in CH₃CN-H₂O.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

杯[4]芳烃衍生物的合成和构象研究

以对取代酚亚甲基桥三聚体和２，６－二溴甲基对取代酚为原料，在ＴｉＣｌ４催化下环化得到６种新的含不同取代基［Ｃｌ，Ｂｒ，ＣＨ３，Ｃ（ＣＨ３）３］的杯［４］芳烃衍生物，核磁共振谱研究表明：它们在溶液中的优势构象为锥形构象。     

Comparative study of calix[4]arene derivatives: implications for ligand design

The first comparative theoretical study of three parent calix[4]arene analogues (calix[4]arene, thiacalix[4]arene, and homooxacalix[4]arene) has been performed using molecular dynamic simulations and density functional theory (MPWB1K/6-311G^∗∗//B3LYP/6-311G^∗∗) methods. The theoretical observations herein including optimized geometry, polarity, and atomic charge data provide that homooxacalix[4]arene would offer more efficient platform for metal ion recognition compared to thiacalix[4]arene or calix[4]arene.     

Synthesis and structures of malonate derivative-calix[4]arene conjugates

A series of novel malonate derivatives-calix[4]arene conjugates were synthesized through Knoevenagel condensation reaction, and the structures of these functionalized calix[4]arenes have been determined     

Calix[4]arene Polyaza Derivatives: Novel Effective Neutral Receptors for Cations and (a)-Amino Acids

Introduction Calixarenes are one of the most important supramolecular building blocks, which can be modified by introducing different functional and/or structrual groups to create a specific interaction between the host and the target molecules, such as metal cations and small organic molecules[1,2]. In particular, the recognition of amino acids is an interesting theme in biomimetic chemistry[3].     

A phenanthrene-based calix[4]arene as a fluorescent sensor for Cu and F

A new phenanthrene-based fluorescent calix[4]arene (4) has been synthesized in cone conformation. This compound was examined for its fluorescent properties towards different metal ions (Na⁺, Li⁺, Mg²⁺, Ni²⁺, Ba²⁺, Ca²⁺, Cu²⁺, Pb²⁺) and anions (F⁻, Cl⁻, Br⁻, H₂₄PO⁻,${{\text{H}}_2{\text{PO}}_4}^{-}\text{,}$₃NO⁻,${{\text{NO}}_3}^{-}\text{,}$₄HSO⁻,${{\text{HSO}}_4}^{-}\text{,}$ CH₃COO⁻) by fluorescence spectroscopy. The properties of the compound were evaluated and show that it is a fluorescence sensor for Cu²⁺ and F⁻. With the addition of Cu²⁺ and F⁻, the fluorescence was severely quenched.