Arsenic fractionation in agricultural soil using an automated three-step sequential extraction method coupled to hydride generation-atomic fluorescence spectrometry

A fully automated modified three-step BCR flow-through sequential extraction method was developed for the fractionation of the arsenic (As) content from agricultural soil based on a multi-syringe flow injection analysis (MSFIA) system coupled to hydride generation-atomic fluorescence spectrometry (HG-AFS). Critical parameters that affect the performance of the automated system were optimized by exploiting a multivariate approach using a Doehlert design. The validation of the flow-based modified-BCR method was carried out by comparison with the conventional BCR method. Thus, the total As content was determined in the following three fractions: fraction 1 (F1), the acid-soluble or interchangeable fraction; fraction 2 (F2), the reducible fraction; and fraction 3 (F3), the oxidizable fraction. The limits of detection (LOD) were 4.0, 3.4, and 23.6 μg L⁻¹ for F1, F2, and F3, respectively. A wide working concentration range was obtained for the analysis of each fraction, i.e., 0.013–0.800, 0.011–0.900 and 0.079–1.400 mg L⁻¹ for F1, F2, and F3, respectively. The precision of the automated MSFIA–HG-AFS system, expressed as the relative standard deviation (RSD), was evaluated for a 200 μg L⁻¹ As standard solution, and RSD values between 5 and 8% were achieved for the three BCR fractions. The new modified three-step BCR flow-based sequential extraction method was satisfactorily applied for arsenic fractionation in real agricultural soil samples from an arsenic-contaminated mining zone to evaluate its extractability. The frequency of analysis of the proposed method was eight times higher than that of the conventional BCR method (6 vs 48 h), and the kinetics of lixiviation were established for each fraction.     

Automated quantitative and isotopic (13C) analysis of dissolved inorganic carbon and dissolved organic carbon in continuous-flow using a total organic carbon analyser

A method for the automated (13)C analysis of dissolved inorganic and organic carbon species has been developed to operate on a continuous-flow isotope ratio mass spectrometer (CF-IRMS). For natural and anthropogenic carbon species, the (13)C stable isotope has proven to be an excellent environmental tracer. Analytical performance tests were carried out on various organic compounds from easily oxidisable (sugar) to difficult (humic acid). A set of natural samples was also analysed to confirm the flexibility of the system. Analytical precision (2sigma) is typically <0.20 per thousand with sample reproducibility from 0.10-0.35 per thousand depending on reactivity of material. We believe this to be the first successful use of a total organic carbon (TOC) analyser for both dissolved inorganic and, specifically, dissolved organic species for (13)C stable isotope analysis in an automated CF-IRMS system. Routine analysis is achieved fairly quickly, is relatively simple with little or no sample manipulation, and will allow new and exciting studies for stable isotope research in both natural abundance and organic tracer studies not easily achieved before.     

Determination of iron(II) and total iron in environmental water samples by flow injection analysis with column preconcentration of chelating resin functionalized with N-hydroxyethylethylenediamine ligands and chemiluminescence detection

A flow injection analysis (FIA) technique for the determination of Fe(II) and total-Fe in environmental water samples has been developed with a high sensitivity. The resin used for preconcentration of iron was the macroporous resin, Amberlite XAD-4 functionalized by N-hydroxyethylethylenediamine (HEED) groups. The technique employed was FIA by combination of on-line chelate resin preconcentration and chemiluminescence detection (CL), using brilliant sulfoflavine and hydrogen peroxide reagent solutions. The interference by coexisting Fe(III) could be eliminated by addition of 1×10⁻⁶ mol of deferrioxamine B solution. The detection limits of Fe(II) and total-Fe were 0.80 and 0.36 nmol l⁻¹ for 5.6-ml seawater samples with a concentration of 2 nmol l⁻¹. The relative standard deviations for both samples were less than ±4%. A typical analysis for Fe(II) can be performed in 7.5 min. The technique was ascertained by comparing the analytical value of total-Fe with the certified value of Fe in the reference standard seawater CASS-3.     

Amberlite XAD-4 functionalized with m-phenylendiamine: Synthesis, characterization and applications as extractant for preconcentration and determination of rhodium (III) in water samples by Inductive Couple Plasma Atomic Emission Spectroscopy (ICP-AES)

A new chelating resin is prepared by coupling Amberlite XAD-4 with metaphenylendiamine through an azo spacer, characterized (elemental analysis, IR and thermogravimetric analysis (TGA)) and studied for preconcentration Rh (III) using Inductive Couple Plasma Atomic Emission Spectroscopy (ICP-AES) for rhodium monitoring. The optimum pH value for sorption of the metal ion was 6.5 (recovery 100%). The sorption capacity was found 0.256 mmol g^− 1 of resin for Rh (III). The method has a detection limit and limit of quantification of 0.05 and 0.08 μg mL^− 1 at pH 6.5, respectively. The chelating resin can be reused for 10 cycles of sorption-desorption without any significant change in sorption capacity. A recovery of 100% was obtained for the metal ion with 1.5 M HCl as eluting agent. The equilibrium adsorption data of Rh (III) on modified resin were analyzed by Langmuir and Freundlich models. Adsorption data were modeled using the pseudo-first-order, pseudo-second-order and intra-particle diffusion kinetics equations. Isotherms have also been used to obtain the thermodynamic parameters such as free energy, enthalpy and entropy of adsorption. The positive value of the enthalpy change (2.48 kJ/mol) indicates that the adsorption is an endothermic process. The method was applied for rhodium ions determination from tap water sample.     

Remarks on the measurement of the total organic carbon (TOC) in water at lower levels

Summary The question, whether measurements of TOC-values in the lower ppm range in water have any sense, is discussed. Analytical parameters, like the lack of standards, the natural CO₂-blank, the influence of large amounts of water vapour on the quantitative combustion, the possibility of extrapolation of calibration graphs, the catalyst efficiency and the final measurement, are critically examined.

---

Bemerkungen zur Messung von niedrigen Werten des Gesamtgehaltes an organischem Kohlenstoff (TOC) in Wasser

Zusammenfassung Es wird die Frage diskutiert, ob das Messen von TOC-Werten im Bereich von weniger als einigen ppm Sinn hat. Die Fragwürdigkeit einer solchen Messung wird an Hand einiger Analysenparameter erörtert, nämlich: Abwesenheit von Standardproben, natürlicher CO₂-Blindwert, Einfluß von großen Mengen Wasserdampf auf eine quantitative Verbrennung, Möglichkeit zur Extrapolation von Eichgeraden, Wirkung von Katalysatoren und Ermittlung der Analysenergebnisse.

     

A novel single-run dual temperature combustion (SRDTC) method for the determination of organic, in-organic and total carbon in soil samples

The quantification of organic (OC) and inorganic carbon (IC) in soils provides an essential tool for understanding biogeochemical processes. Examples of its potential application are the assessment of the humification degree of soil organic matter, the calculation of carbon fluxes and budgets in terrestrial systems on a regional and global scale and the investigation of the carbon storage potential of soils. The verification of changes in carbon stocks requires an extensive number of samples as well as precise and reliable analyses.Due to the wide variation in the concentrations of the two forms of carbon in solid samples, the exact distinction is very difficult. We present the advantages of a single-run dual temperature combustion method (SRDTC) at 515 °C for OC and 925 °C for IC, which allows the determination of OC, IC and total carbon (TC) within one single analytical run. The three parameters are analyzed in less than 30 min. Additionally, the method is characterized by a significantly reduced variability and low operator bias, as there is no need of chemical sample pre-treatment. It is applicable to a broad range of varying OC and IC contents, which is demonstrated by the use of numerous synthetic soil mixtures that have been analyzed. Furthermore, SRDTC indicates the presence of thermally instable carbonates, like magnesite, in the sample. Use of silver boats as a catalytic agent results in an improved distinction between OC and IC in this case. To examine the accuracy and reliability of the SRDTC method, it was compared to other techniques frequently used for carbon determination in soil samples: total combustion by elemental analysis to determine TC and acidification of the sample prior to combustion to determine OC. We will show that the rugged SRDTC method offers a substantial progress for both the reliable and rapid OC and IC determination in soil samples where elemental carbon is negligible.     

Azocalix[4]pyrrole Amberlite XAD-2: New polymeric chelating resins for the extraction, preconcentration and sequential separation of Cu(II), Zn(II) and Cd(II) in natural water samples

Two novel azocalix[4]pyrrole Amberlite XAD-2 polymeric chelating resins were synthesized by covalently linking diazotized Amberlite XAD-2 with calix[4]pyrrole macrocycles. The chelating resins were used for extraction, preconcentration and sequential separation of metal ions such as Cu(II), Zn(II) and Cd(II) by column chromatography prior to their determination by UV/vis spectrophotometry or flame atomic absorption spectrophotometry (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES). Various parameters such as effect of pH on absorption, concentration of eluting agents, flow rate, total sorption capacity, exchange kinetics, preconcentration factor, distribution coefficient, breakthrough capacity and resin stability, were optimized for effective separation and preconcentration. The resin showed good ability for the separation of metal ions from binary and ternary mixture on the basis of pH of absorption and concentration of eluting agents. The newly synthesized resins showed good potential for trace enrichment of Cu(II), Zn(II) and Cd(II) metal ions, especially for Cu(II), as compared to the earlier reported resins. The synthesized resins were recycled at least 8-10 times without much affecting column sorption capacity. The presented method was successfully applied for determination of Cu(II), Zn(II) and Cd(II) in natural and ground water samples.     

吉林省主要旱田土壤有机碳·氮和碳氮比的空间分布特征

土壤中的有机碳和全氮是评定土壤肥力的关键因素,快速准确测定土壤中的有机碳和全氮对于评价土壤肥力、研究碳氮与植物生长代谢关系、进一步提高作物产量与质量有重要的意义. 针对目前土壤中有机碳和全氮测量时间长、批量测试效率低的问题,采用红外吸收-热导法同时测定土壤中有机碳和全氮的含量,进一步提高了分析效率. 讨论了样品量、燃烧催化剂、无机碳干扰对有机碳和全氮测定的影响. 结果表明,试验最优条件为样品质量0.12 g,0.04 g氧化铜为燃烧催化剂,4 mol/L盐酸消除无机碳干扰. 以土壤标准样品建立仪器标准曲线,碳和氮的定量限分别为0.008 2%、0.043%. 方法应用于实际土壤样品测量,方法精密度小于3.0%,测量结果与标准方法对比,测量值在标准允许误差范围内.

     

Determination of water,ammonium nitrate and sodium nitrate content in ‘water-in-oil’ emulsions using TG and DSC

The main component of an emulsion explosive is a water-in-oil emulsion consisting of a supersaturated ammonium nitrate (AN) water phase, finely dispersed in an oil phase. Quantitative determination of nearly all the components in a W/O emulsion is possible using thermogravimetry (TG) and differential scanning calorimetry (DSC). Isothermal TG measurements enable determination of water content, while cycled DSC measurements allow the amount of ammonium nitrate to be determined. In the case that sodium nitrate (SN) is also added to AN as an oxidizing agent, it is necessary to quantitatively separate both salts from organic matter with diethyl ether. On the basis of the TG curve of the precipitated salts, the amount of AN can then be calculated, and that of SN is obtained from TG measurement of the original sample.     

Validation of QuEChERS-based UPLC-MS/MS method for determination of quinoid niclosamide (LDS) residue in water,soil and rice samples

A sensitive, rapid and easy analytical method was validated for the determination of quinoid niclosamide (LDS) molluscicide in water, rice and soil using a QuEChERS extraction procedure and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) detection. The LDS was extracted by using acetonitrile and then cleaned up by using dispersive solid-phase extraction with florisil and C18 sorbents. The determination of the target compound was achieved in less than 3 min using an electrospray ionisation source in negative mode. The overall average recoveries for this method in water, rice and soil matrix at three fortified levels ranged from 82.54 to 99.9%, with relative standard deviations in the range of 1.51 to 4.86% (n = 5). The calculated limits of detection were lower than 0.1 µg kg^?1 and quantification was 5 µg kg^?1; these values were much lower than the maximum residue levels established by the Australian standard (0.01 mg kg^?1). The results of the method validation confirmed that this proposed method is convenient and reliable for the determination of LDS molluscicide in water, rice and soil samples.     

Spectrofluorimetric determination of total amount of nitrite and nitrate in biological sample with a new fluorescent probe 1,3,5,7-tetramethyl-8-(3',4'-diaminophenyl)-difluoroboradiaza-s-indacence

A new synthesized fluorescent probe, 1,3,5,7-tetramethyl-8-(3′,4′-diaminophenyl)-difluoroboradiaza-s-indacence (TMDABODIPY), has been used to detect nitrite. When TMDABODIPY reacted with nitrite, a weak fluorescent triazole formed in 0.2 mol l⁻¹ HCl medium at room temperature. The fluorescence quenching intensity was linear over a nitrite concentration of 0.04–0.32 μmol l⁻¹ with a detection limit of 0.3 nmol l⁻¹ (S/N=3). The proposed method has been applied to the determination of total amount of nitrite and nitrate (reduced by Zn powder) in human serum and urine of health and hypertension persons with recoveries of 91.83–101.80%.     

A preliminary investigation of total organic carbon variation in influent and effluent of Isfahan (Iran) water treatment plant, urban network and Fellman wells

In this work a series of total organic carbon (TOC) analyses were carried out to analyse the influent and the effluent of a water treatment plant providing Isfahan city in Iran. Other analyses were focused on the determination of TOC in the urban network and Fellman wells (in Isfahan and Dehaghan cities), in order to compare the water quality soon after the treatment with that of circulating water in the city network. Since it supplies water treatment plant, TOC content of Zayandehrood River was also compared with the treated water. The obtained results revealed that there were significant differences between TOC content of effluent of water treatment plant and that of the urban network (made with eight different points). In this project all the samples were withdrawn during 2005. It is worth noting that the analyses were carried out with a high precision combustion-infrared method with a confidence limit lower than 0.05. The mean of TOC in Isfahan and Dehaghan Fellman wells were 0.7 and 2.6 mg.l(-1), respectively. The mean of TOC in influent of water treatment plant during June, July and September were 0.703, 1.148, 1.513 mg.l(-1) respectively which after treatment process reduced to about 0.7 mg.l(-1). In conclusion it can be said that during the summer with higher consumption of water and increase in vaporizing surface waters, we have accumulation of organic compounds and therefore we have increase in TOC content of various waters.     

Development of a single‐run analytical method for the detection of ten multiclass emerging contaminants in agricultural soil using an acetate‐buffered QuEChERS method coupled with LC–MS/MS

This study was undertaken to develop and validate a single multiresidue method for the monitoring of ten multiclass emerging contaminants, viz. ceftiofur, clopidol, florfenicol, monensin, salinomycin, sulfamethazine, sulfathiazole, sulfamethoxazole, tiamulin, and tylosin in agricultural soil. Samples were extracted using an acetate‐buffered, modified quick, easy, cheap, effective, rugged, and safe method followed by liquid chromatography with tandem mass spectrometric analysis in positive ion mode. Separation on an Eclipse Plus C₁₈ column was conducted in gradient elution mode using a mobile phase of methanol (A) and distilled water (B), each containing 0.1% formic acid and 5 mM ammonium formate. The linearity of the matrix‐matched calibrations, expressed as determination coefficients, was good, with R ² ≥ 0.9908. The limits of quantification were in the range 0.05–10 μg/kg. Blank soil samples spiked with 4 × and 20 × the limit of quantification provided recovery rates of 60.2–120.3% (except sulfamethoxazole spiked at 4 × the limit of quantification, which gave 131.9%) with a relative standard deviation < 13% (except clopidol spiked at 20 × the limit of quantification, which gave 25.2%). This method was successfully applied to the monitoring of 51 field‐incurred agricultural loamy‐sand soil samples collected from 17 provincial areas throughout the Korean Peninsula. The detected and quantified drugs were clopidol (≤ 4.8 μg/kg), sulfathiazole (≤ 7.7 μg/kg), sulfamethazine (≤ 6.6 μg/kg), tiamulin (≤ 10.0 μg/kg), and tylosin (≤ 5.3 μg/kg). The developed method is simple and versatile, and can be used to monitor various classes of veterinary drugs in soil.     

The effect of afforestation on the soil organic carbon (SOC) of a peaty gley soil using on-line thermally assisted hydrolysis and methylation (THM) in the presence of 13C-labelled tetramethylammonium hydroxide (TMAH)

In Britain substantial areas of both deep and shallow peatland have been afforested with conifers since the 1950s. However, information about the effects of afforestation on the properties of soil organic carbon (SOC) is lacking. Investigating the geochemical changes that take place when lignin- and tannin-derived phenols are degraded and incorporated into SOC will provide us with an insight into soil carbon dynamics at the molecular level. Here we compare the phenolic distributions in two different peaty gley soil profiles using on-line thermally assisted hydrolysis and methylation (THM) in the presence of both unlabelled and ¹³C-labelled tetramethylammonium hydroxide (TMAH). The two soil profiles were beneath respectively an unforested moorland (ML) and a second rotation Sitka spruce (Picea sitchensis) afforested moorland (SS), from Harwood (Northumberland, northeast England, UK). THM of these soils in the presence of ¹³C-labelled TMAH enabled us to assess the relative contributions of lignin, demethylated lignin, and non-lignin phenolics. The lignin phenolic distributions differed in both soil profiles reflecting changing source and decay dynamics within and between the sites. A progressive degradation of syringyl (S) and guaiacyl (G) phenolics was observed in the ML soil, compared with an increase of such components in the organic/mineral horizons of the SS soil. A significant tannin input was observed, particularly in the upper horizons of the SS soil. The S/G ratio gradually decreased with increasing burial in the ML soil, whilst a change in vegetation input and land preparation was recorded by this ratio in the SS soil. Overall, this suggests that afforestation influences the phenolic compositional profiles in these peaty gley soils as a result of one or more of the following processes: changing vegetation input, horizon inversion prior to planting, root input or leaching. This highlights the potential of using lignin and tannins as molecular indicators to assess the effects of afforestation on SOC.     

Size and concentration determination of (functionalised) fullerenes in surface and sewage water matrices using field flow fractionation coupled to an online accurate mass spectrometer: Method development and validation

In order to assess the environmental risks of a compound it is imperative to have suitable and reliable techniques for its determination in environmental matrices. In this paper, we focused on a method development for the recently introduced online coupling of a field flow fractionation (FFF) system to an Orbitrap-HRMS, that allows the simultaneous size and concentration determination of different aqueous fullerene aggregates and their concentrations in different size fractions. A 0.05% NH₄OH solution in water was identified as the best carrier liquid for the analysis of the three different aqueous fullerene suspensions (C₆₀ [60], [6,6]-phenyl-C₆₁ butyric acid methyl ester ([60]PCBM) and [6,6]-(bis)phenyl-C₆₁ butyric acid methyl ester ([60]bisPCBM)). The multi-angle light scattering (MALS) data received after employing the ammonia solution was consistent with both the theory and calibration using well defined Au and latex particles. The LODs obtained using Orbitrap HRMS detection were 0.1 μg L⁻¹ for an injection volume of 100 μL which are significantly better than the LODs obtained by using UV (20 μg L⁻¹) and MALS detectors (5 μg L⁻¹). However, these LODs can be further improved as in theory there is no limit to the amount of sample that can be injected into the FFF. Environmental samples (river and sewage water) were spiked with fullerenes and the fractograms obtained for these samples revealed that the matrix does affect the size of fullerene aggregates. Information on the size distribution can be useful for the risk assessment of these particles.     

Comparison of total fluorine, extractable organic fluorine and perfluorinated compounds in the blood of wild and pefluorooctanoate (PFOA)-exposed rats: Evidence for the presence of other organofluorine compounds

The widespread occurrence and environmental persistence of perfluorinated compounds (PFCs) received worldwide attention recently. Exhaustive analysis of all fluorinated compounds in an environmental sample can be daunting because of the constraints in the availability of analytical standards and extraction methods. Combustion ion chromatographic technique for trace fluorine analysis was used to assess the concentrations of known PFCs (e.g., PFOS, PFOA) and total fluorine (TF) in the blood of wild rats collected from Japan. The technique was further validated using tissues from PFOA-exposed rats. Six PFCs (PFOS, PFOSA, PFUnDA, PFDA, PFNA, and PFOA) were detected in all of the wild rat blood samples. Concentrations of extractable organic fluorine (EOF) in fraction 1 (Fr1; MTBE extraction) of wild rats ranged 60.9-134 ng F mL⁻¹, while those in fraction 2 (Fr2; hexane) were below LOQ (32 ng F mL⁻¹); TF concentrations in the blood of wild rats ranged from 59.9-192 ng F mL⁻¹. The contribution of known PFCs in EOF-Fr1 (MTBE) varied from 9% to 89% (56% on average), and known PFC concentrations in TF content were less than 25%. In contrast, TF concentrations in the blood of PFOA-exposed rats ranged from 46900 to 111000 ng F mL⁻¹, with PFOA contributing over 90% of TF. A comparison of results from the samples analyzed in this study and the literature revealed three distinct groups with PFOA/known PFC and TF levels (i.e., wild rats and general population, occupationally exposed workers, and PFOA-exposed laboratory rats). The mass balance analysis of the different forms of fluorine in blood suggested the presence of other forms of organic fluorine in addition to known PFCs.     

New methods and reagents in organic synthesis, 24. A new synthesis of prumycin as an application of the direct c-acylation using diphenyl phosphorazidate (DPPA)

The 5-substituted 4-methoxycarbonyloxazole $\text{5}$ derived from L-serine derivative $\text{3}$ using diphenyl phosphorazidate (DPPA) has been converted to a 2,4-diaminosugar antibiotic, prumycin.     

Interactions and stability of silver nanoparticles in the aqueous phase: Influence of natural organic matter (NOM) and ionic strength

The rapid development of nanotechnology and the related production and application of nanosized materials such as engineered nanoparticles (ENP) inevitably lead to the emission of these products into environmental systems. So far, little is known about the occurrence and the behaviour of ENP in environmental aquatic systems. In this contribution, the influence of natural organic matter (NOM) and ionic strength on the stability and the interactions of silver nanoparticles (n-Ag) in aqueous suspensions was investigated using UV–vis spectroscopy and asymmetrical flow field-flow fractionation (AF⁴) coupled with UV–vis detection and mass spectrometry (ICP-MS). n-Ag particles were synthesized by chemical reduction of AgNO₃ with NaBH₄ in the liquid phase at different NOM concentrations. It could be observed that the destabilization effect of increasing ionic strength on n-Ag suspensions was significantly decreased in the presence of NOM, leading to a more stable n-Ag particle suspension. The results indicate that this behaviour is due to the adsorption of NOM molecules onto the surface of n-Ag particles (“coating”) and the resulting steric stabilization of the particle suspension. The application of AF⁴ coupled with highly sensitive detectors turned out to be a powerful method to follow the aggregation of n-Ag particle suspensions at different physical–chemical conditions and to get meaningful information on their chemical composition and particle size distributions. The method described will also open the door to obtain reliable data on the occurrence and the behaviour of other ENP in environmental aquatic systems.     

Determination of multiple antibiotics in agricultural soil using a quick,easy, cheap,effective, rugged,and safe method coupled with ultra-high performance liquid chromatography-tandem mass spectrometry

In this study, we combined ultra-high performance liquid chromatography with tandem mass spectrometry to establish a quick, easy, cheap, effective, rugged, and safe method of detecting 21 target antibiotics in agricultural soil samples. Antibiotics were extracted with mixed solvents consisting of ethylenediaminetetraacetic acid disodium salt dihydrate and phosphoric acid citric acid buffer and acetonitrile which were purified with octadecylsilyl as an adsorbent and anhydrous sodium sulfate as a desiccant. This method was able to effectively extract all of the target antibiotics from agricultural soils, with recovery efficiencies ranging from 55 to 108% and limits of detection between 0.09–0.68 μg/kg. We also validated this new method for selectivity, sensitivity, and reliability of detecting multiple antibiotics in 12 samples. Considering the potential environmental and public health effects of antibiotics in agricultural soils, our new method can help analyze the degree of antibiotic contamination and provide valuable information for soil quality and risk assessment.