Detection of Newcastle disease virus with quantum dots-resonance light scattering system

A sensitive QDs-based RLS assay method for the detection of Newcastle disease virus (NDV) antibody has been developed. CdTe quantum dots (QDs) were conjugated with Newcastle disease virus and used as RLS-based probes to detect NDV antibody. The electrostatic interaction between CdTe QDs and NDV resulted in enhanced resonance light scattering (RLS) signal characterized at 555 nm. Upon the addition of NDV antibody, QDs-NDV formed dispersive immunocomplex that can decrease the RLS signal. The decreased RLS intensity at 555 nm (ΔI_RLS) was linearly proportional to the concentration of NDV antibody (C_anti-NDV) in the range of 0.5-50 ng/mL, with correlation coefficient of 0.974 and detection limit of 0.1 ng/mL under the optimization conditions. The proposed method was applied to the determination of NDV antibody in spiked samples with satisfactory results.     

Sandwich-type electrochemiluminescence immunosensor based on Ru-silica@Au composite nanoparticles labeled anti-AFP

A simple and sensitive sandwich-type electrochemiluminescence immunosensor for α-1-fetoprotein (AFP) on a gold nanoparticles (nano-Au) modified glassy carbon electrode (GCE) was developed by using Ru-silica (Ru(bpy)₃²⁺-doped silica) doped Au (Ru-silica@Au) composite as labels. The primary antibody, anti-AFP was first immobilized on the gold nanoparticles modified electrode due to the covalent conjugation, then the antigen and the Ru-silica@Au composite nanoparticles labeled secondary antibody was conjugated successively to form a sandwich-type immunocomplex through the specific interaction. The surfaces of Ru-silica nanoparticles were modified via the assemble of Au nanoparticles. The prepared Ru-silica@Au composite nanoparticles own the large surface area, good biocompatibility and highly effective electrochemiluminescence properties. The morphologies of the Ru-silica@Au composite nanoparticles were investigated by using transmission electronic microscope (TEM). The Ru-silica@Au composite nanoparticles labeled anti-AFP/AFP/bovine serum albumin (BSA)/anti-AFP/nano-Au modified GCE electrode was evaluated by means of cyclic voltammetry (CV) and electrogenerated chemiluminescence (ECL). The immunosensor performed high sensitivity and wide liner for detection AFP in the range of 0.05-50 ng/mL and the limit detection was 0.03 ng/mL (defined as S/N = 3).     

Sandwich-type electrochemiluminescence immunosensor based on N-(aminobutyl)-N-ethylisoluminol labeling and gold nanoparticle amplification

A novel electrochemiluminescence (ECL) sandwich-type immunosensor for human immunoglobulin G (hIgG) on a gold nanoparticle modified electrode was developed by using N-(aminobutyl)-N-ethylisoluminol (ABEI) labeling. The primary antibody, goat-anti-human IgG was first immobilized on a gold nanoparticle modified electrode, then the antigen (human IgG) and the ABEI-labeled second antibody was conjugated successively to form a sandwich-type immunocomplex. ECL was carried out with a double-step potential in carbonate buffer solution (CBS) containing 1.5 mM H₂O₂. The ECL intensity increased linearly with the concentration of hIgG over the range 5.0-100 ng/mL. The limit of detection was 1.68 ng/mL (S/N = 3). The relative standard deviation was 3.79% at 60 ng/mL (n = 9). The present immunosensor is simple and sensitive. It has been successfully applied to the detection of hIgG in human serums.     

一种快速高选择性检测痕量癌胚抗原的共振散射光谱法

用10 nm的金纳米粒子标记单克隆癌胚抗原抗体制备了检测癌胚抗原（CEA）的共振散射光谱探针（Au-CEAAb）。在pH 6.8 的Na2HPO4- NaH2PO4缓冲溶液中及聚乙二醇-6000存在下, CEA与Au-CEAAb发生免疫反应聚集形成疏水性的、平均粒径为227.0 nm的免疫复合物微粒,并在321 nm、581 nm产生2个共振散射峰。随着癌胚抗原（CEA）浓度的增大,581 nm处的共振散射强度I581nm线性增加,其增加值△I581nm与CEA浓度在1.0～50.0 ng·mL-1范围内呈良好的线性关系,相应的回归方程、相关系数、检出限(3σ)分别为ΔI581nm=1.63 C +5.6、0.9940、0.52 ng·mL-1。该法简便、快速、灵敏且选择性好,用于检测人血清中癌胚抗原（CEA）,结果满意。     

Preparation of reversibly photo-cross-linked nanogels from pH-responsive block copolymers and use as nanoreactors for the synthesis of gold nanoparticles

Reversibly photo-cross-linkable pH-responsive block copolymer poly(ethylene oxide)-b-poly((2-(diethylamino)ethyl methacrylate-co-4-methyl-[7-(methacryloyl)oxyethyloxy] coumarin)) (PEO-b-P(DEA-co-CMA)) was synthesized via atom transfer radical polymerization (ATRP). Block copolymer nanogels could be easily prepared by first photo-cross-linking of the micelles at pH > 7 and then adjusting the solution to pH < 7. The photo-cross-linking was proved to be reversibly controlled under alternative irradiation of UV light at 365 nm and 254 nm. As a result, the cross-linking degrees and sizes of the nanogels can be easily controlled by alternatively UV light irradiation. Finally, the nanogels can serve as nanoreactors for the synthesis of gold nanoparticles. The protonated DEA units were first coordinated with HAuCl₄, and then the electrostatically bounded AuCl⁴⁻ anions were reduced to gold nanoparticles by NaBH₄. The nanogel-supported gold nanoparticles were used in chemical catalysis. The pH-responsive photo-cross-linked nanogels have been characterized using dynamic light scattering, transmission electron microscopy, UV-vis spectra and ¹H NMR spectroscopy measurements, respectively.     

A new resonance scattering spectral method for the determination of trace amounts of iodate with rhodamine 6G

Under the conditions of 0.04 mol L⁻¹ HCl-8.0 × 10⁻⁴ mol L⁻¹ KI, there is a fluorescence peak at 540 nm and a synchronous fluorescence peak at 540 nm for rhodamine 6G (RhG). When there is IO₃⁻, it reacts with exceed I⁻ to form I₃⁻. And I₃⁻ and RhG combine into ion association particles. The particles exhibit three resonance scattering peaks at 320, 400 and 595 nm. And there is fluorescence quenching at 540 nm. Iodine concentration is proportional to the intensity of the resonance scattering intensity at 400 nm in the range of 1.0-20 × 10⁻⁷ mol L⁻¹. And a new resonance scattering spectral (RSS) method has been described for the determination of IO₃⁻ in salt samples. The spectral results have been verified that the formation of (RhG-I₃)_n association particles and solid-liquid interfaces are the main factor that cause the fluorescence quenching and resonance scattering effects.     

Detection of polycyclic aromatic hydrocarbon (PAH) compounds in artificial sea-water using surface-enhanced Raman scattering (SERS)

This paper reports an accurate synthesis of surface-enhanced Raman scattering (SERS) active substrates, based on gold colloidal monolayer, suitable for in situ environmental analysis. Quartz substrates were functionalized by silanization with (3-mercaptopropyl)trimethoxysilane (MPMS) or (3-aminopropyl)trimethoxysilane (APTMS) and they subsequently reacted with colloidal suspension of gold metal nanoparticles: respectively, the functional groups SH and NH₂ bound gold nanoparticles. Gold nanoparticles were prepared by the chemical reduction of HAuCl₄ using sodium tricitrate and immobilized onto silanized quartz substrates. Active substrate surface morphology was characterized with scanning electron microscopy (SEM) measurements and gold nanoparticles presented a diameter in the range 40-100 nm. Colloidal hydrophobic films, allowing nonpolar molecule pre-concentration, were obtained. The surfaces exhibit strong enhancement of Raman scattering from molecules adsorbed on the films. Spectra were recorded for two PAHs, naphthalene and pyrene, in artificial sea-water (ASW) with limits of detection (LODs) of 10 ppb for both on MPMS silanized substrates.     

Gold nanoparticle-templated assembly of oligothiophenes: preparation and film properties

Terthiophene-appended gold nanoparticles were prepared by the reduction of AuCl₄⁻(C₈H₁₇)₄N⁺ with NaBH₄ in the presence of bis[2,5-di(3-hexylthiophen-2-yl)thiophene-3-carboxyloxyhexanyl]disulfide. A hexagonal self-assembly of particles with gold core diameters (1.9±0.1 nm) was detected by high-angle annular dark-field scanning transmission electron microscopy. The electric conductivity of the iodine-doped film was 9.1×10⁻⁶ S cm⁻¹, which was ascribable to the terthiophene-based inter-ligand π-π interactions. The Au/terthiophene hybrid spin-coated film consisted of a highly three-dimensional assembled structure of terthiophenes, as inferred from grazing-incidence small-angle X-ray scattering, indicating that such monodispersed and small-sized gold nanoparticles can serve as a template for this organization. In this study, a gold nanoparticle-templated assembly of oligothiophenes has been fabricated for proposing a method to develop tailor-made organizations of π-conjugated oligomers.     

A highly selective nanogold-aptamer catalytic resonance scattering spectral assay for trace Hg using HAuCl4-ascorbic acid as indicator reaction

Single strand DNA (ssDNA) was used to modify nanogold to obtain a nanogold-aptamer resonance scattering (RS) probe (NGssDNA) for Hg²⁺, based on the formation of stable thymine-Hg²⁺-thymine (T-Hg²⁺-T) mismatches and aggregation of the released nanogold particles. After removing the aggregated particles by filtrate membrane, the excess NGssDNA in the filtration solution exhibit catalytic effect on the gold particle reaction between HAuCl₄ and ascorbic acid (AA) that appear as RS peak at 596 nm. When Hg²⁺ concentration increased, the RS intensity at 596 nm decreased. The decreased intensity is linear to Hg²⁺ concentration in the range of 0.00008-0.888 ng/mL Hg²⁺, with detection limit of 0.000034 ng/mL. The nanogold-aptamer catalytic RS assay was applied to determination of Hg²⁺ in water with satisfactory results.     

Synthesis of poly(o-phenylenediamine) hollow spheres and nanofibers using different oxidizing agents

Poly(o-phenylenediamine) (PoPD) hollow spheres (ca. 800 nm in outer diameter) were synthesized by a simple solution route using ammonium persulfate (APS) as the oxidizing agent, whereas PoPD nanofibers (0.5-2 μm in width and more than 100 μm in length) and gold nanoparticles (200-500 nm) were obtained when changing the oxidizing agent of APS to chlorauric acid (HAuCl₄). The chemical structures of PoPD hollow spheres and nanofibers were characterized by FTIR and XRD spectra. When using HAuCl₄ as the oxidizing agent, the products of PoPD nanofibers and gold nanoparticles could be separated by chemical methods. The monomer droplets were proposed to act as template to the formation of polymer hollow spheres while the oriented growth of polymer nanofibers might be catalyzed by gold nanoparticles.     

Morphological and electrical characteristics of amino acid–AuNP nanostructured two-dimensional ensembles

The interaction between amino acids (l-cysteine, l-lysine) and gold nanoparticle layers deposited on ITO glasses was investigated. The citrate capped gold nanoparticles (AuNP) were first deposited as a thin layer onto silanized ITO and subsequently linked with an amino acid, due to strong affinity of thiol and amine groups to gold. The gold nanoparticles had an elliptical shape, with size varying between 7 and 14 nm, as indicated by TEM analysis. After deposition on ITO substrate, the nanoparticles self-assembled into large aggregates with poor contact between, as revealed by AFM. After linking l-cysteine or l-lysine to the surface of nanoparticles layer, a change in morphology occured. A better contact between the gold aggregates boundary developed, which improved the conducting properties of the nanostructured layer. The electrical resistance of the AuNPs layer, obtained from I–V measurements, was very high (2.8 × 10¹³ Ω) and slightly decreased after linking the NPs with amino acids.     

Adding sodium dodecylsulfate to the running electrolyte enhances the separation of gold nanoparticles by capillary electrophoresis

This paper describes employing capillary electrophoresis (CE) for the separation of gold colloids in nanometer-size regimes. Adding sodium dodecylsulfate (SDS) surfactant to the running buffer enhances the capability of CE to separate gold nanoparticles. We found that the optimized separation conditions involved SDS (70 mM), 3-cyclohexylamoniuopropanesulfonic acid (CAPS) buffer (10 mM), pH 10.0, and an applied voltage of 20 kV. We propose that the charged surfactants associate onto the surface of the gold nanoparticles and cause a change in the charge-to-size ratio of gold nanoparticle, which is a function of the surface area of nanoparticle and the surfactant concentration of running electrolyte. At high concentrations of the surfactant in the running electrolyte—i.e., when the surface of the gold nanoparticles is fully occupied with SDS—a linear relationship exists between the electrophoretic mobility and nanoparticles having diameters ranging from 5.3 to 38 nm. Based on the results of separating the 5.3 and 19 nm nanoparticles, we estimate that the size resolution (R_s=1.0) is 5.0 nm. The relative standard deviations of the electrophoretic mobilities of the 5.3 and 19 nm gold nanoparticles are 0.97 and 0.54%, respectively.     

Enhanced plasmon resonance light scattering signals of colloidal gold resulted from its interactions with organic small molecules using captopril as an example

Gold nanoparticles are known for their plasmon resonance absorption (PRA) depending on their size. Our this investigation shows that plasma resonance light scattering (PRLS) signals in the corresponding PRA region could be measured using a common spectrofluorometer, and be enhanced when aggregation of gold nanoparticles occurs due to their interaction with organic small molecules (OSMs). Using captopril (Cap) as an example, we investigated the interactions of gold nanoparticles with OSMs in order to propose a general method of OSMs such as typical clinic organic drugs. In aqueous medium of pH 2.09, there are about 2.2 × 10³ Cap molecules covalently binding to the surface of a 10-nm diameter gold nanoparticle through the thiol functional group of Cap, and thus forms a core-shell assembly of [(Au)₃₁₀₀₀]@[(Cap)₂₂₀₀], displaying strong enhanced PRLS signals in the PRA region of gold colloid. The PRLS intensities characterized at 553.0 nm were found to be proportional to the concentration of Cap over the range of 0.1-1.7 mg L⁻¹ with the determination limit (3σ) of 32.0 μg L⁻¹. With that, Cap in pharmaceutical preparations could be determined with the recovery of 97.0-104.5% and R.S.D. of less than 2.4%.     

Composition dependent frequency upconversion of Er/Yb-codoped lead chloride tellurite glasses

The green and red upconversion luminescence of Er³⁺ in lead chloride tellurite glasses excited at 980 nm is investigated. Three intense emission bands centered at 530, 545, and 658 nm corresponding to the transitions ⁴S_3/2→⁴I_15/2, ²H_11/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2, respectively, were simultaneously observed at room temperature. With increasing PbCl₂ content, the intensity of green (530 nm) emissions increase slightly, while the green (545 nm) and red (658 nm) emissions increase significantly. The results indicate that PbCl₂ has more influence on the green (545 nm) and red (658 nm) emissions than the green (530 nm) emission. The dependence of upconversion intensities on excitation power and possible upconversion mechanisms are discussed and evaluated.     

A simple and sensitive resonance scattering spectral method for determination of hydroxyl radical in Fenton system using rhodamine S and its application to screening the antioxidant

Based on resonance scattering (RS) effect of rhodamine dye association particles, a new resonance scattering method for the determination of hydroxyl free radical from Fenton reaction was developed. In HCl-NaAc buffer solution, the OH of Fenton reaction oxidized the excess I⁻ to I₃⁻. The I₃⁻ combined, respectively, with rhodamine B (RhB), butyl rhodamine B (b-RhB), rhodamine 6G (RhG) and rhodamine S (RhS) to form association particles that exhibit stronger resonance scattering effect at 420 nm and 610 nm. However, the RS peak at about 610 nm was interfered with its synchronous fluorescence peak at 580 nm for RhB, 580 nm for b-RhB, 560 nm for RhG and 560 nm for RhS, respectively. The concentration of H₂O₂ in the range of 0.648-21.6 μmol/L, 0.423-13.0 μmol/L, 0.216-13.0 μmol/L and 0.092-13.0 μmol/L was linear to its resonance scattering intensity at 420 nm. Its detection limit was 0.15 μmol/L, 0.10 μmol/L, 0.092 μmol/L and 0.044 μmol/L, H₂O₂, respectively. This RhS RS method was applied to selection of the antioxidant, with satisfactory results.     

A sensitive resonance light scattering spectrometry of trace Hg with sulfur ion modified gold nanoparticles

A new resonance light scattering (RLS) spectrometric method for mercury ions (Hg²⁺) in aqueous solutions with sulfur ion (S²⁻) modified gold nanoparticles (Au-NPs-S) has been developed in this contribution. It was found that S²⁻ at the surface of Au-NPs resulting from the surface modification can interact with Hg²⁺ to form very stable S-Hg-S bonds when Hg²⁺ concentration is lower than that of S²⁻, resulting in the aggregation of Au-NPs-S and causing enhanced RLS signals. The enhanced RLS intensities (ΔI_RLS) characterized at 392 nm were found to be proportional to the concentration of Hg²⁺ in the range of 0.025-0.25 μmol L⁻¹ with a detection limit (3σ) of 0.013 μmol L⁻¹. Our results showed that this approach has excellent selectivity for Hg²⁺ over other substances in aqueous solutions.     

Temperature-dependent six-photon upconversion fluorescence of Er

Yb³⁺/Er³⁺ codoped β-NaYF₄ microcrystals were synthesized through a facile EDTA-assisted hydrothermal method. Under 980 nm excitation, 244, 256, and 276 nm upconversion (UC) emissions were observed in NaYF₄:Yb³⁺/Er³⁺ microcrystals, which were assigned to the ²I_11/2 → ⁴I_15/2, ⁴D_7/2 → ⁴I_15/2, and ⁴G_9/2 → ⁴I_15/2 transitions of Er³⁺ ions, respectively. Successive energy transfers (ETs) from Yb³⁺ to Er³⁺ played crucial roles in populating the high-energy states of Er³⁺ ions. Power dependence analysis exhibited that 244 and 256 nm UC emissions came from six-photon processes. Temperature-dependent UC emissions of ⁴D_7/2 → ⁴I_15/2 and ²I_11/2 → ⁴I_15/2 transitions of Er³⁺ were discussed and the nonradiative relaxation (NR) process of ²I_11/2 → ⁴D_7/2 was confirmed.     

A dual-wavelength resonance light scattering ratiometry of biopolymer by its electrostatic interaction with surfactant

A dual-wavelength resonance lighting scattering (DW-RLS) ratiometry is developed to detect anion biopolymer based on their bindings with cation surfactant. Using the interaction of Hyamine 1622 (HM) with fish sperm DNA (fsDNA) as an example, a dual-wavelength resonance light scattering (DW-RLS) ratiometric method of DNA was constructed. In Britton-Robinson buffer controlled medium, fish sperm DNA (fsDNA) could interact with Hyamine 1622 (HM), displaying significantly enhanced RLS signals. By measuring the RLS signals characterized at 300.0 nm (I_300.0) and the RLS intensity ratio (I_276.0/I_294.0), respectively, fsDNA over a wide dynamic range of content could be detected. Typically, when HM concentration is kept at 6.0 × 10⁻⁵ mol l⁻¹, using I_300.0 could detect fsDNA over the range of 50-2000 ng ml⁻¹ with the limit of 3.0 ng ml⁻¹, while using I_276.0/I_294.0 could detect fsDNA over the range of 0.5-2500 ng ml⁻¹ with the limit of 0.05 ng ml⁻¹. Thus the latter so-called DW-RLS ratiometry is obviously superior to the former one. Based on the measurements of I_300.0 and I_276.0/I_294.0 data, a Scatchard plot concerning the interaction between HM and fsDNA could be constructed and thus the binding number (n) and binding constant (K) could be available with the values of 13.5 and 1.35 × 10⁵ mol⁻¹ l, and 11.9 and 1.65 × 10⁵ mol⁻¹ l, respectively.     

Visible and infrared luminescence properties of Er-doped Y2Ti2O7 nanocrystals

Er³⁺-doped Y₂Ti₂O₇ nanocrystals were fabricated by the sol-gel method. While the annealing temperature exceeds 757 °C, amorphous pyrochlore phase Er_xY_2−xTi₂O₇ transfers to well-crystallized nanocrystals, and the average crystal size increases from ∼70 to ∼180 nm under 800-1000 °C/1 h annealing. Er_xY_2−xTi₂O₇ nanocrystals absorbing 980 nm photons can produce the upconversion (526, 547, and 660 nm; ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2, and ⁴F_9/2→⁴I_15/2, respectively) and Stokes (1528 nm; ⁴I_13/2→⁴I_15/2) photoluminescence (PL). The infrared PL decay curve is single-exponential for Er³⁺ (5 mol%)-doped Y₂Ti₂O₇ nanocrystals but slightly nonexponential for Er³⁺ (10 mol%)-doped Y₂Ti₂O₇ nanocrystals. For 5 and 10 mol% doping concentrations, the mechanism of up-converted green light is the two-photon excited-state absorption. Much stronger intensity of red light relative to green light was observed for the sample with 10 mol% dopant. This phenomenon can be attributed to the reduced distance between Er³⁺-Er³⁺ ions, resulting in the enhancement of the energy-transfer upconversion and cross-relaxation mechanisms.     

Nanoparticles of superconducting γ-Mo2N and δ-MoN

We have been able to prepare nanoparticles (∼4 nm diameter) of cubic γ-Mo₂N by a simple procedure involving the reaction of MoCl₅ with urea at 873 K. The nanoparticles show a superconducting transition around 6.5 K. The γ-Mo₂N nanoparticles are readily transformed to nanoparticles of δ-MoN with a slightly larger diameter on heating in a NH₃ atmosphere at 573 K. Phase-pure δ-MoN obtained by this means shows a superconducting transition around 5 K.