1，2-萘醌-4-磺酸钠分光光度法测定链霉素的研究

链霉素(streptomycin,STR)是一种对结核分枝杆菌有强大抗菌作用的氨基糖苷类抗生素,它通过作用于细胞的核糖体抑制细菌蛋白质的生物合成而呈现杀菌作用[1].目前所报道检测链霉素含量的方法主要有高效液相色谱法[2] 、鲁米诺的流动注射化学发光法[3] 、微生物学检测法[4、5] 、荧光法[6]、免疫法[7]以及紫外分光度度法[8]等,但以可见光度法测定链霉素的研究还很少有报道.本文基于1,2-萘醌-4-磺酸钠(NQS)能与含有胺基类药物分子结构中的胺基发生亲核缩合或取代作用 [9-13],建立了以NQS作为显色剂在可见光度法测定STR的新方法.研究表明,控制溶液pH12.00,STR与NQS发生缩合反应生成摩尔比为1: 2红褐色产物,最大吸收波长λ max =470 nm,STR浓度在2.91μg/mL～145.7μg/mL范围内与吸光度成良好线性关系.与文献中所报道的其他方法相比,该方法不仅具有简便、快速、不需昂贵的仪器设备等特点,具有重要的应用价值.     

Study of methanol catalyzed reaction between sodium 1,2-naphthoquine-4-sulfonate and hydroxyl ion and its application in the determination of methanol

A novel and simple spectrophotometric method for the direct determination of methanol with 1,2-naphthoquinone-4-sulfonate (NQS) is developed in this paper. It is based on the fact that methanol can catalyze the reaction between 1,2-naphthoquinone-4-sulfonate and hydroxyl ion to form 2-hydroxy-1,4-naphthoquinone in buffer solution of pH 13.00. Beer's law is obeyed in a range of 0.26-15.8 mg/ml at the maximal absorption wavelength of 454 nm. The equation of linear regression is A = 0.01998 + 0.05944C (mg/ml), with a linear regression correlation coefficient of 0.9977. The detection limit is 0.25mg/ml (3sigma/k), while R.S.D. is 2.0% and the recovery rate is in a range of 96.5-103%. The detailed mechanism for the formation of the products is proposed and discussed.     

Catalysis reaction between sodium 1,2-naphthoquinone-4-sulfonate and hydroxyl ion using captopril as catalyzer and determination of captopril

A novel and simple spectrophotometric method for the determination of Captopril with sodium 1,2-naphthoquinone-4-sulfonate is established in this paper. The detailed reaction mechanism is proposed and discussed. It is based on the fact that captopril can catalyze the reaction between sodium 1,2-naphthoquinone-4-sulfonate and hydroxyl ion to form 2-hydroxy-1,4-naphthoquinone in buffer solution of pH 13.00. Beer's law is obeyed in a range of 0.64-80 μg mL⁻¹ at the maximal absorption wavelength of 442 nm. The equation of linear regression is A = 0.05815 + 0.00589C (μg mL⁻¹), with a linear regression correlation coefficient of 0.9981. The detection limit is 0.3 μg mL⁻¹, R.S.D. is 0.77% and the recovery rate is in range of 96.0-103.8%. Furthermore, the method has been validated and successfully applied to the determination of captopril in pharmaceutical samples.     

A novel spectrophotometric method for the determination of aminophylline in pharmaceutical samples in the presence of methanol

A rapid, simple and sensitive method for the determination of aminophylline (Ami) using sodium 1, 2-naphthoquine-4-sulfonate (NQS) and methanol is established in this paper. It is based on the fact that a russety product can be formed by the reaction between aminophylline (Ami) and sodium 1, 2-naphthoquine-4-sulfonate (NQS) in pH 13.00 buffer solution. When methanol is added to the solution, the sensitivity of the color development reaction between Ami and NQS is improved, and the color of the system of NQS-Ami becomes a salmon pink. Beer's law is obeyed in a range of 4.97-69.5 microg ml(-1) of Ami at the maximum absorption of 453 nm (epsilon=4.87 x 10(3) l mol(-1) cm(-1)). The linear regression equation of the calibration curve is A=0.14458+0.00832C (microg ml(-1)), with a linear regression correlation coefficient of 0.9944. The detection limit is 0.7 microg ml(-1) (3sigma/k), R.S.D. is 1.1% and the recovery rate is in range of 92.5-105%. Furthermore, this method has been successfully applied to the determination of Ami in pharmaceutical samples.     

奈替米星和1,2-萘醌-4-磺酸钠显色反应的研究及对奈替米星的测定

建立了用1, 2-萘醌-4-磺酸钠(NQS)作显色剂测定奈替米星(NET)的新方法.研究表明:控制溶液pH=10.00,NET与NQS反应生成摩尔比为1∶3的红褐色产物,最大吸收波长λmax=445 nm,奈替米星浓度在6.4～57.6 mg/L范围内与吸光度呈良好线性关系,表观摩尔吸光系数ε＝6.31×103 L\5mol-1\5cm-1,方法检出限为5.9 mg/L,相对标准偏差(RSD)为0.81%,平均回收率99.0%以上.该法能直接用于药物样品中奈替米星的测定,结果满意.     

A novel visible spectrophotometric method for the determination of ethamsylate in pharmaceutical preparations and biological samples

A highly sensitive visible spectrophotometric method has been developed to determine ethamsylate in this paper, which is based on using Cu(II) as spectroscopic probe reagent. The study indicates that in the presence of SCN^? and KNO₃, Cu(II) is reduced to Cu(I) by ethamsylate at pH 5.0, and the in situ formed Cu(I) reacts with SCN^? to form into the white emulsion CuSCN that could be stayed upon the surface of water. According to the amount of residual Cu(II), the amount of ethamsylate can be indirectly determined. Under the optimal conditions, Beer's law is applicable in the range of 0.2–9.0 μg/mL (7.60 × 10^?7–3.42 × 10^?5 mol/L) for aqueous standard solution of ethamsylate with linear correlation coefficient of 0.9998. The detection limit and relative standard deviation are 0.12 μg/mL and 1.5%, respectively. And the molar absorption coefficient of the indirect determination of ethamsylate is 1.0 × 10⁵ L/mol cm. The method is successfully applied to determine ethamsylate in pharmaceutical preparations and biological samples.     

Development and prevalidation of a method for phenol determination by solid-phase spectrophotometry

A simple, sensitive and rapid solid-phase spectrophotometric procedure was developed for the determination of traces of phenol with 4-aminoantipyrine as a reagent (AAP-SPS), and the optimal experimental conditions were established. This method was performed by sorption and direct absorbance measurements of the product phenol-AAP sorbed on the anion-exchanger Dowex 1-X4 (0.2 g) at 495 nm (absorption maximum) and 700 nm (non-absorption wavelength). The sensitivity offered by the AAP-SPS procedure was higher by a factor of 40 compared with the respective conventional spectrophotometric method. Metrological characteristics were established using a prevalidation strategy. The AAP-SPS procedure is characterized by a linear calibration function in the working range of 0.05–0.50 μmol, low standard deviation of procedure (±0.012), low limit of determination (0.021 μmol), and favorable random (±0.85 to ±11.27%) and systematic deviations (−4.55 to +11.50%). Moreover, the accuracy of the system investigated by the recovery test is acceptable (99–102%). Favorable working and performance characteristics make the new SPS method ideal for phenol monitoring in pharmaceutical preparations as well as other matrices.     

Spectrophotometric determination of clotrimazole and Phenylephrine-HCl in pharmaceutical formulation using 1, 2-naphthoquinone-4-Sulphonic acid sodium salt (NQS) as a chromogenic reagent

A sensitive, rapid and economical spectrophotometric method based on their interaction with NQS reagent in basic medium, which produces orange-colored complexes, has been devised to identify many drugs with amino groups (clotrimazole and phenylephrine-HCl). The maximum absorption for the complexes of clotrimazole and phenylephrine-HCl is 455 and 484 nm, respectively. Beer's law is applicable in the concentration ranges of (2–40) μg/ml for clotrimazole and (0–20) μg/ml for phenylephrine-HCl. The molar absorptivity values are 3931.1760 L/mol.cm and 4521.4074 L/mol.cm of clotrimazole and phenylephrine-HCl respectively with accuracy of 100.0285%–103.1456% and RSD better than 3.3211%. The method has been successfully used to determine these medications in pharmaceutical formulations, and it has been found to be superior to British Pharmacopeia standard procedures. At a 95% confidence level, F and t-tests are less than the tabulated values.     

A green analytical procedure for sensitive and selective determination of iron in water samples by flow-injection solid-phase spectrophotometry

A greener analytical procedure based on flow-injection solid-phase spectrophotometry is proposed for iron determination. Iron(II) is reversibly retained on 1-(2-thiazolylazo)-2-naphthol immobilized on C18-bonded silica, yielding a brown complex. The metal ion is eluted as iron(II) with a small volume of a diluted acid solution without removing the immobilized reagent, which can be used for at least 100 determinations. Other chemicals (buffer and reducing agent) were carefully selected taking into account the analytical performance and toxicity. The developed procedure is 10-fold more sensitive in comparison to the analogous procedure based on measurements in solution, being suitable for the determination of iron in water samples with good accuracy and precision. The detection limit (99.7% confidence level), sampling rate and coefficient of variation (n = 10) were estimated as 15 μg L⁻¹, 25 measurements per hour and 4.0%, respectively. The proposed procedure involves a reduced effluent generation (3.6 mL per determination) and consumes micro amounts of reagents.     

A novel method for the simultaneous determination of Pb (II), Cd (II) and Zn (II) in environmental water samples

A novel UV-VIS spectrophotometric method was developed in this study by using solid phase extraction procedure for the simultaneous preconcentration, separation and determination of trace levels of Pb (II), Cd (II) and Zn (II) ions in various water samples by using Amberlite N,N-bis(salicylidene)cyclohexanediamine (SCHD) resin. This study presents the results of experimental procedures carried out like the adsorption of analytes to the resin, influences of some analytical parameters that effect the recovery such as pH, sample volume, sample flow rate, eluent type and concentration, eluent volume, eluent flow rate and the effects of alkaline metals, earth alkaline metals and some other transition metals. The analytes in the samples with the adjusted pH range of 4–7 were adsorbed on XAD-4-SCHD resin and eluted by using 1.0 mol L^?1 nitric acid. The amounts of ions were determined by using UV-VIS spectrometer. The limits of detection were 0.03, 0.07 and 0.05 µg mL^?1 for Pb (II), Cd (II) and Zn (II), respectively. The accuracy of the method was assured by the analysis of the certified standard water sample NW-TMDA-70.2 and the observed recoveries were above 93%. Different environmental water samples that contain trace amounts of Pb (II), Cd (II) and Zn (II) were analysed by using the method developed in this study. Same samples were also analysed by ICP-MS for comparison and almost the similar results were observed. The method developed in this study was successfully applied to the various environmental water samples to determine the trace levels of Pb (II), Cd (II) and Zn (II) ions.     

Selective flow-injection determination of methanol in the presence of ethanol based on a multi-enzyme system with chemiluminescence detection

A highly selective flow-injection system was developed for the determination of methanol. The system consisted of three immobilized enzymes with luminol chemiluminescence detection. First, methanol was oxidized in the presence of alcohol oxidase to yield formaldehyde and hydrogen peroxide. The hydrogen peroxide produced was then destroyed by catalase. The formaldehyde formed in the first stage was further oxidized by NAD⁺-formaldehyde dehydrogenase. The NADH formed was oxidized by 1-methoxy-5-methylphenazinium methylsulphate (1-MPMS), and finally the reduced 1-MPMS was spontaneously oxidized and hydrogen peroxide was produced. The concentration of the hydrogen peroxide produced, which was proportional to the initial concentration of methanol, was determined by luminol chemiluminescence. The determination range was from 0.1 to 100 mg l⁻¹ and the response time was less than 2 min per sample with a relative standard deviation of less than 3%. The system showed good selectivity for methanol; the response was ca. 50 times higher than for ethanol.     

A novel method for the determination of tiopronin by using potassium ferricyanide as spectroscopic probe reagent in pharmaceutical and urine samples

In this paper, a novel method has been established to determine tiopronin using potassium ferricyanide as spectroscopic probe reagent. It has been demonstrated that Fe(III) is reduced to Fe(II) by tiopronin, and the in situ formed Fe(II) reacts with potassium ferricyanide to form soluble Prussian blue. Beer’s law is obeyed in the range of tiopronin concentration of 0.040–9.00 μg/mL at the maximal absorption wavelength of 735 nm. The linear regression equation is A = 0.0153 + 0.1605c (μg/mL) with a correlation coefficient of 0.9997 and the apparent molar absorption coefficient of 2.6 × 10⁴ L/mol cm. The detection limit is 0.030 μg/mL and RSD is 1.3%. The parameters with regard to determination have been optimized and the reaction mechanism has been discussed. This method has been successfully applied to determine tiopronin in pharmaceutical and urine samples with satisfactory results.     

Kinetic spectrophotometric method as a new strategy for the determination of vitamin B9 in pharmaceutical and biological samples

In this study, a new method is proposed for the determination of trace amounts of folic acid (vitamin B(9)). This method is based on the inhibitory effect of folic acid on the reaction of Thionine and bromate in sulfuric acid media. The reaction can be monitored spectrophotometrically by measuring the decrease in absorbance at 601 nm (λ(max)). The effective variables on the reaction rate were investigated. Under optimum experimental conditions, the method allows to determine of the folic acid in a wide linear range with two linear segments. The limit of detection was 0.36 μg mL(-1) of folic acid. Relative standard deviations of six replicate determinations of 5.0 and 50.0 μg mL(-1) of folic acid were 1.18 and 1.02%, respectively. The interfering effect of the different species was also investigated. The method was evaluated by quantifying of folic acid in biological and pharmaceutical samples with satisfactory assay results.     

Use of ion-molecule reactions and methanol addition to improve arsenic determination in high chlorine food samples by DRC-ICP-MS

Direct determination of trace arsenic in high chlorine food samples by ICP-MS is complicated by the presence of ArCl⁺ interferences, and the high first ionization energy of As (9.81 eV) also results in low analytical sensitivity in ICP-MS. In this work, two strategies based on ion-molecule reactions were successfully used to eliminate ArCl spectral interference in a dynamic reaction cell (DRC). The interference ion (⁴⁰Ar³⁵Cl⁺) was directly removed by the reaction with methane gas, and the background signal was reduced by up to 100-fold at m/z 75. Alternatively, by using molecule oxygen as the reaction gas, ⁷⁵As⁺ was effectively converted to ⁷⁵As¹⁶O⁺ that could be detected at m/z 91 where the background is low. The poor signal intensity of As or AsO was improved 3-4 times by addition of 4% methanol in the analyzed solutions. The limit of quantitation (LOQ) for ⁷⁵As (CH₄-DRC method) and ⁷⁵As¹⁶O (O₂-DRC method) was 0.8 and 0.3 ng g⁻¹ and the analytical results of seaweed and yellow croaker standard reference materials were in good agreement with the certified values. As the routine arsenic monitoring method in our laboratory, it was applied to the accuracy determination of 119 high chlorine food samples from eight different markets of Beijing.     

Determination of nimesulide in pharmaceutical and biological samples by a spectrophotometric method assisted with the partial least square method

A simple and sensitive spectrophotometric method for the determination of nimesulide in bulk, in pharmaceutical dosage form, and in biological fluids was developed. The method is based on the reduction of the nitro group of nimesulide by zinc and hydrochloric acid followed by diazotization, and coupling with orcinol in basic medium to form a stable chromophore, which absorbs at 465 nm. The method showed a good linearity in the range 0.4–4.0 μg mL^?1. Partial least square modeling as a powerful multivariate statistical tool is also applied, compiled, and compared for determination of nimesulide. The experimental matrix for the partial least square calibration method was designed with 24 samples. The cross-validation was used for selecting the number of factors. The root mean square error prediction (RMSEP) and the relative error of prediction (REP %) were 0.089 and 3.95, respectively. The developed method is free from the interference of common excipients used in pharmaceutical dosages. The method was also used for the determination of nimesulide in pharmaceutical dosages as well as in human serum and urine samples.     

Multivariate optimisation of a rapid and simple automated method for bismuth determination in well water samples exploiting long path length spectrophotometry

An automated spectrophotometric system is proposed for the determination of bismuth in well water samples, using multi-syringe flow injection analysis (MSFIA) and exploiting a liquid waveguide capillary cell (LWCC). This method is based on the colorimetric reaction of bismuth and methylthymol blue (MTB) in the presence of polyvinylpyrrolidone (PVP) in acid medium (0.1 mol L^?1 HNO₃). The Bi(III)–MTB complex was measured at 600 nm. The method was optimised by multivariate techniques. Some figures of merit of the proposed system are worth being highlighted, such as its wide linear working range (between 4.9 and 600 μg L^?1), its low detection limit (1.5 μg L^?1 of bismuth) and its high intra-day precision and inter-day precision (0.7% (n = 12) and 1.4% (n = 5), respectively, both expressed as RSD). Moreover, a high injection frequency of 30 h^?1 is achieved, as the proposed analyser is a powerful tool for fast Bi(III) determination. The method developed was successfully validated by analysing reference samples (pharmaceutical samples) by comparing the results with those obtained by ICP-OES and it was satisfactorily applied to well water samples. Besides, the present system is miniaturised allowing in situ measurements in control processes and field analysis.     

Preconcentration and determination of boron in milk,infant formula,and honey samples by solid phase extraction-electrothermal atomic absorption spectrometry

This work presents alternative procedures for the electrothermal atomic absorption spectrometric determination of boron in milk, infant formulas, and honey samples. Honey samples (10% m/v) were diluted in a medium containing 1% v/v HNO₃ and 50% v/v H₂O₂ and introduced in the atomizer. A mixture of 20 µg Pd and 0.5 µg Mg was used for chemical modification. Calibration was carried out using aqueous solutions prepared in the same medium, in the presence of 10% m/v sucrose. The detection limit was 2 µg g^− 1, equivalent to three times the standard error of the estimate (s_y/x) of the regression line. For both infant formulas and milk samples, due to their very low boron content, we used a procedure based on preconcentration by solid phase extraction (Amberlite IRA 743), followed by elution with 2 mol L^− 1 hydrochloric acid. Detection limits were 0.03 µg g^− 1 for 4% m/v honey, 0.04 µg g^− 1 for 5% m/v infant formula and 0.08 µg mL^− 1 for 15% v/v cow milk. We confirmed the accuracy of the procedure by comparing the obtained results with those found via a comparable independent procedure, as well by the analysis of four certified reference materials.     

Determination of methanol in o,o-dimethyldithiophosphoric acid (DMDTPA) of technical grade by UV/vis spectrophotometry and by HPLC

Two procedures are proposed in this work for the determination of methanol impurities in o,o-dimethyldithiophosphoric acid (DMDTPA). To avoid possible interferences from the main component, DMDTPA was precipitated in the form of insoluble lead complex. Free Pb(II) ions were eliminated with sulfuric acid and methanol was oxidized to formaldehyde with potassium permanganate in methanesulfonic acid medium. Finally, the excess of oxidizing agent was neutralized with saturated sodium oxalate. The above pretreatment procedure was identical for spectrophotometric assay and for chromatographic determination. In the first case, the solution obtained was treated with Nash reagent to form 3,5-diacetyl-1,4-dihydrolutidine (λ_max = 415 nm). In the calibration range 0.1-1.0% (methanol in DMDTPA), the analytical figures of merit were: R² = 0.9993, quantification limit 0.02% methanol in DMDTPA coefficient of variance (n = 5) for 0.1% and 0.4% methanol respectively 6.7% and 2.4%. Recoveries obtained in the sample fortified with 0.1, 0.2, 0.4% of methanol (in DMDTPA) were in the range 99-105%. For chromatographic procedure, formaldehyde was derivatized with 2,4-dinitrophenylhydrazine and separation was achieved on Luna C18(2) column using the isocratic elution with acetonitrile-water (70:30, v/v) and spectrophotometric detection at 360 nm. In the calibration range 0.05-0.25% (methanol in DMDTPA), R² was always higher than 0.999, the quantification limit was 0.004% and the recoveries in these same fortified samples in the range 98-101%. No statistically significant differences were observed between the results obtained in the analysis of technical grade DMDTPA by the two procedures (ANOVA, p < 0.05)     

A method for the determination of tritium distribution in environmental and biological samples

A method for the determination of the tritium distribution in environmental and biological samples is described. Tritium as HTO is removed by freeze-drying and the residue is combusted to obtain organically bound tritium. Each tritium fraction is electrolytically enriched and determined by liquid scintillation spectrometry. Enrichment and large sample sizes are required due to the low environmental tritium levels. During the analyses of more than 600 samples over a two-year period all aspects of the method (freeze-drying, combustion, enrichment and counting) have provided reproducible and precise results.