Facilitated Cd(II) transport across CTA polymer inclusion membrane using anion (Aliquat 336) and cation (D2EHPA) metal carriers

PIMs have been involved as affinity membranes for recovery of metals (Cd, Pb, Zn) by facilitated transport from aqueous solutions under different speciation forms, either anionic or cationic. The motivation of this work is to compare the efficiency of the recovery process in the case of Cd(II) using extractants such as D2EHPA and Aliquat 336 that can form complexes with the cation Cd²⁺ or the anions CdCl₃⁻ and CdCl₄²⁻, respectively. The maximal Cd(II) recovery factors obtained in 8 h are 97.5% and 91.8% with D2EHPA and Aliquat 336, respectively. Although the transport fluxes with both carriers are not strongly different (ca. 2 μmol m⁻² s⁻¹), the recovery process in case of mixture of metals is better achieved with Aliquat 336. PIMs have shown a very good stability and a constancy of the transmembrane transport flux over 12 replicate measurements, each one lasting for 8 h repeated every 24 h.     

Separation of Ga(III) from Cu(II), Ni(II) and Zn(II) in aqueous solution using synthetic polymeric resins

Poly (acrylamide-acrylic acid-dimethylaminoethylmethacrylate), p(AM-AA-DMAEM) and Poly(acrylamide-acrylic acid)-ethylenediaminetetracetic acid disodium, p(AM-AA)-EDTANa₂ were prepared by gamma radiation-induced template polymerization technique and used for the separation of Ga (III) from Cu (II), Ni (II), and Zn (II) in aqueous media. The effect of pH and contact time on the separation process was studied. The optimum pH value for the separation process is 3–3.5. The result shows that Ga (III) is first extracted while Cu (II), Ni (II) and Zn(II) are slightly extracted at this pH value. The recovery of metals using HCl, HNO₃ and H₂SO₄ has been studied. The resins may be regenerated using 2M HCl solutions.      

Selective solid-phase extraction of nickel(II) using a surface-imprinted silica gel sorbent

A new Ni(II)-imprinted amino-functionalized silica gel sorbent with excellent selectivity for nickel(II) was prepared by an easy one-step reaction by combining a surface imprinting technique for selective solid-phase extraction (SPE) of trace Ni(II) in water samples prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Ni(II). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Ni(II) was 12.61 and 4.25 mg g⁻¹, respectively. The relatively selective factor (α_r) values of Ni(II)/Cu(II), Ni(II)/Co(II), Ni(II)/Zn(II) and Ni(II)/Pd(II) were 45.99, 32.83, 43.79 and 28.36, which were greater than 1. The distribution ratio (D) values of Ni(II)-imprinted polymers for Ni(II) were greatly larger than that for Cu(II), Co(II), Zn(II) and Pd(II). The detection limit (3σ) was 0.16 ng mL⁻¹. The relative standard deviation of the method was 1.48% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08618 and GBW 08402), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace nickel in plants and water samples with satisfactory results.     

Solvent extraction studies of cobalt(II) by capric acid from sodium sulfate solution

The extraction of cobalt(II) from sulfate medium of ionic strength 0.33?mol dm^?3 by capric acid dissolved in chloroform has been carried out at 25°C. By using the slope analysis method, the stoichiometry of the organometallic complex extracted was determined. Cobalt(II) complex exists as a mononuclear species CoL₂.2HL in the lower concentration region of capric acid and a binuclear ones (CoL₂.2HL)₂ in the higher concentration region. Extraction constants for each species were given. UV–visible and FTIR spectroscopy have also been used for the investigation of the extractant and their complexes. Electronic spectrum of cobalt(II) caprate species indicates the octahedral structure.     

Studies on extraction of chromium (VI) from acidic solutions containing various metal ions by emulsion liquid membrane using Alamine 336 as extractant

The extraction of chromium (VI) ions from acidic solutions containing various metal ions by emulsion liquid membrane (ELM) was studied. Liquid membrane consists of a diluent, a surfactant, and an extractant. 0.5 M ammonium carbonate solution was used as stripping solution. Effects of acid concentration in feed solution, type and concentration of stripping solution, mixing speed, surfactant concentration, phase ratio and the influence of membrane characteristics were studied and optimum conditions were determined. Under the optimum conditions, extraction of chromium (VI) was tested and it was possible to selectively extract 99% of chromium from the acidic feed solution. This study also examined the effect of extractant concentration and acid type in the feed solution on the extraction of Cr (VI) ions and almost all of Cr (VI) from the acidic feed solution containing 500 mg/L from each of Co (II), Ni (II), Cd (II), Zn (II), and Cu (II) ions, and 100–500 mg/L Cr (VI) was extracted within 5–10 min.     

Synthesis, crystal structure and properties of cobalt(II) and nickel(II) coordination polymers supported by functionalized dicarboxylate ligands

Four new coordination polymers of cobalt(II) and nickel(II) with functionalized dicarboxylate ligands, namely, [Co^IIL¹(2,2′-bpy)(H₂O)] (1), [Ni^IIL¹(2,2′-bpy)(H₂O)]·H₂O (2), [Co^II₂(L²)₂(2,2′-bpy)₂(H₂O)] (3) and [Ni^II₂(L²)₂(2,2′-bpy)₂(H₂O)] (4), where H₂L¹ = 2,5-dibenzoylterephthalic acid, H₂L² = 4,6-bis(4-methylbenzoyl)isophthalic acid and 2,2′-bpy = 2,2′-bipyridine, were synthesized and characterized by elemental analysis, IR spectra and thermogravimetric analysis. Complex 1 exhibits a zigzag chain with a C–Hπ interaction between the phenyl ring proton and the phenyl ring of an adjacent chains to form a 2D supramolecular sheet. Complex 2 contains two helical chains which extend into 2D via a C–Hπ interaction between the pyridine ring proton and the pyridine ring. Complexes 3 and 4 are isomorphous with helical chains that extend in the same direction and further link to one another by supramolecular forces into a 2D structure. Moreover, magnetic and luminescence properties have been investigated for 1 and 2, respectively.     

Diffusion of small molecules through modified poly(vinyl chloride) membranes

The transport properties of a set of four copolymers based on poly(vinyl chloride) (PVC) have been studied. The nucleophilic substitution of chlorine atoms with 4‐mercaptophenol sodium salt, 2‐thionaphthalene, 4‐(1‐adamantyl) thiophenol, and thiophenolate sodium salt as the nucleophiles has been performed, from low conversion levels (3%) to high levels (40%), and the permeability, solubility, and diffusivity of oxygen, nitrogen, carbon dioxide, and methane have been measured. The introduction of bulky groups to the PVC chain leads to chain separation and results in large increases in the free volume at conversions up to 10%. This brings about a 5‐fold increase in the diffusion coefficients that is almost independent of the bulkiness of the substituent. Solubility is little affected and instead tends to decrease as substitution progresses. The substitution of more than 10% of the chlorine atoms does not result in an improvement in the transport properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 964–971, 2002     

Determination of butyltin and octyltin stabilizers in poly(vinyl chloride) products by headspace solid-phase microextraction and gas chromatography with flame-photometric detection

Headspace solid-phase microextraction (HS-SPME) and gas chromatography with flame photometric detection (GC-FPD) have been investigated for determination of butyltin and octyltin stabilizers in poly(vinyl chloride) (PVC) products. The organotin stabilizers were first released from the plastic matrix by dissolving the PVC sample in tetrahydrofuran (THF). The stabilizers were then hydrolyzed to the chloride forms, by treatment with 6 mol L⁻¹ HCl, then derivatized with sodium tetraethylborate (NaBEt₄) in 0.2 mol L⁻¹ sodium acetate buffer (pH 4.5) at 50 °C. HS-SPME was performed with a fused-silica fiber coated with a 100-μm film of polydimethylsiloxane (PDMS). The collected organotin compounds were then desorbed in the GC injector at 280 °C and analyzed by GC-FPD. Linearity (r≥0.994) over a concentration of approximately two orders of magnitude was usually obtained. Limits of quantitation (LOQ) of the four organotin compounds studied, viz., monobutyltin (MBT), dibutyltin (DBT), monooctyltin (MOT), and dioctyltin (DOT), were in the range 0.3–1.0 ng Sn mL⁻¹. Recovery was >90% for butyltins and >80% for octyltins. The method was validated by analyzing two reference standard PVC sheets with known organotin content. The applicability of the method to analysis of organotin stabilizers in commercial PVC products was also demonstrated.     

Synthesis and crystal structure of polymer cobalt(II) complex, 1,2,4,5-benzenetetracarboxylate hexaimidazole tetraaqua cobalt (II) tetrahydrate

The crystal structure of the title complex {[Co(TCB)2/2-(IMI)2(H2O)2][Co(IMI)4(H2O)2] } (H2O)4 (where TCB = 1,2,4,5-benzenetetracarboxylic anion; IMI = imidazole) has been determined by X-ray diffraction method. Crystal data for {[Co(TCB)2/2(IMI)2(H2O)2][Co(IMI)4(H2O)2]}-(H2O)4: triclinic, space group P 1, a = 1.0647(2) nm, b = 1.1165(1)nm,c = 1.00361(1)nm,α = 91.56(1)°,β = 111.34(1)°, γ = 115.642(10)°, V = 0.9772(3) nm5, Z = 1. The polymer cobalt (II) complex has a novel three-dimension network structure. Co(1) atom and Co(2) atom both are coordinated in an octahedral arrangement and located in the center of the coordination anion and the center of the coordination cation, respectively. Moreover four carboxyl groups of TCB are divided into two types, two para-carboxyl groups bridge Co(1) atom in monodentate fashion and other two para-carboxyl groups are in free.     

Formation of crystalline inclusion compounds of poly (vinyl chloride) of different stereoregularity with γ-cyclodextrin

This work reports the formation and detailed characterization of the γ-cyclodextrin (γ-CD) inclusion compounds (ICs) formed with two poly (vinyl chloride) samples with different isotactic content. The ICs were characterized by X-ray diffraction, solid state ¹³C-NMR, solution ¹H-NMR, FT-infrared, differential scanning calorimetry, and thermogravimetric analysis. Experimental evidence of the inclusion of the guest polymer chains into the narrow channels created by the γ-CD crystalline host lattice has been obtained. Examination of coalesced poly (vinyl chlorides) (PVCs) obtained after the host γ-CD is removed reveals different characteristics specifically for the coalesced PVC sample with higher isotactic content. An increase in T_g was observed by DSC for this PVC. To the contrary, the T_g of the coalesced PVC sample with lower isotactic content is almost the same as that of the as-synthesized sample. Thermogravimetric analysis indicated that coalesced PVC with higher isotactic content acquires a degree of stabilization after modification by threading into and being extracted from its γ-CD IC. The results suggest that an irreversible conformational change takes place when PVC forms ICs with a solid host lattice like γ-CD. The PVC molecules extend and reorganize into a more stable conformation in the IC, consequently improving the properties of the coalesced sample. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2503–2513, 2007     

Flash photolysis studies of charge-transfer photochemistry of nickel(II) and cobalt(III) complexes

The photochemical behavior of cobalt(III) and nickel(II) complexes on excitation in the charge-transfer bands is reviewed in this article with particular reference to the study of intermediates. Investigations on the photoredox reactions of cobalt(III) and nickel(II) complexes using flash kinetic spectroscopic methods reveal details on the characteristics of the intermediates produced from the charge-transfer excited states of these metal complexes. The reactive species produced on photolysis of cobalt(III)-amine complexes activate molecular oxygen, producing mononuclear and dinuclear dioxygen species coordinated as superoxo and peroxo forms. Cobalt(III)-amino-acid complexes on photolysis lead to the formation of cobalt(III)-alkyl complexes which are identified as transients. The spectra and the decay kinetics are described with the view to elucidate mechanistic details. Nickel(II) macrocyclic complexes on excitation in the charge-transfer bands lead to oxidation of the metal centre. Scavenging experiments using dioxygen, alcohols and acids were carried out to understand the mechanistic details.     

聚氯乙烯支载三氯化铁试剂催化醛与乙酸酐反应合成 乙酰缩醛

聚氯乙烯支载三氯化铁(PVC-FeCl3)试剂在室温条件下能方便快速催化各类醛与乙酸酐反应,以良好产率(75%～96%)生成相应乙酰缩醛。     

Analysis of poly(vinyl chloride) additives by supercritical fluid extraction and gas chromatography

The use of supercritical fluid extraction (SFE) is growing, with an expanding range of applications in many different fields as a consequence of its advantages compared with traditional extraction methods. In order to develop an analytical method to determine dibutyl phthalate (DBP) and dioctyl phthalate (DOP) traces (<20 ppm) in flexible poly(vinyl chloride) (PVC) formulations, a maximum efficiency in the extractive process and an adequate separative system are needed to avoid interferences between these two plasticizers and other additives that could be present at high concentrations in flexible PVC formulations. In order to determine the optimum SFE conditions, the extraction time, temperature and pressure were controlled. The separation and quantitation of individual components in the PVC extracts were carried out off-line by using a semicapillary column in gas chromatography (GC). Samples with different DOP content (41.18%, 33.33% and 23.08%) and DBP content (41.18%), as well as samples with both plasticizers (20.59% DOP and 20.59% DBP) were prepared. Some other samples were also prepared to study detection limits for these two PVC additives. Recoveries and reproducibilities were studied in every sample. Finally, this method was compared with Soxhlet liquid extraction. Determination by gravimetric analysis of the total extracted material was found to be particularly suitable for PVC. This study demonstrates the potential of SFE to shorten extraction times with similar or even better extraction efficiencies compared with traditional liquid methods.     

Separation of copper(II) and aluminium(III) from fresh waters by solid phase extraction on a complexing resin column

The solid‐phase extraction (SPE) of copper(II) and aluminium(III) from fresh waters on an ion‐exchange complexing resin containing iminodiacetic groups (Chelex 100) has been examined. Quantitative recovery of the metal ions was related to the breakthrough profile that, for some samples, could not be evaluated directly. A method is suggested for evaluation, instead, of the sorption curves, on the basis of passing different volumes of sample through the column. This enables evaluation of important properties, for instance the central point of the breakthrough curve, V_f. The column used was a small one, containing 0.10 g dry Chelex 100. The metal ion was eluted with a small volume of acid solution, 10 mL of 0.5 mol L^–1 HNO₃; this resulted in good preconcentration factors. For copper(II) it was found that fresh waters of similar composition could have different V_f in the same column. This was ascribed to different reaction coefficients (α_M(I)) of copper(II) in the considered samples, which affects V_f. By use of the proposed SPE procedure it is possible to evaluate the reaction coefficient of copper(II). The values of α_M(I) for two different drinking waters at pH 7.7 were found to be 3.70×10¹² and less than 4.40×10¹¹. Similar results were obtained for aluminium(III).     

Crystal structure, spectroscopy and magnetism of trinuclear nickel(II), cobalt(II) complexes and their solid solution

Four new complexes [Ni₃(μ-L)₆(H₂O)₆](NO₃)₆·6H₂O (1), [Co₃(μ-L)₆(H₂O)₆](NO₃)₆·6H₂O (2), [Ni₃(μ-L)₆(H₂O)₄(CH₃OH)₂](NO₃)₆·4H₂O (3), [Co₃(μ-L)₆(H₂O)₄(CH₃OH)₂](NO₃)₆·4H₂O (4) (L = 4-amino-3,5-dimethanyl-1,2,4-triazole) were synthesized and structurally characterized by X-ray single-crystal diffraction. The structural analyses show that complex 1 and 2 are isomorphous; complex 3 and 4 are isomorphous. Four complexes all consist of the linear trinuclear cations ([M₃(μ-L)₆(H₂O)₆]⁶⁺ (M = Ni,Co) for 1 and 2; [M₃(μ-L)₆(H₂O)₄(CH₃OH)₂]⁶⁺ (M = Ni,Co) for 3 and 4), NO₃⁻ anions and crystallized water molecules. In the trinuclear cations, the central M(II) ions and two terminal M(II) ions are bridged by three triazole ligands. Other eleven solid solution compounds which are isomorphous with complex 3 and 4 were obtained by using different ratio of Ni(II) and Co(II) ions as reactants and ICP result indicates that ligand L has higher selectivity of Ni(II) ions than that of Co(II) ions. The magnetic analysis was carried out by using the isotropic spin Hamiltonian ? = −2J(?₁?₂ + ?₂?₃) (for complexes 1 and 3) and simultaneously considering the temperature dependent g factor (for complexes 2 and 4). Both the UV-Vis spectra and the magnetic properties of the solid solutions can be altered systematically by adjusting the Co(II)/Ni(II) ratio.     

Preparation and structural characterization of nickel(II), cobalt(II), zinc(II) and tin(IV) complexes of the isatin Schiff bases of S-methyl and S-benzyldithiocarbazates

The molecular structures of the isatin Schiff bases of S-methyldithiocarbazate (Hisasme) and S-benzyldithiocarbazate (Hisasbz) have been determined by X-ray diffraction and their complexes of general formula [ML₂]·n(solvate) [M = Co²⁺, Ni²⁺, Zn²⁺; L = anionic forms of Hisasme or Hisasbz; solvate = DMF, DMSO; n = 1, 2] and [Sn(L)Ph₂Cl]·nMeOH (n = 0, 1) have been synthesized and characterized by a variety of physicochemical techniques and X-ray diffraction. The bis-ligand complexes, [Ni(isasbz)₂]·2DMSO and [Co(isasme)₂]·DMF have a six-coordinate, distorted octahedral geometry with the two uninegatively charged tridentate ONS ligands coordinated to the metal ions meridionally via the amide O-atoms, the azomethine nitrogen atoms and the thiolate sulfur atoms. By contrast, the crystal structure of [Zn(isasbz)₂]·2DMF shows a four-coordinate distorted tetrahedral geometry with the two Schiff bases coordinated as NS bidentate ligands via the azomethine nitrogen atoms and the thiolate sulfur atoms. Steric constraints of the rigid tridentate ligands lead to unusual ‘pseudo-coordination’ of the O-donors which occupy sites close to the metal but too distant to be considered as true coordinate bonds.The crystal structures of the tin(IV) complexes [SnLPh₂Cl]·nMeOH (L = isasme and isasbz; n = 0, 1) also show that the Schiff bases act as monoanionic bidentate NS chelating agents coordinating the tin(IV) ion via the azomethine nitrogen atoms and the thiolate sulfur atoms, the tin atom in each complex is five-coordinate with a highly distorted geometry intermediate of square pyramidal and trigonal bipyramidal. Again Sn?O contacts are weak and do not qualify as coordinate bonds.     

Electrical conductivity of poly(vinyl chloride) obtained by photodehydrochlorination from laminated poly(vinyl chloride)/polypyrrole films

Poly(vinyl chloride) (PVC) has been converted to an electrically conductive structure by combined electrochemical and photochemical methods. PVC was cast on a polypyrrole (PPy) film electrode which had been electrochemically prepared. The PVC layer in the laminated PVC/PPy films was first dehydrochlorinated under the illumination of UV light, and the generated polyenes were subsequently doped with I₂ and FeCl₃. The maximum electrical conductivity achieved for such PVC film was 2.51 X 10^?2 and 8.63 10^?2 S cm^?1 after I₂ and FeCl₃ doping, respectively. The temperature dependence of the electrical conductivity showed different behavior in higher and lower temperature ranges. In the former (T > 243 K), the T^?1 law held, and the activation energy and bandgap were estimated as 0.25 and 0.49 eV, respectively. In the latter (T < 243 K), the conductivity mechanism followed the variable range hopping model (T^?1/4 law) in which the radius of the localized state wave function and the density of the localized states at the Fermi level were 1.25 × 10³ Å and 1.03 X 10¹⁵ eV^?1 cm^?3, respectively. © 1995 John Wiley & Sons, Inc.     

FT-IR-Spectroscopic investigation of the mechanism of membrane extraction of cobalt(II) from HCl solutions by solutions of tri-n-octylamine inn-decane

The extraction of cobalt(II) from aqueous HCl by tri-n-octylamine (TOA) inn-decane is investigated by means of FT-IR spectroscopy. The sharp increase in cobalt(II) transport during its membrane extraction from a HCl solution by solutions of TOA in a narrow interval of extradant-carrier concentrations is explained by a change in the transport mechanism which seems to differ from the diffusion and relay mechanisms.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1539–1544, September, 1993.     

Equilibrium and Kinetic Aspects of Hg(II) Extraction from Natural Waters with Diphenylthiocarbazone

A diphenylthiocarbazone (dithizone) based liquid-liquid extraction method of general utility is proposed for small-scale Hg(II) extraction from natural waters. The quantitative aspects related to the extraction are studied in terms of distribution of mercury dithizonate in carbon tetrachloride-water system at 293 K (20±1°C). Various distribution constants related to the reagent and the complex formed are evaluated. The equilibrium and kinetic studies of extraction and complex formation are analytically based on atomic absorption and colorimetric methods. Local natural waters were subjected to the proposed method for Hg(II) removal. The method is found to be capable of removing above 98% mercury in a single-step extraction under the conditions evaluated in terms of matrix pH, equilibration time and amount of reagent.