Construction and evaluation of a hermetically sealed accurate ion mobility instrument

Ion mobility spectrometry (IMS) is widely used to detect and identify chemical warfare agents, narcotics, and explosives in the field based on their reduced mobility (K ₀ ) values. Current detection windows for these analytes can only be as narrow as ±2% of the K ₀ values for the analyte being sought. These wide detection windows cause false positive alarms when an interferent with a similar reduced mobility falls within the detection window and triggers an alarm. This results in the loss of time and money as resources are diverted to verify the alarm. A high rate of false positive alarms is caused by a discrepancy in the reported K ₀ values across the literature that is, at best, ± 2% of the average available values. By accurately and precisely measuring the variables affecting an ion’s K ₀ value, an accurate K ₀ value can be produced and the detection windows widths that are established using these reference values can be reduced. Components for accurate analyses have been assembled in the past and here the construction of an accurate ion mobility spectrometry drift tube is described that is accurate to 0.1% of the calculated K ₀ value and can be hermetically sealed without inserting the drift tube into a large vacuum chamber. Having a pressure sealed accurate ion mobility spectrometer will allow for the control of the pressure variable within the K ₀ equation and the safe analysis of hazardous chemicals. Here the construction of an inexpensive and easily reparable sealed drift tube is described.     

Separation of sarcosine and L-alanine isomers using corona discharge ion mobility spectrometry

The capability of corona discharge ion mobility spectrometry (CD-IMS) for separation and quantification of sarcosine and L-alanine isomers has been evaluated for the first time. Although these two compounds have the same mass and m/z values in mass spectrometer, ion mobility spectrometry was able to separate and determine them. Variables including carrier gas flow rate, injection and cell temperatures were optimized. The reduced mobilities (K ₀) of sarcosine and L-alanine were 1.96 and 1.83, respectively, based on the reduced mobility of nicotinamide. At the optimized conditions the detection limit of sarcosine and L-alanine were 0.7 and 0.9 μg/mL, respectively. The relative standard deviation (RSD) was found to be 6%. Furthermore, a sample injection port of a gas chromatograph was also modified to introduce solvent-free samples into the IMS.     

Reduced ion mobilities of aspartame,cortisone, betamethasone,butylparaben, propylparaben and vanillin

Electrospray ionization IMS coupled to quadrupole mass spectrometry was used to calculate the reduced ion mobilities of aspartame, cortisone, betamethasone, butylparaben, propylparaben and vanillin, a set of organic compounds used as drugs or food additives using 2,6-ditert-butylpyridine (DTBP) as a chemical standard. The K_0’S of these compounds in the literature are either unavailable or unreliable. The importance of using chemical standards to calibrate the ion mobility scale and the use of correct experimental temperatures to calculate ion mobilities are stressed.     

Chemical standards in ion mobility spectrometry

Positive ion mobility spectra for three compounds (2,4-dimethylpyridine (2,4-DMP, commonly called 2,4-lutidine), dimethyl methylphosphonate (DMMP) and 2,6-di-t-butyl pyridine (2,6-DtBP)) have been studied in air at ambient pressure over the temperature range 37-250 °C with (H₂O)_nH⁺ as the reactant ion. All three compounds yield a protonated molecule but only 2,4-dimethylpyridine and dimethyl methylphosphonate produced proton-bound dimers. The reduced mobilities (K₀) of protonated molecules for 2,4-dimethylpyridine and DMMP increase significantly with increasing temperature over the whole temperature range indicating changes in ion composition or interactions; however, K₀ for the protonated molecule of 2,6-di-t-butyl pyridine was almost invariant with temperature. The K₀ values for the proton-bound dimers of 2,4-dimethylpyridine and DMMP also showed little dependence on temperature, but could be obtained only over an experimentally smaller and lower temperature range and at elevated concentrations. Chemical standards will be helpful as mobility spectra from laboratories worldwide are compared with increased precision and 2,6-di-t-butyl pyridine may be a suitable compound for use in standardizing reduced mobilities. The effect of thermal expansion of the drift tube length on the calculation of reduced mobilities is emphasized.     

High-performance ion mobility spectrometry with direct electrospray ionization (ESI-HPIMS) for the detection of additives and contaminants in food

High-performance ion mobility spectrometry (HPIMS) with an electrospray ionization (ESI) source detected a series of food contaminants and additive compounds identified as critical to monitoring the safety of food samples. These compounds included twelve phthalate plasticizers, legal and illegal food and cosmetic dyes, and artificial sweeteners that were all denoted as detection priorities. HPIMS separated and detected the range of compounds with a resolving power better than 60 in both positive and negative ion modes, comparable to the commonly used high-performance liquid chromatography (HPLC) methods, but with most acquisition times under a minute. The reduced mobilities, K₀, have been determined, as have the linear response ranges for ESI-HPIMS, which are 1.5–2 orders of magnitude for concentrations down to sub-ng μL⁻¹ levels. At least one unique mobility peak was seen for two subsets of the phthalates grouped by the country where they were banned. Furthermore, ESI-HPIMS successfully detected low nanogram levels of a phthalate at up to 30 times lower concentration than international detection levels in both a cola matrix and a soy-based bubble tea beverage using only a simplified sample treatment. A newly developed direct ESI source (Directspray) was combined with HPIMS to detect food-grade dyes and industrial dye adulterants, as well as the sweeteners sodium saccharin and sodium cyclamate, with the same good performance as with the phthalates. However, the Directspray method eliminated sources of carryover and decreased the time between sample runs. Limits-of-detection (LOD) for the analyte standards were estimated to be sub-ng μL⁻¹ levels without extensive sample handling or preparation.     

Response of halogenated compounds in ion mobility spectrometry depending on their structural features

Ion mobility spectrometry (IMS) with handheld and transportable devices permits the sensitive detection of chlorinated compounds which are important in environmental monitoring. The ion mobility spectra in negative measuring modus mostly show one product ion peak [(H₂O)_nCl⁻] due to dissociative electron attachments. In this paper, we investigated relevant chlorinated compounds (R-Cl) where R represents allyl-, benzyl-, phenyl-, alkyl- and vinyl-groups. These groups cause differences in the R-Cl bond strength and differences in the cleavage of chlorine can therefore be expected. All chlorinated substances investigated provide the same product ion peak at 2.75 cm² Vs⁻¹ independent on the different C-Cl bond strength. However, distinct influences of structural features on the peak intensities of the (H₂O)_nCl⁻ product ion peak were established. Generally, increasing sensitivities were obtained in the order chlorobenzenes < vinyl- < allyl- < alkyl compounds < benzylchlorides. Sensitivities and limits of detection (LODs) of aromatic compounds depend on the nature and position of second substituent. Electron-withdrawing substituents (chlorine, fluorine, nitrile) enhance sensitivity while electron-repelling substituents decrease it. A dependence of sensitivity on the chain length or ring size can be observed for alkyl compounds. Additional influences of intramolecular interactions on the sensitivity were found for di-halogenated compounds. Therefore, the quantification of negative product ion peaks of chlorinated compounds requires a consideration of structural features of analytes.     

Evaporation of ionic liquids at atmospheric pressure: study by ion mobility spectrometry

A conventional ion mobility spectrometry (IMS) was used to study atmospheric pressure evaporation of seven pure imidazolium and pyrrolidinium ionic liquids (ILs) with [Tf₂N], [PF₆], [BF₄] and [fap] anions. The positive drift time spectra of the as-received samples measured at 220 °C exhibited close similarity; the peak at reduced mobility K₀ = 1.99 cm² V⁻¹ s⁻¹ was a dominant spectral pattern of imidazolium-based ILs. With an assumption that ILs vapor consists mainly of neutral ion pairs, which generate the parent cations in the reactant section of the detector, and using the reference data on the electrical mobility of ILs cations and clusters, this peak was attributed to the parent cation [emim]. Despite visible change in color of the majority of ILs after the heating at 220 °C for 5 h, essential distinctions between spectra of the as-received and heated samples were not observed. In negative mode, pronounced peaks were registered only for ILs with [fap] anion.     

Predicting Compensation Voltage for Singly-charged Ions in High-Field Asymmetric Waveform Ion Mobility Spectrometry (FAIMS)

Correlation between compensation voltage (CV) and the m/z ratio of singly-charged ions was elucidated. The experimental data for various alkylammonium homologues and various pharmaceutical compounds were used to construct empirical calibration curves that were fit using commercial regression analysis software packages. The best fit equations were applied to calculate the CV differences (??CV) in pure N₂ and N₂/He 50/50 carrier gasses and CV values for a variety of compounds using only m/z values. The calculated values were in good agreement with experimental data and ??CV values exhibited a very strong correlation with m/z. Application of these empirical calculations may provide a powerful CV prediction tool for researchers using high-field asymmetric waveform ion mobility spectrometry (FAIMS) and increase the value of FAIMS as an analytical method.     

Simultaneous chemiluminescence determination of promazine and fluphenazine using support vector regression

In this work, chemiluminescence (CL) behaviors of two selected phenothiazines, namely promazine and fluphenazine hydrochloride, were investigated for their simultaneous determination using oxidation of Ru(bipy)₃²⁺ by Ce⁴⁺ ions in acidic media. This method is based on the kinetic distinction of the CL reactions of fluphenazine and promazine with Ru(bipy)₃²⁺ and Ce⁴⁺ system in a sulfuric acid medium. Least square support vector regression models were constructed for relating concentrations of both compounds to their CL profiles. The parameters of the model consisting of σ² and γ were optimized using all possible combinations of σ² and γ to select the model with the minimum root mean square cross validation. Under optimized conditions, the univariate calibration curve was linear over the concentration ranges of 0.4-30.0 μg mL⁻¹ and 0.07-5.0 μg mL⁻¹ with detection limits of 0.1 μg mL⁻¹ and 0.04 μg mL⁻¹ for promazine and fluphenazine, respectively. The influence of potential interfering substances on the determination of promazine and fluphenazine were studied. The proposed method was used for simultaneous determination of both compounds in synthetic mixtures and in spiked human plasma.     

EPR spectroscopic studies in (30 − x) Li2O-xK2O-10CdO-59B2O3-1MnO2 multi-component glass system

EPR studies were carried out in (30 - x) Li₂O-xK₂O-10CdO-59B₂O₃-1MnO₂ multi-component glass system to understand the effect of the variation in the alkali ratios on the EPR parameters. The observed EPR spectra of Mn²⁺ ion exhibits resonances at g = 2.0, 3.3 and 4.3. The resonance at g = 2.0 is due to Mn²⁺ ions in an environment close to the octahedral symmetry, where as the resonances at g = 3.3 & 4.3 are due to the rhombic surroundings of Mn²⁺ ions. Hyperfine splitting constant values at g = 2.0 and number of paramagnetic centers & paramagnetic susceptibility at different observed resonances were evaluated. These parameters show non linear variation with progressive substitution of Li⁺ ion with K⁺ ions may be due to the changes in cation field strengths and local structural variation due to the variation in mixed alkali ion ratios.     

Affinity capillary electrophoretic study of K+/Na+ selectivity of hexaarylbenzene-based polyaromatic receptor

Affinity capillary electrophoretic (ACE) study has proved the selectivity of hexaarylbenzene-based polyaromatic receptor (R) for K⁺ ion over Na⁺ ion. The apparent binding constants of the R complexes with K⁺ and Na⁺ ions were determined from the dependence of effective electrophoretic mobility of R on the concentration of the above alkali metal ions in the background electrolyte using a non-linear regression analysis. The apparent binding constants (K_b) of the K-R⁺ and Na–R⁺ complexes in methanolic medium were evaluated as log K_b = 3.20 ± 0.22 for the K–R⁺ complex, and log K_b??0.7 for the Na–R⁺ complex.     

Qualitative analysis of trace constituents by ion mobility increment spectrometer

Ion mobility increment spectrometry (IMIS) is a high sensitive selective ionization technology for detection and identification of ultra-trace constituents, including toxic compounds, CW-agents, drugs and explosives in ambient air or liquid sample. Like an ion mobility spectrometry (IMS), this technology rests on sampling air containing a mixture of trace constituents, its ionization, spatial separation of produced ions and separated ions detection. Unlike IMS, ions of different types in IMIS are separated by ion mobility increment, α. Value α, is a function of the parameters: electric field strength and form, atmospheric pressure. To exclude the influence of these parameters on an α, the method of explosives identification by a standard compound was suggested. As a standard compound iodine was used. The relationship among the mobility coefficient increments equal to the relationship among the compensation voltage α_i/α_iodine=U_i/U_iodine is determined, where i are ions of 1,3-dinitrobenzene, 1,3,5-trinitrobenzene, p-mononitrotoluene, 2,4-dinitrotoluene and 2,4,6-trinitrotoluene This relationship is practically independent of the above mentioned parameters in the range 25<E/N<90 Td. The limits of the relative error of this relationship are determined both from spectra of individual compounds and nitrocompound-iodine mixtures.     

Prediction of the separation of phenols by capillary zone electrophoresis

The effect of pH and ionic strength on the migration of neutral acids in capillary zone electrophoresis (CZE) has been studied for several phenols. The mobilities of the phenols and the efficiency of the capillary have been related to the studied factors. The mobility can be related to the pH of the running buffer through the mobility of the phenolate ion, and the conditional acidity pK value of the phenol at the working ionic strength. This allows prediction of the migration of the phenol, solely from its pK_a^′ value (literature pK_a corrected for the ionic strength of the solution) and mobility of the anion, which can be easily calculated from the mobility at a basic pH value and the pK_a^′ value. Combination of the predicted mobility with the efficiency allows estimation of the resolution of the consecutive peaks obtained for a mixture of phenols. This method has been tested for two groups of phenols of environmental interest.