A simple and high sensitive spectrophotometric method for ultra trace determination of ruthenium with its catalytic effect on the oxidation of pyronin B by periodate

A new simple, selective, high sensitive and rapid method has been developed for spectrophotometric determination of ultra trace amounts of ruthenium based on its catalytic effect on the oxidation of pyronin B by periodate at lambdamax=555 nm. The described method is able to quantify ruthenium in the range of 0.1-100 ng ml-1 (r=0.9973), with a detection limit (S/N=3) of 0.036 ng ml-1. Under optimum conditions, this procedure has been successfully applied to determine the trace levels of ruthenium in the environmental and biological samples. The precision, expressed as relative standard deviation of three measurements, is better than 2.44%.     

偶氮胭脂红B动力学光度法测定Fe(III)

动力学光度法测定铁[1,2]多用2,4 二氯苯酚+4 氨基安替比林[3]、苄橙[4]、次甲基蓝[5]、酸性铬蓝Ｋ[6]和二溴对甲基偶氮羧[7]等为监测组分,以Ｈ2Ｏ2为氧化剂,α,α 联吡啶为活化剂。本文用催化光度法确定铁(ＩＩＩ)催化高碘酸钾氧化偶氮胭脂红Ｂ褪色反应的动力学条件及有关参数,仅以高碘酸钾为氧化剂,不使用活化剂,操作简单、快速,用于水样及生物样中铁的测定,结果满意。1　实验部分移取0 20ｍｌＦｅ(ＩＩＩ)标准工作溶液(1 0μｇ/ｍｌ)于25ｍｌ比色管中,依次加入2 0ｍｌ0 02ｍｏｌ/Ｌ硫酸溶液,1 5ｍｌ0 010ｍｏｌ/Ｌ高碘酸钾溶液,1 5ｍ…     

Kinetic-spectrophotometric determination of traces of vanadium(V) by its catalytic effect on the oxidation of 1,4-dihydroxyphthalimide dioxime with bromate

A kinetic-spectrophotometric method for the determination of trace amounts of vanadium(V) is described. It is based on the catalytic action of this ion on the oxidation of 1,4-dihydroxyphthalimide dioxime by bromate, which yields a red-violet product in acidic medium. The reaction is followed spectrophotometrically by measuring the rate of change in absorbance at 500 nm and 30°C. Using several kinetic methods (tangent, fixed-time and fixed-absorbance), vanadium(V) in the range 10–400 ng ml^?1 can be determined. The proposed methods are hardly subject to interferences. The tangent method was used for the determination of vanadium in atmospheric particulate matter, human serum and synthetic mixtures. The kinetic parameters of the catalysed and uncatalysed reactions are reported.     

A simple and selective spectrophotometric flow injection method for the determination of ultra trace amounts of phenylhydrazine by its inhibition effect on the reaction of victoria blue B and bromate in micellar medium

In this work, a simple, selective and rapid flow injection method has been developed for the determination of phenylhydrazine. The method is based on its inhibition effect on the reaction of victoria blue B and bromate in acidic micellar medium. The reaction was monitored spectrophotometrically by measuring victoria blue B absorbance at λ_max = 632 nm. The reagents and manifold variables, which have influences on the sensitivity, were investigated and the optimum conditions were established. The optimized conditions made it possible to determine phenylhydrazine in the ranges of 7–370 nM with a detection limit of 5 nM and a sample rate of 25 ± 5 samples/h. The proposed method has been successfully applied to the determination of phenylhydrazine in human serum and water samples.     

Kinetic spectrophotometric method for the determination of urinary cobalt based on its catalytic effect on the oxidation of -adrenaline hydrochloride by hydrogen peroxide

A catalytic for determination of nanomolar concentrations of Co(II), i.e., oxidation of -adrenaline hydrochloride with H₂O² in alkaline medium, is proposed. The reaction gives a low limit of detection of 2.5 × 10 ⁻⁹ M Co(II) in the reaction mixture, good reproducibility with a relative standard deviation (R.S.D.) of 4−5% in the Co(II) concentration range 8.0 × 10⁻⁹−8.0 × 10⁻⁸M and good selectivity. On the basis of this indicator reaction, a catalytic-spectrophotometric method for the determination of cobalt in small urine samples (5.00 ml) was elaborated. The analysis of 17 urine samples, taken from healthy persons of different ages, gave cobalt concentrations in the range 0.20–1.50 μmol 1⁻¹. The R.S.D. for ten replicate analyses of a urine sample with an average cobalt content of 0.63 μmol 1⁻¹ was 5.6%. The reliability of the method was verified by a comparative photometric method (r = 0.9755) and by a determination based on known additions of cobalt (r = 0.9894).     

Sequential injection spectrophotometric determination of trace amounts of iodide by its catalytic effect on the 4,4'-methylenebis(N,N-dimethylaniline)-chloramine-T reaction

A simple and sensitive sequential injection spectrophotometric procedure is proposed for the determination of trace amounts of iodide in pharmaceutical preparations. The method is based on the catalytic effect of iodide on the (tetra base) 4,4′-methylenebis(N,N-dimethylaniline)-chloramine-T reaction in acidic solution. The method involves a sequential aspiration of 255 μl sample/standard followed by 170 μl tetra base and then 128 μl chloramine-T solutions into a carrier stream to be stacked inside a holding coil and flow reversed through a reaction coil towards a detector. The resulting colored compound is measured at 600 nm using an UV/Vis-spectrophotometer. All the parameters that affect the reaction were evaluated and the calibration curve is linear over a range of 0.1–6.0 μg l⁻¹ of iodide concentration with detection limit of 0.05 μg l⁻¹. A sample throughput of 80 samples per hour and relative standard deviation of less than 2.0% was achieved. The method is successfully applied for the determination of iodide in three different samples (tablets).