Cellulose‐based graft copolymers with controlled architecture prepared in a homogeneous phase

Cellulose‐based macroinitiators with predetermined number of initiation sites were synthesized by acylation of microcrystalline cellulose AVICEL PH‐101 with 2‐bromoisobutyryl bromide under homogeneous reaction conditions in the N,N‐dimethylacetamide/LiCl solvent system. The influence of different methods of cellulose activation on acylation efficiency and reproducibility was investigated. Best results were obtained using thermal activation under reduced pressure or the newly introduced protocol based on solvent exchange to 1,4‐dioxane. Prepared macroinitiators were used for grafting with styrene and methyl methacrylate (MMA) using optimized atom transfer radical polymerization reaction conditions to achieve well‐controlled polymerizations with high initiation efficiency. For MMA grafting, the initiation efficiency was shown to be dependent on certain reaction conditions, such as type of solvent, monomer concentration, or the presence of a sacrificial initiator. In addition, single‐electron transfer living radical polymerization with Cu(0) as the catalyst was used for the first time to prepare cellulose‐graft‐polystyrene and cellulose‐graft‐poly(MMA) copolymers in a homogeneous phase. In summary, homogeneous reaction conditions, stoichiometric control in the preparation of macroinitiators, and controlled grafting jointly allowed for an extensive control of copolymers architecture, that is, density of grafting, composition, and molecular parameters of grafts. Moreover, some of the prepared copolymers were characterized by static and dynamic light scattering and microscopic techniques (transmission electron microscopy and atomic force microscopy). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of architecture on the tensile properties of triblock copolymers in a lamellar phase.

We have used self-consistent field theory to calculate the tensile moduli of triblock copolymers in lamellar microstructures prepared from linear and star architectures. The extensional moduli K(33) are the main contributors to the tensile moduli, and the contribution of K(U)33 (the internal energy contribution to K(33)) is the main component of the value of K(33). We find that the tensile moduli of ABC three-miktoarm star terpolymers are smaller than those of ABC linear triblock copolymers having identical components, presumably for two main reasons. First, for the ABC three-miktoarm star terpolymers, the contributions of K(U)33 are larger than those of the linear triblock copolymers; we attribute this phenomenon to the star terpolymers having smaller lamellar domain sizes at equilibrium relative to those of the linear triblock copolymers. Second, conformational entropies play an important role in affecting the tensile moduli, mainly because of the different degrees of freedom of the various chains. In contrast, the shear moduli contribute negligibly to the tensile moduli.     

Modeling molecular weight distribution of comb-branched graft copolymers

Grafting one type polymer onto a different polymer type may yield a comb-branched copolymer. The branching density has a significant effect on its overall molecular weight distribution. A general model is derived to describe the bivariate distribution of molecular weight and branching density for such comb copolymers. The model is applicable for various grafting mechanisms provided the side chains are randomly grafted onto the backbone. The determining parameters are the molecular weight distributions of backbone and side chains, and the branching density. Analytical expressions are obtained for the cases of the side chains having uniform and Schulz–Zimm distributions. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 705–714, 1998     

Biodegradable and stimuli sensitive amphiphilic graft copolymers and their sol–gel phase transition behavior

pH and temperature‐sensitive biodegradable poly(β‐aminoester)‐graft‐poly(ε‐caprolactone)‐block‐methoxy poly(ethylene glycol) (PBAE‐g‐PCL‐b‐mPEG) amphiphilic graft copolymers with different molecular weights were synthesized. The structure of these copolymers was adjusted by varying the feed ratios of ε‐caprolactone to methoxy poly(ethylene glycol)s (mPEG), amine and diacrylate monomer amounts and the molecular weight of mPEG. Aqueous solutions of these copolymers formed micelles at lower concentrations; however, the concentrated solutions showed a reversible sol–gel transition property depending on both pH and temperature changes under representative physiological conditions (pH 7.4, 37°C). The effects of the molecular weight of pH‐sensitive poly(β‐aminoester) block and mPEG group, the hydrophobic to hydrophilic block ratio (PCL/mPEG) and the concentration of the copolymer on the sol–gel transition were investigated. Proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography measurements were used to characterize the structure of the synthesized copolymers. The self‐assemble behavior and critical micelle concentration of the amphiphilic copolymers were estimated in phosphate buffer solution using fluorescence spectroscopy. The gelling behavior was measured by using tube inversion method. At pH 7.4, all copolymer solutions prepared 20 wt% concentration indicated sol–gel transition with increasing temperature. In vitro degradation experiments displayed that the synthesized graft copolymers mostly degraded hydrolytically within 20 days under physiological conditions. In order to investigate the potential application of synthesized hydrogels in drug delivery, Methylene Blue was used and approximately 70% of the loaded amount was released in 120 hr. The findings indicate that obtained graft copolymers can be used as injectable biodegradable carriers for pharmaceutical drugs. Copyright © 2015 John Wiley & Sons, Ltd.     

Surface behavior of amphiphilic heteroarm star-block copolymers with asymmetric architecture

We study the surface behavior of the asymmetric amphiphilic heteroarm poly(ethylene oxide) (PEO)/polystyrene (PS) star polymer on solid substrate. These star polymers differ in both architecture (four- and three-arm molecules, PEO-b-PS(3) and PEO-b-PS(2)) and in the length of PS chains (molecular weight from about 10 000 up to 24 000). We observed that, for a given chemical composition with a predominant content of hydrophobic blocks, the compression behavior of the PS domain structure controls the surface behavior and the final morphology of the monolayers. New features of the surface behavior of star-block copolymers are high stretching of the PS arms from the interface and enhanced stability of the circular PS domain structure, even at high compression. We suggest that for asymmetric star-block copolymers both architecture and chemical composition heavily favor the formation of highly curved interfaces and, thus, more stable circular domain structure with stretched PS arms.     

Hydrodynamic and molecular characteristics of graft copolymers of chitosan with acrylamide

The conformational properties of macromolecules of chitosan and its copolymers with acrylamide in a mixed solvent 0.33 M CH₃COOH + 0.3 M NaCl have been investigated by means of translation diffusion and viscometry. The copolymer macromolecules in a solvent suppressing polyelectrolyte effects possess a higher intracoil density (ρ_av = 0.010 g/cm³) than the chitosan macromolecules (ρ_av = 0.006 g/cm³), even though the hydrodynamic radius R _h of chitosan is smaller by a factor of ～1.5.     

Concentration fluctuation effects on the phase behavior of compressible diblock copolymers

A Hartree analysis has been performed for compressible diblock copolymers of incompatible pairs to investigate the concentration fluctuation effects on their microphase separation behavior. The free energy in the Hartree analysis is obtained from the self-consistent correction to its mean-field cousin, which was recently formulated for such copolymer systems. The mean-field phase diagram is shown to be significantly affected by the fluctuation effects as the copolymer chain size N is lowered. An effective interaction chi(cRPA), which carries not only the change in contact interactions but also the compressibility difference between block components, plays a key role in understanding of the phase behavior and the pressure responses of various thermodynamic transitions for the copolymers with finite sizes. In particular, a symmetric copolymer at disorder-to-lamella transition is found to satisfy Nchi(cRPA)(q*)=10.495+41.022N(-1/3) when evaluated at a characteristic wave number q* for ordered microphases.     

pH sensitive swelling and releasing behavior of nano-gels based on polyaspartamide graft copolymers

Dendritic and porous Ag-Pd alloy nanostructures were successfully fabricated on the surface of silicon substrate using the co-reduction method and galvanic replacement reaction, respectively. The molar compositions of Ag and Pd in the alloy could be modulated by controlling the molar ratios of metal precursors and reaction time. The Ag-Pd alloy nanostructures were characterized by transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD). The morphology and phase of Au-Pd alloy nanostructures were discussed as a function of molar ratios of metal precursors and reaction time. In addition, the morphology and composition-dependent surface-enhanced Raman scattering (SERS) of the as-synthesized Ag-Pd alloy nanostructures were investigated. The SERS enhancement factor was estimated and SERS mapping was performed to prove the homogeneity of these substrates. The results indicate that as-synthesized dendritic and porous Ag-Pd alloy nanostructures are good candidates for SERS spectroscopy.     

Effect of molecular architecture and size of mesogen on phase behavior and photoactive properties of photoactive liquid crystalline hyperbranched polyester epoxies containing benzylidene moiety

A series of photoactive liquid crystalline linear and hyperbranched polyester epoxies were synthesized by polyaddition of photoactive bis benzylidene alkanone diol monomers and terephthalic acid and trimesic acid respectively with good yield. The effect of molecular architecture (linear and hyperbranched), size of mesogenic unit (cyclic and acyclic units) on the physicochemical, thermal, mesogenic, and photoactive properties of hyperbranched polymers were studied and compared. Degree of branching of hyperbranched polymers was found to be in the range of 0.46–0.49. Monomers containing cyclic moieties only exhibited nematic mesophase, while all polymers exhibited typical nematic mesophase. Intermolecular photo cycloaddition reaction was studied by ultraviolet–visible spectra (UV–vis) and NMR spectroscopy and photo viscosity measurement of UV irradiated polymer solutions. Faster photo induced behavior of hyperbranched polymers containing acyclic alkanone moiety, as compared to polymers containing cycloalkanone moieties, was observed. The change in the refractive index was found to be in the range of 0.02–0.024. Substantial variation of refractive index indicates that this polymer could be used for optical recording. All the polymers were also found to be fluorescent in nature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 552–563, 2008     

Solution behavior of [(ethylene-co-vinyl alcohol)-g-ethylene oxide] graft copolymers

The solution behavior of hydrophobic-hydrophilic water-soluble graft copolymers consisting of poly[(ethylene-co-vinyl alcohol)-g-ethylene oxide] was investigated by high-resolution NMR spectroscopy and measurements of solution viscosity in tetrahydrofuran, water, and mixtures thereof at various temperatures. A graft copolymer with a backbone containing 2.7 mole% vinyl alcohol exists in an intramolecular phase-separated conformation in aqueous solution, independent of the temperature. Graft copolymers with backbones containing 20.3 mol% vinyl alcohol exhibit an intramolecular mixed-phase conformation in which the mobility of chains in the hydrophobic region depends on temperature. The temperature dependence of the intrinsic viscosity in water shows a maximum near 50°C.     

Fine structure and phase transition behavior of fluorinated comb copolymers

The fine structure in the solid state and phase transition behavior of newly synthesized comb copolymers having fluorocarbon and hydrocarbon side‐chains were investigated by temperature controlled wide angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). From the WAXD profiles, two kinds of short spacing peaks based on the formation of the subcell for fluorinated and hydrogenated side‐chains were confirmed at 5.0 and 4.1 Å, respectively. Furthermore, two kinds of endothermic peaks, which corresponded to melting peaks of both side‐chain crystals, appeared in heating process of the DSC thermograms. From these experimental findings, the phase separation structure having the independently packed immiscible side‐chain crystalline was formed in the whole polymer crystal. In addition, it was found that these comb polymers formed highly ordered (double) layer structure estimated using WAXD and small angle X‐ray scattering (SAXS). These fluorinated comb copolymers form a monolayer on the water surface and their transferred film with phase‐separated structure at nanometer size on solid. There were hydrogenated domains at 10–20 nm diameter scales in these phase separated surface structure of monolayers. From these experimental results, these copolymer monolayers are expected to be used as a new molecular device such as nanolithography based on the surface patterning of polymer nanomaterials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 416–425, 2006     

Synthesis and aggregation behavior of chitooligosaccharide‐based biodegradable graft copolymers

A series of novel “jellyfish‐like” graft copolymers with chitooligosaccharide (COS) as shorter backbone and poly(ε‐caprolactone) as longer branches were synthesized using ring‐opening polymerization of ε‐caprolactone via a protection‐polymerization‐deprotection procedure with trimethylsilylchitooligosaccharide as intermediate and triethylaluminum as catalyst precursor. The obtained chitooligosaccharide‐graft‐poly(ε‐caprolactone) polymers possess amphiphilic structure with hydrophilic COS backbone and hydrophobic polycaprolactone branches. Because of this unique “jellyfish‐like” structure, these graft copolymers could self‐assemble to form various morphologies of aggregates in a mixture solution of water and tetrahydrofuran. The transmission electron microscopy studies revealed that the formed aggregates exhibited necklace‐like, flower‐like onion vesicle, and tubular morphologies. It is found that the hydrogen‐bonding formed by the hydroxyl and amino groups remained on the COS backbone played an important role during the aggregation of these graft copolymers, and their morphologies were changed with the varying length of poly (ε‐caprolactone) branches, the concentration of the graft copolymer, and the self‐assembly process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4889–4904, 2008     

Polystyrene-nylon 6 graft copolymers

The synthesis of well-defined polystyrene-g-Nylon 6 copolymers is described. The materials were prepared for study of their rheological behaviour and to compare it with the recent findings for 2-phase block copolymer systems.The anionic polymerization of ?-caprolactam in the presence of polystyrene-ethyl acrylate copolymer was chosen as the preparative route. The reasons for the choice were (1) the fact that ester groups are known to be good initiators for the lactam polymerization and (2) that it has been previously established that uniform copolymers can be obtained from styrene and acrylate esters. The present paper describes initial results on preparation and characterization of graft copolymers.It was found that cross-linked materials resulted when the polystyrene copolymer contained more than 1 per cent by weight of ethyl acrylate. At lower ester concentrations, soluble and thermoplastic materials were obtained. The cross-linking reaction was tentatively identified as arising from the presence of the tertiary hydrogen alpha to the ester group. In agreement with this postulate, methacrylate copolymers produced soluble, thermoplastic grafts at concentrations as high as 5 weight per cent.The mechanical properties and the modulus-temperature behaviour of the 2-phase graft copolymer systems are also presented.     

Photochemical behavior of p-dimethylaminobenzoylated polystyrene as polymerization photoinitiator: Synthesis of graft copolymers

The photochemical behavior of p-dimethylaminobenzoylated polystyrene (PS-MI) in benzene solution has been investigated, both in the presence and absence of methyl methacrylate (MMA). This behavior has been compared with that of the model compound, 4-isopropyl-4′-N,N-dimethylaminobenzophenone (CU-MI). PS-MI photoreduction takes place only through excimer formation due to the high local chromophore concentration, and therefore, PS-MI disappearance quantum yield is close to the previously calculated limiting value (0.02) and independent of chromophore concentration. Several parameters that characterize the polymerization process have been determined; it has been found that the obtained PMMA is photografted onto PS-MI backbone. This is in agreement with the proposed mechanism for radical generation. No homo-PMMA formation has been detected. © 1993 John Wiley & Sons, Inc.     

Effect of ferrocene on the synthesis of graft copolymers of vinylpolysiloxane and styrene

Russian Journal of General Chemistry - The effect of ferrocene on the synthesis of graft poly(dimethylsiloxanes) by radical copolymerization of a polysiloxane containing terminal trivinylsiloxy...     

In-situ preparation of graft copolymers

Graft copolymers are closer to supermolecular structures than any other class of polymers. Most grafting reactions proceed in demixed blends or lead in situ to such blends The competition of chemical chain coupling and physical phase separation generates complex phase morphologies that cannot (or not so directly) be produced otherwise. To demonstrate potential and problems of graft copolymer systems, high-impact thermoplastics, block-graft copolymers and reactive blending are discussed.     

Chromatography of amphiphilic graft copolymers

Amphiphilic comb polymers were prepared through grafting poly(ethylene glycol) methyl ether (MPEG 2000) onto acrylic and methacrylic copolymers. The graft copolymers were purified from unreacted MPEG by partition chromatography on methanol pretreated fibrous cellulose using ethyl acetate and methanol as eluents. The separation was found to depend on the water contents of the cellulose and the eluents. It is proposed that one parameter of importance for the chromatographic separation is the formation of hydrated inverted micelles. The amphiphilic comb polymers were shown by gel chromatography on Sepharose to form high molecular weight aggregates in water. On addition of sodium lauryl sulphate or inorganic salts to the eluent at low ionic strengths these aggregates dissociated and were fractionated by the gel. It was also shown that on GPC in THF solution on Styragel columns the polymers exhibited apparent molecular weights equal or smaller than those of the corresponding backbones. This effect may be a consequence of the graft copolymers having relatively small hydrodynamic volumes, and this idea is supported by the fact that their intrinsic viscosities generally were lower than those of the backbones. However, adsorption on the Styragel columns also may be of importance.     

Comparative study of thermal degradation behavior of graft copolymers of polysaccharides and vinyl monomers

The thermal degradation of graft copolymers of both polysaccharides (guar gum and xanthan gum) showed gradual decrease in mass loss. Pure guar gum degraded about 95% but pure xanthan gum degraded about 76% up to 1173.15 K, while graft copolymers of guar gum and xanthan gum degraded only 65–76% up to 1173.15 K. Acrylic acid grafted guar gum and xanthan gum showing two-step degradation with formation of anhydride and ketonic linkage during heating, same pattern of degradation was found for xanthan gum-g-methacrylic acid. Guar gum-g-acrylamide degraded in single step and xanthan gum-g-acrylamide started to degrade above 448.15 K and it is a two-stage process and imparts thermal stability due to the formation of imide linkage with evolution NH₃. Guar gum-g-methacrylamide degraded in three steps due to the loss of NH₃ and CO₂ successively. 4-vinyl pyridine grafted both polysaccharides show single step degradation due to loss of pyridine pendent. N-vinyl formamide grafted guar gum and xanthan gum started to degrade at about 427.15 K, showed two-stage degradation process with the evolution of CO and NH₃ molecules while guar gum-g-(N-vinyl-2-pyrrolidone) degraded into two steps by the loss of pyrrolidone nucleus. Gum-g-2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) showed two-step degradation processes in two successive degradation steps, while xanthan gum-g-AMPS has started degradation at about 427.15 K and completed in five degradation steps. Overall, it was found that the grafted polysaccharides are thermally more stable than pure polysaccharides.     

Features of the phase behavior of block copolymers related to their polydispersity

To calculate cloud points of a melt of block copolymers, at which its microphase separation occurs, for the first time in the theory of polymers, a spectral method is used in a model that takes into account the compressibility of the melt and the polydispersity of its macromolecules. A particular case of this calculation for a copolymer whose macromolecules consist of two blocks is described, and the polydispersity of each of them is defined through the exponential Flory distribution.