The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Versatile ligand behavior of hydrotris(4-ethyl-3-methyl-5-thioxo-1,2,4-triazolyl)borate. Syntheses and crystal structures of Cu(I) and Bi(III) complexes

Preparations of copper(I) and bismuth(III) complexes of hydrotris(4-ethyl-3-methyl-5-thioxo-1,2,4-triazolyl)borate (Tr(Et,Me)) are described. These complexes have been characterized by means of spectroscopy and microanalysis. Molecular structures of [Cu(Tr(Et,Me))](2) x 2.5CH(3)CN x 0.5H(2)O (3a) and [Bi(Tr(Et,Me))(2)]NO(3) x 2CHCl(3) (4a) have been determined by single-crystal X-ray diffraction. In the centrosymmetric dimeric copper(I) complex, Tr(Et,Me) acts in the k(3)S,S',H:kS' ' coordination mode. The metal is found in a distorted trigonal geometry as the ligand exhibits an "S(3)-inverted" conformation at the boron center so that a weak [B-H.Cu] agostic interaction renders the overall coordination of the (3 + 1) type. On the other hand, in the bismuth complex, Tr(Et,Me) presents the k(3)S,S',S' ' coordination mode and the "S(3)-normal" conformation. The metal is found in a regular octahedral geometry bound by six thioxo groups of two ligands. Species distributions in solution have been studied using electrospray ionization mass spectrometry upon dissolution of 3a and 4a crystals in acetonitrile. Monomeric and polynuclear copper(I) complexes with different M:L ratios are present in solution, while for 4a only the monomeric species is present.     

Polynuclear and mixed-ligand mononuclear Cu(I) complexes with N-thiophosphorylated thioureas and 1,10-phenanthroline or PPh3

Deprotonation of the N-thiophosphorylated thioureas RC(S)NHP(S)(OiPr)(2) (R = Me(2)N, HL(I); iPrNH, HL(II); 2,6-Me(2)C(6)H(3)NH, HL(III), 2,4,6-Me(3)C(6)H(2)NH, HL(IV), aza-15-crown-5, HL(V)) and reaction with CuI or Cu(NO(3))(2) in aqueous EtOH leads to the polynuclear complexes [Cu(4)(L(I)-S,S')(4)], [Cu(8)(L(II)-S,S')(8)], and [Cu(3)(L(III-V)-S,S')(3)]. The structures of these compounds were investigated by IR, (1)H, (31)P{(1)H} NMR, UV-vis spectroscopy and elemental analyses. The crystal structures of [Cu(4)L(I)(4)], [Cu(8)L(II)(8)], [Cu(3)L(III,IV)(3)] were determined by single-crystal X-ray diffraction. Reaction of the deprotonated ligands (L(I-V))(-) with a mixture of CuI and 1,10-phenanthroline (phen) or PPh(3) leads to the mixed-ligand mononuclear complexes [Cu(phen)L(I-V)], [Cu(PPh(3))L(I-V)] or [Cu(PPh(3))(2)L(I-V)]. The same mixed-ligand complexes were obtained from the reaction of [Cu(4)L(I)(4)], [Cu(8)L(II)(8)], [Cu(3)L(III-V)(3)] with phen or PPh(3).     

New group 11 complexes with metal-selenium bonds of methyldiphenylphosphane selenide: a solid state, solution and theoretical investigation

Reactions between methyldiphenylphosphane selenide, SePPh(2)Me, and different group 11 metal starting materials {CuCl, [CuNO(3)(PPh(3))(2)], AgOTf, [AgOTf(PPh(3))] (OTf = OSO(2)CF(3)), [AuCl(tht)], [Au(C(6)F(5))(tht)] and [Au(C(6)F(5))(3)(tht)] (tht = tetrahydrothiophene)} were performed in order to obtain several new species with metal-selenium bonds. The new complexes [CuCl(SePPh(2)Me)] (1), [AgOTf(SePPh(2)Me)] (2), [AuCl(SePPh(2)Me)] (5), [Au(C(6)F(5))(SePPh(2)Me)] (6) and [Au(C(6)F(5))(3)(SePPh(2)Me)] (7) were isolated and structurally characterized in solution by multinuclear NMR spectroscopy ((1)H, (31)P, (77)Se and (19)F where appropriate). Solid products were isolated also from the reactions between SePPh(2)Me and [CuNO(3)(PPh(3))(2)] or [AgOTf(PPh(3))], respectively. NMR experiments, including low temperature (1)H and (31)P NMR, revealed for them a dynamic behaviour in solution, involving the transfer of selenium from PPh(2)Me to PPh(3). In case of the isolated silver(i) containing solid an equilibrium between, respectively, monomeric [AgOTf(PPh(3))(SePPh(2)Me)] (3) and [AgOTf(PPh(2)Me)(SePPh(3))] (4), and dimeric [Ag(PPh(3))(μ-SePPh(2)Me)](2)(OTf)(2) (3a) and [Ag(PPh(2)Me)(μ-SePPh(3))](2)(OTf)(2) (4a) species was observed in solution. In case of the isolated copper(i) containing solid the NMR studies brought no clear evidence for a similar behaviour, but it can not be excluded in a first stage of the reaction. However the transfer of selenium between the two triorganophosphanes takes place also in this case, but the NMR spectra suggest that the final reaction mixture contains the free triorganophospane selenides SePPh(2)Me and SePPh(3) as well as the complex species [CuNO(3)(PPh(3))(2)], [CuNO(3)(PPh(2)Me)(2)] and [CuNO(3)(PPh(3))(PPh(2)Me)] in equilibrium. Single-crystal X-ray diffraction studies revealed monomeric structures for the gold(I) 6 and gold(III) 7 complexes. In case of compound 6 weak aurophilic gold(I)···gold(I) contacts were also observed in the crystal. DFT calculations were performed in order to understand the solution behaviour of the silver(I) and copper(I) species containing both P(III) and P(V) ligands, to verify the stability of possible dimeric species and to account for the aurophilic interactions found for 6. In addition, the nature of the electronic transitions involved in the absorption/emission processes observed for 6 and 7 in the solid state were also investigated by means of TD-DFT calculations.     

Coordination chemistry of silanedithiolato ligands derived from cyclotrisilathiane: synthesis and structures of complexes of iron(II), cobalt(II), palladium(II), copper(I), and silver(I)

The coordination chemistry of chelating silanedithiolato ligands has been investigated on Fe(II), Co(II), Pd(II), Cu(I), and Ag(I). Treatment of M(OAc)(2) (M = Fe, Co, Pd) with cyclotrisilathiane (SSiMe(2))(3) in the presence of Lewis bases resulted in formation of Fe(S(2)SiMe(2))(PMDETA) (1), Fe(S(2)SiMe(2))(Me(3)TACN) (2), Co(S(2)SiMe(2))(PMDETA) (3), and Pd(S(2)SiMe(2))(PEt(3))(2) (4) (PMDETA = N,N,N',N',N' '-pentamethyldiethylenetriamine; Me(3)TACN = 1,4,7-trimethyl-1,4,7-triazacyclononane). The analogous reactions of M(OAc) (M = Cu, Ag) in the presence of PEt(3) gave rise to the dinuclear complexes M(2)[(SSiMe(2))(2)S](PEt(3))(3) [M = Cu (5), Ag (6)]. Complexes were characterized in solution by (1)H, (31)P[(1)H], and (29)Si[(1)H] NMR and in the solid state by single-crystal X-ray diffraction. Mononuclear complexes 1-3 have a four-membered MS(2)Si ring, and these five-coordinate complexes adopt trigonal-bipyramidal (for the PMDETA adducts) or square-pyramidal (for the Me(3)TACN adduct) geometries. In dimer 6, the (SSiMe(2))(2)S(2)(-) silanedithiolato ligand bridges two metal centers, one of which is three-coordinate and the other four-coordinate. The chelating effect of silanedithiolato ligands leads to an increase in the stability of silylated thiolato complexes.     

Synthesis and reactions of triphenylsilanethiolato complexes of manganese(II), iron(II), cobalt(II), and nickel(II)

Reactions of Fe[N(SiMe(3))(2)](2) with 1 and 2 equiv of Ph(3)SiSH in hexane afforded dinuclear silanethiolato complexes, [Fe(N(SiMe(3))(2))(mu-SSiPh(3))](2) (1) and [Fe(SSiPh(3))(mu-SSiPh(3))](2) (2), respectively. Various Lewis bases were readily added to 2, generating mononuclear adducts, Fe(SSiPh(3))(2)(L)(2) [L = CH(3)CN (3a), 4-(t)BuC(5)H(4)N (3b), PEt(3) (3c), (LL) = tmeda (3d)]. From the analogous reactions of M[N(SiMe(3))(2)](2) (M = Mn, Co) and [Ni(NPh(2))(2)](2) with Ph(3)SiSH in the presence of TMEDA, the corresponding silanethiolato complexes, M(SSiPh(3))(2)(tmeda) [M = Mn (4), Co (5), Ni (6)], were isolated. Treatment of 3a with (PPh(4))(2)[MoS(4)] or (NEt(4))(2)[FeCl(4)] resulted in formation of a linear trinuclear Fe-Mo-Fe cluster (PPh(4))(2)[MoS(4)(Fe(SSiPh(3))(2))(2)] (7) or a dinuclear complex (NEt(4))(2)[Fe(2)(SSiPh(3))(2)Cl(4)] (8). On the other hand, the reaction of 3a with [Cu(CH(3)CN)(4)](PF(6)) gave a cyclic tetranuclear copper cluster Cu(4)(SSiPh(3))(4) (9), where silanethiolato ligands were transferred from iron to copper. Silicon-sulfur bond cleavage was found to occur when the cobalt complex 5 was treated with (NBu(4))F in THF, and a cobalt-sulfido cluster Co(6)(mu(3)-S)(8)(PPh(3))(6) (10) was isolated upon addition of PPh(3) to the reaction system. The silanethiolato complexes reported here are expected to serve as convenient precursors for sulfido cluster synthesis.     

Structural variation in copper(I) complexes with pyridylmethylamide ligands: structural analysis with a new four-coordinate geometry index, tau4

Four Cu(I) complexes were synthesized with a family of pyridylmethylamide ligands, HL(R) [HL(R) = N-(2-pyridylmethyl)acetamide, R = null; 2,2-dimethyl-N-(2-pyridylmethyl)propionamide, R = Me(3); 2,2,2-triphenyl-N-(2-pyridylmethyl)acetamide, R = Ph(3))]. Complexes 1-3 were synthesized from the respective ligand and [Cu(CH(3)CN)(4)]PF(6) in a 2 : 1 molar ratio: [Cu(HL)(2)]PF(6) (1), [Cu(2)(HL(Me3))(4)](PF(6))(2) (2), [Cu(HL(Ph3))(2)]PF(6) (3). Complex 4, [Cu(HL)(CH(3)CN)(PPh(3))]PF(6), was synthesized from the reaction of HL with [Cu(CH(3)CN)(4)]PF(6) and PPh(3) in a 1 : 1 : 1 molar ratio. X-Ray crystal structures reveal that complexes 1, 3 and 4 are mononuclear Cu(I) species, while complex 2 is a Cu(I) dimer. The copper ions are four-coordinate with geometries ranging from distorted tetrahedral to seesaw in 1, 2, and 4. Complexes 1 and 2 are very air sensitive and they display similar electrochemical properties. The coordination geometry of complex 3 is nearly linear, two-coordinate. Complex 3 is exceptionally stable with respect to oxidation in the air, and its cyclic voltammetry shows no oxidation wave in the range of 0-1.5 V. The unusual inertness of complex 3 towards oxidation is attributed to the protection from bulky triphenyl substituent of the HL(Ph3) ligand. A new geometric parameter for four-coordinate compounds, tau(4), is proposed as an improved, simple metric for quantitatively evaluating the geometry of four-coordinate complexes and compounds.     

Cu(I) dinuclear complexes with tripodal ligands vs monodentate donors: triphenylphosphine, thiourea, and pyridine. A 1H NMR titration study

Complexes [PPh3Cu(Tr(Mes,Me))] (1), [PPh3Cu(Tr(Me,o-Py))] (2), and [PPh3Cu(Br(Mes)pz(o-Py))] (3) (Tr(Mes,Me) = hydrotris[1,4-dihydro-3-methyl-4-mesityl-5-thioxo-1,2,4-triazolyl]borate; Tr(Me,o-Py) = hydrotris[1,4-dihydro-4-methyl-3-(2-pyridyl)-5-thioxo-1,2,4-triazolyl]borate; Br(Mes)pz(o-Py) = hydro[bis(thioxotriazolyl)-3-(2-pyridyl)pyrazolyl]borate; PPh3 = triphenylphosphine) were synthesized by the reaction of dinuclear complexes [Cu(Tr(Mes,Me))]2, [Cu(Tr(Me,o-Py))]2, [Cu(Br(Mes)pz(o-Py))]2, and PPh3. 1-3 were characterized by 1H, 13C, and 31P NMR spectroscopy and ESI-mass spectrometry. Crystal structure analyses were performed for 1 and 2. Both complexes crystallize in the triclinic P space group with the metal in a slightly distorted tetrahedral geometry (S3P coordination) bound by a kappa3-S3 ligand and a PPh3 molecule. The solution molecular structures were investigated by means of variable-temperature (210-310 K, CDCl3, 1-2; 200-310 K, CD2Cl2, 3) and NOESY NMR spectroscopy. The solution structures of 1-2 are in accordance with the X-ray structures, and the complexes do not exhibit fluxional behavior. On the other hand, 3 is subject to an equilibrium between two species with a coalescing temperature of approximately 260 K. DFT geometry optimizations suggest that the major species of 3 consists of the Br(Mes)pz(o-Py) ligand bound to Cu(I) in the kappa3-S2H fashion with two C=S groups and a [Cu...H-B] interaction. A PPh3 completes the copper coordination (S2HP coordination). The complex [TuCu(Tr(Mes,Me))] (4) (Tu = thiourea) was crystallized using an excess of Tu with respect to [Cu(Tr(Me,2-Py))]2 (approximately a 6:1 ratio). The metal adopts a distorted tetrahedral geometry with an overall S3H coordination determined by the bound kappa3-S2H ligand (two C=S groups and a [B-H...Cu] interaction) and by a Tu. The reactivity of dinuclear complexes [Cu(Tr(Mes,Me))]2, [Cu(Tr(Me,o-Py))]2, and [Cu(Br(Mes)pz(o-Py))]2 with monodentate ligands was investigated by means of NMR titrations with PPh3, Tu. and pyridine (Py), and formation constants for the adducts [DCu(L)] (D = monodentate donor, L = tripodal ligand) were determined.     

A series of dinuclear homo- and heterometallic complexes with two or three bridging sulfido ligands derived from the tungsten tris(sulfido) complex [Et(4)N][(Me(2)Tp)WS(3)] (Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate)

The generation of heterobimetallic complexes with two or three bridging sulfido ligands from mononuclear tris(sulfido) complex of tungsten [Et(4)N][(Me(2)Tp)WS(3)] (1; Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate) and organometallic precursors is reported. Treatment of 1 with stoichiometric amounts of metal complexes such as [M(PPh(3))(4)] (M = Pt, Pd), [(PtMe(3))(4)(micro(3)-I)(4)], [M(cod)(PPh(3))(2)][PF(6)] (M = Ir, Rh; cod = 1,5-cyclooctadiene), [Rh(cod)(dppe)][PF(6)] (dppe = Ph(2)PCH(2)CH(2)PPh(2)), [CpIr(MeCN)(3)][PF(6)](2) (Cp = eta(5)-C(5)Me(5)), [CpRu(MeCN)(3)][PF(6)], and [M(CO)(3)(MeCN)(3)] (M = Mo, W) in MeCN or MeCN-THF at room temperature afforded either the doubly bridged complexes [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)M(PPh(3))] (M = Pt (3), Pd (4)), [(Me(2)Tp)W(=S)(micro-S)(2)M(cod)] (M = Ir, Rh (7)), [(Me(2)Tp)W(=S)(micro-S)(2)Rh(dppe)], [(Me(2)Tp)W(=S)(micro-S)(2)RuCp] (10), and [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)W(CO)(3)] (12) or the triply bridged complexes including [(Me(2)Tp)W(micro-S)(3)PtMe(3)] (5), [(Me(2)Tp)W(micro-S)(3)IrCp][PF(6)] (9), and [Et(4)N][(Me(2)Tp)W(micro-S)(3)Mo(CO)(3)] (11), depending on the nature of the incorporated metal fragment. The X-ray analyses have been undertaken to clarify the detailed structures of 3-5, 7, and 9-12.     

Complexes of N-thiophosphorylthioureas (HL) with copper(I). Crystal structures of [Cu3L3] and [Cu(PPh3)2L] chelates

Reaction of the potassium salts of N-thiophosphorylated thioureas of common formula RC(S)NHP(S)(OiPr)(2) [R = morpholin-N-yl (HL(a)), piperidin-N-yl (HL(b)), NH(2) (HL(c)), PhCH(2)NH (HL(d))] with Cu(PPh(3))(3)I in aqueous EtOH/CH(2)Cl(2) leads to mononuclear [Cu(PPh(3))(2)L-S,S'] complexes. Using copper(i) iodide instead of Cu(PPh(3))(3)I, polynuclear complexes [Cu(n)(L-S,S')(n)] were obtained. The structures of these compounds were investigated by ES-MS, elemental analyses, 1H and 31P NMR in solution, IR and 31P solid-state MAS NMR spectroscopy. The crystal structures of [Cu(3)L(3)(a)] and [Cu(PPh(3))(2)L(b)] were determined by single-crystal X-ray diffraction.     

Pyridazine based scorpionate ligand in a copper boratrane compound

Reaction of potassium tris(mercapto-tert-butylpyridazinyl)borate K[Tn(tBu)] with copper(II) chloride in dichloromethane at room temperature led to the diamagnetic copper boratrane compound [Cu{B(Pn(tBu))(3)}Cl] (Pn = pyridazine-3-thionyl) (1) under activation of the B-H bond and formation of a Cu-B dative bond. In contrast to this, stirring of the same ligand with copper(I) chloride in tetrahydrofuran (THF) gave the dimeric compound [Cu{Tn(tBu)}](2) (2) where one copper atom is coordinated by two sulfur atoms and one hydrogen atom of one ligand and one sulfur of the other ligand. Hereby, no activation of the B-H bond occurred but a 3-center-2-electron B-H···Cu bond is formed. The reaction of copper(II) chloride with K[Tn(tBu)] in water gave the same product 2, but a formal reduction of the metal center from Cu(II) to Cu(I) occurred. When adding tricyclohexyl phosphine to the reaction mixture of K[Tn(R)] (R = tBu, Me) and copper(I) chloride in MeOH, the distorted tetrahedral Cu complexes [Cu{Tn(R)}(PCy(3))] (R = tBu 3, Me 4) were formed. Compound 4 is exhibiting an "inverted" κ(3)-H,S,S, coordination mode. The copper boratrane 1 was further investigated by density functional theory (DFT) calculations for a better understanding of the M→B interaction involving the d(8) electron configuration of Cu.     

Copper(I) and nickel(II) complexes with 1:1 vs. 1:2 coordination of ferrocenyl hydrazone ligands: do the geometry and composition of complexes affect DNA binding/cleavage, protein binding, antioxidant and cytotoxic activities?

A new series of geometrically different complexes containing ferrocenyl hydrazone ligands were synthesised by reacting suitable precursor complex [MCl(2)(PPh(3))(2)] with the ligands HL(1) or HL(2) (where M = Cu(II) or Ni(II); HL(1) = [Cp(2)Fe(CH=N-NH-CO-C(6)H(5))] (1) and HL(2) = [Cp(2)Fe(CH=N-NH-CO-C(5)H(4)N)]) (2). The new complexes of the composition [Cu(L(1))(PPh(3))(2)], (3) [Cu(L(2))(PPh(3))(2)] (4), [Ni(L(1))(2)] (5) and [Ni(L(2))(2)] (6) were characterised by various spectral studies. Among them, complexes 3 and 5 characterised by single crystal X-ray diffraction showed a distorted tetrahedral structure for the former with 1:1 metal-ligand stoichiometry, but a distorted square planar geometry with 1:2 metal-ligand stoichiometry in the case of the latter. Systematic biological investigations like DNA binding, DNA cleavage, protein binding, free radical scavenging and cytotoxicity activities were carried out using all the synthesised compounds and the results obtained were explained on the basis of structure-activity relationships. The binding constant (K(b)) values of the synthesised compounds are found to be in the order of magnitude 10(3)-10(5) M(-1) and also they exhibit significant cleavage of supercoiled (SC) pUC19 DNA in the presence of H(2)O(2) as co-oxidant. The conformational changes of bovine serum albumin (BSA) upon binding with the above complexes were also studied. In addition, concentration dependent free radical scavenging potential of all the synthesised compounds (1-6) was also carried out under in vitro conditions. Assays on the cytotoxicity of the above complexes against HeLa and A431 tumor cells and NIH 3T3 normal cells were also carried out.     

New reagents for the synthesis of a series of ferrocenoyl functionalized copper and silver chalcogenolate complexes

A series of silylated ferrocenoyl chalcogenide reagents, FcC(O)ESiMe(3) (E = S, Se, Te; Fc = ferrocene), can be prepared in very good yield from FcC(O)Cl and LiESiMe(3). These reagents are used in the preparation of triphenylphosphine-ligated copper and silver ferrocenoyl thiolate and selenolate complexes, [M(4)(E{O}CFc)(4)(PPh(3))(4)], (M = Cu, Ag; E = S, Se) and [Cu(2)(mu-Se{O}CFc)(2)(PPh(3))(3)] from solubilized copper(i) and silver(i) acetate. The structures of these complexes have been determined via single-crystal X-ray diffraction. The driving force for these reactions is the thermodynamically favorable formation and elimination of AcOSiMe(3). The synthesis and characterization of both starting reagents and cluster complexes are discussed.     

The preparation and characterisation of hetero- and homobimetallic complexes containing bridging naphthalene-1,8-dithiolato ligands

Homo- and heterobimetallic complexes of the form [(PPh(3))(2)(mu(2)-1,8-S(2)-nap){ML(n)}] (in which (1,8-S(2)-nap)=naphtho-1,8-dithiolate and {ML(n)}={PtCl(2)} (1), {PtClMe} (2), {PtClPh} (3), {PtMe(2)} (4), {PtIMe(3)} (5) and {Mo(CO)(4)} (6)) were obtained by the addition of [PtCl(2)(NCPh)(2)], [PtClMe(cod)] (cod=1,5-cyclooctadiene), [PtClPh(cod)], [PtMe(2)(cod)], [{PtIMe(3)}(4)] and [Mo(CO)(4)(nbd)] (nbd=norbornadiene), respectively, to [Pt(PPh(3))(2)(1,8-S(2)-nap)]. Synthesis of cationic complexes was achieved by the addition of one or two equivalents of a halide abstractor, Ag[BF(4)] or Ag[ClO(4)], to [{Pt(mu-Cl)(mu-eta(2):eta(1)-C(3)H(5))}(4)], [{Pd(mu-Cl)(eta(3)-C(3)H(5))}(2)], [{IrCl(mu-Cl)(eta(5)-C(5)Me(5))}(2)] (in which C(5)Me(5)=Cp*=1,2,3,4,5-pentamethylcyclopentadienyl), [{RhCl(mu-Cl)(eta(5)-C(5)Me(5))}(2)], [PtCl(2)(PMe(2)Ph)(2)] and [{Rh(mu-Cl)(cod)}(2)] to give the appropriate coordinatively unsaturated species that, upon treatment with [(PPh(3))(2)Pt(1,8-S(2)-nap)], gave complexes of the form [(PPh(3))(2)(mu(2)-1,8-S(2)-nap){ML(n)}][X] (in which {ML(n)}[X]={Pt(eta(3)-C(3)H(5))}[ClO(4)] (7), {Pd(eta(3)-C(3)H(5))}[ClO(4)] (8), {IrCl(eta(5)-C(5)Me(5))}[ClO(4)] (9), {RhCl(eta(5)-C(5)Me(5))}[BF(4)] (10), {Pt(PMe(2)Ph)(2)}[ClO(4)](2) (11), {Rh(cod)}[ClO(4)] (12); the carbonyl complex {Rh(CO)(2)}[ClO(4)] (13) was formed by bubbling gaseous CO through a solution of 12. In all cases the naphtho-1,8-dithiolate ligand acts as a bridge between two metal centres to give a four-membered PtMS(2) ring (M=transition metal). All compounds were characterised spectroscopically. The X-ray structures of 5, 6, 7, 8, 10 and 12 reveal a binuclear PtMS(2) core with PtM distances ranging from 2.9630(8)-3.438(1) A for 8 and 5, respectively. The napS(2) mean plane is tilted with respect to the PtP(2)S(2) coordination plane, with dihedral angles in the range 49.7-76.1 degrees and the degree of tilting being related to the PtM distance and the coordination number of M. The sum of the Pt(1)coordination plane/napS(2) angle, a, and the Pt(1)coordination plane/M(2)coordination plane angle, b, a+b, is close to 120 degrees in nearly all cases. This suggests that electronic effects play a significant role in these binuclear systems.     

Platinum complexes of naphthalene-1,8-dichalcogen and related polyaromatic hydrocarbon ligands

Platinum bisphosphine complexes bearing dichalcogen-derivatised naphthalene, acenaphthene or phenanthrene ligands have been prepared by either oxidative addition to zero-valent platinum species or from [PtCl(2)(PPhR(2))] (R=Ph or Me) and the disodium or dilithium salts of the parent disulfur, diselenide or mixed S/Se species. The parent naphthalene, acenaphthene and phenanthrene chalcogen compounds were treated with either [Pt(PPh(3))(4)] or [Pt(C(2)H(4))(PMe(3))(2)] (prepared in situ from [PtCl(2)(PMe(3))(2)], ethene and sodium naphthalide or super hydride [LiBEt(3)H]) to give the appropriate platinum(II) species. The dilithium salts of 1,8-E(2)-naphthalene (E=S or Se) prepared in situ by reduction of the E-E bond with [LiBEt(3)H] were treated with [PtCl(2)(PPh(3))(2)] to give [Pt(1,8-E(2)-nap)(PPh(3))(2)]. The tetraoxides [Pt(1,8-(S(O)(2))(2)-nap)(PR(3))(2)] (PR(3)=PPh(3) or PMe(2)Ph) were prepared in a similar metathetical manner from the appropriate [PtCl(2)(PR(3))] complexes and the disodium salt of naphthalene 1,8-disulfinic acid (1,8-(S(O)ONa)(2)-nap). The X-ray structures of selected examples reveal bidentate coordination with the naphthalene-E(2) unit hinged (111-137 degrees) with respect to the coordination plane. The naphthalene ring suffers significant distortion from planarity.     

Unprecedented luminescent heteropolynuclear aggregates with gold thiolates as building blocks

The reaction of [AuCl(P-N)], in which P-N represents a heterofunctional phosphine ligand, with pentafluorothiophenol, HSC(6)F(5), gives the thiolate gold derivatives [Au(SC(6)F(5))(P-N)] (P-N = PPh(2)py (1), PPh(2)CH(2)CH(2)py (2), or PPhpy(2) (3)). Complex [Au(SC(6)F(5))(PPh(2)py)] (1) reacts with [Au(OTf)(PPh(2)py)] in a 1:1 or 1:2 molar ratio to afford the di- or trinuclear species [Au(2)(μ-SC(6)F(5))(PPh(2)py)(2)]OTf (4) and [Au(3)(μ(3)-SC(6)F(5))(PPh(2)py)(3)](OTf)(2) (5), with the thiolate acting as a doubly or triply bridging ligand. The reactivity of the mononuclear compounds [Au(SC(6)F(5))(P-N)] toward silver or copper salts in different ratios has been investigated. Thus, the treatment of [Au(SC(6)F(5))(P-N)] with Ag(OTf) or [Cu(NCMe)(4)]PF(6) in a 1:1 molar ratio gives complexes of stoichiometry [AuAg(OTf)(μ-SC(6)F(5))(P-N)] (P-N = PPh(2)py (6), PPh(2)CH(2)CH(2)py (7), or PPhpy(2) (8)) or [AuCu(μ-SC(6)F(5))(P-N)(NCMe)]PF(6) (P-N = PPh(2)py (9), PPh(2)CH(2)CH(2)py (10), or PPhpy(2) (11)). These complexes crystallize as dimers and display different coordination modes of the silver or copper center, depending on the present functionalized phosphine ligand. The treatment of [Au(SC(6)F(5))(PPh(2)py)] with silver and copper compounds in other molar ratios has been carried out. In a 2:1 ratio, the complexes [Au(2)M(μ-SC(6)F(5))(2)(μ-PPh(2)py)(2)]X (M = Ag, X = OTf (12); M = Cu, X = PF(6) (13)) are obtained. The same reaction in a 4:3 molar ratio affords the species [Au(4)M(2)(μ-SC(6)F(5))(3)(μ-PPh(2)py)(4)]X(3) (M = Ag, X = OTf (14); M = Cu, X = PF(6) (15)). The crystal structures of some of these complexes reveal different interactions among the metallic d(10) centers. The complexes display dual emission. The band at higher energy has been attributed to intraligand (IL) transitions, and the one at lower energy has been assigned to a ligand to metal (LM) charge transfer process. The latter emission is modulated by the heterometal (silver or copper).     

Unprecedented coordination of dithiocarbimate in multinuclear and heteroleptic complexes

An uncommon coordination protocol induced by the p-tolylsulfonyl dithiocarbimate ligand (L) [L = p-CH(3)C(6)H(4)SO(2)N[double bond, length as m-dash]CS(2)(2-)] in conjunction with PPh(3) allowed the formation of novel homodimetallic, Cu(2)(PPh(3))(4)L (1), trinuclear heterometallic Cu(2)Ni(L)(2)(PPh(3))(4) (2) and heteroleptic complexes of general formula cis-[M(PPh(3))(2)L] [M = Pd(ii) (3), Pt(ii) (4)]. The complexes have been characterized by microanalysis, mass spectrometry, IR, (1)H, (13)C and (31)P NMR and electronic absorption spectra and single-crystal X-ray crystallography. 2 uniquely consists of square planar, trigonal planar and tetrahedral coordination spheres within the same molecule. In both heteroleptic complexes 3 and 4 the orientation of aromatic protons of PPh(3) ligand towards the Pd(ii) and Pt(ii) center reveals C-HPd and C-HPt rare intramolecular anagostic or preagostic interactions. These complexes exhibit photoluminescent properties in solution at room temperature arising mainly from intraligand charge transfer (ILCT) transitions. The assignment of electronic absorption bands has been corroborated by time dependent density functional theory (TD-DFT) calculations. Complexes 1 and 2 with σ(rt) values ～ 10(-6) S cm(-1) show semi-conductor properties in the temperature range 313-403 K whereas 3 and 4 exhibit insulating behaviour.     

Neutral (bis-beta-diketonato) iron(III), cobalt(II), nickel(II), copper(II) and zinc(II) metallocycles: structural, electrochemical and solvent extraction studies

Neutral dimeric metallocyclic complexes of type [M(2)(L(1))(2)B(n)] (where M = cobalt(II), nickel(II) and zinc(II), L(1) is the doubly deprotonated form of a 1,3-aryl linked bis-beta-diketone ligand of type 1,3-bis(RC(O)CH(2)C(O))C(6)H(4) (R=Me, n-Pr, t-Bu) and B is pyridine (Py) or 4-ethylpyridine (EtPy)) have been synthesised, adding to similar complexes already reported for copper(II). New lipophilic ligand derivatives with R = octyl or nonyl were also prepared for use in solvent extraction experiments. Structural, electrochemical and solvent extraction investigations of selected metal complex systems from the above series are reported, with the X-ray structures of [Co(2)(L(1))(2)(Py)(4)] x 2.25CHCl(3) x 0.5H(2)O (R=Pr), [Co(2)(L(1))(2)(EtPy)(4)] (R=t-Bu), [Ni(2)(L(1))(2)(EtPy)(4)] (R=t-Bu), [Zn(2)(L(1))(2)(EtPy)(2)] (R=Me) and [Zn(2)(L(1))(2)(EtPy)(4)] (R=t-Bu) being presented. The electrochemistry of H(2)L(1) (R=t-Bu) and of [Fe(2)(L(1))(3)], [Co(2)(L(1))(2)(Py)(4)], [Ni(2)(L(1))(2)(Py)(4)], [Cu(2)(L(1))(2)] and [Zn(2)(L(1))(2)(Py)(2)] has been examined. Oxidative processes for the complexes are dominantly irreversible, but several examples of quasireversible behaviour were observed and support the assignment of an anodic process, seen between +1.0 and +1.6 V, as a metal-centred oxidation. The reduction processes for the respective metal complexes are not simple, and irreversible in most cases. Solvent extraction studies (water/chloroform) involving variable concentrations of metal, bis-beta-diketone and heterocyclic base have been performed for cobalt(II) and zinc(II) using a radiotracer technique to probe the stoichiometries of the extracted species in each case. Synergism was observed when 4-ethylpyridine was added to the bis-beta-diketone ligand in the chloroform phase. Competitive extraction studies show a clear uptake preference for copper(II) over cobalt(II), nickel(II), zinc(II) and cadmium(II).     

Coordination features of a hybrid scorpionate/phosphane ligand exemplified with Iridium

Although the pentacoordinated complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(cod)] (1; pz=pyrazolyl, cod=1,5-cyclooctadiene), isolated from the reaction of [{Ir(mu-Cl)(cod)}(2)] with [Li(tmen)][B(allyl)(CH(2)PPh(2))- (pz)(2)] (tmen=N,N,N',N'-tetramethylethane-1,2-diamine), shows behavior similar to that of the related hydridotris(pyrazolyl)borate complex, the carbonyl derivatives behave in a quite different way. On carbonylation of 1, the metal--metal-bonded complex [(Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}CO)(2)(mu-CO)] (2) that results has a single ketonic carbonyl bridge. This bridging carbonyl is labile such that upon treatment of 2 with PMe(3) the pentacoordinated Ir(I) complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PMe(3))] (3) was isolated. Complex 3 shows a unique fac coordination of the hybrid ligand with the allyl group eta(2)-bonded to the metal in the equatorial plane of a distorted trigonal bipyramid with one pyrazolate group remaining uncoordinated. This unusual feature can be rationalized on the basis of the electron-rich nature of the metal center. The related complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PPh(3))] (4) was found to exist in solution as a temperature-dependent equilibrium between the cis-pentacoordinated and trans square planar isomers with respect to the phosphorus donor atoms. Protonation of 3 with different acids is selective at the iridium center and gives the cationic hydrides [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PMe(3))]X (X=BF(4) (5), MeCO(2) (6), and Cl (7)). Complex 7 further reacts with HCl to generate the unexpected product [Ir(CO)Cl{(Hpz)B(CH(2)PPh(2))(pz)CH(2)CH(Me)}(PMe(3))]Cl (9; Hpz=protonated pyrazolyl group) formed by the insertion of the hydride into the Ir-(eta(2)-allyl) bond. In contrast, protonation of complex 4 with HCl stops at the hydrido complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PPh(3))]Cl (8). X-ray diffraction studies carried out on complexes 2, 3, and 9 show the versatility of the hybrid scorpionate ligand in its coordination.     

Synthesis, characterization, and structures of copper(II)-thiosulfate complexes incorporating tripodal tetraamine ligands

The reaction of [Cu(L)(H(2)O)](2+) with an excess of thiosulfate in aqueous solution produces a blue to green color change indicative of thiosulfate coordination to Cu(II) [L = tren, Bz(3)tren, Me(6)tren, and Me(3)tren; tren = tris(2-aminoethyl)amine, Bz(3)tren = tris(2-benzylaminoethyl)amine, Me(6)tren = tris(2,2-dimethylaminoethyl)amine, and Me(3)tren = tris(2-methylaminoethyl)amine]. In excess thiosulfate, only [Cu(Me(6)tren)(H(2)O)](2+) promotes the oxidation of thiosulfate to polythionates. Products suitable for single-crystal X-ray diffraction analyses were obtained for three thiosulfate complexes, namely, [Cu(tren)(S(2)O(3))].H(2)O, [Cu(Bz(3)tren)(S(2)O(3))].MeOH, and (H(3)Me(3)tren)[Cu(Me(3)tren)(S(2)O(3))](2)(ClO(4))(3). Isolation of [Cu(Me(6)tren)(S(2)O(3))] was prevented by its reactivity. In each complex, the copper(II) center is found in a trigonal bipyramidal (TBP) geometry consisting of four amine nitrogen atoms, with the bridgehead nitrogen in an axial position and an S-bound thiosulfate in the other axial site. Each structure exhibits H bonding (involving the amine ligand, thiosulfate, and solvent molecule, if present), forming either 2D sheets or 1D chains. The structure of [Cu(Me(3)tren)(MeCN)](ClO(4))(2) was also determined for comparison since no structures of mononuclear Cu(II)-Me(3)tren complexes have been reported. The thiosulfate binding constant was determined spectrophotometrically for each Cu(II)-amine complex. Three complexes yielded the highest values reported to date [K(f) = (1.82 +/- 0.09) x 10(3) M(-1) for tren, (4.30 +/- 0.21) x 10(4) M(-1) for Bz(3)tren, and (2.13 +/- 0.05) x 10(3) M(-1) for Me(3)tren], while for Me(6)tren, the binding constant was much smaller (40 +/- 10 M(-1)).