Efficient oxidation of alcohols to carbonyl compounds with molecular oxygen catalyzed by N-hydroxyphthalimide combined with a Co species

Highly efficient catalytic oxidation of alcohols with molecular oxygen by N-hydroxyphthalimide (NHPI) combined with a Co species was developed. The oxidation of 2-octanol in the presence of catalytic amounts of NHPI and Co(OAc)2 under atmospheric dioxygen in AcOEt at 70 degrees C gave 2-octanone in 93% yield. The oxidation was significantly enhanced by adding a small amount of benzoic acid to proceed smoothly even at room temperature. Primary alcohols were oxidized by NHPI in the absence of any metal catalyst to form the corresponding carboxylic acids in good yields. In the oxidation of terminal vic-diols such as 1,2-butanediol, carbon-carbon bond cleavage was induced to give one carbon less carboxylic acids such as propionic acid, while internal vic-diols were selectively oxidized to 1,2-diketones.     

Copper‐Catalyzed Reaction Cascade of Thiophenol Hydroxylation and S‐Arylation through Disulfide‐Directed C−H Activation

Copper‐catalyzed thiophenol C?H activation is described. Through an initial attempt to conduct C‐arylation with arylboronic acid, a rather surprising sequential C?H activation and S‐arylation was discovered. Mechanistic investigation revealed the disulfide intermediate as the key component in directing C?H oxidation. The overall reaction proceeded under mild conditions with molecular oxygen as the oxidant. Discovery of disulfide as the directing group provides a potential new direction for catalytic C?H functionalization under mild conditions.     

Selective oxidation of tetrahydrofuran with molecular oxygen catalyzed by polyalumazane–platinum complexes

Tetrahydrofuran (THF) was oxidized selectively with molecular oxygen catalyzed by magnesium oxide-based polyalumazane-supported platinum complexes under mild conditions. The selective oxidation of C–H bond α to the oxygen atom of ether and the oxidative path to ester other than ring cleavage to carboxylic acid were controlled by carrying out the reaction at 60°C with nitroethane as solvent. The platinum loading and the reaction time greatly affected the yield of γ-butyrolactone whereas the selectivity always remained at 100%. 76.92% γ-butyrolactone was obtained with 0.2811 mmol platinum loading per gram support within 12 hr. The single product of the THF oxidation was confirmed by ¹H-nuclear magnetic resonance. X-ray photoelectron spectroscopy data also confirmed the more recent report on the activation of the C–H bond by the null valent platinum from the viewpoint of supported platinum catalyst. The oxidation path was also suggested.     

Thermolysis of reactive oligo(p-phenylene sulfide) containing disulfide bond

Oligo(phenylene sulfide) (OPS) containing one disulfide bond at the end of the chain, which was obtained by the oxidative polymerization of diphenyl disulfide, had a relatively low Td_10%(temperature for 10% weight loss) of 412 °C because of degradation of the disulfide bond. But this thermal cleavage of the disulfide bond promoted the curing reaction through thiophenoxy radical formation. OPS was allowed to react with diiodobenzene at 220 °C. The thermal stability of OPS was improved through the consumption of the disulfide bond and the coupling of the chain.     

氯化血红素催化氧化巯基形成二硫键

对氯化血红素催化氧化巯基形成二硫键的反应进行了研究,发现N,N-二异丙基乙胺(DIEA)的加入可以提高氯化血红素的催化活性,并降低其在氧化过程中的自聚现象.在室温及少量DIEA存在下,将氯化血红素和巯基乙酸甲酯按摩尔比1∶4混合于p H=8.0的水溶液中,敞口搅拌反应20 min,可以催化空气氧化90%的巯基乙酸甲酯形成相应的分子间二硫键产物.该催化氧化体系还可应用于多肽合成中,在相同条件下,只需2 h即可完成还原型催产素和利那洛肽的氧化环合,生成高产率的催产素和利那洛肽环肽.与传统的氧化方法相比,氯化血红素催化氧化的方法具有高效、环保的优点,为多肽合成中二硫键的形成提供了一种新方法.     

Mechanism into selective oxidation of cinnamaldehyde using β-cyclodextrin polymer as phase-transfer catalyst

Selective oxidation of cinnamaldehyde to benzaldehyde in the presence of bicarbonate and hydrogen peroxide and catalyzed by β-cyclodextrin polymer (β-CDP) was investigated. β-CDP was utilized as the phase-transfer catalyst in this study. The immobilized β-cyclodextrin possessing a hydrophobic host cavity was found to be efficient as mass-transfer promoters for the oxidation of cinnamaldehyde. Benzaldehyde could be obtained in 63% yield under optimal reaction conditions. The results indicate the complex formed between cinnamaldehyde and β-CDP via the intermolecular weak interactions, e.g., hydrogen bond was the reason why the conversion and selectivity could be significantly promoted. Finally, the reusability of the catalyst was also evaluated. Its catalytic activity remained unchanged even after recycled for six times, which suggests it is an efficient catalyst for oxidation of cinnamaldehyde.     

Cleavage of S-S bond by nitric oxide (NO) in the presence of oxygen: a disproportionation reaction of two disulfides

Disulfide bond was cleaved by a catalytic amount of nitric oxide in the presence of oxygen, which was confirmed by experiments employing two symmetrical disulfides. The reaction resulted in the formation of unsymmetrical disulfides in nearly 50% yields. The steric hindrance of alkyl disulfide slowed the reaction rate, and an electron-donating group on the aryl disulfide promoted the reaction. The substituent and S-nitrosothiol effects suggested that the reaction was initialized with an oxidative process by NO+.     

Water-Promoted Carbon-Carbon Bond Cleavage Employing a Reusable Fe Single-Atom Catalyst

The development of methods for selective cleavage reactions of thermodynamically stable C−C/C=C bonds in a green manner is a challenging research field which is largely unexplored. Herein, we present a heterogeneous Fe−N−C catalyst with highly dispersed iron centers that allows for the oxidative C−C/C=C bond cleavage of amines, secondary alcohols, ketones, and olefins in the presence of air (O₂) and water (H₂O). Mechanistic studies reveal the presence of water to be essential for the performance of the Fe−N−C system, boosting the product yield from <1 % to >90 %. Combined spectroscopic characterizations and control experiments suggest the singlet ¹O₂ and hydroxide species generated from O₂ and H₂O, respectively, take selectively part in the C−C bond cleavage. The broad applicability (>40 examples) even for complex drugs as well as high activity, selectivity, and durability under comparably mild conditions highlight this unique catalytic system.     

The preparation and characterization of novel cocylic(arylene disulfide) oligomers

A series of homo‐ and cocyclic(arylene disulfide) oligomers were synthesized under high dilution conditions by the catalytic oxidation of arylenedithiols with oxygen in the presence of a copper‐amine catalyst in DMAc. The aryl groups contained moieties such as sulfone, ether, and ketone. The free radical ring‐opening polymerization of these cyclic(arylene disulfide) oligomers led to the formation of linear poly(thio arylene)s. The homo‐ and cocyclic(arylene disulfide) oligomers were characterized by gradient high pressure liquid chromatography (HPLC), get permeation chromatography (GPC), ¹H‐NMR, and differential scanning calorimetry (DSC) methods. These cocyclic(arylene disulfide) oligomers except those containing sulfone moiety had lower melt flow temperature as low as 140 °C and therefore could readily undergo free radical ring‐opening polymerization under mild conditions. The glass transition temperatures of these cocyclics ranged from 72.3 to 190.0 °C, while the glass transition temperatures of the polydisulfides derived from these cocyclics ranged from 78.4 to 194.5 °C. In this article, a new method of preparing arylene dithiols 4,4′‐oxybis(benzenethiol) and diphenylmethane‐4,4′‐dithiol is reported. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of macrocyclic aliphatic disulfide oligomers from dithiols by oxidative coupling with oxygen using a copper‐amine catalyst

A new effective method is provided for the synthesis of macrocyclic aliphatic disulfide oligomers by catalytic oxidation of aliphatic dithiols with oxygen in the presence of a copper‐amine catalyst. Copyright © 2004 John Wiley & Sons, Ltd.     

Terminal titanium-ligand multiple bonds. Cleavages of C=O and C=S double bonds with Ti imido complexes

Treatment of (t-)BuN=TiCl(2)Py(3) with 2 equiv lithium ketiminate compound, Li[OCMeCHCMeN(Ar)] (where Ar = 2,6-diisopropylphenyl), in toluene at room temperature gave (t-)BuN=Ti[OCMeCHCMeN(Ar)](2) (1) in high yield. The reaction of 1 with phenyl isocyanate at room-temperature resulted in imido ligand exchange producing PhN=Ti[OCMeCHCMeN(Ar)](2) (2). Compound 1 decomposed at 90 degrees C to form a terminal titanium oxo compound O=Ti[OCMeCHCMeN(Ar)](2) (3) and (t-)BuNHCMeCHCMeNAr (4). Also, the compound 3 could be obtained by reacting 1 with CO(2) under mild condition. Similarly, while 1 reacts with an excess of carbon disulfide, a novel terminal titanium sulfido compound S=Ti[OCMeCHCMeN(Ar)](2) (5) was formed via a C=S bond breaking reaction. A novel titanium isocyanate compound Ti[OCMeCHCMeN(Ar)](2)(NCO)(OEt) (6) was formed on heating 1 with 1 equiv of urethane, H(2)NCOOEt. Compounds 1-6 have been characterized by (1)H and (13)C NMR spectroscopies. The molecular structures of 1, 3, 5, and 6 were determined by single-crystal X-ray diffraction. A theoretical calculation predicted that the cleavage of the C-S double bonds for carbon disulfide with the Ti=N bond of compound 1 was estimated at ca. 21.8 kcal.mol(-1) exothermic.     

Rapid ruthenium-catalyzed synthesis of pyranopyrandiones by reconstructive carbonylation of cyclopropenones involving C[bond]C bond cleavage

Pyranopyrandiones were prepared by a novel ruthenium-catalyzed carbonylative dimerization of cyclopropenones via C-C bond cleavage. For example, treatment of dipropylcyclopropenone with a catalytic amount of Ru3(CO)12 and NEt3 in THF under 15 atm of carbon monoxide at 140 degrees C for 20 h gave a novel functional monomer, 3,4,7,8-tetrapropylpyrano[6,5-e]pyran-2,6-dione, in an isolated yield of 81%. Unsymmetrically substituted pyranopyrandiones were also obtained by ruthenium-catalyzed carbonylative coupling of cyclopropenones with alkynes under similar reaction conditions.     

Cuprous Oxide Catalyzed Oxidative CC Bond Cleavage for CN Bond Formation: Synthesis of Cyclic Imides from Ketones and Amines

Selective oxidative cleavage of a C? C bond offers a straightforward method to functionalize organic skeletons. Reported herein is the oxidative C? C bond cleavage of ketone for C? N bond formation over a cuprous oxide catalyst with molecular oxygen as the oxidant. A wide range of ketones and amines are converted into cyclic imides with moderate to excellent yields. In‐depth studies show that both α‐C? H and β‐C? H bonds adjacent to the carbonyl groups are indispensable for the C? C bond cleavage. DFT calculations indicate the reaction is initiated with the oxidation of the α‐C? H bond. Amines lower the activation energy of the C? C bond cleavage, and thus promote the reaction. New insight into the C? C bond cleavage mechanism is presented.     

New synthesis of polyaromatics through oxidative polymerization by using metal complexes with air

The oxidative polymerization provides a new synthetic route to polyaromatics. Poly(p-phenylene sulfide) (PPS) is produced by oxidative polymerization of thiophenol with a vanadyl complex catalyst. The metal complexes act as an efficient catalyst of oxygen oxidative polymerization. The polymerization to yield PPS is discussed especially focusing on the catalytic mechanism of the complexes.     

聚合物微球固载的催化剂TEMPO在分子氧氧化环己醇过程中的催化特性

醇氧化为羰基化合物是有机合成工业中最重要的化学转变之一,在实验室研究和精细化工生产中都占有非常重要的地位.使用传统的化学计量强氧化剂(如CrO3, KMnO4, MnO2等),不但成本高及反应条件苛刻,还会产生大量污染环境的废弃物.因此,需要大力发展高效、绿色化的醇转变为羰基化合物的氧化途径.以2,2,6,6-四甲基哌啶氮氧自由基(TEMPO)为催化剂,分子氧为氧化剂,可在温和条件下绿色化地实现醇的氧化转变.该催化氧化作用的实质是TEMPO经过单电子氧化过程转化为相应的氮羰基阳离子,该阳离子是一个具有强氧化性的氧化剂,可将伯醇和仲醇分别快速地、高转化率、高选择性地氧化为对应的醛或酮.然而,目前使用的TEMPO大多为均相催化剂,虽然表现出良好的催化活性和选择性,但反应后难以分离回收,不能再循环使用,严重制约着这一催化体系的发展.本文将TEMPO化学键合在聚合物载体上,在非均相催化剂的作用下,以期实现环已醇的分子氧氧化,将其转变为环已酮.首先采用悬浮聚合法,制备了交联聚甲基丙烯酸缩水甘油酯(CPGMA)微球,该聚合物微球表面含有大量环氧基团,为实现TEMPO的固载化提供了条件.以4-羟基-2,2,6,6-四甲基哌啶氮氧自由基(4-OH-TEMPO)为试剂,使CPGMA微球表面的环氧基团发生开环反应,从而将TEMPO键合于微球表面,制得了固载有TEMPO的聚合物微球TEMPO/CPGMA.将此非均相催化剂与Fe(NO3)3组成共催化体系,应用于分子氧氧化环己醇的催化氧化过程,深入考察了该共催化体系的催化性能,并探索研究了催化氧化机理,考察了主要条件对催化氧化反应的影响.结果表明,共催化体系TEMPO/CPGMA+Fe(NO3)3可以有效地催化分子氧氧化环己醇的氧化过程,将环己醇转化为唯一的产物环己酮,显示出良好的催化选择性.助催化剂Fe(NO3)3化学结构中的Fe3+离子和NO3–离子两种物种均参与催化过程,共同发挥助催化剂的作用,伴随着两种价态铁物种Fe(Ⅱ)与Fe(Ⅲ)的转变以及NO3–与NO2–之间的转变,固载化的氮氧自由基TEMPO不断地转变为氮羰基阳离子,该氧化剂物种使环己醇的氧化反应不断地循环进行.对于共催化体系TEMPO/CPGMA+Fe(NO3)3的使用,适宜的反应条件为TEMPO与Fe(NO3)3的摩尔比为1：1,55°C,通入常压O2.反应35 h,环己酮的转化率可达到44.1%.因此,在温和条件下,使用固载化的TEMPO,有效地实现了环己醇向环己酮的转化.此外,固载化催化剂TEMPO/CPGMA在循环使用过程中表现出良好的重复使用性能.     

Aerobic oxidation of organic compounds catalyzed by vanadium compounds

Aerobic oxidation of α-hydroxy ketones catalyzed by dichloroethoxyoxovanadium in ethanol causes a carbon–carbon bond cleavage that produces diesters or diketones. This reaction is highly chemoselective, and disecondary glycols do not react at all. However, ditertiary glycols effectively react with dichloroethoxyoxovanadium or trichlorooxovanadium to provide the corresponding ketones. Aerobic oxidation of α-hydroxy ketones catalyzed by dichloroethoxyoxovanadium or trichlorooxovanadium in aprotic solvents almost quantitatively affords the corresponding α-diketones. The reaction of tertiary cyclopropanol compounds with vanadyl acetylacetonate under an oxygen atmosphere causes fragmentation of the cyclopropane moiety to produce β-hydroxy ketones and β-diketones. For the 6-substituted bicyclo[4.1.0]heptanol derivatives, the endoperoxides are also obtained together with β-hydroxy ketones. Conversely, 2-ethoxycarbonylcyclopropyl silyl ethers produce γ-oxocarboxylate derivatives given the same reaction conditions. Monothioacetals are easily deprotected into carbonyls using a catalytic amount of trichlorooxovanadium in 2,2,2-trifluoroethanol under an oxygen atmosphere. Thiols are converted into the corresponding disulfides by the aerobic oxidation catalyzed by trichlorooxovanadium in the presence of molecular sieves 3A. Polymer-supported vanadium compounds are synthesized by the reaction of vanadium oxytrichloride with polymers bearing hydroxyl moieties. The catalyst prepared from TentaGel S OH was highly active and reusable for the aerobic oxidations.     

TEMPO/固载化席夫碱铜配合物共催化剂在分子氧氧化苯甲醇过程中的催化性能

通过大分子反应,将苯甲醛(BA)和邻氨基苯酚(AP)形成的双齿席夫碱配基键合在交联聚甲基丙烯酸缩水甘油酯(CPGMA)微球表面,形成固载有席夫碱配基的载体微球BAAP-CPGMA,再通过与铜盐的配位螯合反应,制备了固载有席夫碱铜配合物的微球[Cu(BAAP)2]-CPGMA.将该固载化铜配合物与均相的2,2,6,6-四甲基哌啶氮氧自由基(TEMPO)构成共催化体系TEMPO/[Cu(BAAP)2]-CPGMA,应用于分子氧氧化苯甲醇的催化氧化过程.我们考察了该共催化体系的催化性能,并探索研究了催化氧化机理.实验结果表明,共催化体系TEMPO/[Cu(BAAP)2]-CPGMA可在温和条件下(室温、常压的氧气)高效地将苯甲醇氧化为苯甲醛(选择性100%,苯甲醛产率93%),并具有良好的循环使用性能.     

Alkane Oxidation with Molecular Oxygen Using a New Efficient Catalytic System: N-Hydroxyphthalimide (NHPI) Combined with Co(acac)(n)() (n = 2 or 3)

A novel class of catalysts for alkane oxidation with molecular oxygen was examined. N-Hydroxyphthalimide (NHPI) combined with Co(acac)(n)() (n = 2 or 3) was found to be an efficient catalytic system for the aerobic oxidation of cycloalkanes and alkylbenzenes under mild conditions. Cycloalkanes were successfully oxidized with molecular oxygen in the presence of a catalytic amount of NHPI and Co(acac)(2) in acetic acid at 100 degrees C to give the corresponding cycloalkanones and dicarboxylic acids. Alkylbenzenes were also oxidized with dioxygen using this catalytic system. For example, toluene was converted into benzoic acid in excellent yield under these conditions. Ethyl- and butylbenzenes were selectively oxidized at their alpha-positions to form the corresponding ketones, acetophenone, and 1-phenyl-1-butanone, respectively, in good yields. A key intermediate in this oxidation is believed to be the phthalimide N-oxyl radical generated from NHPI and molecular oxygen using a Co(II) species. The isotope effect (k(H)/k(D)) in the oxidation of ethylbenzene and ethylbenzene-d(10) with dioxygen using NHPI/Co(acac)(2) was 3.8.     

Oxidation of 1,3-butadiene over Pd/C and Pd-Te/C catalysts in polar media

The oxidation of 1,3-butadiene over the Pd/C and Pd-Te/C heterogeneous catalysts occurs in organic solvents containing water at a temperature of 100°C and an oxygen partial pressure of $P_{\left[ {O_2 } \right]} = 4$ atm. Crotonaldehyde dominates among the three major products of oxidation over the Pd catalyst. The introduction of Te into the catalyst increases the methyl vinyl ketone yield, the furan yield being the lowest in all cases. X-ray photoelectron spectroscopy (XPS) showed that the active catalyst components can be in a partially oxidized state, particularly after storing the catalysts in air. Additional hydrogen treatment results in almost complete reduction of the active components to metals and enhances the catalytic activity. It is supposed that the oxidation of 1,3-butadiene over the Pd-Te catalysts proceeds via the activation of dioxygen over the Pd⁰ sites, with oxidized Pd and Te participating in subsequent chemical transformations.     

Catalytic Carbocation Generation Enabled by the Mesolytic Cleavage of Alkoxyamine Radical Cations

A new catalytic method is described to access carbocation intermediates via the mesolytic cleavage of alkoxyamine radical cations. In this process, electron transfer between an excited state oxidant and a TEMPO‐derived alkoxyamine substrate gives rise to a radical cation with a remarkably weak C?O bond. Spontaneous scission results in the formation of the stable nitroxyl radical TEMPO^. as well as a reactive carbocation intermediate that can be intercepted by a wide range of nucleophiles. Notably, this process occurs under neutral conditions and at comparatively mild potentials, enabling catalytic cation generation in the presence of both acid sensitive and easily oxidized nucleophilic partners.