共查询到20条相似文献,搜索用时 15 毫秒
1.
The structural properties of a polymer-containing ionic liquid under the conditions of good solubility of a flexible polymer
are studied theoretically. Two systems are discussed: In one, polymer solubility is due to the presence of specific interaction
between polymer chains and solvent cations; in the other, polymer solubility is due to the presence of specific interactions
between the polymer and solvent anions. The dependences of the structural characteristics of a solution on the polymer concentration
and the energy of attraction between polymer chains and solvent ions are calculated. In a semidilute polymer solution, long-range
correlations of polymer chains with a power dependence of the characteristic scale of ordering on the polymer density appear.
The conditions under which, along with the intermediate ordering typical of a pure ionic liquid, the long-range ordering of
the solvent cations and anions occur after addition of a polymer to the ionic liquid are studied. 相似文献
2.
梳型聚合物和活性聚合物是目前常用驱油聚合物,其增黏性和黏弹性是评价其驱油能力的重要指标.为考察剪切作用对两种聚合物溶液性能的影响,分别研究了梳型聚合物和活性聚合物溶液经过模拟炮眼剪切前后的宏观和微观性能变化.结果表明,在高速剪切、拉伸应力作用下,梳型聚合物黏度损失率为40.73%,活性聚合物黏度损失率为70.10%;当剪切频率为0.02 Hz时,梳型聚合物界面扩张弹性降低了19.03%,而活性聚合物界面扩张弹性降低了68.03%;相比活性聚合物,梳型聚合物紧密的空间网状结构虽被部分破坏,但仍有疏松的网络结构,且以聚集体的形式紧密地分散在溶液中,通过DLS及AFM测定表明其粒径尺寸稍有变小;可见梳型聚合物抗剪切能力较活性聚合物强. 相似文献
3.
C. E. Soteros 《Journal of mathematical chemistry》1993,14(1):91-102
As a step towards understanding the thermodynamics of multi-branched polymer systems, we look at a lattice model of a uniform branched polymer with fixed topology interacting with a surface and ask for the free energy of the polymer as the number of monomers which compose the polymer goes to infinity. The conformations of a uniform branched polymer with fixed topology are modelled by embeddings of a graph in the simple cubic lattice. Rigorous results about this model are reviewed. The results suggest that large branched polymers in three dimensions interacting with a plane have the same free energy as large linear polymers interacting with a plane; the same is not true, however, for the corresponding two-dimensional problem where the polymer interacts with a line. 相似文献
4.
The effect of polymer chain length and surface density on the adhesiveness of functionalized polymersomes 总被引:1,自引:0,他引:1
Lin JJ Silas JA Bermudez H Milam VT Bates FS Hammer DA 《Langmuir : the ACS journal of surfaces and colloids》2004,20(13):5493-5500
Giant cell-like polymer vesicles, polymersomes, made from the diblock copolymer poly(ethylene oxide)-polybutadiene (PEO-PBD), have bilayer structures similar to the cell membrane but have superior and tunable properties for storage and stability. We have modified the terminal hydroxyl of the hydrophilic block with biotin-lysine (biocytin), a biologically derived group that imparts specific adhesiveness to a polymer colloid coated with avidin. The functionalized polymer will form vesicles, either on its own or when mixed with unmodified block copolymers that also form vesicles. The incorporation and mixing of the functionalized polymer into vesicle bilayers is measured using a fluorescent version ofbiocytin with confocal microscopy. The fluorescence signal associated with the vesicle is in proportion with the concentration of functional polymer added during vesicle construction. The adhesiveness of polymer vesicles containing functionalized biotinylated polymer to avidin coated microspheres is measured with micropipet aspiration. Two types of polymer vesicles were constructed: one where the functionalized polymer (molecular weight (MW), 10400 Da) was longer than the surrounding unfunctionalized polymer (MW, 3600 Da) and one where the functionalized polymer (MW, 10400 Da) was the same length as the unfunctionalized polymer. In all cases, the avidin-biotin bonds form kinetically trapped crossbridges that impart little tension as they form but require significantly more tension to break. The relative length of the functionalized polymer on the surface of the vesicle is an important determinant for the adhesion of a polymer vesicle but not for the adsorption of soluble avidin. Greater adhesion strengths are seen where the functionalized polymer is longer than the surrounding polymer. The concentration of functionalized polymer at which adhesion is maximal depends on the relative lengths of the polymers. When the functionalized polymer is the same length as the surface brush of the polymersome membrane, the critical tension is maximal at 10 mol % functionalized polymer concentration. However, when the biocytin groups are attached to a polymer which is larger than the surface brush, the critical tension is maximal at 55 mol % functionalized polymer. These results indicate that polymer mixing and length can control the interfacial adhesion of polymer brushes and must be understood to tune polymersome adhesiveness. 相似文献
5.
R. B. Pandey B. L. Farmer 《Journal of polymer science. Part A, Polymer chemistry》2008,46(24):2696-2710
Exfoliation of a stack of sheets (a model for clay platelets) in a dynamic matrix of polymer chains is investigated by a computer simulation model. How the interplay between the thermodynamics (interaction-driven) and conformational (structural constraints) entropy affects the exfoliation of sheets is the subject of this study. A stack of four sheets with a small initial interlayer distance constitutes the layer on a discrete lattice. The layered platelets are immersed in a matrix represented by the mobile polymer chains which occupy a fraction (concentration) of the lattice sites. Both sheets and chains are modeled by the bond-fluctuation mechanism and execute their stochastic motion via Metropolis algorithm. An attractive and a repulsive interaction between the polymer matrix and platelets are considered. Exfoliation of the sheets is examined by varying the molecular weight of the polymer chains forming a dynamic network matrix with various degrees of entanglements. At low-molecular weight of the polymer, exfoliation is achieved with repulsive interaction and the exfoliation is suppressed with attractive matrix as sheets stick together via polymer mediated interaction introduced by intercalated polymer chains. Increasing the molecular weight of the polymer matrix suppresses the exfoliation of sheets primarily due to enhanced entanglement—at high-molecular weight (with the radius of gyration of polymer chains larger than the characteristic linear dimension of the platelets), the stacked (layered) morphology is arrested via entropic trapping and exfoliation ceases to occur. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2696–2710, 2008 相似文献
6.
A density functional theory based on the weighted density has been developed to investigate the depletion interactions between two colloids immersed in a bath of the binary polymer mixtures, where the colloids are modeled as hard spheres and the polymers as freely jointed tangent hard-sphere chain mixtures. The theoretical calculations for the depletion forces between two colloids induced by the polymer are in good agreement with the computer simulations. The effects of polymer packing fraction, degree of polymerization, polymer/polymer size ratio, colloid/polymer size ratio on the depletion interactions, and colloid-colloid second virial coefficient B2 due to polymer-mediated interactions have been studied. With increasing the polymer packing fraction, the depletion interaction becomes more long ranged and the attractive interaction near the colloid becomes deeper. The effect of degree polymerization shows that the long chain gives a more stable dispersion for colloids rather than the short chain. The strong effective colloid-colloid attraction appears for the large colloid/polymer and polymer/polymer size ratio. The location of maximum repulsion Rmax is found to appear Rmax approximately sigmac+Rg2 for the low polymer packing fraction and this is shifted to smaller separation Rmax approximately sigmac+sigmap2 with increasing the polymer packing fraction, where sigmap2 and Rg2 are the small-particle diameter and the radius of gyration of the polymer with the small-particle diameter, respectively. 相似文献
7.
随着纳米科技在高分子领域的不断升温,高分子单链凝聚态的研究引起了人们的广泛重视。高分子单链以纳米尺度的微粒孤立存在,不存在分子链之间的几何缠结。本文综述了近年来国内外高分子单链的研究进展。首先介绍了高分子单链的主要制备方法如喷雾法、冷冻干燥法、微乳液聚合法、反向沉淀法以及表面扩展膜法,接着详细介绍了高分子单链的表征技术及高分子链构象的计算机模拟技术,最后介绍了高分子单链及单分子胶束在制备金属纳米粒子领域的应用,并展望了高分子单链的研究领域和方向。 相似文献
8.
The structural and thermodynamic properties of tethered polymer layers formed by spreading diblock copolymers at a solid surface or at a fluid‐fluid interface are studied using a molecular mean‐field theory. The role of the anchoring block in determining the properties of the tethered polymer layer is studied in detail. It is found that both the anchoring and the tethered blocks are very important in determining the phase behavior of the polymer layer. The structures of the coexisting phases, the phase boundaries and the stability of the layer are found to depend on the ratio of molecular weight between the two blocks, the polymer‐interface (surface) interactions and the strength of the interactions between the two blocks. The different phase transitions found are related to experimental observations. The properties of the polymer layers at coexistence reflect the block that is the dominant driving force for phase separation. The ability of the tethered polymer layers, under different conditions, to control protein adsorption to surfaces is also studied. It is found that the most important factors determining the ability of a polymer layer to reduce the equilibrium amount of proteins adsorbed to a surface are the surface coverage of polymer and the surface‐polymer interactions. The polymer chain length plays only a secondary role. For the kinetic control, however, it is found that the potential of mean‐force, and thus the early stages of adsorption, depends strongly on polymer molecular weight. Further, it is found that the molecular factors determining the ability of the tethered polymer layer to reduce the equilibrium amount of protein adsorption are different than those that control the kinetic behavior. Comparisons with experimental observations are presented. The predictions of the theory are in very good agreement with the measured adsorption isotherms. Guidelines for building optimal surface protection for protein adsorption, both kinetic and thermodynamic, are discussed. 相似文献
9.
Müller JG Atas E Tan C Schanze KS Kleiman VD 《Journal of the American Chemical Society》2006,128(12):4007-4016
The dynamics of fluorescence quenching of a conjugated polyelectrolyte by a cyanine dye are investigated by femtosecond fluorescence up-conversion and polarization resolved transient absorption. The data are analyzed with a model based on the random walk of the exciton within the polymer chain and a long-range direct energy transfer between polymer and dye. We find that rapid intrachain energy migration toward complex sites with the dye leads to the highly efficient energy transfer, whereas the contribution from direct, long-range energy transfer is negligible. We determine the actual density of complexes with the dye along the polymer chain. A clear deviation from calculations based on a constant complex association constant is found and explained by a reduced effective polymer concentration due to aggregation. Altogether, the quenching efficiency is found to be limited by (i) the energetic disorder within the polymer chain and (ii) the formation of loose polymer aggregates. 相似文献
10.
Abstract Basic questions concerning heterocyclic polymers are reviewed. Initial investigations on the heterocyclic polymer BBB prepared from napthalene-1,4,5,8 tetracarboxylic acid and 3,3′-diaminobenzidine are described. These include infrared absorption studies of the structure of the polymer, fractionation of the polymer by exclusion chromatography on a porous substrate, and light scattering and dilute solution viscometry on fractions of the polymer dissolved in a strong acid. These data are interpreted to conclude that: (1) in dilute solutions BBB behaves as a “flexible coil” macromolecule, with perhaps relatively free rotation about the single bond connecting the long, inflexible, nearly planar repeat units; (2) a sufficient amount of interchain complex formation occurs in the solid state to give the linear, noncrystalline polymer some of the physical properties of a highly cross-linked network polymer. 相似文献
11.
《Polymer Degradation and Stability》1987,19(4):323-341
The oxidative degradation reactions of polyacetylene, prepared from a soluble precursor polymer, are described and compared with those of more common polymers and of polyacetylene prepared by the conventional method. Because the band structure of the π-electron system of the polymer allows the formation of charge-transfer complexes with oxygen, the initial process in the pristine polymer is oxygen doping, with increasing conductivity. This is followed by irreversible degradation which is much faster than that of polyolefins or polydienes and faster than that of the crystalline polymer. Doping to low levels with electron acceptors removes the electrons involved in oxygen doping and the polymer becomes much more stable in air. Doping to high levels leads to new instabilities as the polymer reacts slowly with its counter-ions. Studies of polypyrrole and polythiophene show that these polymers are much more stable than polyacetylene but still undergo degradation reactions. The general features of their degradation mechanisms are discussed. 相似文献
12.
单分散大粒径聚合物微球的合成及应用 总被引:23,自引:0,他引:23
单分散,大粒径聚合物微球是近20年来开发的一类球形高分子粒子,在标准计量、情报信息、化学化工、医学免疫及生物化学等许多领域里有着广阔的应用前景,其合成和应用在高分子科学领域里已成为人们致力于研究和开发的热门课题。 相似文献
13.
Parashchuk OD Laptinskaya TV Paraschuk DY 《Physical chemistry chemical physics : PCCP》2011,13(9):3775-3781
Donor-acceptor blends based on conjugated polymers are the heart of state-of-the-art polymer solar cells, and the control of the blend morphology is crucial for their efficiency. As the film morphology can inherit the polymer conformational state from solution, the approaches for probing and controlling the polymer conformational state in the blends are of high importance. In this study, we show that the macromolecular dynamics in solutions of the archetypical conjugated polymer, MEH-PPV, is essentially changed upon addition of an acceptor 2,4,7-trinitrofluorenone (TNF) by using dynamic light scattering (DLS). We have observed four new types of the macromolecular dynamics absent in the parent polymer determined by the polymer and acceptor content. The MEH-PPV?:?TNF ground-state charge-transfer complex (CTC) is suggested to result in these dynamics. In the dilute polymer solution, the CTC formation leads to slower dynamics as compared with the pristine polymer. This is evidence of aggregates formed by intercoil links that are the CTCs involving two conjugated segments of different coils with acceptor molecules being sandwiched between them. At low acceptor content, the aggregates are not stable but at high acceptor content, they are. In the semidilute solution at low acceptor content, the dynamics becomes faster as compared with the pristine polymer that is explained by confinement of the coupled motions of entangled polymer chains. At high acceptor content, the dynamics is far much slower with a characteristic long-range correlation at the scale 3-5 μm that is explained by aggregation of polymer chains in clusters. One can expect that the DLS technique could become a useful tool to study the nano- and microstructure of donor-acceptor conjugated polymer blends to achieve controllable morphology in the corresponding blend films. 相似文献
14.
A prototype of novel low thermal expansion materials using mesoporous silica particles is demonstrated. Mesoporous silica/polymer composites with densely filled polymer inside the mesopore space are fabricated by mechanically mixing both organically modified mesoporous silica and epoxy polymer. The mesopores are easily penetrated by polymers as a result of the capillary force during the mechanical composite processing. Furthermore, we propose a new model of polymer mobility restriction using mesoporous silica with a large pore space. The robust inorganic frameworks covering the polymer effectively restrict the polymer mobility against thermal energy. As a result, the degree of total thermal expansion of the composites is drastically decreased. From the mass‐normalized thermal mechanical analysis (TMA) charts of various composites with different amounts of mesoporous silica particles, it is observed that the coefficient of thermal expansion (CTE) values gradually increase with an increase of the polymer amount outside the mesopores. It is proven that the CTE values in the range over the glass‐transition temperatures (Tg) are perfectly proportional to the outside polymer amounts. Importantly, the Y‐intercept of the relation equation obtained by a least‐square method is the CTE value and is almost zero. This means that thermal expansion does not occur if no polymers are outside the mesopores. Through such a quantative discussion, we clarify that only the outside polymer affects the thermal expansion of the composites, that is, the embedded polymers inside the mesopores do not expand at all during the thermal treatment. 相似文献
15.
In all-polymer solar cells (APSCs),number-average molecular weights (Mns) of polymer donors and polymer acceptors play an important role in active layer morphology and photovoltaic performance.In this work,based on a series of APSCs with power conversion efficiency of approaching 10%,we study the effect of Mns of both polymer donor and polymer acceptor on active layer morphology and photovoltaic performance of APSCs.We select poly[4-(5-(4,8-bis(5-((2-butyloctyl)thio)thiophen-2-yl)-6-methylbenzo[1,2-b:4,5-b']dithiophen-2-yl)thiophen-2-yl)-5,6-difluoro-2-(2-hexyldecyl)-7-(5-methylthiophen-2-yl)-2H-benzo[d][1,2,3]triazole](CD1) as the polymer donor and poly[4-(5-(5,10-bis(2-dodecylhexadecyl)-4,4,g,9-tetrafluuoro-7-methyl-4,5,9,10-tetrahydro3a,5,8,10-tetraaza-4,g-diborapyren-2-yl)thiophen-2-yl)-7-(5-methylthiophen-2-yl)benzo[c][1,2,5]thiadiazole](PBN-14) as the polymer acceptor.The Mns of polymer donor CD1 are 14.0,35.5 and 56.1 kg/mol,respectively,and the Mns of polymer acceptor PBN-14 are 32.7,72.4 and 103.4 kg/mol,respectively.To get the desired biscontinueous fibrous network morphololgy of the polymer donor/polymer acceptor blends,at least one polymer should have high or medium Mn.Moreover,when the Mn of polymer acceptor is high,the active layer morphology and APSC device performance are insensitive to the Mn of polymer donor.The optimal APSC device performance is obtained when the Mn of both the polymer donor and the polymer acceptor are medium.These results provide a comprehensive and deep understanding on the interplay and the effect of Mn of polymer donors and polymer acceptors in high-performance APSCs. 相似文献
16.
Off-lattice Monte Carlo simulations in the canonical ensemble are used to study polymer-particle interactions in nanocomposite materials. Specifically, nanoscale interactions between long polymer chains (N=550) and strongly adsorbing colloidal particles of comparable size to the polymer coils are quantified and their influence on nanocomposite structure and dynamics investigated. In this work, polymer-particle interactions are computed from the integrated force-distance curve on a pair of particles approaching each other in an isotropic polymer medium. Two distinct contributions to the polymer-particle interaction potential are identified: a damped oscillatory component that is due to chain density fluctuations and a steric repulsive component that arises from polymer confinement between the surfaces of approaching particles. Significantly, in systems where particles are in a dense polymer melt, the latter effect is found to be much stronger than the attractive polymer bridging effect. The polymer-particle interaction potential and the van der Waals potential between particles determine the equilibrium particle structure. Under thermodynamic equilibrium, particle aggregation is observed and there exists a fully developed polymer-particle network at a particle volume fraction of 11.3%. Near-surface polymer chain configurations deduced from our simulations are in good agreement with results from previous simulation studies. 相似文献
17.
R. D. Lundberg R. R. Phillips D. G. Peiffer 《Journal of Polymer Science.Polymer Physics》1989,27(2):245-260
The interaction of metal sulfonate ionomers with polymers containing low levels of amines has been investigated in solution. For example, zinc sulfo EPDM and a styrene/vinyl pyridine copolymer form such complexes over broad concentration ranges. The resultant solutions offer enhanced viscosities at dilute polymer concentrations. At high polymer levels solutions based on these complexes are lower in viscosity than the ionomer alone. These interpolymer complexes have been shown to exhibit an improved property/rheology balance in bulk systems. In solution, polymer complexes provide control of hydrocarbon solution viscosity not available with conventional polymers. Reduced viscosity-concentration studies suggest that these polymer complexes are a result of the amine-containing polymer interacting with intramolecular-associated ionomer coils, which at higher concentrations form a pseudonetwork. 相似文献
18.
Da Hae Son Gi Young Kim Ji-Eun Jeong Sang-Ho Lee Young Il Park Hoyoul Kong In Woo Cheong Jin Chul Kim 《Molecules (Basel, Switzerland)》2021,26(9)
We conducted a detailed investigation of the influence of the material properties of dynamic polymer network coatings on their self-healing and damage-reporting performance. A series of reversible polyacrylate urethane networks containing the damage-reporting diarylbibenzofuranone unit were synthesized, and their material properties (e.g., indentation modulus, hardness modulus, and glass-transition temperature) were measured conducting nanoindentation and differential scanning calorimetry experiments. The damage-reporting and self-healing performances of the dynamic polymer network coatings exhibited opposite tendencies with respect to the material properties of the polymer network coatings. Soft polymer network coatings with low glass-transition temperature (~10 °C) and indentation hardness (20 MPa) exhibited better self-healing performance (almost 100%) but two times worse damage-reporting properties than hard polymer network coatings with high glass-transition temperature (35~50 °C) and indentation hardness (150~200 MPa). These features of the dynamic polymer network coatings are unique; they are not observed in elastomers, films, and hydrogels, whereby the polymer networks are bound to the substrate surface. Evidence indicates that controlling the polymer’s physical properties is a key factor in designing high-performance self-healing and damage-reporting polymer coatings based on mechanophores. 相似文献
19.
The effect on rheological properties on mixing one gel-forming and one nongelling polymer is investigated. It is found that on addition of a nongelling polymer to a constant amount of gel-forming polymer, the shear modulus of the resulting gel can either decrease or increase depending on the polymers. The results are interpreted within a simple qualitative model based on polymer incompatibility in combination with percolation theory and a uniform stress approximation. 相似文献
20.
Martinelli A Matic A Jacobsson P Börjesson L Fernicola A Panero S Scrosati B Ohno H 《The journal of physical chemistry. B》2007,111(43):12462-12467
We have investigated the physical properties of proton conducting polymer membranes based on a protic ionic liquid (IL). Properties such as ionic conductivity, melting point of the polymer phase, and glass transition temperature of the liquid phase are studied as a function of IL/polymer ratio and temperature. We observe an increased thermomechanical stability of the membrane with increasing polymer content. However, there is a concomitant decrease in the conductivity with increasing polymer content. This decrease is larger than what can be expected from the dilution of the conducting IL by the insulating polymer matrix. The origin of this decrease can be caused both by the morphology of the membrane and by interactions between the polymer matrix and the ionic liquid. We find a change in the glass transition temperature and in the temperature dependence of the conductivity with increasing polymer content. Both effects can be related to the physical confinement of the IL in the polymer membrane. 相似文献