Synthesis,spectroscopic and thermal characterization of new metal-containing isocyanate-based polymers

Journal of Thermal Analysis and Calorimetry - To overcome the polyurethanes low heat resistance and obtain new PU-based materials, in continuation of our research in the synthesis of hybrid...     

Synthesis and reactivity of metal-containing monomers

The polymerization of diacrylates of the nontransition metals Mg, Zn, Ba, and Pb, which proceeds at low temperatures (5–10°C) with the complexes of alkylcobalts with tridentate Shiff bases (RCo) as initiators, was studied. The radical mechanism of the process was proved with the aid of free radical scavengers. The polymerization kinetics is given by the equationW _n = k [M] · [RCo]^0.75. The influence of the nature of the metal in the monomer and the alkyl ligand in the initiator on the polymerization process was discussed. Low temperatures promote the formation of polymers with high molecular weights and a predominantly syndiotactic structure. The effect of the steric hindrances arising during polymerization due to the formation of a three-dimensional cross-linked structure in the metal-containing polymer on the microstructure of polymer chain and on polymerization kinetics was considered.For part 24 seeBull. Acad. Sci., Div. Chem. Sci., 1992, 1609.For a preliminary communication see Ref.1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 500–503, March, 1993.     

Synthesis and reactivity of metal-containing monomers

Acid and neutral Co^II, Cu^II, Ni^II, Zn^II, Fe^II, and Fe^III maleates, fumarates, and itaconates were obtained and characterized. The methods for their synthesis were optimized, and the valence state and coordination of metals were studied. Co^II and Fe^II hydrogen maleates, Co^II maleate, and Co^II fumarate were examined by X-ray diffraction analysis. The ligands based on unsaturated dicarboxylic acids can be mono-, bi-, and tetradentate, which results in the formation of acid salts, chain and three-dimensional coordination polymers, whose double bond is not involved in the coordination. The strong antiferromagnetic exchange (μ_elf=1.41 and 0.34 μ_B at 290 and 80 K, respectively) was detected in Cu^II itaconate. Based on the data of Mössbauer spectroscopy, the partial reduction of Fe^III to Fe^II during the synthesis of Fe^III maleate was shown to occur: δFe=0.43 and 1.27 mm s^?1, ΔE _Q=0.57 and 3.13 mm s^?1 and Γ=0.37 and 0.28 mm s^?1 atT=298 K for Fe^III and Fe^II, respectively.     

Synthesis and reactivity of metal-containing monomers

Thermal transformations of Fe^III maleate, [Fe₃O(OOCCH=CHCOOH)₆]OH·3H₂O (1), in an autogenerated atmosphere and the change in the short-range surrounding of Fe atoms during thermolysis were studied. The thermal transformations of1 are accompanied by the following processes: dehydration with simultaneous rearrangement of the ligand environment and formation of maleic acid, and polymerization of the rearranged monomer and its decarboxylation at high temperatures. In the initial stage of decarboxylation, the destruction of the metal-carboxylate Fe₃O complex occurs followed by the formation of the Fe−Fe bond (r=0.246 nm). The oxidation of the Fe atoms is observed when the thermolysis duration increases. For Part 49, seeIzv. Akad. Nauk, Ser. Khim., 1998; 1145 [Russ. Chem. Bull., 1998,47, 1113 (Engl. Transl.)]. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1505–1510, August, 1998.     

Synthesis and reactivity of metal-containing monomers

Optically active mixed alkoxy orthotitanates with general formula Ti(OR¹)₂(OR²)(OR³) (R¹=Et, Buⁿ; R²=CH₂CH₂OCOC(Me)=CH₂; R³=menthyl, CH(Me)CH₂Me, CH(Ph)CH(NHMe)Me, CH(C₉H₆N)(C₉H₁₄N)) were obtained for the first time by transesterification. The Ti^IV monomers synthesized were characterized by elemental analysis, ozonolysis, and¹H and¹³C NMR and IR spectroscopy. Polymer products with optical activity were obtained by liquid phase radical copolymerization of Ti^IV-containing monomers. For Part 51, see Ref. 1. Deceased. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1739–1743, September, 1999.     

Synthesis and reactivity of metal-containing monomers

The reaction of Rh₆(CO)₁₅MeCN with allyldiphenylphosphine under mild conditions afforded the cluster-containing complex [Rh₆(CO)₁₄(μ,η²-PPh₂Ch₂CH=CH₂)]. Its molecular structure was characterized. The resulting complex is an octahedral Rh cluster with ten terminal and four μ₃-bridging CO ligands. The average Rh?Rh distance is 2.762(2) Å. The unsaturated ligand is additionally coordinated to the metal center (Rh(4)–C(232), 2.37(1) Å; and Rh(4)–C(233), 2.32(2) Å) to form a π-bond.     

Synthesis of some new arylindoles

New indole derivatives — 2-ethoxycarbonyl-5(p-acetylphenyl)indole andpara-substituted 2-diphenylindoles —key compounds for synthesis of new bisindoles, were synthesized from 4-acetyl-4-nitrodiphenyl.I. Dzhavakhishvili Tbilisi State University, Tbilisi 380028. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1351–1354, October, 1994. Original article submitted September 15, 1994.     

Synthesis of some new indolizines

The reaction between 4‐dimethylaminopyridine (DMAP) and 2‐bromoacetophenone(s) readily gives 1‐ [2‐(4‐substitutedphenyl)‐2‐oxoethyl]‐4‐(dimethylamino)pyridinium bromide ( 1–14 ). Action of aqueous NaOH on 1–8 generates the corresponding pyridinium ylide ( 15–22 ), which is isolated as a colored stable crystalline solid. Addition of 15–22 to dimethylacetylene dicarboxylate (DMAD) gives dimethyl 3‐(substitutedbenzoyl)‐7‐(dimethylamino)indolizine‐1,2‐dicarboxylate ( 23–30 ) in 46–62% yield.     

The influence of soft segments on some properties of new transparent segmented polyurethanes

This work describes the synthesis and structure of the new segmented polyurethanes (SPURs) formed from an aliphatic diisocyanate [1,1′‐methanediylbis(4‐isocyanatocyclohexane] (Desmodur W^®) and unconventional sulfur‐containing chain extender [2,2′‐methylenebis([4,1‐phenylene]methylenesulfanediyl)diethanol]. Soft segments were poly(oxytetramethylene)diol of  = 1000 g/mol (PTMO) or poly(hexametylene carbonate)diol of  = 860 g/mol (PHCD). For all the polymers, the structure, physicochemical, thermal, and mechanical properties were determined. In addition, for selected polymers, optical properties (refractive index and transparency), adhesive properties, and antimicrobial activity were also determined. The type and amount of soft segment used for the synthesis of SPURs had a significant effect on the properties of the polymers. SPURs from PHCD are characterized by higher glass transition temperatures, molar masses, hardness (up to 91/50°Sh in scale A/D), and tensile strengths (up to 36.5 MPa) but lower elongations at break compared with the SPURs with PTMO. The tests of adhesion and optical properties showed that the PHCD‐based SPUR was characterized by higher value of refractive index, transparency, and more than three times the adhesive strength than the PTMO‐based SPUR. Antimicrobial activity studies showed that the SPUR presence in the medium inhibited proliferation of both Gram‐positive and Gram‐negative bacteria. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis of some new fluorophenothiazines

The synthesis of various 3-substituted derivatives of 7-fluorophenothiazin-3-ol and their 5-oxides is described. The ir, uv and mass spectral data are also included.     

Synthesis and characterization of a new biodegradable polyurethanes with good mechanical properties

In the paper, a new biodegradable polyurethane(PU, PU-I) was prepared: the prepolymer was synthesized via bulk ring-opening polymerization with poly(ethylene glycol)(M_n= 600)(PEG600) as an initiator and L-lactide(L-LA), e-caprolactone(CL) as monomers, and the prepolymer was chain-extended with an isocyanate-terminated urethane triblock(macrodiisocyanate) to prepare the PU. The macrodiisocyanate, prepolymer and PUs were characterized by~1H NMR,~(13)C NMR, FT-IR, high resolution mass spectrometry(HR-MS), gel permeation chromatography(GPC), thermo gravimetric analysis(TGA),and differential scanning calorimetry(DSC). The corresponding PU films showed excellent mechanical properties with a tensile strength of 27.5 MPa and an elongation at break of 996%, and also maintained mechanical properties in physiological saline at 37℃ for more than three weeks, which appeared to be more suitable for biomedical applications.     

Synthesis of some new mesoionic heterocycles

The synthesis of various substituted 1-hydroxy-2-chloroacetyl-6-thia-10b-aza-2a-azoniaaceanthrylene hydroxide inner salt, 1-hydroxy-6-thia-10b-aza-2a-azoniaaceanthrylene hydroxide inner salt, 1-hydroxy-2-piperidinoacetyl-6-thia-10b-aza-2a-azoniaaceanthrylene hydroxide inner salt is described. The ir is also included.     

Synthesis of some new thorium phosphates

Some thorium phosphates have been synthesised: caesium–thorium phosphate, barium–thorium phosphate, thorium fluoride phosphate, thorium sulphate phosphate, and thorium silicate phosphate, starting from aqueous solutions. Their chemical composition was established by Electron Probe Microanalysis (EPMA) and/or by Particle Induced X-ray Emission (PIXE). The X-rays diffraction patterns and/or the infrared spectra are given for these series of thorium phosphate.     

Synthesis of polyurethanes from fluorinated diisocyanates

A number of polyurethanes based on fluorinated aliphatic diisocyanates, perfluorinated aromatic diisocyanates, and chlorinated aromatic diisocyanates have been prepared. The polyurethane prepared from perfluorotrimethylene diisocyanate and hexafluoropentanediol was a rubbery solid which hydrolyzed readily in air to a liquid or sticky solid but was stable if protected from moisture. The products of hydrolysis were isolated and identified. Polyurethanes based on hexafluoropentamethylene diisocyanate were synthesized by reaction of hexafluoropentanediamine with hexafluoropentamethylene bischloroformate and with tetrafluoro-p-phenylene bischloroformate. Polyurethanes were synthesized by reaction of tetrafluoro-p-phenylene diisocyanate with hexafluoropentanediol and pentanediol. Other perfluoroaryl diisocyanate-based polyurethanes were synthesized by reaction of tetrafluoro-m-phenylene diisocyanate with hexafluoropentanediol and with tetrafluoro-p-hydroquinone. Polyurethanes were also synthesized by reaction of tetrachloro-p-phenylene diisocyanate and 2,3,5,6-tetrachloro-p-xylylene-α,α′-diisocyanate with hexafluoropentanediol.