Contribution à l'étude de l'ionisation des films insolubles de polyélectrolytes stéréoréguliers

The surface potentials of monolayers of poly(methacrylic acid) (PMA) have been studied as a function of the pH of the subsolution. The influence of the macromolecular configuration on the properties of the ionizable groups was more particularly investigated. Orientation of molecules in the monolayer may be imposed by the stereoregularity of PMA (isotactic, atactic) and by the nature of the interface (air–water, cyclohexane–water). The results are analyzed in terms of theories of the ionic double layer (Gouy model, Donnan equilibrium) which permit the determination of the degree of ionization α of the film. The value of α gives indications about the orientation of specific groups of the macromolecular chain, i.e., of the ionized monomer units. Indeed, at the air–water interface, the film of isotactic PMA is more acid than that of the atactic sample, and at the cyclohexane–water interface, the degree of ionization is greater than at the air–water interface. These properties are the consequence of a modification of orientation of the hydrophilic groups with respect to the aqueous phase as a function of the stereoregularity of the sample and the nature of the interface. The variation of α with the pH of the substrate phase may be used to calculate an intrinsic dissociation constant K_s° of the molecules in the film. The value of K_s° is not modified by spreading conditions and remains very similar to that obtained in solution.     

NMR studies on the stereospecific polymerization of methyl vinyl ether. Part II. Polymerization by sulfuric acid–aluminum sulfate complex: Enantiomorphic catalyst sites model

Highly crystalline poly(methyl vinyl ether) (PMVE) was produced in toluene in a temperature range of 0 to ?20°C. with the use of sulfuric acid–aluminum sulfate complex (SA catalyst). It was found from the NMR spectra that these polymers contained more than 50% of the triad isotactic fraction and the melting point of the unfractionated polymer was about 130°C. However, PMVE containing a large amount of the isotactic fraction was insoluble in nitromethane, so the triad tacticity of highly crystalline PMVE could not be quantitatively determined. The molecular weight of PMVE increased with increasing conversion and increasing polymerization temperature. This behavior is different from that in metal halide catalysts. Also, the stereoregularity of PMVE decreased with increasing monomer concentration. However, addition of a polar solvent and increasing the polymerization temperature had little effect on the stereoregularity of the polymer. The increase in the isotactic fraction at high catalyst concentration and the difference in the monomer composition in the copolymerization of methyl vinyl ether with 2-chloroethyl vinyl ether by SA catalyst from that obtained by BF₃·O(C₂H₅)₂ suggest that the absorption of MVE on a catalyst surface is an important step in the propagation step by SA catalyst. The fraction of the triad tacticity calculated from the enantiomorphic catalyst sites model⁸ coincided with the experimental results. This fact shows that the steric structure of the adding monomer is determined only by the nature of the catalyst irrespective of the nature of a growing chain end. It is concluded, on considering also the results of the previous paper, that completely different factors can control the steric structure of a polymer even for the same monomer when different catalysts are used.     

Polymerization of N-vinylcarbazole by transition metal salts

The polymerization of N-vinylcarbazole (NVC) in the presence of transition metal salts such as WCI₆, MoCI₅, TaCl₅ and NbCl₅ under different reaction conditions was studied. In general, aromatic solvents were found to be superior to aliphatic solvents in the polymerization of NVC, i. e., both conversion and molecular weight were higher in aromatic solvents. It was observed that the polymerization reaction proceeds rapidly and almost quantitatively, even at low monomer concentration (< 5 × 10^?2M) and at low catalyst to monomer mole ratio (10^?5) in aromatic solvents. The copolymerization of NVC with acenaphthylene (ACN) was also investigated in solution at room temperature. The resulting homo- and copolymer were characterized by IR, NMR, x-ray diffraction, and elemental analysis. Thermal and photophysical properties are also reported. From the spectral data, the polymerization solvent was found to have a strong influence upon the polymer stereoregularity.     

Effects of mercaptides on the butyllithium-initiated polymerization of methyl methacrylate

The effect of mercaptides on the butyllithium-initiated polymerization of methyl methacrylate in toluene were investigated. The rates of polymerization were decreased by the addition of mercaptides, possibly owing to the formation of a relatively stabilized complex between the mercaptides and the active center of the polymerizing monomer. The stereoregularity was also affected by the addition of mercaptides. The effects increased in the order of increase in the bulk of the alkyl group of the mercaptides: n-propyl < isopropyl < tert-butyl < phenyl. The effects of mercaptides on the stereoregularity were larger than those of the analogous oxygen compounds. The concentrations of butyllithium and monomer had no effect on the stereoregularity.     

Relations entre la structure et les proprietes des membranes de polytetrafluoroethylene greffe—III. Membranes non-ionisables contenant de la poly-n-vinylpyrrolidone

Equilibrium properties (swelling) and transport phenomena (dialysis) of non-ionizable membranes, obtained by radiation grafting of N-vinylpyrrolidone onto thin PTFE films, were studied. Grafting was conducted by the direct method with monomer solutions in benzene. The overall activation energy of grafting determined between 20 and 50° is high (12.5 kcal mol^?1): the reaction is controlled by the monomer diffusion into PTFE film. The length of grafted chains increases with temperature.The molality of the membranes decreases when the temperature of grafting increases; for a given grafting ratio, the swelling is higher for membranes containing a small number of long grafts than for membranes with numerous short branches. The transfer of both ions and water is a function of the free volume in the films, it depends on the grafting ratio and is not influenced by the preparation conditions.     

Polymerisation et copolymerisation de monophenyl et de diphenylethylenes amorcees par des graphitures de metaux alcalins

The bulk polymerization at -24° of α-methylstyrene initiated by the alkali metals and the graphitides LiC₁₂, KC₂₄ and KC₃₆ has been studied. The tacticities of polymers have been measured by [¹H] NMR. The alkali metals give polymers having the same tacticity and the propagation of the stereoconfiguration is bernouillian; LiC₁₂ yields more racemic diads while KC₂₄ and KC₃₆ yield more meso diads and show a penultimate effect. By measuring the growing of the thickness of KC₂₄ flakes, it appears that the more sterically hindered a monomer the more slowly it penetrates into the graphitide. The copolymerizations at 25° of styrene with 1-1 diphenylethylene or 1–2 diphenylethylene (trans stilbene) (comonomer ratio 1/1) initiated by KC₂₄ in tetrahydrofuran (THF), xylene (XL), decahydronaphthalene (decalin DL) and cyclohexane (CH) have been studied. The amount of styrene units in the copolymers depends on the nature of the solvent: it increases as the interaction solvent-graphitide decreases. All the results support the view that the polymerization proceeds between the graphite layers.     

Utalisation des deutons et des tritons de faibles energies pour le dosage du carbone et de l’oxygene presents a la surface d’echantillons metalliques

The oxygen and carbon concentrations on metal surfaces were determined by two methods. The first method was based on the detection of the emitted particles in the¹²C(d,p)¹³C and¹⁶O(d, p)¹⁷O reactions, the second one on the measurement of the induced radioactivities in the¹²C(d,n)¹³N and¹⁶O(t,n)¹⁸F reactions, respectively. The results, obtained by the two different methods for high purity metals, were in agreement. A type of error which exists in the determination of trace amounts of carbon and oxygen in pure metals by combustion and reductive fusion was quantitatively demonstrated. This error exists also in the determination of oxygen by 14 MeV neutron bombardment.      

Synthese de polysiloxanes fluores. Partie II. Addition de thiols fluores sur des silanes insaturees

The addition of fluorinated thiols such as C₆F₁₃CH₂CH₂SH to silanes having an allylic or vinylic unsaturated group is described. A previous study on vinyl trimethylsilane and on chlorotrimethylsilane shows that the thiols react in a selective way, with the double bonds but not with the Si-Cl group. The addition compounds with chlorodimethyvinylsilane, dichloromethylvinylsilane, dichloromethylallylsilane and tetramethyltetravinylcyclotetrasiloxane are studied and identified by ¹H and ¹³C NMR. This new method of obtaining monomer silanes through a monoaddition reaction of fluorinated thiols gives the expected compounds with an excellent yield.     

Determination of Stability Constants of Cadmium(II) Complexes with Diallyl Disulfide,Dimethyl Disulfide and Diallyl Sulfide Using Differential Pulse Voltammetry

The study of the binding of heavy metal ions by organosulfur compounds of garlic is especially important for the understanding of many biological systems. Cadmium is a non-essential heavy metal known to be one of the most toxic environmental pollutant.Interactions between cadmium and diallyl disulfide (DADS), dimethyl disulfide (DMDS) and diallyl sulfide (DAS) were investigated by differential pulse voltammtery. Determination of the stability constants of cadmium(II) with DADS, DMDS and DAS complexes was based on the DeFord–Hume methodology that calculated from the dependence of the shift of cadmium( II) peak potential upon addition of the ligands DADS, DMDA and DAS separately. The results of this study provide evidence of the formation of 1: 1 and 1: 2 complexes between cadmium(II) and DADS, DMDS and DAS with stability constants (β) in the range of ca. 10^5.8–10^6.2 and 10^9.6–10^10.6 respectively.     

Conformations et stereoregularite de poly 2 vinyl pyridines—I Etude experimentale

Study of the average molecular optical anisotropy 〈γ²〉 of atactic and isotactic poly 2 vinyl pyridines of low polydispersity has been carried out in various solvents by means of depolarized Rayleigh scattering (D.R.S.) Experimental evidence (D.R.S. and viscosity) for free charges both on atactic and isotactic chains has been found in methanol and dimethyl formamide; their effect on 〈γ²〉 has been analyzed. The influence on molecular optical anisotropy of thermodynamic quality of the solvent has also been studied. Finally, comparison of the experimental optical anisotropies of atactic and isotactic structures reveals the strong effect of stereoregularity on the physical property under study.     

Synthesis and polymerization of long alkyl acetylenic compounds

A variety of long alkyl acetylenic compounds was synthesized and polymerized by using Rh(I) catalysts. Particularly, the monomer having a terminal hydroxyl group was converted into the high molecular weight of polymer in good conversion, which was soluble in THF, DMSO, and DMF. The high stereoregularity (cis) in the main chain was confirmed by ¹H‐NMR in DMSO‐d₆ and the rod‐like structure by wide‐angle X‐ray diffraction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3419–3427, 2000     

Stereocontrol Study in Radical Polymerization of 2-Acrylamido-2-methylpropane Sulfonic Acid in the Presence of Lewis Acids

Tacticity of poly-2-acrylamido-2-methylpropane sulfonic acid samples that were prepared via free radical polymerization in four different solvents, ethanol, dimethyl sulphoxide (DMSO), N, N-dimethylformamide (DMF) and water, were studied by ¹³C nuclear magnetic resonance (¹³C-NMR) techniques. In order to change isotacticity, two rare metal triflates, yttrium trifluoromethane sulfonate (Y(OTf)₃) and ytterbium trifluoromethane sulfonate (Yb(OTf)₃), were used. The stereoregularity of the obtained polymers in DMSO, water and DMF in the presence of the mentioned triflates did not show a noticeable alteration. But isotacticity of the samples prepared in ethanol was increased by about 17% in the presence 75 wt% Y(OTf)₃. In the absence of metal triflates, solvents did not have any significant effect on stereocontrol. In addition, the influence of temperature on isotacticity of the prepared samples was studied. By decreasing the reaction temperature, the isotacticity increased slightly.     

Effects of metal salts on polymerization. VI. Photo and thermally catalyzed polymerization of N-vinylimidazole in the presence of metal salts

Polymerization of 2-methyl-1-vinylimidazole (MVI) and 2-ethyl-1-vinylimidazole (EVI) was found to be markedly photosensitized in the presence of oxidizing metal salts such as UO₂(NO₃)₂, Ce(NH₄)₂(NO₃)₆, Hg(CH₃COO)₂, AgNO₃; non-oxidizing metal salts such as Zn^II did not act as photosensitizers. The interaction of monomer with a metal salt is discussed on the basis of infrared and electronic spectroscopy. This photopolymerization is very specific with respect to the kind of monomer. The polymerization of noncomplexing monomer (styrene) is not photosensitized by these metal salts. Consequently, photosensitized electron transfer between monomer and metal salt via complex formation is considered to be the most probable initiation mechanism. Cupric acetate and sodium chlorolaurate, which have been reported as efficient initiators for the polymerization of vinylpyridine and N-vinylcarbazole, respectively, act as linear terminators of growing radicals. The radical polymerizability of the zinc complex of MVI was studied by means of copolymerization with styrene. The reduction of the reactivity of MVI on complexing was explained by correlating with the spectroscopic observations. Because the polymerization system is heterogeneous, a detailed discussion was not possible.     

An imprinted polymer for removal of Cd<Superscript>2+</Superscript> from water samples: Optimization of adsorption and recovery steps by experimental design

A new ion-imprinted polymer（ⅡP） was synthesized by copolymerization of 4-vinylpyridine（monomer）, ethyleneglycoldimethacrylate（cross-linker） and 2,2-azobis-isobutyronitrile（initiator） in the presence of Cd²⁺ and quinaldic acid（complexing agent）.It was found that the adsorption capacity of IIP and blank polymer were 45.0 and 6.2 mg g^-1, respectively.The relative selectivity coefficients of the imprinted polymer for different binary mixture were also calculated. Compared to non-imprinted polymer（NIP）,theⅡP had higher selectivity for Cd（Ⅱ）.TheⅡP was used as a sorbent for cadmium extraction from water samples by using a simple batch extraction procedure.The effect of different parameters on Cd²⁺ extraction and its recovery from theⅡP were evaluated and optimized by using experimental design methodology.The optimized adsorption/desorption procedure was applied for cadmium removal from the real water samples.The obtained recoveries proved that thisⅡP could be used for removal of trace cadmium ions from water samples.     

Spectres RMN des Polysaccharides et de leurs Dérivés: Influence des Substituants sur le Déplacement Chimique 13C

Methyl and acetyl substituent effects on ¹³C chemical shift have been determined on (α 1→3), (α 1→4), (β 1→3) and (β 1→4) linked polysaccharides such as pseudo-nigerane, β-cyclodextrine, amylose, laminarane and cellulose. Methyl α- and β-D -glucopyranoside have been used as monomer model compounds. Shift determination of hydroxylated and substituted polysaccharides requires unambiguous assignment of their ¹³C spectra. Selective heteronuclear spin decoupling and the isotope effect of deuterated hydroxyl have been used as assignment techniques.     

Study of the concentration and separation of cadmium with microcrystalline phenolphthalein modified by crystal violet

A new method for cadmium separation and concentration with microcrystalline phenolphthalein modified by crystal violet (CV) was developed in the paper. In the presence of potassium iodide (KI) and CV, cadmium are quantitatively absorbed on microcrystalline phenolphthalein in the pH range 1.0-6.0 as the forms of water-insoluble ion-associated complexes (CdI₃⁻)·(CV⁺) and (CdI₄²⁻)·(CV⁺)₂. Effect of different parameters such as phenolphthalein amount, stirring time, the concentration of CV and KI, various salts and metal ions was studied in detail. During the present study, a significant enhancement of the extraction of cadmium was observed. Cd(II) can be completely separated from Zn(II), Fe(II), Co(II), Ni(II), Mn(II), Cr(III) and Al(III) in this microcrystalline system and well concentrated without the interference of these metal ions at high level. The possible reactive mechanism of cadmium concentration has been discussed. Analytical results obtained by this new method were very gratifying.     

Complexation du 2‐[(5‐méthyl­pyrazolyl)méthyle]benzimidazole par les chlorures de cuivre et de cadmium

The structures of dichloro{2‐[(5‐methyl‐1H‐pyrazol‐3‐yl‐κN²)methyl]‐1H‐1,3‐benzimidazole‐κN³}copper(II), [CuCl₂(C₁₂H₁₂N₄)], and di‐μ‐chloro‐bis(chloro{2‐[(5‐methyl‐1H‐pyrazol‐3‐yl‐κN²)methyl]‐1H‐1,3‐benzimidazole‐κN³}­cadmium(II)), [Cd₂Cl₄(C₁₂H₁₂N₄)₂], show that these compounds have the structural formula [ML(Cl)₂]_n, where L is 2‐[(5‐methylpyra­zolyl)methyl]benzimidazole. When M is copper, the complex is a monomer (n = 1), with a tetrahedral coordination for the Cu atom. When M is cadmium (n = 2), the complex lies about an inversion centre giving rise to a centrosymmetric dimer in which the Cd atoms are bridged by two chloride ions and are pentacoordinated.     

Synthesis of polystyenes with different stereoregularities by anionic polymerization

The stereoregularity of polystyrene prepared by anionic polymerization was determined by means of ¹³C-NMR spectroscopy. The stereoregularity changed with such polymerization conditions as catalyst, solvent, and temperature. Sodium naphthalene as catalyst gave a syndiotactic-rich polystyrene of 66–68% syndiotactic dyads independently of solvent and temperature, while potassium and cesium naphthalenes as catalyst produced polystyrenes with different stereoregularities ranging from syndiotactic-rich to isotactic-rich configurations, depending on solvent and temperature. The mechanism of anionic polymerization which caused the difference in stereoregularity was discussed from the viewpoint of growing ionic species.     

Alternating copolymerization of styrene and methyl α-chloroacrylate with diethylaluminum chloride

The alternating copolymerization of styrene and methyl α-chloroacrylate (MCA) with diethylaluminum chloride (Et₂AlCl) in benzene at 0°C has been investigated. The copolymer has an equimolar composition irrespective of the feed monomer composition, the copolymer yield and the amount of Et₂AlCl used. The copolymerization proceeds first very rapidly and then rather slowly after attaining a certain yield which varies proportionally to the amount of Et₂AlCl used. A maximum copolymer yield is observed at about 60% MCA feed composition. The ¹H-NMR analyses of dyad, triad, and pentad of the alternating deuterated α-d-St-MCA copolymer indicate that the configuration of this copolymer can be explained by a single parameter, coisotacticity σ(σ = 0.69). A favorable mechanism of the alternating propagation as well as of the stereoregularity control is discussed.     

Greffage de l'acide methacrylique sur des films de poly(chlorure de vinyle) par la methode radiochimique directe

Since PVC films do not swell in pure methacrylic acid (MAA) the films were subjected to gamma-rays while dipped in various mixtures MAACHCl₂. Under such conditions, the grafting proceeds smoothly and its rate exhibits a flat maximum for the mixture containing ca. 50% (molar) monomer. The rate satisfies the relationship Rate = KI^0.6 and the over-all activation energy of the process is 4 kcal/mole. MAA grafted PVC films do not swell in solvents for PMAA (such as water or methanol) even for high grafting ratios. This result is unexpected since PTFE films grafted with either acrylic or methacrylic acid swell to a large extent in water and are excellent membranes. The swelling of the grafted PVC films was investigated in mixtures 1,2-dichloroethylene -methanol. It was found that the extent of swelling was highest in the mixture containing 35% methanol. The unusual swelling properties of these grafted films are attributed to strong polar interactions between PVC and PMAA chains.