吡咯并[2,1,5-cd]中氮茚酰腙衍生物的合成及Cu2+荧光探针行为

设计合成了吡咯并[2,1,5-cd]中氮茚酰腙衍生物6. 测试了其紫外光谱和荧光光谱, 研究了其对铜离子的选择性识别作用. 结果表明, 化合物6作为铜离子荧光探针, 受常见离子干扰较小, 对于铜离子有着较高的选择性和较低的检出限.     

Thermodynamics of substituted pyrazolone IX: potentiometric, spectrophotometric and conductometeric studies of 4-(4-chlorophenylazo)-3-methyl-1-[2-hydroxy-3-morphilinopropane 1-yl]-2-pyrazolin-5-one and its metal complexes.

The dissociation constants of 4-(4-chlorophenylazo)-3-methyl-1-[2-hydroxy-3-morphilinopropane-1-yl]-2-pyrazolin-5-one (CAMP) has been determined potentiometrically in 0.1 M KCl and 40% (v/v) ethanol-water mixture. The stepwise stability constants of the formed complexes of Mn2+, Co2+, Ni2+, Cu2+, Zn2+, La3+, Ce3+ and UO(2)2+, with CAMP have been determined. The stability of the formed complexes were found as follows: UO(2)2+ > Ce3+ > La3+ > Mn2+ < Co2+ < Ni2+ < Cu+ > Zn2+. The thermodynamic parameters (deltaG, deltaH and deltaS) for CAMP and its complexes were evaluated and discussed. The dissociation process is non-spontaneous, endothermic and entropically unfavourable. The formation of the complexes have been found to be spontaneous, exothermic or endothermic (depending on the metal) and entropically favourable. The stoichiometries of these complexes were determined spectrophotometrically and conductometrically and indicated the formation of 1:1 and 1:2 (metal:ligand) complexes.     

1-乙酰基-3-(2-羟基-4,6-二甲氧基苯基)-5-芳基-2-吡唑啉的合成及Cu2+荧光探针行为

设计合成了6个1-乙酰基-3-(2-羟基-4,6二甲氧基苯基)-5-芳基-2-吡唑啉化合物4a～4f.测试了它们的紫外光谱和荧光光谱,研究了其对铜离子的选择性识别作用.结果表明,化合物4f作为铜离子荧光探针,受常见离子干扰较小,对于铜离子有着较高的选择性和较低的检出限.     

过渡元素杂多钨硅酸盐氧化还原性质的研究

本文通过极谱和循环伏安法,结合紫外光谱和X射线光电子能谱,研究了过渡元素钨硅杂多酸盐Kn[SiM(H2O)W11O39](M=Mn^2^+,Fe^3^+,Co^2^+,Ni^2^+,Zn^2^+,Cd^2^+)在溶液中的氧化还原性质,提出了它们的还原机理.杂多阴离子的极谱半波还原电位E1/2的顺序为Ni^2^+>Co^2^+>Zn^2^+>Fe^2^+>Mn^2^+,发现杂多阴离子的E1/2与其组分中的过渡元素的电负性X和过渡金属离子与水合电子反应速率常数的对数logke-分别有线性关系,讨论了过渡元素对杂多阴离子氧化还原性的影响.     

1-乙酰基-3-(2-羟基-4,6-二甲氧基苯基)-5-苯基-2-吡唑啉的合成及锌离子探针的研究

设计合成了1-乙酰基-3-(2-羟基-4,6-二甲氧基苯基)-5-苯基-2-吡唑啉(4), 测试了其紫外光谱和荧光光谱, 研究了其对锌离子的选择性识别作用. 结果表明, 化合物4作为锌离子荧光探针, 受常见离子的干扰较小, 对于锌离子有着较高的选择性和较低的检出限.     

微波衍生-离子对高效液相-磺化四苯基卟啉光度法同时测定痕量镍、铜、锰和锌

 用磺化四苯基卟啉 (TPPS4 )作柱前衍生试剂 ,在微波作用下进行衍生反应 ,研究了衍生和分离Ni2 + ,Mn2 + ,Zn2 + 和Cu2 + 的最佳条件。在 75 0W的微波作用下衍生反应 3min ,在C18柱上采用乙腈 水 (体积比为 2 2 5∶77 5 )体系作流动相 ,四乙基溴化铵 (TEABr)作离子对试剂 ,在 415nm处检测 ,建立了微波衍生 离子对高效液相快速分离、光度检测Ni2 + ,Mn2 + ,Zn2 + 和Cu2 + 的新方法。络合物和反应试剂在 15min内出峰完毕。Zn2 + ,Cu2 + ,Ni2 + 和Mn2 + 的检测限分别为 0 0 5 μg/L ,0 0 1μg/L ,0 10 μg/L和 0 40 μg/L。     

笼形聚氨肟树脂的研究：碱处理对吸附性能的影响

研究碱处理的笼形聚氨肟树脂（ＢＣＡＯ）对二价金属离子的吸附行为。吸附结果若生成２：１配的，得Ｍｇ＾２＋，Ｃａ＾２＋，Ｂａ＾２＋，Ｍｎ＾２＋，Ｃｏ＾２＋，Ｎｉ＾２＋，Ｚｎ＾２＋，Ｃｄ＾２＋，Ｐｂ＾２＋，Ｃｕ＾２＋离子的吸附效率分别是２７．１、２９．２、３０．４、２９．０、２７．１、３０．８、４５．０、３９．８、６０．３、６２．１％，Ｈｇ＾２＋离子的吸附效率高达１０５％，表明在吸附过程中同时生成２：１     

3d金属离子对H2O2氧化活性艳红的催化性能

以H2O2氧化活性艳红为研究对象,探讨了七种3d金属离子的催化性能、影响因子及其作用、氧化降解动力学和催化作用机理．通过对pH值、氧化剂用量、金属离子浓度、温度的影响研究,确定了七种3d轨道过渡金属离子的催化性能大小为：Fe^3＋〉Cu^2＋〉Co^2＋〉Mn^2＋〉Cr^3＋〉Ni^2＋〉Zn^2＋．在此基础上得到了该催化氧化反应的一级动力学模型,通过一级动力学模型求得各个金属离子的表观活化能,从活化能的大小得出受温度影响大小的顺序为：Cr^3＋〉Mn^2＋〉Co^2＋〉Cu^2＋〉Ni^2＋〉Zn^2＋〉Fe^3＋．     

大孔型腐植酸树脂的合成及其对重金属离子的螯合性

交联的聚苯乙烯(PS)通过偶氮键—N=N—或酯、醚键与腐植酸(HA)相连接枝得珠状大孔型腐植酸树脂(HAR)。当HA/PSNH_2的重量比为0.7—1.0,PSN_2~+Cl~-偶联PH13时制得的偶氮型腐植酸树脂(AHAR)对重金属离子有优良的吸附性。延长PSCH_2Cl与HA的反应时间可提高酯醚型腐植酸树脂(EHAR)对Cu~(2+)的吸附量。红外光谱探讨了HAR的结构。AHAR的吸附容量为1.01mmol~(2+)Cd/g树脂,对Ni~(2+)、Mn~(2+)、Cu~(2+)、Co~(3+)、Zn~(2+)为0.6—0.53mmol离子/g树脂。重金属离子在AHAR上的分配系数为 Cu~(2+)(8.7×10~3)>Cd~(2+)(3.8×10~2)>Zn~(2+)(2.4×10~2)>Ni~(2+)(1.8×10~2)>Mn~(2+)(4.9×10)。 pH6.5时AHAR能定量吸附Cu~(2+)、Cd~(2+)、Ni~(2+)、Mn~(2+),并能用INHNO_3定量洗脱。AHAR可再生,重复使用,分析了四种天然水、自来水中痕量上述金属离子的浓度。     

Acid-base and metal-ion-binding properties of xanthosine 5'-monophosphate (XMP) in aqueous solution: complex stabilities, isomeric equilibria, and extent of macrochelation

The four acidity constants of threefold protonated xanthosine 5'-monophosphate, H3(XMP)+, reveal that at the physiological pH of 7.5 (XMP-H)(3-) strongly dominates (and not XMP(2-) as given in textbooks); this is in contrast to the related inosine (IMP(2-)) and guanosine 5'-monophosphate (GMP(2-)) and it means that XMP should better be named as xanthosinate 5'-monophosphate. In addition, evidence is provided for a tautomeric (XMP-HN1)(3-)/(XMP-HN3)(3-) equilibrium. The stability constants of the M(H;XMP)+ species were estimated and those of the M(XMP) and M(XMP-H)- complexes (M2+=Mg2+, Ca2+, Sr2+, Ba2+, Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+) measured potentiometrically in aqueous solution. The primary M2+ binding site in M(XMP) is (mostly) N7 of the monodeprotonated xanthine residue, the proton being at the phosphate group. The corresponding macrochelates involving P(O)2(OH)- (most likely outer-sphere) are formed to approximately 65% for nearly all M2+. In M(XMP-H)- the primary M2+ binding site is (mostly) the phosphate group; here the formation degree of the N7 macrochelates varies widely from close to zero for the alkaline earth ions, to approximately 50% for Mn2+, and approximately 90% or more for Co2+, Ni2+, Cu2+, Zn2+, and Cd2+. Because for (XMP-H)(3-) the micro stability constants quantifying the M2+ affinity of the xanthosinate and PO3(2-) residues are known, one may apply a recently developed quantification method for the chelate effect to the corresponding macrochelates; this chelate effect is close to zero for the alkaline earth ions and it amounts to about one log unit for Co2+, Ni2+, Cu2+. This method also allows calculation of the formation degrees of the monodentatally coordinated isomers; this information is of relevance for biological systems because it demonstrates how metal ions can switch from one site to another through macrochelate formation. These insights are meaningful for metal-ion-dependent reactions of XMP in metabolic pathways; previous mechanistic proposals based on XMP(2-) need revision.     

Spectral,thermal and magnetic investigations of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 4-methylphthalates

Conditions for the preparation of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 4-methylphthalates were investigated and their composition, solubility in water at 295 K and magnetic moments were determined. IR spectra and powder diffraction patterns of the complexes prepared with molar ratio of metal to organic ligand of 1.0:1.0 and general formula: M [ CH₃C₆H₃(CO₂)₂]·nH₂o (n=1-3) were recorded and their decomposition in air were studied. During heating the hydrated complexes are dehydrated in one (Mn, Co, Ni, Zn, Cd) or two steps (Cu) and next the anhydrous complexes decompose to oxides directly (Cu, Zn), with intermediate formation of carbonates (Mn, Cd), oxocarbonates (Ni) or carbonate and free metal (Co). The carboxylate groups in the complexes studied are mono- and bidentate (Co, Ni), bidentate chelating and bridging (Zn) or bidentate chelating (Mn, Cu, Cd). The magnetic moments for paramagnetic complexes of Mn(II), Co(II), Ni(II) and Cu(II) attain values 5.92, 5.05, 3.36 and 1.96 M.B., respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Irving-Williams order in the framework of connectivity index ³χv enables simultaneous prediction of stability constants of bivalent transition metal complexes

Logarithms of stability constants, log K? and log β?, of the first transition series metal mono- and bis-complexes with any of four aliphatic amino acids (glycine, alanine, valine and leucine) decrease monotonously with third order valence connectivity index, 3χv, from Cu2+ to Mn2+. While stability of the complexes with the same metal is linearly dependent on 3χv, stability constants of Mn2+, Fe2+, Co2+, and Ni2+complexes with the same ligand show a quadratic dependence on 3χv. As Cu2+ complexes deviate significantly from quadratic functions, models for the simultaneous estimation of the stability constants, yielding r = 0.999 (S.E. = 0.05) and r = 0.998 (S.E. = 0.11), for log K? and log β?, respectively, were developed only for Mn2+, Fe2+, Co2+, and Ni2+ complexes with amino acids.     

两种磺酰胺类化合物的合成及其对Fe3+的氧化-还原荧光“开-关”性质

合成了两种磺酰胺类化合物, 并研究了其荧光性能. 通过它们对金属阳离子的选择性识别实验, 发现其在乙醇水溶液中均对Fe3+有专一性的识别作用, 并在NH2OH·HCl和H2O2的存在下, 两种化合物对Fe3+都具有氧化-还原荧光“开-关”作用.     

水杨醛-4-甲氧基苯甲酰腙识别锌离子的研究

设计合成了荧光传感分子水杨醛-4-甲氧基苯甲酰腙(SAMB),通过IR、1HNMR和元素分析确证了其结构,利用紫外-可见吸收光谱和荧光光谱考察了其对不同阳离子的识别作用。结果表明,SAMB的荧光发射对锌离子表现出高选择性响应,且形成1∶1型配合物。乙醇中锌离子的加入导致SAMB的荧光增强328倍,而其他过渡金属离子只引起SAMB的荧光的略微增强。初步探讨了受体分子与锌离子的结合模式与荧光增强机理。     

Fourier transform infrared spectra of transition metal ion-containing polyanilines synthesized in different reaction conditions

Fourier transform infrared spectroscopy has been employed to investigate the detailed chain structure changes during the chemical oxidative polymerisation of aniline in different reaction conditions including different polarity reaction medium, reaction temperature, reactants molar ratio and in the presence of different transition metal ions such as Fe2+, Co2+, Ni2+ and Cu2+. The results show that stronger polarity reaction medium and lower reaction temperature were beneficial to obtain 1,4-para-disubstituted linear chain structure polyaniline with higher electrical conductivity. The higher oxidation degree polyaniline contained more linear chain structure than that in lower oxidation degree. Polyanilines containing Fe2+ and Cu2+ had more linear chain structure than that containing Co2+ and Ni2+. These observations were in accordance with experimental measurements of electrical conductivity.     

Use of miniaturised isotachophoresis on a planar polymer chip to analyse transition metal ions in solutions from metal processing plants

An electrolyte system, using malic acid as a complexing agent, has been developed to allow the determination of transition metal cations using miniaturised isotachophoresis. The method allowed the simultaneous determination of Mn2+, Cr3+, Fe2+, Co2+, Zn2+ and Ni2+ to be made without interference from other common ions. Limits of detection were calculated to be in the range 0.5-1.0mg l(-1) for Mn2+, Cr3+ Co2+ and Zn2+ and 2.0 mg l(-1) for Fe2+ and 4.7 mg l(-1) for Ni2+. The successful analysis of five industrial samples, containing a range of these metal ions, obtained from metal processing plants were achieved in under 13 min. The separations were performed on a poly(methyl methacrylate) chip with integrated platinum wire conductivity detection electrodes.     

Equilibrium study of selected divalent d-electron metals adsorption on A-type zeolite

The objective of the presented study was to investigate the adsorption of Cu, Co, Mn, Zn, Cd and Mn on A-type zeolite. The isotherms for adsorption of metals from their nitrates were registered. The following adsorption constants K of metals were found: 162,890, 124,260, 69,025, 16,035, 10,254, and 151 [M(-1)] for Cu, Co, Mn, Zn, Cd, and Ni, respectively, for the concentration range 10(-4)-10(-3) M. On the other hand, the investigation of pH influence on the distribution constants of metals showed that the adsorption of metals proceeds essentially through an ion-exchange process, surface hydrolysis, and surface complexation. The supplementary results from DRIFT, scanning electron microscopy, and X-ray diffraction methods confirmed the presumption about the possible connection between the electronic structure of divalent ions and their adsorption behavior, showing that ions with d5 and d10 configurations such as Mn2+, Zn2+, Cd2+, with much weaker hydrolytic properties than Cu2+ and Ni2+, strongly interact with the zeolite framework and therefore their affinity to the zeolite phase is much stronger when compared with that of the Ni2+ ion, but at the same time not as strong as the affinity of the Cu2+ ion, the latter forming a new phase during the interaction with zeolite framework. For Zn2+, during inspection of the correlation between the proton concentration H/Al and zinc concentration Zn/Al on the zeolite surface, the formation of the surface complex [triple bond]S-OZn(OH) was proposed. A correlation between the heterogeneity of proton concentrations H/Al on Me-zeolite surfaces and the hydrolysis constants pKh of Me2+ ions was found.     

A tryptophan-containing fluoroionophore sensor with high sensitivity to and selectivity for lead ion in water

We report herein a fluoroionophore sensor derivated from tryptophan that shows high sensitivity (detection limit up to 0.15 microM) and specific selectivity for lead ion (Pb2+) over Ca2+, Cd2+, Co2+, Cr3+, Cu2+, K+, Mg2+, Na+, Fe2+, Mn2+, Ni2+ and Zn2+ in aqueous solution.     

Acid-base and metal-ion-binding properties of 9-[2-(2-phosphonoethoxy)ethyl]adenine (PEEA), a relative of the antiviral nucleotide analogue 9-[2-(phosphonomethoxy)ethyl]adenine (PMEA). An exercise on the quantification of isomeric complex equilibria in solution

The acidity constants of 3-fold protonated 9-[2-(2-phosphonoethoxy)ethyl]adenine, H3(PEEA)+, and of 2-fold protonated (2-phosphonoethoxy)ethane, H2(PEE), and the stability constants of the M(H;PEEA)+, M(PEEA), and M(PEE) complexes with M2+ = Mg2+, Ca2+, Sr2+, Ba2+, Mn2+, Co2+, Ni2+, Cu2+, Zn2+, or Cd2+ have been determined (potentiometric pH titrations; aqueous solution; 25 degrees C; I = 0.1 M, NaNO3). It is concluded that in the M(H;PEEA)+ species, the proton is at the phosphonate group and the metal ion at the adenine residue. The application of previously determined straight-line plots of log K(M(R-PO3))M versus pK(H(R-PO3))H for simple phosph(on)ate ligands, R-PO3(2-), where R represents a residue that does not affect metal-ion binding, proves that the M(PEEA) complexes of Co2+, Ni2+, Cu2+, Zn2+, and Cd2+ as well as the M(PEE) complexes of Co2+, Cu2+, and Zn2+ have larger stabilities than is expected for a sole phosphonate coordination of M2+. For the M2+ complexes without an enhanced stability (e.g., Mg2+ or Mn2+), it is concluded that M2+ binds in a monodentate fashion to the phosphonate group of the two ligands. Combination of all of the results allows the following conclusions: (i) The increased stability of the Co(PEE), Cu(PEE), Zn(PEE), and Co(PEEA) complexes is due to the formation of six-membered chelates involving the ether-oxygen atom of the aliphatic residue (-CH2-O-CH2CH2-PO3(2-)) of the ligands with formation degrees of about 15-30%. (ii) Cd(PEEA) forms a macrochelate with N7 of the adenine residue (formation degree about 30%); Ni(PEEA) has similar properties. (iii) With Zn(PEEA), both mentioned types of chelates are observed, that is, Zn(PEEA)(cl/O) and Zn(PEEA)(cl/N7), with formation degrees of about 13 and 41%, respectively; the remaining 46% is due to the "open" isomer Zn(PEEA)(op) in which the metal ion binds only to the PO3(2-) group. (iv) Most remarkable is Cu(PEEA) because a fourth isomer, Cu(PEEA)(cl/O/N3), is formed that contains a six-membered ring involving the ether oxygen next to the phosphonate group and also a seven-membered ring involving N3 of the adenine residue with a very significant formation degree of about 50%. Hence, PEEA(2-) is a truly ambivalent ligand, its properties being strongly dependent on the kind of metal ion involved. Comparisons with M2+ complexes formed by the dianions of 9-[2-(phosphonomethoxy)ethyl]adenine (PMEA) and related ligands reveal that five-membered chelates involving an ether-oxygen atom are considerably more stable than the corresponding six-membered ones. This observation offers an explanation of why PMEA is a nucleotide analogue with excellent antiviral properties and PEEA is not.     

Thermodynamic and kinetic aspects of metal binding to the histidine-rich protein, Hpn

The histidine-rich protein, Hpn, binds to essential metals Ni2+, Cu2+, Zn2+ and a therapeutic metal Bi3+ with the in vitro affinities in the order of Cu2+ > Ni2+ > Bi3+ > Zn2+. In contrast, the in vivo (in E. coli) protection by the protein is in the order of Ni2+ > Bi3+ > Cu2+ approximately Zn2+. The release of Ni2+ from the protein follows a two-step process consisting of a rapidly established equilibrium and subsequently a rate-determining step (dissociation of Hpn-Ni...EDTA to Ni-EDTA). Our work suggests the nickel storage and homeostasis in H. pylori as the primary role of Hpn.