Preparation of an IMI dye (imidazole functional group) containing a 4-(N,N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole fluorophore for labeling of phosphomonoesters

We are studying dye-imidazole conjugates ("IMI dyes") as reagents for labeling phosphomonoesters such as nucleotides. Previously we have employed a BODIPY dye in our IMI reagents, and analyzed the labeled products by capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) involving an argon ion laser. (The BODIPY fluorophore is a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene). Here we broaden the technology by preparing a DBD-IMI dye [DBD = 4-(N,N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole], and using a helium-cadmium laser. While DBD-IMI (IMI3) is about 50x more stable photolytically than a BODIPY-IMI dye (IMI2, a conjugate of a BODIPY dye with histamine, was tested), the detection limit for IMI2 (5.10(-11) M; S/N = 5, CE-LIF with an argon ion laser) is tenfold better than that for IMI3 (5.10(-10) M, S/N = 5, helium-cadmium laser). IMI3 conjugates of the four major DNA nucleotides were prepared and detected by CE-LIF.     

Sensitive determination of erythrosine and other red food colorants using capillary electrophoresis with laser-induced fluorescence detection

Capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) was applied to separation and sensitive determination of red food colorants. Diode pumped frequency-doubled Nd:YAG laser (532 nm) was used as an excitation source in a laboratory-built CE-LIF system. For highly fluorescent erythrosine B (E127), an extrapolated limit of detection (LOD) of 0.4 ng mL(-1) (S/N=3) was achieved. Extrapolated LODs of other tested red additives, such as carmoisine, E122 (0.5 microg mL(-1)); amaranth, E123 (0.2 microg mL(-1)); ponceau 4R, E124 (0.3 microg mL(-1)) and red 2G, E128 (0.3 microg mL(-1)) were about one-order lower compared to results obtained with CE with absorbance detection in UV/vis (CE-UV/vis). The main advantages of using CE-LIF for analysis of food samples are high selectivity and minimization of matrix effect. To our knowledge, this is the first use of CE-LIF for determination of red food colorants.     

Investigation of capillary electrophoresis-laser induced fluorescence as a tool in the characterization of sewage effluent for fluorescent acids: determination of salicylic acid

The investigation of emerging contaminant issues is a proactive effort in environmental analysis. As a part of this effort, sewage effluent is of current analytical interest because of the presence of pharmaceuticals and their metabolites and personal care products. The environmental impact of these components is still under investigation but their constant perfusion into receiving waters and their potential effect on biota is of concern. This paper examines a tool for the characterization of sewage effluent using capillary electrophoresis-laser induced fluorescence (CE-LIF) with a frequency-doubled laser operated in the ultraviolet (UV). Fluorescent acidic analytes are targeted because they present special problems for techniques such as gas chromatography-mass spectrometry (GC-MS) but are readily accessible to CE-LIF. As an example of the application of this tool, salicylic acid is determined near the 100 ng/L (7 x 10(-10) M) level in sewage effluent. Salicylic acid is a metabolite of various analgesics. Relatively stable in the environment, it is a common contaminant of municipal sewage systems. Salicylic acid was recovered from freshly collected samples of the effluent by liquid-liquid extraction. Confirmation of identity was by electron ionization GC-MS after conversion of the salicylic acid to the methyl ester by means of trimethylsilyldiazomethane. CE-LIF in the UV has revealed more than 50 individual peaks in the extract and a background response that suggests a large and indeterminate number of additional compounds are present. These data together with complementary techniques provide information on the complexity and components in these effluent streams.     

Protein labeling with red squarylium dyes for analysis by capillary electrophoresis with laser-induced fluorescence detection

Two new red luminescent asymmetric squarylium dyes (designated "Red-1c and Red-3") have been shown to exhibit absorbance shifts to longer wavelengths upon the addition of protein, along with a concomitant increase in fluorescence emission. Specifically, the absorbance maxima for Red-1c and Red-3 dyes are 607 and 622 nm, respectively, in the absence of HSA, and 642 and 640 nm in the presence of HSA, making the excitation of their protein complexes feasible with inexpensive and robust diode lasers. Fluorescence emission maxima, in the presence of HSA, are 656 and 644 nm for Red-1c and Red-3, respectively. Because of the inherently low fluorescence of the dyes in their free state, Red-1c and Red-3 were used as on-column labels (that is, with the dye incorporated into the separation buffer), thus eliminating the need for sample derivatization prior to injection and separation. A comparison of precolumn and on-column labeling of proteins with these squarylium dyes revealed higher efficiencies and greater sensitivities for on-column labeling, which, when conducted with a basic, high-salt content buffer, permitted baseline resolution of a mixture of five model proteins. LOD for model proteins, such as transferrin, alpha-lactalbumin, BSA, and beta-lactoglobulin A and B, labeled with these dyes and analyzed by CE with LIF detection (CE-LIF) were found to be dependent upon dye concentration and solution pH, and are as low as 5 nM for BSA. Satisfactory linear relationships between peak height (or peak area) and protein concentration were obtained by CE-LIF for this on-column labeling method with Red-3 and Red-1c.     

Determination of aristolochic acid in Chinese herbal medicine by capillary electrophoresis with laser-induced fluorescence detection

We have demonstrated the analysis of aristolochic acids (AAs) that are naturally occurring nephrotoxin and carcinogen by capillary electrophoresis in conjunction with laser-induced fluorescence detection (CE-LIF). Owing to lack of intrinsic fluorescence characteristics of oxidized AAs (OAAs), reduction of the analytes by iron powder in 10.0 mM HCl is required prior to CE analysis. The reduced AAs (RAAs) exhibit fluorescence at 477 nm when excited at 405 nm using a solid-state blue laser. By using 50.0 mM sodium tetraborate (pH 9.0) containing 10.0 mM SDS, the determination of AA-I and AA-II by CE-LIF has been achieved within 12 min. The CE-LIF provides the LODs of 8.2 and 5.4 nM for AA-I and AA-II, respectively. The simple CE-LIF method has been validated by the analysis of 61 Chinese herbal samples. Prior to CE analysis, OAAs were extracted by using 5.0 mL MeOH, and then the extracts were subjected to centrifugation at 3,000 rpm for 5 min. After reduction, extraction, and centrifugation, the supernatants were collected and subjected to CE analysis. Of the 61 samples, 14 samples contain AA-I and AA-II, as well as 10 samples contain either AAI or AAII. The relative standard deviation (RSD) values of the migration times for AA-I and AA-II are less than 2.5% and 2.1% for three consecutive measurements of each sample. The RSD values for the peak heights corresponding to AA-I and AA-II in most samples are about 8.0% and 10.0%, respectively. The result shows that the present CE-LIF approach is sensitive, simple, efficient, and accurate for the determination of AAs in real samples.     

Determination of nitrocellulose by capillary electrophoresis with laser-induced fluorescence detection

The industrial application of nitrocellulose depends on its nitrogen content. When nitrocellulose presents high nitrogen content is used in the manufacture of explosives whereas nitrocellulose with low nitrogen content is used to make a wide range of daily and non-explosive products (e.g. cigarettes, paints, lacquers). This fact makes really important to develop a method for the determination and discrimination of nitrocellulose samples. This work reports, for the first time, the qualitative determination of nitrocellulose previously derivatized with 8-aminopyrene-1,3,6-trisulfonic acid (APTS) by capillary electrophoresis (CE-LIF) with laser-induced fluorescence detection (CE-LIF). APTS-labeled nitrocellulose was determined in lowly and highly nitrated nitrocellulose samples present in collodions and smokeless gunpowders, respectively, after their pulverization in liquid nitrogen. The method described enables the visual discrimination of different nitrocelluloses on the basis of the different electrophoretic profiles obtained, and provides a useful tool to determine nitrocellulose. Additionally, the use of field-amplified sample injection (FASI) enabled enhanced sample detection, which made it possible to determine nitrocellulose contained in ∼15 μg of gunpowder.     

Intramolecular triplet energy transfer in multi-chromophoric dyes and its influence on the photostability

The photostability of organic dyes plays a very important role in practically all aspects of the development and applications of these dyes. In recent years, intramolecular transfer of triplet excitation energy between isolated chromophores on the same molecule has been a subject of intensive studies. Many multi-chromophoric organic dyes with covalent linkage between the chromophores, one of which can act as a triplet acceptor of the excess energy, have been synthesized and studied. The significant increases in photostability of such assembled dyes have been reported, suggesting that some chromophores can act as internal photostabilizers. These modified dyes have enhanced photostability and hence potential applications in a wide range of areas such as laser dyes, electroluminescent (EL) devices and solar cells.     

Determination of abscisic acid by capillary electrophoresis with laser-induced fluorescence detection

A novel method based on capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIF) was developed for the determination of abscisic acid (ABA), which is an essential phytohormone during plant growth and development. ABA was labeled with 8-aminopyrene-1,3,6-trisulfonate via reductive amination in presence of acetic acid and sodium cyanoborohydride. The derivatization yield was maximized by optimizing several derivatization parameters including derivatization reagent concentration, reaction temperature and time. The conjugate was separated and quantitated by CE-LIF. The linearity of ABA was determined in the range from 0.1 to 10 micromol l(-1) with a correlation of 0.9979. The derivatization limit of detection for ABA was found to be 56 fmol (corresponding to the concentration of 2.8 x 10(-8) mol l(-1)). The detection limit for ABA was 5.5 amol for an injection volume of 5 nl. As a preliminary application, the proposed method was successfully applied to determining trace amount of ABA in the crude extracts of tobacco without extra purification and enrichment procedure and showed a better selectivity and sensitivity than those conventional methods used in determination of ABA.     

基于适配体亲和毛细管电泳-激光诱导荧光检测的凝血酶分析

以一种高亲和力适配体作为亲和荧光探针,以自建的毛细管电泳-激光诱导荧光(CE-LIF)检测装置为基础,建立了一种高灵敏、快速测定人凝血酶的方法。荧光标记的凝血酶适配体特异性地与凝血酶结合并形成稳定的凝血酶-适配体复合物,采用CE-LIF对复合物进行分离检测,从而测定凝血酶浓度。探讨了盐离子种类及浓度对适配体与凝血酶结合的影响,并在选定的电泳条件下对凝血酶检测的线性范围、检出限和重现性进行了测定。结果表明,盐离子存在的条件下适配体与凝血酶的亲和力降低,不利于两者的结合;人血清溶液中,凝血酶浓度在0.25～10 nmol/L范围内与复合物峰面积具有良好的线性相关性(r20.991),检出限(S/N3)为55.6 pmol/L;精密度和回收率测定结果均能满足分析的要求。     

Capillary electrophoresis as a simple and sensitive method to study polysaccharides of Sinorhizobium sp. NGR234

We report the minimum amounts of polysaccharides (6.5 ng) that can be studied using capillary electrophoresis-laser-induced fluorescence (CE-LIF) and describe the separation of the various monosaccharides susceptible to occur in Sinorhizobium cell wall. On-gel hydrolysis of the polysaccharides is described. It allowed the easy and rapid determination of the monosaccharide composition of the excised lipopolysaccharides. The composition obtained fits with gas chromatography-mass spectrometry (GC-MS) results. This study underlines the simplicity of using CE-LIF, which remains an entirely "water medium" method, unlike GC-MS which is, in addition, less sensitive (at least 100-fold) than CE-LIF.     

Determination of phycobiliproteins by capillary electrophoresis with laser-induced fluorescence detection

Phycobiliproteins are derived from the photosynthetic apparatus of cyanobacteria and eukaryotic algae. They are composed of a protein backbone to which linear tetrapyrrole chromophores are covalently bound. Furthermore, they are water-soluble highly fluorescent, and relatively stable at room temperature and neutral pH. For this reason, capillary electrophoresis-laser induced fluorescence (CE-LIF) seems the idea method for determination of these important proteins. The effects of buffer additives such as sodium dodecyl sulfate (SDS)and putrescine on the separation of the three major phycobiliprotein types, namely allophycocyanin, phycocyanin, and phycoerythrin, with excitation and emission maxima at 652/660, 615/647, and 565(494)/575 nm, respectively, are considered. Detection limits for these proteins by CE-LIF are some 60-500 times better than by absorbance detection. The development of a fast and sensitive CE-LIF assay such as this is of potential significance to our understand ing of chemical and biological oceanographic processes.     

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素A，α－E，D_3，K_3

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素Ａ，α－Ｅ，Ｄ＿３，Ｋ＿３李桂凤，李缙扬，郝征红，聂燕，孟兆宏，李学春（山东省农业科学院中心实验室济南２５０１００）１前言对脂溶性维生素的分析，被许多国内外分析专家认为是高难度的分析项目。本...     

Capillary electrophoresis with laser-induced fluorescence detection for detailed studies on N-linked oligosaccharide profile of therapeutic recombinant monoclonal antibodies

Total N-linked oligosaccharide profiling method for recombinant monoclonal antibody (rmAb) using capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) and an approach for detailed structural analysis of N-linked oligosaccharide were developed. A CE-LIF method using 2-aminobenzoic acid (2-AA) as a fluorogenic reagent allowed sensitive detection of several minor peaks besides typical asialo-biantennary complex type oligosaccharides in the analysis of N-linked oligosaccharide from a commercial rmAb pharmaceutical, rituximab. These minor peaks were successfully assigned as sialo-biantennary complex type and high-mannose type oligosaccharides by comparison with the migration times of 2-AA derivatized oligosaccharides which were separately fractionated and determined by high-performance liquid chromatography (HPLC) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). In development of biopharmaceuticals, it is important to evaluate these minor oligosaccharides, because some of these minor glycans are likely to influence immunogenicity and clearance rate in vivo. The repetitive analysis using CE-LIF showed excellent precision in relative corrected peak areas. These results demonstrate that the present CE-LIF method is applicable for both structural characterization and quantitative profiling of N-linked oligosaccharides derived from rmAb pharmaceuticals. The present method will be a powerful tool for rapid, quantitative and exhaustive evaluation of N-linked oligosaccharides in various stages of rmAb pharmaceutical development such as clone selection, bioprocess control, and routine lot release testing to ensure product efficacy and consistency.     

Capillary electrophoresis fingerprinting, quantification and mass-identification of various 9-aminopyrene-1,4,6-trisulfonate-derivatized oligomers derived from plant polysaccharides

Various plant polysaccharide derived mono- and oligosaccharides were derivatized with the fluorescent 9-aminopyrene-1,4,6-trisulfonate (APTS) and subjected to capillary electrophoresis (CE) in combination with laser induced fluorescence (LIF) detection. CE-LIF was suitable for mol-based quantification of various APTS-monosaccharides. CE-LIF of APTS-oligosaccharides showed high resolutions, while analysis times were at maximum 15 min. The coupling of CE to electrospray-iontrap mass spectrometery (MS) with online UV detection showed to be a powerful technique in the identification of APTS-oligosaccharides. For the first time, various APTS-xylo-oligosaccharides, having either no, O-acetyl, arabinosyl or xylosyl substitutions at varying positions, were identified by using CE-LIF and CE-MS(n).     

Specificity and sensitivity of fluorescence labeling of surface species

FLOSS (fluorescence labeling of surface species) enables one to identify and quantify very low concentrations of surface functional groups. Unlike most surface analytical techniques, FLOSS can provide absolute, as well as relative, surface coverage determination. However, as with any other surface derivatization technique, FLOSS provides a lower limit to surface coverage. The specificity of FLOSS for a particular functional group is the key to this application. In one FLOSS protocol, amine-modified dyes are used to label surface aldehyde groups. However, amine-modified dyes, in principle, can bind to both aldehyde and carboxyl groups, limiting specificity. In this paper, we report that the FLOSS protocol devised results in less than 0.5 % of the carboxyl-modified dyes binding to the surface amine groups. Therefore, the presence of carboxyl groups on the surface should have a limited effect on the detection of aldehyde groups by amine-modified dye. Quenching of fluorescence can potentially affect quantitative measurements. To address this issue, the densities of surface functional groups of CHO-, NH2-, and epoxy-coated glass surfaces were quantified using FLOSS and compared to surface densities estimated by other methods. The FLOSS technique was extended to glass surfaces by using visible absorbing and emitting dyes. The lower detection limit is on the order of 10(9) groups/cm2.     

免疫毛细管电泳-激光诱导荧光分析DNA加合物的方法学研究

DNA加合物是一类重要的生物标志物,可应用于人体致癌物暴露监测、癌症风险评价和人群易感性研究。DNA加合物作为生物标志物的应用需要安全、灵敏、快速的先进分析技术。我们利用免疫毛细管电泳-激光诱导荧光分析,发展了高灵敏的DNA加合物分析方法和技术。本文主要介绍了相关的仪器研制及方法学研究。方法学研究涉及DNA加合物荧光探针的合成和表征、抗体与DNA加合物的相互作用及其结合计量学、抗原-抗体复合物的稳定化和DNA驱动电泳聚焦技术。     

Determination of D-penicillamine and tiopronin in human urine and serum by HPLC-FLD and CE-LIF with 1,3,5,7-tetramethyl-8-bromomethyl-difluoroboradiaza-s-indacene

Two rapid and sensitive analytical methods are developed for the determination of D-penicillamine (D-PEN) and tiopronin (TP) through high-performance liquid chromatography with fluorescence detection (HPLC-FLD) and capillary electrophoresis with laser-induced fluorescence detection (CE-LIF). A boron-dipyrrolemethene (BODIPY) fluorescence labeling reagent, 1,3,5,7-tetramethyl-8-bromomethyl-difluoroboradiaza-s-indacene (TMMB-Br) was successfully applied to derivatize these two thiol drugs. Fluorescein was used as the internal standard (IS) for the quantification of D-PEN and TP in CE-LIF. The derivatization and separation conditions were optimized carefully. Under the optimum conditions, the HPLC and CE separation of D-PEN and TP could be achieved within 12?min. The limits of detection were as low as 2.0 nmol/L for HPLC-FLD and 0.47 nmol/L for CE-LIF. The drugs in human urine and serum samples were determined successfully, and the recoveries were 95.0–06.7% and 95.2–104.3%, respectively.     

Simultaneous separation of five major ribonucleic acids by capillary electrophoresis with laser-induced fluorescence in the presence of electroosmotic flow: Application to the rapid screening of 5S rRNA from ovarian cancer cells

RNA integrity is important in RNA studies because poor RNA quality may impact downstream methodologies. This study proposes a rapid and cost-effective method for the determination of RNA integrity based on CE-LIF in the presence of electroosmotic flow. The proposed method uses poly(ethylene) oxide (M_avg = 4,000,000 Da) as a sieving matrix for total RNA separation. Ethidium bromide (μg mL⁻¹) was dissolved in a polymer solution as an interchelating dye for on-column fluorescent labeling. The 28S rRNA, 18S rRNA, 5.8S rRNA, 5S rRNA and tRNA from the total human RNA extracted from the cells were fully separated using the proposed method. The lowest detectable concentration of total RNA achieved was 100 pg μL⁻¹ with a 6 min sample injection followed by on-column concentration. In addition, the temperature-induced degradation of total RNA was observed by CE-LIF. The electropherograms revealed more fragmentation of 28S and 18S rRNAs by temperature-induced hydrolysis compared with the 5.8S rRNA, 5S rRNA and tRNA. Therefore, the results indicated that RNA degradation should be considered for long-term, high-temperature incubations in RNA-related experiments involving RNA hybridization. The proposed method is furthermore, applied to the determination of 5S rRNA overexpressed in ovarian cancer cells as compared to the cervical cancer cells. Overall, CE-LIF is highly promising for rapid screening of ovarian cancers without tedious pre-amplification steps.     

芯片毛细管电泳激光诱导荧光快速分离检测麻黄碱类兴奋剂

研究用芯片毛细管电泳激光诱导荧光检测系统分离测定经7-chloro-4-n itrobenzo-2-oax-1,3-d iazole(NBD-C l)衍生的麻黄碱和伪麻黄碱的实验条件。采用胶束毛细管电动色谱分离体系(12 mmol/L SDS 10mmol/L硼砂缓冲液,pH 9.0),在45 mm长的通道上实现了麻黄碱和伪麻黄碱的快速分离,一次分离小于1.5m in。10~100 mg/L范围内,峰高与浓度呈良好的线性关系,麻黄碱、伪麻黄碱的检出限分别是0.83 mg/L和1.10 mg/L。所建立的方法应用于尿中麻黄碱和伪麻黄碱的分离测定,取得满意的结果。     

Photofading of ballpoint dyes studied on paper by LDI and MALDI MS

The determination of the age of an ink entry from a questioned document is often a major problem and a controversial issue in forensic sciences. Therefore, it is important to understand the aging process of the different components found in ink. The aim of this work is to characterize the degradation processes of methyl violet and ethyl violet, two typical ballpoint dyes by using laser desorption/ionization (LDI) and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS), and to evaluate the possible application of the method to forensic examination of documents. The mass spectrometric methods were first tested and were found to be adequate for the purpose of this work. Moreover, it is possible to analyze the dye from a stroke directly from the paper (LDI-MS), so the sample preparation is minimized. The degradation of the dyes methyl violet and ethyl violet in strokes from a ballpoint pen was studied under laboratory conditions influenced by different factors such as light, wavelength of light, heat, and humidity. Then, strokes from the same ballpoint were aged naturally in the dark or under the influence of light over one year and then analyzed. The results show that the degradation of these dyes strongly depends on light fluence. Humidity also increases degradation, which can be explained by the basicity of the paper. The influence of heat on the degradation process was found to be rather weak. It was also observed that the dyes from the ink strokes did not show significant degradation after one year of storage in the dark. In conclusion, the storage conditions of a questioned document and the initial composition of the dyes in the ink have to be known for correct interpretation of the age of an ink entry. Measurements over longer periods of time are necessary to follow the degradation of dyes exempt from light exposure. LDI was found adequate and very useful for the analysis of ballpoint dyes directly from paper without further pretreatment.