Specific method for spectrophotometric determination of molybdenum in soil

A new, simple and specific spectrophotometric method for the determination of Mo in the soil extracts is described. Mo(VI) is reduced to Mo(V) with sodium borohydride and allowed to react with SCN^– ions in the presence of cationic and neutral surfactants e.g. CPC and TX-100 in the acidic aqueous solution. The molar absorptivity of the complex in both the aqueous, and toluene solutions is (2.30) × 10⁴ 1mol^–1 cm^–1 at absorption maximum, 460 nm. The extraction-procedure preconcentrated Mo at least 3-folds. the detection limit is 125ng Mo/g soil. The analytical variables of the method have been optimised and composition of the complex is proposed. None of the tested foreign ion interfered in the determination of Mo up to a large amount. An attempt for the removal of Fe-interference in the determination of Mo in soil extract has been described. The method has been found to be satisfactorily applicable for the determination of Mo in hot water leachates and acid digested soil solutions at lower ppm levels.     

An improved spectrophotometric determination of silicate in water based on molybdenum blue

Silicate in water is determined by a heteropoly blue method with ascorbic acid and antimony as reducing agents; antimony does not participate in the complex but enhances the absorbance. The method is comparatively fast and sensitive. Beer's law is obeyed for 0.02–1.2 μg ml^?1 silica. Interferences are discussed.     

二甲氧基羟基苯基荧光酮光度法测药物中的钼

钼是维持人体健康的重要微量元素之一,主要作用是防止龋齿,促进铁的新陈代谢,保持男子的性能力,预防贫血,尤其具有抗癌防癌等生物学效应。钼缺乏与很多疾病有关,尤其是动脉粥样硬化的致病因素。为了保持人体健康,就要保证微量元素钼的正常摄入量。世界卫生组织估     

Anion-exchange separation and spectrophotometric determination of molybdenum and tungsten in silicate rocks

A combined ion-exchange spectrophotometric method has been developed for the determination of molybdenum and tungsten in silicate rocks. After the decomposition of samples with a mixture of sulphuric, nitric and hydrofluoric acids, traces of molybdenum and tungsten are separated from other elements by anion-exchange in acid sulphate media containing hydrogen peroxide. The adsorbed molybdenum and tungsten can easily be stripped from the column by elution with sodium hydroxide-sodium chloride solution. The adsorption and desorption steps provide selective concentration of molybdenum and tungsten, allowing the simultaneous spectrophotometric determination of the two metals with dithiol. Results on the quantitative determination of molybdenum and tungsten in the U.S. Geological Survey standard samples are included.     

Spectrophotometric determination of iron in aluminium metal and some non-ferrous alloys

A new, sensitive and selective spectrophotometric method is suggested for the determination of traces of iron(III) based on complex formation with hematoxylin in presence of cetyltrimethylammonium bromide (CTAB). Addition of CTAB shifted the absorption maximum of the iron-hematoxylin complex from 630 to 640 nm and increased its molar absorptivity from 9.88 × 10⁴ to 1.16 × 10⁵ 1·mol^–1·cm^–1. The method adhered to Beer's law up to 0.4 and 0.2 g/ml of iron in presence and absence of CTAB, respectively. The corresponding values of Sandell's sensitivity were 0.5 and 0.6 ng·cm^–2. The effect of reagent and surfactant concentrations, pH and standing time were investigated. EDTA, tartrate and sodium fluoride were used as masking agents for most of the interfering ions. The method was successfully used for the determination of iron in aluminium metal and some non-ferrous alloys.     

Stopped-flow injection simultaneous determination of phosphate and silicate using molybdenum blue

Kinetic information for the phosphate–molybdate–ascorbic acid reaction can be obtained by making use of a very simple manually operated stopped-flow injection (FI) system. Various parameters (concentrations of reagents, flow rate, mixing coils, and volume of flow cell) were investigated for determination of phosphate. A stopped-FI system should be arranged for low degree of mixing (of reactants) and low dispersion so that good signals of rate changes will be observed. Simultaneous determination of phosphate and silicate by the stopped-FI technique is proposed, using a laboratory-made semi-automatic stopped-FI Analyzer with LED-based photometer. It is based on kinetic separation of phosphate and silicate using molybdenum blue. The proposed procedure has been demonstrated for the application to water samples. The results obtained agree with that of a standard method.     

Spectrophotometric and derivative spectrophotometric determination of palladium(II) using pyridopyridazine dithione in the presence of non-ionic surfactant

Pyridopyridazine dithione (PPD) was synthesized as a new sensitive and selective reagent for spectrophotometric and derivative spectrophotometric determination of palladium(II). In aqueous and micellar medium, PPD forms 1:4 complexes having molar absorptivities of 4.68 × 10⁴ and 5.74 × 10⁴lmol^–1 cm^–1 at 570 and 615 nm, respectively. Beer's law was obeyed up to 2.2 and 2.5 g ml^–1 with detection limits of 0.2 and 0.1g ml^–1. The relative standard deviations for 1.23g ml^–1 were 2.6 and 1.3%, in the absence and presence of Triton X-100. In fourth-derivative mode, the regression equation, linear range, detection limit and RSD for 0.075 g ml^–1 wereD ₄ = 4.3C + 1.5 × 10^–3, 0.013 – 0.23 g ml^–1, 3.7 ng ml–1 and 0.78%, respectively. The ionization constants of the reagent and stability constants of the complexes were evaluated. The method is free from interference by most common metal ions and anions. The method was applied for determination of palladium in activated charcoal.     

Spectrophotometric determination of cationic and anionic surfactants with anionic dyes in the presence of nonionic surfactants,part I: A general aspect

The behavior of color development of anionic azo dyes, methyl orange and its analogues, was examined in aqueous media by changing the microenvironment of the dyes. The addition of alcohols, organic onium ions, anionic surfactants and nonionic surfactants brought about a decrease of the band at wavelengths near 480 nm and an increase of the band at wavelengths near 420 nm. Such a shift toward the shorter wavelengths in spectra was attributed to the change of the micro-environment around the dyes from a polar field to a less polar field; that is, the shift is caused by the change of the contribution of the following resonance forms, On the basis of the color change phenomena, the spectrophotometric methods for the determination of organic onium ions and anionic surfactants were proposed.     

Flow-injection spectrophotometric determination of molybdenum and vanadium with carminic acid in the presence of cetyltrimethylammonium bromide

The color-forming reactions of molybdenum(VI) and vanadium(IV) with carminic acid (CA) in the presence of cetyltrimethylammonium bromide (CTAB) were used in the flow-injection determination of these metals. The micellar medium enhances the spectrophotometric features of the Mo(VI)-CA and V(IV)-CA binary complexes, and the higher solubility of these complexes when the CTAB concentration is above critical micelle concentration permits the easy application of flow-injection systems. Under the optimum conditions, linear calibration graphs were obtained from 0.76 to 28.8 g/ml for molybdenum and from 0.30 to 9.1 g/ml for vanadium. The detection limits were 0.33 and 0.16 g/ml for molybdenum and vanadium, respectively. The selectivity of the method was investigated and the procedure was successfully applied to the determination of molybdenum in steels and pharmaceuticals and of vanadium in petroleum products.     

Fast spectrophotometric determination of titanium in rocks with 3,4-dihydroxybenzoic acid

A fast Spectrophotometric method has been developed for titanium determination in geological matrices, based on the mixture of the sample solution with an exact volume of a single chromogenic solution containing acetate buffer, ascorbic acid and 3,4-dihydroxybenzoic acid DHB, which forms with titanium(IV) ions a yellow complex with absorption maximum at 380 nm. The following parameters were studied: complex stability, pH effect, amount of DHB, amount of acetate buffer, obedience to Beer's law, amount of ascorbic acid and iron masking. The results demonstrated that titanium can be determined in the pH range 4.0–5.0, with a molar absorptivity of 1.43 × 10⁴ 1·mol^–1 cm^–1 and a limit of detection of 2.3 ng/ml. The methodology that allows analysis of 30 samples per hour. Common anions and cations do not interfere, even when present in large amounts. Iron(III) interference can be easily eliminated by reduction to iron(II) using ascorbic acid. Analytical characteristics of the proposed procedure, such as calibration sensitivity, analytical sensitivity, limit of detection and coefficient of variation, were determined. The procedure was applied for titanium determination in various standard geological matrices, with results of satisfactory accuracy and precision (RSD<1%).     

A new validated HPLC method for the determination of quercetin: Application to study pharmacokinetics in rats

A simple, accurate, and reproducible high‐performance liquid chromatography (HPLC) method has been developed and validated for the quantification of quercetin (QR) in rat plasma. The method involves a simple protein precipitation procedure to extract both QR and thymoquinone (TQ), the internal standard. The chromatographic analysis was achieved on a Shimadzu LC 20 A HPLC system equipped with a Supelcosil LC‐18 T C₁₈ column and an isocratic mobile phase consisting of 0.3% trichloroacetic acid in water and acetonitrile HPLC‐grade (50:50, v /v) run at a flow rate of 0.9 mL/min for 13 min. The UV detection wavelength was set at 254 nm. The method exhibited good linearity (R ² > 0.994) over the assayed concentration range (0.10–25 μg/mL) and demonstrated good intra‐day and inter‐day precision and accuracy (relative standard deviations and the deviation from predicted values were <20%). This method was also successfully applied for studying the pharmacokinetics of QR in rats following a single oral dose of QR to evaluate its pharmacokinetic parameters in rats.     

An improved flow-injection system for spectrophotometric determination of molybdenum and tungsten in tool steels

A flow-injection procedure for simultaneous spectrophotometric determination of tungsten and molybdenum in steel alloys is proposed. The method exploits the catalytic effects of Mo(VI) and W(VI) on the rate of iodide oxidation by hydrogen peroxide under acidic conditions. A novel strategy for ion-exchange separation of the potential interfering species is proposed, and an AG50W-X8 cationic resin mini-column is used. The sample is injected twice, originating two sequential plugs, citrate being added to one of them in order to suppress the W(VI) catalytic activity thus providing the kinetic discrimination.The system handles 70 samples per hour and requires 1.6 mg KI per determination. A linear response is verified up to 10 mg l⁻¹ Mo (or W) in the injectate, and signal additivity is 98-103%. Results are precise (R.S.D. < 0.04) and in agreement with ICP-OES. Running a standard reference material (IPT-50) assessed also accuracy.     

A standard addition titration method for the determination of fluorine in silicate rocks

Silicate minerals have been analysed for fluoride, after decomposition with sodium carbonate and zinc oxide, by a standard addition titration technique. The main advantages of the method are its precision and the elimination of errors arising from separate preliminary calibration.     

Spectrophotometric determination of Fe(III) with tiron in the presence of cationic surfactant and its application for the determination of iron in Al-alloys and Cu-based alloys

A sensitive Spectrophotometric method for the determination of iron with tiron and a cationic surfactant, cetylpyridinium chloride, at pH 5.6 is reported. The complex is extracted into a chloroform-propan-2-ol (41) mixture and shows maximum absorbance at 520 nm. Beer's law is obeyed in the range 1–14 g/ml with an average molar absorptivity of 15800 l mol^–1 cm^–1. The molar ratio as determined by Job's method for Fe:tiron:CPC is 143. Interferences by various ions are examined. Zr, Ti and Mo interfere heavily. The method is applied for the determination of iron in Al-based and Cu-based alloys, using appropriate masking agents.     

Surfactant-mediated extraction of iron and its spectrophotometric determination in rocks, minerals, soils, stream sediments and water samples

An extraction spectrophotometric method for iron determination in rocks, minerals, soils, stream sediments and water samples has been developed. At pH 3-4, iron (III) forms a 1:2:1 ternary complex with thiocyanate and cetyltrimethylammonium bromide (Fe/SCN/CTAB) which is extracted into ethyl acetate. The readily formed purple complex is suitable for extraction spectrophotometric determination of iron in rocks and related materials from submicrogram to milligram levels. The method is free from any interference due to commonly associated ions present in the matrices of rock samples. The present method is at least fourfold more sensitive (ε=3.2×10⁴ l mol⁻¹ cm⁻¹) than the conventional thiocyanate method and, in addition to the enhanced sensitivity and selectivity, it has got definite advantages over the corresponding binary thiocyanate system in terms of substantial improvement in the stability of the complex formed and broadening of Beer's law adherence range (0-6.0 mg/l). The method has been applied to a number of geological and hydrogeochemical samples for the determination of iron and the results obtained have been found to be favourably comparable with those obtained from the standard methods.     

A novel kinetic-spectrophotometric method for determination of nitrites in water

A simple, selective and sensitive kinetic method for the determination of nitrite in water was developed. The method is based on the catalytic effect of nitrite on the oxidation of methylene blue (MB) with bromate in a sulfuric acid medium. During the oxidation process, absorbance of the reaction mixture decreases with the increasing time, inversely proportional to the nitrite concentration. The reaction rate was monitored spectrophotometrically at λ = 666 nm within 30 s of mixing. Linear calibration graph was obtained in the range of 0.005–0.5 μg mL⁻¹ with a relative standard deviation of 2.09 % for six measurements at 0.5 μg mL⁻¹. The detection limit was found to be 0.0015 μg mL⁻¹. The effect of different factors such as acidity, time, bromate concentration, MB concentration, ionic strength, and order of reactants additions is reported. Interference of the most common foreign ions was also investigated. The optimum experimental conditions were: 0.38 mol L⁻¹ H₂SO₄, 5 × 10.4 mol L⁻¹ KBrO₃, 1.25 × 10.5 mol L⁻¹ MB, 0.3 mol L⁻¹ sodium nitrate, and 25°C. The proposed method was conveniently applied for the determination of nitrite in spiked drinking water samples.     

Rapid spectrophotometric method (aqueous and extractive) for the determination of titanium in silicate rocks

A sensitive and highly selective aqueous as well as extractive spectrophotometric method has been developed for the determination of titanium(IV) using 2,3-dihydroxynaphthalene (H(2)ND) as a chromogenic agent. The reagent (H(2)ND) forms a 1:3 (TiOH(3+):ligand) complex at pH 4-9. The molar absorptivity and Sandell's sensitivity are 3.2 x 10(4) l . mol(-1)mol . cm(-1) and 0.001 microg/cm(2), respectively at lambda(max) 375 nm. The method has been found highly selective for Ti(IV) determination in rock samples. Solvent extraction of Ti(IV) in ethylacetate greatly improves the detection limit of the method. The method has been successfully applied to diverse silicate rock samples and results obtained are favourably comparable with those obtained from the tiron method. The reagent (H(2)ND) used in the present investigation is a much better variant than tiron for titanium(IV) determination in silicate rock samples in terms of sensitivity, selectivity, operational simplicity and economy.     

Use of the molybdenum-thiocyanate-rhodamine 6G ternary complex for spectrophotometric molybdenum determination without extraction

A modified thiocyanate method without extraction by using rhodamine 6G as a secondary ligand was developed. Molybdenum in 1.0×10⁻² M HCl, after the addition of ascorbic acid, was heated for 10 min in a 90 °C water bath for reduction. Suitable amounts of glycerine, Triton X-100, rhodamine 6G solutions and 2+1 (v/v) 9 M H₂SO₄+3 M KHSO₄ were added in this order. This solution was allowed to cool to room temperature and the absorbance at 570 nm was measured against a reagent blank 45 min after the addition of thiocyanate solution and the second aliquot of Triton X-100 solution. The complex was stable for at least 4 h, the order of reagent addition was important, and thiocyanate should be in large excess. Beer’s law was obeyed over the range 0.9×10⁻⁶ to 1.1×10⁻⁵ M Mo with the molar absorptivity being 1.1×10⁵ l mol⁻¹ cm⁻¹. The R.S.D. for the determination of 0.7 mg Mo l⁻¹ was 1.83% (n=8). Possible interferences of various cations and anions on molybdenum determination were studied. The proposed method was applied to the determination of molybdenum in a dental alloy, Wiron 99.     

Simultaneous determination of fluorine and chlorine in silicate rocks by a rapid spectrophotometric method

A rapid accuiate method is described for simultaneous determination of fluorine and chlorine in silicate rocks by taking, separate aliquots of the single sample dissolution. Fluorine, without separation, was determined by means of the zirconium-criochrome cyanine R complex, whereas chlorine was determined by means of the stable iron (III) thiocyanate complex. The mctliod was tested with standard rocks. Results with geochemical standards were comparable with analyses reported by others. Application to several acidic, mafic, and ultramafic rock samples, gave results with a relative standard deviation of less than 5 %.     

紫外差示分光光度法同时测定含苯系物废水中苯胺和苯酚

苯胺、苯酚在不同酸度的水溶液中具有不同的结构和紫外吸收光谱。以苯胺水溶液为测定液,以等浓度的苯胺酸溶液为参比液;以苯酚碱溶液为测定液,以等浓度的苯酚水溶液为参比液,分别测定其吸光度。结果表明:在280 nm处,当苯胺质量浓度为1~100 mg/L时;在287 nm处,当苯酚质量浓度为1~30 mg/L时,苯胺、苯酚的吸光度与浓度之间存在良好的线性关系,据此建立了紫外差示分光光度法。用此法不需分离直接测定了含苯系物废水中的苯胺和苯酚,回收率分别大于94.6%和96.7%。