Measurement of SO2 solubility in ionic liquids

Measurements of the solubility of sulfur dioxide (SO(2)) in the ionic liquids 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([hmim][Tf(2)N]) and 1-n-hexyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide ([hmpy][Tf(2)N]) at temperatures from 25 to 60 degrees C and pressures up to 4 bar indicate that large amounts (up to 85 mol %) of SO(2) dissolve in ionic liquids by simple physical absorption.     

Physical Properties of Binary Alcohol + Ionic Liquid Mixtures at Several Temperatures and Atmospheric Pressure

In this study, densities and speeds of sound were measured over the whole composition range, at T = (298.15, 303.15 and 308.15) K and p = 0.1 MPa, for the binary systems of ethanol, or 1-propanol, or 2-propanol and 1-butyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide, or 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide. The density and speed of sound data were used to calculate the corresponding excess molar volumes and excess molar isentropic compressions, which were fitted with the Redlich–Kister equation. From the obtained results, a discussion was carried out in terms of interactions and structure factors in these binary mixtures.     

Surface Tension of Binary Mixtures of 1-Alkyl-3-Methyl-Imidazolium Bis(trifluoromethylsulfonyl)imide Ionic Liquids with Alcohols

New experimental surface tension data have been provided at 283.15, 298.15, 313.15 K and atmospheric pressure for binary mixtures of 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide and 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide ionic liquids with the alcohols: methanol, ethanol, 1-propanol, 2-propanol, l-butanol and 1-pentanol. The experimental results show that the surface tensions of these mixtures depend systematically on the alkyl chain length of the ionic liquid and alcohol, composition and temperature. Surface tension changes on mixing have been calculated and adequately fitted by the Redlich–Kister polynomial equation. The adjustable parameters and the standard deviations between experimental and calculated values are reported.     

Effect of the pressure on the viscosities of ionic liquids: Experimental values for 1-ethyl-3-methylimidazolium ethylsulfate and two bis(trifluoromethyl-sulfonyl)imide salts

A new falling-body viscometer has been implemented to measure viscosity of liquids in a temperature range from (313.15 to 363.15) K at pressures up to 150 MPa. The accuracy of the viscometer was verified after comparing experimental results of squalane with previous literature data finding an average absolute deviation lower than 1.5%. With this device, we have measured viscosity values for three ionic liquids: 1-ethyl-3-methylimidazolium ethylsulfate, 1-butyl-1-methylpyrrolidinium bis(trifluoro-methylsulfonyl)imide and 1-(2-methoxyethyl)-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide within the temperature and pressure ranges noted above. The experimental values were correlated as a function of temperature and pressure with four different equations. In addition, we have analysed the pressure–viscosity derived properties for these fluids and for other five ionic liquids using literature values.     

Solvent polarities and kamlet-taft parameters for ionic liquids containing a pyridinium cation

Five recently synthesized pyridinium ionic liquids [(1-butyl-4-methylpyridinium, 1-octylpyridinium, 1-octyl-2-methylpyridinium, 1-octyl-3-methylpyridinium, and 1-octyl-4-methylpyridinium, all with anion bis(trifluoromethylsulfonyl)imide], were investigated to establish the influence of substituting a methyl group and the influence of alkyl chain length on the cation on polarity ET(N) and on three Kamlet-Taft parameters: dipolarity/polarizabilty (pi*), hydrogen-bond acidity (alpha), and hydrogen-bond basicity (beta). Experimental measurements cover the range 25 to 65 degrees C.     

Solubility of erythromycin in ionic liquids

(Solid + liquid) and (liquid + liquid) phase equilibria of binary mixtures containing various ionic liquid and erythromycin were studied. The solubility of erythromycin in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, or 1-decyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, or trihexiltertadecilphosphonium chloride, or butyltrimethylammonium bis(trifluoromethylsulfonyl)imide, or methyltrioctylammonium bis(trifluoromethylsulfonyl)imide, or 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)imide has been measured by a dynamic method, in a wide range of temperatures from (284 to 358) K, at atmospheric pressure. The activity coefficients of erythromycin in ionic liquids were calculated and their comparison with ideal solution was discussed. The experimental data were correlated successfully by means of the semi-empirical Grant equation.     

Physical and electrochemical properties of low-viscosity phosphonium ionic liquids as potential electrolytes

A new group of room temperature ionic liquids based on triethylalkylphosphonium cations together with a bis(trifluoromethylsulfonyl)imide anion as a novel electrolyte is presented in this report. It was found that phosphonium ionic liquids showed lower viscosities and higher conductivities than those of the corresponding ammonium ionic liquids. Particularly, phosphonium ionic liquids containing a methoxy group, triethyl(methoxymethyl)phosphonium bis(trifluoromethylsulfonyl)imide and triethyl(2-methoxyethyl)phosphonium bis(trifluoromethylsulfonyl)imide, exhibited quite low viscosities (35 and 44 mPa s at 25 °C, respectively). Linear sweep voltammetry measured in neat phosphonium ionic liquids at a glassy carbon electrode indicated wide potential windows (at least −3.0 to +2.3 V vs. Fc/Fc⁺). Thermogravimetric analysis suggested that phosphonium ionic liquids were thermally stable up to nearly 400 °C, showing slower gravimetric decreases at high temperature compared to those of the corresponding ammonium ionic liquids.     

Thermophysical properties of pure and water-saturated tetradecyltrihexylphosphonium-based ionic liquids

In this work, the solubility of water in several tetradecyltrihexylphosphonium-based ionic liquids at 298.15 K, and densities and viscosities of both pure and water-saturated ionic liquids in a broad temperature range were measured. The selected ionic liquids comprise the common tetradecyltrihexylphosphonium cation combined with the following anions: bromide, chloride, bis(trifluoromethylsulfonyl)imide, decanoate, methanesulfonate, dicyanamide and bis(2,4,4-trimethylpentyl)phosphinate. The isobaric thermal expansion coefficients for pure and water-saturated ionic liquids were determined based on the density dependence with temperature. Taking into account that the excess molar volumes of the current hydrophobic water-saturated ionic liquids are negligible, the solubility of water was additionally estimated from the gathered density data and compared with the experimental solubilities obtained. Moreover, the experimental densities were compared with those predicted by the Gardas and Coutinho model while viscosity data were correlated using the Vogel–Tammann–Fulcher method.     

Liquid–liquid miscibility and volumetric properties of aqueous solutions of ionic liquids as a function of temperature

The volumetric properties of seven {water + ionic liquid} binary mixtures have been studied as a function of temperature from (293 to 343) K. The phase behaviour of the systems was first investigated using a nephelometric method and excess molar volumes were calculated from densities measured using an Anton Paar densimeter and fitted using a Redlich–Kister type equation. Two ionic liquids fully miscible with water (1-butyl-3-methylimidazolium tetrafluoroborate ([C₁C₄Im][BF₄]) and 1-ethyl-3-methylimidazolium ethylsulfate ([C₁C₂Im][EtSO₄])) and five ionic liquids only partially miscible with water (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₂Im][NTf₂]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₄Im][NTf₂]), 1-butyl-3-methylimidazolium hexafluorophosphate ([C₁C₄Im][PF₆]), 1-butyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C₁C₄Pyrro][NTf₂]), and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide ([N₄₁₁₁][NTf₂])) were chosen. Small excess volumes (less than 0.5 cm³ · mol^?1 at 298 K) are obtained compared with the molar volumes of the pure components (less than 0.3% of the molar volume of the pure ionic liquid). For all the considered systems, except for {[C₁C₂Im][EtSO₄] + water}, positive excess molar volumes were calculated. Finally, an increase of the non-ideality character is observed for all the systems as temperature increases.     

Measurement of vapor–liquid equilibria (VLE) and excess enthalpies (H) of binary systems with 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and prediction of these properties and γ using modified UNIFAC (Dortmund)

Vapor–liquid equilibria (VLE) and excess enthalpies (H^E) were measured for a variety of alkanes, alkenes, aromatics, alcohols, ketones and water in several ionic liquids, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM]⁺[BTI]⁻, 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide [BMIM]⁺[BTI]⁻, 1-hexyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide [HMIM]⁺[BTI]⁻ and 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide [OMIM]⁺[BTI]⁻, covering the temperature range from 323.15 to 413.15 K. The new data were used together with the already available experimental data for imidazolium compounds to fit the required group interaction parameters for modified UNIFAC (Dortmund). The results show that in the future modified UNIFAC (Dortmund) can be applied successfully also for systems with ionic liquids.     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

Effect of Ionic Liquid Structure on the Electrochemical Response of Dopamine at Room Temperature Ionic Liquid‐modified Carbon Paste Electrodes (IL–CPE)

In this work 12 different ionic liquids (ILs) have been used added as co‐binders in the preparation of modified carbon paste electrodes (IL–CPEs) used for the voltammetric analysis of dopamine in Britton‐Robinson buffer. The ionic liquids studied were selected based on three main criteria: (1) increasing chain length of alkyl substituents (studying 1‐ethylimidazolium and ethyl, propyl, butyl, hexyl and decylmethylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids); (2) nature of the counter ion (dicyanamide, bis(trifluoromethylsulfonyl)imide and hexafluorophosphate) in 1‐butyl‐3‐methylimidazolium ionic liquids; and (3) cation ring structures (1‐butyl‐3‐methylimidazolium, 1‐butyl‐1‐methylpiperidinium, 1‐butyl‐1‐methylpyrrolidinium and 1‐butyl‐3‐methylpyridinium) in bis(trifluoromethylsulfonyl)imide or hexafluorophosphate (1‐butyl‐3‐methylimidazolium or 1‐butyl‐3‐methylpyridinium as cations) ionic liquids. The use of IL as co‐binders in IL–CPE results in a general enhancement of both the sensitivity and the reversibility of dopamine oxidation. In square wave voltammetry experiments, the peak current increased up to a 400 % when 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide was used as co‐binder, as compared to the response found with the unmodified CPE. Experimental data provide evidence that electrostatic and steric effects are the most important ones vis‐à‐vis these electrocatalytic effects on the anodic oxidation of dopamine on IL–CPE. The relative hydrophilicity of dicyanamide anions reduced the electrocatalytic effects of the corresponding ionic liquids, while the use of 1‐ethyl‐3‐methylimidazolium hexafluorophosphate or 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (two relatively small and highly hydrophobic ionic liquids) as co‐binders in IL–CPE resulted in the highest electrocatalytic activity among all of the IL–CPE studied.     

Physical properties of ionic liquids consisting of the 1-butyl-3-methylimidazolium cation with various anions and the bis(trifluoromethylsulfonyl)imide anion with various cations

Physical properties of 4 room-temperature ionic liquids consisting of the 1-butyl-3-methylimidazolium cation with various perfluorinated anions and the bis(trifluoromethylsulfonyl)imide (Tf2N-) anion with 12 pyrrolidinium-, ammonium-, and hydroxyl-containing cations are reported. Electronic structure methods are used to calculate properties related to the size, shape, and dipole moment of individual ions. Experimental measurements of phase-transition temperatures, densities, refractive indices, surface tensions, solvatochromic polarities based on absorption of Nile Red, 19F chemical shifts of the Tf2N- anion, temperature-dependent viscosities, conductivities, and cation diffusion coefficients are reported. Correlations among the measured quantities as well as the use of surface tension and molar volume for estimating Hildebrand solubility parameters of ionic liquids are also discussed.     

Ultrafast dynamics of pyrrolidinium cation ionic liquids

We have investigated the ultrafast molecular dynamics of five pyrrolidinium cation room temperature ionic liquids using femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy. The ionic liquids studied are N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide P14+/NTf2-), N-methoxyethyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide P1EOE+/NTf2-), N-ethoxyethyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide P1EOE+/NTf2-), N-ethoxyethyl-N-methylpyrrolidinium bromide P1EOE+, and N-ethoxyethyl-N-methylpyrrolidinium dicyanoamide P1EOE+/DCA-). For comparing dynamics among the five ionic liquids, we categorize the ionic liquids into two groups. One group of liquids comprises the three pyrrolidinium cations P14+, P1EOM+, and P1EOE+ paired with the NTf2- anion. The other group of liquids consists of the P1EOE+ cation paired with each of the three anions NTf2-, Br-, and DCA-. The overdamped relaxation for time scales longer than 2 ps has been fit by a triexponential function for each of the five pyrrolidinium ionic liquids. The fast ( approximately 2 ps) and intermediate (approximately 20 ps) relaxation time constants vary little among these five ionic liquids. However, the slow relaxation time constant correlates with the viscosity. Thus, the Kerr spectra in the range from 0 to 750 cm(-1) are quite similar for the group of three pyrrolidinium ionic liquids paired with the NTf2- anion. The intermolecular vibrational line shapes between 0 and 150 cm(-1) are fit to a multimode Brownian oscillator model; adequate fits required at least three modes to be included in the line shape.     

Experimental vapor pressures of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imides and a correlation scheme for estimation of vaporization enthalpies of ionic liquids

Vapor pressures for a series of 1-n-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (alkyl = ethyl, butyl, hexyl, and octyl) ionic liquids (ILs) were measured by the integral effusion Knudsen method. Thermodynamic parameters of vaporization for ILs were calculated from these data. The absence of decomposition of ILs during the vaporization process was proved by IR spectroscopy. Enthalpies of vaporization of ILs were correlated with molar volumes and surface tensions of the compounds.     

Infinite Dilution Activity Coefficients and Gas-to-Liquid Partition Coefficients of Organic Solutes Dissolved in 1-Benzylpyridinium Bis(Trifluoromethylsulfonyl)Imide and 1-Cyclohexylmethyl-1-Methylpyrrolidinium Bis(Trifluoromethylsulfonyl)Imide

Infinite dilution activity coefficients and gas-to-ionic liquid partition coefficients were measured for a chemically diverse set of 48 or more organic solute probes dissolved in the ionic liquids 1-benzylpyridinium bis(trifluoromethylsulfonyl)imide ([BzPy][Tf₂N]) and 1-cyclohexylmethyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([ChxmPyrr][Tf₂N]) in the temperature range from 323.15 to 373.15 K using inverse gas chromatography. Selectivities and capacities for different separation problems were calculated from the measured chromatographic data. The measured partition coefficients were correlated using mathematical equations based on the Abraham general solvation parameter model. The derived Abraham model correlations back-calculated the observed partition coefficients to within 0.12 log₁₀ units.     

Torsional Dynamics of Thioflavin T in Room‐Temperature Ionic Liquids: An Effect of Heterogeneity of the Medium

The ultrafast excited‐state dynamics of a fibril binding dye, thioflavin T (ThT), has been studied in two room‐temperature ionic liquids (RTILs): 1‐Butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide and methyltrioctylammonium bis(trifluoromethylsulfonyl)imide. Previously, in most studies, it was observed that the excited‐state dynamics of the ThT dye were dependent on the viscosity of the medium. In our study, by using RTILs, we have demonstrated that the excited‐state dynamics of ThT are not only viscosity dependent, but also dependent on the heterogeneous nature of the medium. The effect of structural heterogeneity present in neat RTILs on the excited‐state dynamics of ThT was observed. For both RTILs, excitation wavelength dependency on the emission properties of ThT was observed.     

Physicochemical Study of n-Ethylpyridinium bis(trifluoromethylsulfonyl)imide Ionic Liquid

In this work, thermophysical properties of n-ethylpyridinium bis(trifluoromethylsulfonyl)imide have been studied at atmospheric pressure in the temperature range 288.15–338.15 K. Density, speed of sound, refractive index, surface tension, isobaric molar heat capacity, electrical conductivity and kinematic viscosity have been measured; from these data the isobaric expansibility, isentropic compressibility, molar refraction, entropy and enthalpy of surface formation per unit of surface area, and dynamic viscosity have been calculated. Moreover, we have characterized the thermal behavior of the compound. Results have been analyzed paying special attention to the structural and energetic factors. The magnitude and directionality of the cation–anion interactions have been studied using ab initio quantum calculations, which allow a better understanding of the physicochemical behavior of the ionic liquid. Finally, density values and radial distribution functions were also estimated ab initio from classical molecular dynamics simulations, providing acceptable density predictions.     

Thermal Analysis of Binary Mixtures of Imidazolium,Pyridinium, Pyrrolidinium,and Piperidinium Ionic Liquids

Ionic liquids (ILs) are being widely studied due to their unique properties, which make them potential candidates for conventional solvents. To study whether binary mixtures of pure ionic liquids provide a viable alternative to pure ionic liquids for different applications, in this work, the thermal analysis and molar heat capacities of five equimolar binary mixtures of ionic liquids based on imidazolium, pyridinium, pyrrolidinium, and piperidinium cations with dicyanamide, trifluoromethanesulfonate, and bis(trifluoromethylsulfonyl)imide anions have been performed. Furthermore, two pure ionic liquids based on piperidinium cation have been thermally characterized and the heat capacity of one of them has been measured. The determination and evaluation of both the transition temperatures and the molar heat capacities was carried out using differential scanning calorimetry (DSC). It was observed that the thermal behavior of the mixtures was completely different than the thermal behavior of the pure ionic liquids present, while the molar heat capacities of the binary mixtures were very similar to the value of the average of molar heat capacities of the two pure ionic liquids.     

Comparison of dansylated aminopropyl controlled pore glass solvated by molecular and ionic liquids

We compare how (i) four ionic liquids (ILs) (1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C4mim][Tf2N]), 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpy][Tf2N]), and trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide ([P(C6)3C14][Tf2N])) and (ii) two conventional molecular liquids (methanol and 1-octanol) solvate/wet luminescent organic moieties that are covalently attached to the surface of silica controlled pore glass (CPG). A series of aminopropyl CPG particles that have been covalently tagged with the solvatochromic fluorescent probe group dansyl were used in this study. The results demonstrate that ILs solvate/wet the silica surface differently in comparison to molecular liquids (MLs). Specifically, when comparing ILs and MLs that appear to solvate the free probe, dansylpropylsulfonamide (DPSA), equally in solution, we find that ILs do not solvate/wet the silica surfaces as well as the corresponding MLs. The cation component in these ILs is the significant factor in how the ILs solvate/wet silica surfaces. Solvation/wetting of surface-bound species at a silica surface depends on the cation size. Chlorosilane end-capping of the surface silanol and amine residues attenuates the cation's affects.