Formation of colloidal silver in the presence of a nonionic surfactant,Surfynol 465

The formation of colloidal silver in the presence of a nonionic surfactant, Surfynol 465, was studied at various temperatures. By simply mixing equal volumes of AgClO₄ aq. (1–10 mmol kg^–1) and Surfynol 465 aq., the colloidal silver was formed. The colloidal solution had well over ten times the amount of fine silver particles in the solution formed by the ordinary methods. The first factor to form the colloidal silver without aggregation was the molar ratio of Surfynol 465 to AgClO₄, and the optimum ratio increased with increasing the concentration of AgClO₄ or the temperature. In the fraction of colloidal silver collected through the gel filtration, Surfynol 465 was also found in the micellar state. From these results, it was suggested that Surfynol 465 was a protecting agent of colloidal silver as well as a reducing agent of AgClO₄ in the similar manner to the case of colloidal gold.     

Resonance-enhanced Raman scattering by aggregated 2,2′-cyanine on colloidal silver

The Raman scattering spectrum of 2,2′-cyanine on colloidal silver metal particles is discussed. Preliminary assignments of some of the vibrational Raman bands to the motions of specific chromophoric units are presented and multiplet character of some bands is discussed. Enhanced Raman scattering of 2,2′-cyanine occurs when the laser radiation is tuned to the J-aggregate absorption feature at 575 nm. The enhancement in Raman intensity is the result of a diminution of fluorescence intensity, as well as a quantitative increase in Raman scattering intensity, and is distinct from other types of enhancement phenomena (e.g., resonance Raman of monomeric solution dye, and surface-enhanced Raman scattering (SERS)). The resonance Raman enhancement, due to excitation at the frequency corresponding to the J-aggregate absorption, is found to be 2 × 10⁺³.     

Assessment of silver and gold substrates for the detection of amphetamine sulfate by surface enhanced Raman scattering (SERS)

Methods of detection of amphetamine sulfate using surface enhanced Raman scattering (SERS) from colloidal suspensions and vapour deposited films of both silver and gold are compared. Different aggregating agents are required to produce effective SERS from silver and gold colloidal suspensions. Gold colloid and vapour deposited gold films give weaker scattering than the equivalent silver substrates when high concentrations of drug are analysed but they also give lower detection limits, suggesting a smaller surface enhancement but stronger surface adsorption. A 10(-5) mol dm(-3) solution (the final concentration after addition of colloid was 10(-6) mol dm(-3)) of amphetamine sulfate was detected from gold colloid with an RSD of 5.4%. 25 microl of the same solution could be detected on a roughened gold film. The intensities of the spectra varied across the film surface resulting in relatively high RSDs. The precision was improved by averaging the scattering from several points on the surface. An attempt to improve the detection limit and precision by concentrating a suspension of gold colloid and amphetamine sulfate in aluminium wells did not give effective quantitation. Thus, positive identification and semi-quantitative estimation of amphetamine sulfate can be made quickly and easily using SERS from suspended gold colloid with the appropriate aggregating agents.     

SERS studies of some α-aminoanthraquinones in silver sol

Surface enhanced Raman scattering (SERS) studies of 1-aminoanthraquinone (AAQ), 1-methylaminoanthraquinone (MAAQ) and 1-propanolaminoanthraquinone (PAAQ) adsorbed on silver colloidal particles have been made. The observed SERS spectra have 8, 8 and 11 new bands for AAQ, MAAQ and PAAQ, respectively. The procedure used to prepare the silver sol has an effect on the quality of the SERS spectra. In all the three samples, the intensity of bands due to carbonyl stretching and ring breathing modes is more pronounced. It is found that there is a downward shift in the frequency of the ring breathing mode in PAAQ due to bulky substitution.     

The solvent trapping or co-adsorbing effect during the self-assembly monolayer studied by surface-enhanced Raman scattering

The possibility of solvent molecules being trapped within the monolayer interior during the self-assembly of 2,5-dimercapto-1,3,4-thiadiazole (DMTD) molecules from alcoholic solution, or co-adsorbing together with the solute molecules onto the silver surface was verified by means of surface-enhanced Raman scattering (SERS). Variations of the relative intensity of the solvent bands to the concentrations of the solution were investigated. To a certain range of the concentration, the smaller the concentration is, the larger the relative intensity of the solvent bands is. A new method for obtaining the SERS spectra of the organic compounds that are insoluble in water was developed in our laboratory, which also provides further evidence for the solvent trapping or co-adsorbing effect.     

Surface-enhanced Raman scattering study of riboflavin on borohydride-reduced silver colloids: Dependence of concentration, halide anions and pH values

The influences of concentration, halide anions and pH on the surface-enhanced Raman scattering (SERS) of riboflavin adsorbed on borohydride-reduced silver colloids were studied. The optimum concentration for the SERS of riboflavin is 10(-6)mol/L while the SERS enhancement varies for different modes. The addition of 0.2mol/L halide (NaCl, NaBr, and NaI) aqueous solutions, leads to a general decrease of the SERS intensity and a change of spectral profile of riboflavin excited at 514.5nm. Riboflavin interacts with the silver surface possibly through the CO and N-H modes of the uracil ring. The SERS spectra of riboflavin were recorded in the 3.4-11.6 pH range. By analyzing several SERS marker bands, the protonated, deprotonated or the coexistence of both molecular species adsorbed on the colloidal silver particles was proved.     

Preparation of sterically stabilized gold nanoparticles for plasmonic applications

Plasmonic nanoparticles such as those of gold or silver have been recently investigated as a possible way to improve light absorption in thin film solar cells. Here, a simple method for the preparation of spherical plasmonic gold nanoparticles in the form of a colloidal solution is presented. The nanoparticle diameter is controlled in the range from several nm to tens of nm depending on the synthesis parameters with the size dispersion down to 14 %. The synthesis is based on thermal decomposition and reduction of the chloroauric acid in the presence of a stabilizing capping agent (surfactant) that is very slowly injected into the hot solvent. The surfactant prevents uncontrolled nanoparticle aggregation during the growth process. The nanoparticle size and shape depend on the type of the stabilizing agent. Surfactants with different lengths of the hydrocarbon chains such as Z-octa-9-decenylamine (oleylamine) with AgNO₃ and polyvinylpyrrolidone with AgNO₃ were used for the steric stabilization. Hydrodynamic diameter of the gold nanoparticles in the colloidal solution was determined by dynamic light scattering while the size of the nanoparticle metallic core was found by small-angle X-ray scattering. The UV-VIS-NIR spectrophotometer measurements revealed a plasmon resonance absorption in the 500–600 nm range. Self-assembled nanoparticle arrays on a silicon substrate were prepared by drop casting followed by spontaneous evaporation of the solvent and by a modified Langmuir-Blodgett deposition. The degree of perfection of the self-assembled arrays was analyzed by scanning electron microscopy and grazing-incidence small-angle X-ray scattering. Homogeneous close-packed hexagonal ordering of the nanoparticles stretching over large areas was evidenced. These results document the viability of the proposed nanoparticle synthesis for the preparation of high-quality plasmonic templates for thin film solar cells with enhanced power conversion efficiency, surface enhanced Raman scattering, and other applications.     

Self-limiting aggregation leads to long-lived metastable clusters in colloidal solutions

The existence of a metastable state with limited Coulomb-blocked aggregation at the onset of instability in a colloidal solution is proposed and demonstrated both experimentally and theoretically (through Monte Carlo simulations). Such a stable state of small clusters of metallic colloids happens to be extremely important for techniques such as surface-enhanced Raman scattering (SERS), which profits explicitly from collective plasmon resonances in these clusters to boost Raman signals of specific analytes. In fact, SERS provides a unique tool to understand, monitor, and study the onset of aggregation in colloidal silver/gold and to prove the existence of the proposed state at the boundary of colloid coalescence.     

Concentration-dependent surface-enhanced Raman scattering of 2-benzoylpyridine adsorbed on colloidal silver particles

Surface-enhanced Raman scattering (SERS) of 2-benzoylpyridine (2-BP) adsorbed on silver hydrosols has been investigated. It has been observed that with a small change in the adsorbate concentration, the SER spectra of 2-BP show significant change in their features, indicating different orientational changes of the different part of the flexible molecule on the colloidal silver surface with adsorbate concentration. The time dependence of the SER spectra of the molecule has been explained in terms of aggregation of colloidal silver particles and co-adsorption and replacement kinetics of the adsorbed solute and solvent molecules on the silver surface. The broad long-wavelength band in the absorption spectra of the silver sol due to solute-induced coagulation of colloidal silver particles is found to be red-shifted with the increase in adsorbate concentration. The surface-enhanced Raman excitation profiles indicate that the resonance of the Raman excitation radiation with the new aggregation band contributes more to the SERS intensity than that with the original sol band.     

Surface-enhanced Raman scattering of single-walled carbon nanotubes on silver-coated and gold-coated filter paper

Surface-enhanced Raman scattering (SERS) spectra of single-walled carbon nanotubes (SWCNTs) on metal-coated filter paper are reported for the first time. Experimental results show that the metal-coated filter paper is very effective and active. The SERS spectrum not only shows that all Raman bands of SWCNTs in normal Raman scattering have been generally enhanced, but also shows many new bands, which characterize the structure of SWCNTs and the interaction between SWCNTs and silver/gold nanoparticles, arising from symmetry lowering and selection rule relaxing of SWCNTs induced by the silver/gold surface. In our case, it is difficult to separate the contributions of the electromagnetic and chemical mechanisms to the great enhancement of the Raman signal. The analysis shows that the SERS spectra of SWCNTs on the metal-coated filter paper provide convenience for probing the sample molecules with fine structures related to defects of SWCNTs, the diameter of SWCNTs, and the SERS mechanism of SWCNTs deposited on metal-coated filter paper. Moreover, this can be used as a probe technique for monitoring the synthesis quality of SWCNTs with significant higher sensitivity than other methods, which has promise of being a new technique for monitoring synthesis quality of SWCNTs.     

Vibrational spectra of isomeric pyridinic carboxylic acids in solid state and in solution and their SERS studies in silver sol

Raman spectroscopic studies of three isomeric pyridinic carboxylic acids, viz. picolinic, nicotinic and iso-nicotinic acid in solid state, in aqueous solution and in silver hydrosol, in the frequency range 900–1750 cm⁻¹, have been made. Assignments of the observed bands have been proposed in relation to the molecular forms present in solid state and in solution. Different degrees of intensity enhancements of the Raman bands in surface-enhanced Raman scattering (SERS) have been observed in all the three isomeric molecules. In iso-nicotinic acid, the intensity enhancement has been found to be minimum. Comparisons of Raman spectra in aqueous solution with those due to SERS in silver sol indicate that picolinic and nicotinic acid adsorb perpendicularly to the sol surface whereas in iso-nicotinic acid it occurs via donation of a π-electron of the aromatic ring, i.e. the plane of the ring lies parallel to the surface of the sol.     

Surface-enhanced Raman scattering: realization of localized surface plasmon resonance using unique substrates and methods

Surface-enhanced Raman scattering (SERS) enhancement and the reproducibility of the SERS signal strongly reflect the quality and nature of the SERS substrates because of diverse localized surface plasmon resonance (LSPR) excitations excited at interstitials or sharp edges. LSPR excitations are the most important ingredients for achieving huge enhancements in the SERS process. In this report, we introduce several gold and silver nanoparticle-based SERS-active substrates developed solely by us and use these substrates to investigate the influence of LSPR excitations on SERS. SERS-active gold substrates were fabricated by immobilizing colloidal gold nanoparticles on glass slides without using any surfactants or electrolytes, whereas most of the SERS-active substrates that use colloidal gold/silver nanoparticles are not free of surfactant. Isolated aggregates, chain-like elongated aggregates and two-dimensional (2D) nanostructures were found to consist mostly of monolayers rather than agglomerations. With reference to correlated LSPR and SERS, combined experiments were carried out on a single platform at the same spatial position. The isolated aggregates mostly show a broadened and shifted SPR peak, whereas a weak blue-shifted peak is observed near 430 nm in addition to broadened peaks centered at 635 and 720 nm in the red spectral region in the chain-like elongated aggregates. In the case of 2D nanostructures, several SPR peaks are observed in diverse frequency regions. The characteristics of LSPR and SERS for the same gold nanoaggregates lead to a good correlation between SPR and SERS images. The elongated gold nanostructures show a higher enhancement of the Raman signal than the the isolated and 2D samples. In the case of SERS-active silver substrates for protein detection, a new approach has been adopted, in contrast to the conventional fabrication method. Colloidal silver nanoparticles are immobilized on the protein functionalized glass slides, and further SERS measurements are carried out based on LSPR excitations. A new strategy for the detection of biomolecules, particularly glutathione, under aqueous conditions is proposed. Finally, supramolecular J-aggregates of ionic dyes incorporated with silver colloidal aggregates are characterized by SERS measurements and correlated to finite-difference time-domain analysis with reference to LSPR excitations. Figure SPR and SERS images for isolated, elongated and two-dimensional gold nanostructures     

Raman spectra of pyridine adsorbed on a copper electrode

The surface enhanced Raman scattering (SERS) of pyridine adsorbed on a copper electrode was observed with 647.1 nm excitation and the dependence of the Raman intensity as a function of electrode potential was obtained for the most intense bands. The results are compared with reported intensity and frequency values for the silver/pyridine system.     

Photochemical formation of silver-gold (Ag?Au) composite colloids in solutions containing sodium alginate

Photochemical formation of colloidal silver, colloidal gold and silver-gold (Ag-Au) composite colloids under mild conditions has been studied. Irradiation of either aqueous AgCIO₄ or HAuCI₄ solution in the presence of sodium alginate (SA) with 253.7 nm light yielded colloidal silver or gold, whose particle diamter was 10-30 nm or 40-60 nm, respectively. The Ag-Au composite colloids consisting of mixtures of silver and gold domains (particle diameter 30-150 nm) have been prepared and their extinction spectra have been examined on the basis of a conventional Mie theory in combination with an effective medium theory to estimate the optical constants of these colloids. It has been shown that the extinction spectra of the Ag-Au composite colloids are completely different from those of Ag-Au alloy colloids, in that the former have two extinction maxima close to the colloidal extinction bands of pure silver and gold, in contrast to a single extinction maximum of the latter. The importance of natural, high-molecular carboxylic acids such as alginic acid in the photochemical formation of metal colloids and thin films has been stressed.     

A Study of Relationship Between Universality in Fractal Colloids Aggregation and Time-dependent SERS

The relationship between the rule of time-dependent surface-enhanced Raman scattering (SERS) intensity of adsorbed pyridine in AgBr sol and silver bromide colloidal fractal aggregation is studied in this paper. The experimental results support the view of universality in colloidal aggregation and suggest that SERS may be a useful tool in the study of kinetics of colloidal aggregation.     

A linear dichroism study of colloidal silver in stretched polymer films

The visible absorption spectrum of silver colloids incorporated in poly vinyl alcohol films has been resolved into five Gaussian bands of different polarization. The energy positions and relative intensities of the bands can be explained using an exciton model in which dipole-dipole coupling occurs between silver particles in a linear chain arrangement. An important conclusion that stems from the analysis is that surface-enhanced Raman scattering occurs only when the exciting light is polarized parallel to the main axis of the linear chain colloidal aggregate.     

Amplified light scattering and emission of silver and silver core-silica shell particles

Side versus forward light scattergrams, and fluorescence (488 nm excitation) intensity versus particle count histograms were gathered for bare, R6G-coated, and silica-R6G-coated silver particles of 150-200 nm diameter, one-by-one by flow cytometry. Fluorescence emission intensity of the composite particles monotonically increased and then reached a plateau with greater R6G concentrations, as measured by flow cytometry. Fluorescence amplification factors of up to 3.5x10(3) were estimated by reference to measurements on core-shell particles with silica instead of silver cores. Huge surface enhanced Raman scattering (SERS) intensities, at least 10(14)-fold greater than normal Raman scattering intensities, were observed with 633 nm excitation for molecules such as rhodamine 6G (R6G) on the same single particles of silver. Although routine transmission (TEM) and scanning (SEM) electron microscopies showed gross structures of the bare and coated particles, high-resolution field emission scanning electron microscopy (FE-SEM), revealed Brownian roughness describing quantum size and larger structures on the surface of primary colloidal silver particles. These silver particles were further characterized by extinction spectra and zeta potentials. Structural and light scattering observations that are reported herein were used to tentatively propose a new hierarchical model for the mechanism of SERS.     

pH-Dependent Surface-Enhanced Raman Scattering of 8-Hydroxy Quinoline Adsorbed on Silver Hydrosol

Surface-enhanced Raman scattering (SERS) of 8-hydroxy quinoline (HQ) adsorbed on silver hydrosols are compared with the FTIR and normal Raman spectrum in the bulk and in solution. Definite evidence of the charge transfer interaction to the overall contribution in the SER enhancement has been reported. The excitation profile study also supports the evidence of a charge transfer interaction. The effect of pH variation on the SER band intensity is explained in terms of chemisorption of the molecule on bare and chlorinated silver surfaces. The apparent enhancement factor calculations of the principal Raman bands indicate that in the surface-adsorbed state, an HQ molecule is oriented neither flat nor vertical to the silver surface but is tilted. Copyright 2000 Academic Press.     

Raman spectral study of metal-cytosine complexes: a density functional theoretical (DFT) approach

The fluctuation of surface-enhanced Raman scattering (SERS) spectra has been an obstacle to the analysis of the adsorbate on the metal surface. In this paper, we aim at using the density functional theory (DFT) to study the fluctuant Raman spectra of the cytosine molecule which interacts with a coinage metal atom or cation via N1 and N3 sites. The results show that the adsorption site strongly influences the Raman spectral property of cytosine molecule, especially the relative intensity of some bands. In addition, the SERS spectra of cytosine which is adsorbed on the gold, silver, and copper electrodes are measured, and the possible orientation and adsorption site of the cytosine molecule adsorbed on metal electrodes surface are proposed with the help of DFT simulations.     

Studies on adsorption of 5-amino tetrazole on silver nanoparticles by SERS and DFT calculations

The surface-enhanced Raman scattering (SERS) studies of 5-amino tetrazole (5AT), a tetrazole derivative, in aqueous silver sol at pH approximately 9 and on deposited colloidal silver films were carried out and compared with the normal Raman spectrum of the molecule. The experimentally observed Raman bands along with their corresponding infrared bands were assigned based on the results of density functional theory (DFT) calculations. The significant changes evidenced between the SERS and the normal Raman spectra combined with the theoretical data obtained for Ag-5AT system demonstrated that the molecule is adsorbed on colloidal Ag particles through the lone pair of electrons of the nitrogen atom. The contribution of the chemical mechanism for the SERS enhancement was proved by the behavior of the electronic absorption spectrum of the Ag colloid upon addition of 5AT. This is further supported by the theoretical calculations that show that the favorable interaction of the frontier orbitals localized on Ag(+) and the negatively charged nitrogen from the tetrazole ring leads to the formation of the stable (up to 130 kJ mol(-1)) charge-transfer complex. The orientation of the adsorbed species with respect to the metal surface was also predicted by applying the "surface selection rule". In addition, the feasibility of the formation of the polymeric species has also been discussed.