Hydrogels with Dynamically Controllable Mechanics and Biochemistry for 3D Cell Culture Platforms

Many cell-matrix interaction studies have proved that dynamic changes in the extracellular matrix(ECM)are crucial to maintain cellular properties and behaviors.Thus,developing materials that can recapitulate the dynamic attributes of the ECM is highly desired for threedimensional(3 D)cell culture platforms.To this end,we sought to develop a hydrogel system that would enable dynamic and reversible turning of its mechanical and biochemical properties,thus facilitating the control of cell culture to imitate the natural ECM.Herein,a hydrogel with dynamic mechanics and a biochemistry based on an addition-fragmentation chain transfer(AFCT)reaction was constructed.Thiol-modified hyaluronic acid(HA)and allyl sulfide-modifiedε-poly-L-lysine(EPL)were synthesized to form hydrogels,which were non-swellable and biocompatible.The reversible modulus of the hydrogel was first achieved through the AFCT reaction;the modulus can also be regulated stepwise by changing the dose of UVA irradiation.Dynamic patterning of fluorescent markers in the hydrogel was also realized.Therefore,this dynamically controllable hydrogel has great potential as a 3 D cell culture platform for tissue engineering applications.     

Chitosan-based self-healing hydrogel for bioapplications

A chitosan-based biocompatible self-healing hydrogel has been facilely prepared and used for bioapplications.     

Alginate/Polyoxyethylene and Alginate/Gelatin Hydrogels: Preparation,Characterization, and Application in Tissue Engineering

Hydrogels are attractive biomaterials for three-dimensional cell culture and tissue engineering applications. The preparation of hydrogels using alginate and gelatin provides cross-linked hydrophilic polymers that can swell but do not dissolve in water. In this work, we first reinforced pure alginate by using polyoxyethylene as a supporting material. In an alginate/PEO sample that contains 20 % polyoxyethylene, we obtained a stable hydrogel for cell culture experiments. We also prepared a stable alginate/gelatin hydrogel by cross-linking a periodate-oxidized alginate with another functional component such as gelatin. The hydrogels were found to have a high fluid uptake. In this work, preparation, characterization, swelling, and surface properties of these scaffold materials were described. Lyophilized scaffolds obtained from hydrogels were used for cell viability experiments, and the results were presented in detail.     

Phospholipid Polymer Hydrogel Matrices with Dually Immobilized Cytokines for Accelerating Secretion of the Extracellular Matrix by Encapsulated Cells

Construction of 3D tissues by various types of cells with specific characteristics is an important and fundamental technology in tissue reconstruction medicine and animal‐free diagnosis system. To do so, an excellent extracellular matrix (ECM) is needed for encapsulation of cells and maintaining cell activity. Spontaneously forming hydrogel matrix is used by complexation between two water‐soluble polymers, 2‐methacryloyloxyethyl phosphorylcholine polymer bearing phenylboronic acid groups and poly(vinyl alcohol). Two cytokines for cell proliferation are immobilized in the hydrogel matrix to control the activities of the encapsulated cells. The cytokine‐immobilized hydrogel matrix can encapsulate both L929 fibroblasts and normal human dermal fibroblasts under mild condition. The physical properties of the hydrogel matrix can follow the proliferation process of the encapsulated cells. The encapsulated cells secrete ECM in the polymer hydrogel networks upon 3D culturing for 7 days. Consequently, the tissue‐mimicking ECM hybrid hydrogels are fabricated successfully.     

由D型氨基酸设计自组装短肽D-EAK16构建新型三维纳米纤维支架材料

采用D型氨基酸设计自组装短肽D-EAK16, 运用圆二色仪及原子力显微镜等仪器和细胞三维培养, 发现短肽D-EAK16在30 ℃时具有稳定的二级结构β-sheet, 在一定浓度下D-EAK16可形成由纳米纤维构成的透明水凝胶, 含水量高达99％, 可在细胞培养基(如PBS, DMEM)中形成支架. 细胞三维培养显示, 该水凝胶对细胞HO-8910和SPC-A-1的生长未见毒性. 比较D型氨基酸纳米支架和L型氨基酸纳米支架, 细胞的毒性未发现显著性差异. 采用D型氨基酸构建的自组装短肽, 可提供一个三维基质培养系统, 期望能广泛应用于生物医学工程等领域.     

Biomimetic double network hydrogels: Combining dynamic and static crosslinks to enable biofabrication and control cell-matrix interactions

Hydrogels are promising candidates for recapitulation of the native extracellular matrix (ECM), yet recreating molecular and spatiotemporal complexity within a single network remains a challenge. Double network (DN) hydrogels are a promising step towards recapitulating the multicomponent ECM and have enhanced mechanical properties. Here, we investigate DNs based on dynamic covalent and covalent bonds to mimic the dynamicity of the ECM and enable biofabrication. We also investigate the spatiotemporal molecular attachment of a bioactive adhesive peptide within the networks. Using oxidized alginate (dynamic network, Schiff base) and polyethylene glycol diacrylate (static network, acrylate polymerization) we find an optimized procedure, where the dynamic network is formed first, followed by the static network. This initial dynamically cross-linked hydrogel imparts self-healing, injectability, and 3D printability, while the subsequent DN hydrogel improves the stability of the 3D gels and imparts toughness. Rheology and compression testing show that the toughening is due to the combination of energy dissipation (dynamic network) and elasticity (static network). Furthermore, where we place adhesive sites in the network matters; we find distinct differences when an adhesive peptide, Arg-Gly-Asp (RGD), is attached to the different networks. This DN strategy bring us closer to understanding and recreating the complex multicomponent ECM—pushing us past a materials view of cell adhesion—while enabling injectabiltiy and printing of tough hydrogels.     

Cellulose-based hydrogels with excellent microstructural replication ability and cytocompatibility for microfluidic devices

In the face of challenges in the development of excellent biocompatible materials for microfluidic device fabrication, we demonstrated that cross-linked cellulose (RCC) hydrogel can be used as the bulk material for microchips. The cellulose hydrogel was prepared from cellulose solution dissolved in an 8 wt% LiOH/15 wt% urea aqueous system with cooling by crosslinking with epichlorohydrin. Collagen as a key extracellular matrix component for promoting cell cultivation was cross-linked in the cellulose hydrogel to obtain cellulose–collagen (RCC/C) hybrid hydrogels. The experimental results revealed that cellulose-based hydrogel microchips with well-defined 2D or 3D microstructures possessed excellent structural replication ability, good mechanical properties, and cytocompatibility for cell culture as well as excellent dimensional stability at elevated temperature. The hydrogel, as a transparent microchip material, had no effect on the fluorescence behaviors of FITC-dextran and rhodamine-dextran, leading to the good conjunction with fluorescent detection and imaging. Moreover, collagen could be immobilized in the RCC/C hydrogel scaffold for promoting cell growth and generating stable chemical concentration gradients, leading to superior cytocompatibility. This work provides new hydrogel materials for the microfluidic technology field and mimicks a 3D cell culture microenvironment for cell-based tissue engineering and drug screening.     

Mammalian Cell Spheroids on Mixed Organic–Inorganic Superhydrophobic Coating

Three-dimensional cell culture has become a reliable method for reproducing in vitro cellular growth in more realistic physiological conditions. The surface hydrophobicity strongly influences the promotion of cell aggregate formation. In particular, for spheroid formation, highly water-repellent coatings seem to be required for the significant effects of the process. In this work, surfaces at different wettability have been compared to observe their influence on the growth and promotion of aggregates of representative mammalian cell lines, both tumoral and non-tumoral (3T3, HaCat and MCF-7 cell lines). The effect of increased hydrophobicity from TCPS to agarose hydrogel to mixed organic–inorganic superhydrophobic (SH) coating has been investigated by optical and fluorescence microscopy, and by 3D confocal profilometry, in a time scale of 24 h. The results show the role of less wettable substrates in inducing the formation of spheroid-like cell aggregates at a higher degree of sphericity for the studied cell lines.     

Fabricating gradient hydrogel scaffolds for 3D cell culture

Optimizing cell-material interactions is critical for maximizing regeneration in tissue engineering. Combinatorial and high-throughput (CHT) methods can be used to systematically screen tissue scaffolds to identify optimal biomaterial properties. Previous CHT platforms in tissue engineering have involved a two-dimensional (2D) cell culture format where cells were cultured on material surfaces. However, these platforms are inadequate to predict cellular response in a three-dimensional (3D) tissue scaffold. We have developed a simple CHT platform to screen cell-material interactions in 3D culture format that can be applied to screen hydrogel scaffolds. Herein we provide detailed instructions on a method to prepare gradients in elastic modulus of photopolymerizable hydrogels.     

Diffusion-mediated in situ alginate encapsulation of cell spheroids using microscale concave well and nanoporous membrane

Here, we present a novel and simple process of spheroid formation and in situ encapsulation of the formed spheroid without intervention. A hemispherical polydimethylsiloxane (PDMS) micromold was employed for the formation of uniform sized spheroids and two types of nano-porous membrane were used for the control of the crosslinking agent. We characterized the transport properties of the membrane, and the selection of alginate hydrogel as a function of gelation time, alginate concentration, and membrane type. Using the developed process and micromold, HepG2 cell spheroids were successfully formed and encapsulated in alginate without replating. This method allows spheroid encapsulation with minimal damage to the spheroid while maintaining high cell viability. We demonstrate the feasibility of this method in developing a bio-artificial liver (BAL) chip by evaluating viability and function of encapsulated HepG2 spheroids. This method may be applied to the encapsulation of several aggregating cell types, such as β-cells for islet formation and stem cells for embryonic body preservation, or as a model for tumor cell growth and proliferation in a 3D hydrogel environment.     

Development of 3D Biofabricated Cell Laden Hydrogel Vessels and a Low‐Cost Desktop Printed Perfusion Chamber for In Vitro Vessel Maturation

The vascular system represents the key supply chain for nutrients and oxygen inside the human body. Engineered solutions to produce sophisticated alternatives for autologous or artificial vascular implants to sustainably replace diseased vascular tissue still remain a key challenge in tissue engineering. In this paper, cell‐laden 3D bioplotted hydrogel vessel‐like constructs made from alginate di‐aldehyde (ADA) and gelatin (GEL) are presented. The aim is to increase the mechanical stability of fibroblast‐laden ADA‐GEL vessels, tailoring them for maturation under dynamic cell culture conditions. BaCl₂ is investigated as a crosslinker for the oxidized alginate‐gelatin system. Normal human dermal fibroblast (NHDF)‐laden vessel constructs are optimized successfully in terms of higher stiffness by increasing ADA concentration and using BaCl₂, with no toxic effects observed on NHDF. Contrarily, BaCl₂ crosslinking of ADA‐GEL accelerates cell attachment, viability, and growth from 7d to 24h compared to CaCl₂. Moreover, alignment of cells in the longitudinal direction of the hydrogel vessels when extruding the cell‐laden hydrogel crosslinked with Ba²⁺ is observed. It is possible to tune the stiffness of ADA‐GEL by utilizing Ba²⁺ as crosslinker. In addition, a customized, low‐cost 3D printed polycarbonate (PC) perfusion chamber for perfusion of vessel‐like constructs is introduced.     

Microfluidic hydrogel layers with multiple gradients to stimulate and perfuse three-dimensional neuronal cell cultures

We present a simple and easy to handle PDMS microfluidic device for neuronal cell culture studies in three-dimensional hydrogel scaffolds. The hydrogel is structured in parallel layers to reconstruct cell layers close to the natural environment. Dissociated cortical neurons of embryonic rats have been cultured in 0.5% w/v agarose including 0.2% w/v alginate. The cells formed neurite networks through neighboring cell free hydrogel layers. The cell culture showed neurite outgrowth in the microfluidic channel over more than seven days in vitro without perfusion. Culturing neurons in hydrogel layers surrounded by a liquid phase containing culture medium resulted in denser neuronal networks.     

Gentle cell trapping and release on a microfluidic chip by in situ alginate hydrogel formation

Microfluidic devices are increasingly used to perform biological experiments on a single-cell basis. However, long-term stability of cell positions is still an issue. A novel biocompatible method for cell entrapment and release on a microchip is presented. It is based on the controlled formation of an alginate hydrogel by bringing two laminar flows of alginate and calcium ions in the range of 2 mM to 40 mM into contact. The resulting growth of a gel bar is used to enclose and immobilize yeast cells. Adding ethylenediaminetetraacetic acid (EDTA) to the alginate solution allows for control of the hydrogel growth, and by varying the ratio of Ca(2+) to EDTA concentrations gel growth or gel shrinkage can be induced at will. Trapped cells are released during shrinkage of the gel. The trapping efficiency for different cell speeds is investigated and the properties of gel growth are discussed using a diffusion model. Precise positioning of a single cell is demonstrated. The technique presented allows not only the reversible immobilization of cells under gentle conditions but also offers the potential of long-term cell cultures as shown by on-chip incubation of yeast cells. The procedure may provide a simple and fully biocompatible technique for a multitude of innovative experiments on cells in microsystems.     

Preparation and characterization of wool fiber reinforced nonwoven alginate hydrogel for wound dressing

Wound healing is a complex process which requires an appropriate environment for quick healing. Recently, biodegradable hydrogel-based wound dressings have been seen to have high potential owing to their biodegradability and hydrated molecular structure. In this work, a novel biodegradable composite of sodium alginate hydrogel with wool needle-punched nonwoven fabric was produced for wound dressing by sol–gel technique. The wool nonwoven was dipped in the sodium alginate-water solution and then soaked in calcium chloride solution which resulted in hydrogel formation. FTIR analysis and SEM images confirm the presence of alginate hydrogel inside the needle-punched wool nonwoven fabric. The wound exudate absorbing capacity of hydrogel based wool nonwoven was increased 30 times as compared to pure wool nonwoven. Moreover, the tensile strength and moisture management properties of hydrogel based nonwoven were also enhanced. The unique combination of alginate hydrogel with biocompatible wool nonwoven fabric provides moist environment and can help in cell proliferation during wound healing process.

     

Polypropylene non-woven supported fibronectin molecular imprinted calcium alginate/polyacrylamide hydrogel film for cell adhesion

Fibronectin (FN) imprinted polypropylene (PP) non-woven supported calcium alginate/polyacrylamide hydrogel film (PP-s-CA/PAM MIP) was prepared using non-woven PP fiber as matrix, FN as template molecule, sodium alginate (SA) and acrylamide (AM) as functional monomers, via UV radiation-reduced polymerization. The PP-s-CA/PAM MIP exhibited an obvious improvement in terms of adsorption capacity for FN compared with non-imprinted polymer (NIP). The PP-s-CA/PAM MIP was successfully used for the culture of mouse fibroblast cells (L929) and the results showed that PP-s-CA/PAM MIP exhibited better cell adherence performance than the NIP did.     

The application of an optically switched dielectrophoretic (ODEP) force for the manipulation and assembly of cell-encapsulating alginate microbeads in a microfluidic perfusion cell culture system for bottom-up tissue engineering

This study reports the utilisation of an optically switched dielectrophoretic (ODEP) force for the manipulation and assembly of cell-encapsulating alginate microbeads in a microfluidic perfusion cell culture system for bottom-up tissue engineering. One of the key features of this system is the ODEP force-based mechanism, which allows a commercial projector to be coupled with a computer to manipulate and assemble cell-encapsulating microbeads in an efficient, manageable, and user-friendly manner. Another distinctive feature is the design of the microfluidic cell culture chip, which allows the patterned cell-encapsulating microbeads to be cultivated on site under culture medium perfusion conditions. For demonstrating its application in bottom-up cartilage tissue engineering, chondrocyte-encapsulating alginate microbeads varying in encapsulated cell densities were generated. The manipulation forces associated with operating the alginate microbeads were experimentally evaluated. The results revealed that the measured manipulation forces increased with increases in both the applied electric voltage and the number of cells in the alginate microbeads. Nevertheless, the observed manipulation force was found to be independent of the size of the cell-free alginate microbeads. It can be speculated that the friction force may influence the estimation of the ODEP force within the experimental conditions investigated. In this study, chondrocyte-encapsulating alginate microbeads with three different cell densities were manipulated and assembled in the proposed microfluidic system to form a compact sheet-like cell culture construct that imitates the cell distribution in the cross-section of native articular cartilage. Moreover, the demonstration case also showed that the cell viability of the cultured cells in the microfluidic system remained as high as 96 ± 2%. In this study, four sheet-like cell culture constructs were stacked to create a larger assembled cell culture construct. The cell distribution inside the cell culture construct was further confirmed by a confocal microscopy observation, which showed that the distribution was similar to that in native articular cartilage. As a whole, the proposed system holds great promise as a platform for engineering tissue constructs with easily tunable inner cell distributions.     

Dynamic Exchange in 3D Cell Culture Hydrogels Based on Crosslinking of Cyclic Thiosulfinates

Dynamic polymer materials are highly valued substrates for 3D cell culture due to their viscoelasticity, a time-dependent mechanical property that can be tuned to resemble the energy dissipation of native tissues. Herein, we report the coupling of a cyclic thiosulfinate, mono-S-oxo-4-methyl asparagusic acid, to a 4-arm PEG-OH to prepare a disulfide-based dynamic covalent hydrogel with the addition of 4-arm PEG-thiol. Ring opening of the cyclic thiosulfinate by nucleophilic substitution results in the rapid formation of a network showing a viscoelastic fluid-like behaviour and relaxation rates modulated by thiol content through thiol-disulfide exchange, whereas its viscoelastic behaviour upon application as a small molecule linear crosslinker is solid-like. Further introduction of 4-arm PEG-vinylsulfone in the network yields a hydrogel with weeks-long cell culture stability, permitting 3D culture of cell types that lack robust proliferation, such as human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs). These cells display native behaviours such as cell elongation and spontaneous beating as a function of the hydrogel's mechanical properties. We demonstrate that the mode of dynamic cyclic thiosulfinate crosslinker presentation within the network can result in different stress relaxation profiles, opening the door to model tissues with disparate mechanics in 3D cell culture.     

Guided three-dimensional growth of functional cardiomyocytes on polyethylene glycol nanostructures

We introduce well-defined nanopillar arrays of a poly(ethylene glycol) (PEG) hydrogel as a cell culture platform to guide a 3D construct of primary rat cardiomyocytes in vitro for potential tissue engineering applications. Ultraviolet (UV)-assisted capillary lithography was used to fabricate highly uniform approximately 150 nm PEG pillars with approximately 400 nm height. It was found that cell adhesion was significantly enhanced on PEG nanopillars (132 +/- 29 cells/mm2) compared to that on the bare PEG control (39 +/- 17 cells/mm2) (p < 0.05) but substantially reduced compared to that on the glass control (502 +/- 45 cells/mm2) (p < 0.01). Furthermore, in colonizing cardiomyocytes, the nanopillars stimulated self-assembled aggregates among the contacting cells with 3D growth, which is a unique feature for nanopatterned PEG hydrogels as a cell culture substrate. The 3D-grown cardiomyocytes retained their conductive and contractile properties, as evidenced by the observation of beating cardiomyocytes with robust action potential generation.     

Gelatin—Hyaluronic Acid Hydrogels with Tuned Stiffness to Counterbalance Cellular Forces and Promote Cell Differentiation

Cells interact mechanically with their environment, exerting mechanical forces that probe the extracellular matrix (ECM). The mechanical properties of the ECM determine cell behavior and control cell differentiation both in 2D and 3D environments. Gelatin (Gel) is a soft hydrogel into which cells can be embedded. This study shows significant 3D Gel shrinking due to the high traction cellular forces exerted by the cells on the matrix, which prevents cell differentiation. To modulate this process, Gel with hyaluronic acid (HA) has been combined in an injectable crosslinked hydrogel with controlled Gel–HA ratio. HA increases matrix stiffness. The addition of small amounts of HA leads to a significant reduction in hydrogel shrinking after cell encapsulation (C2C12 myoblasts). We show that hydrogel stiffness counterbalanced traction forces of cells and this was decisive in promoting cell differentiation and myotube formation of C2C12 encapsulated in the hybrid hydrogels.

     

Gelation Kinetics and Mechanical Properties of Thiol-Tetrazole Methylsulfone Hydrogels Designed for Cell Encapsulation

Hydrogel precursors that crosslink within minutes are essential for the development of cell encapsulation matrices and their implementation in automated systems. Such timescales allow sufficient mixing of cells and hydrogel precursors under low shear forces and the achievement of homogeneous networks and cell distributions in the 3D cell culture. The previous work showed that the thiol-tetrazole methylsulfone (TzMS) reaction crosslinks star-poly(ethylene glycol) (PEG) hydrogels within minutes at around physiological pH and can be accelerated or slowed down with small pH changes. The resulting hydrogels are cytocompatible and stable in cell culture conditions. Here, the gelation kinetics and mechanical properties of PEG-based hydrogels formed by thiol-TzMS crosslinking as a function of buffer, crosslinker structure and degree of TzMS functionality are reported. Crosslinkers of different architecture, length and chemical nature (PEG versus peptide) are tested, and degree of TzMS functionality is modified by inclusion of RGD cell-adhesive ligand, all at concentration ranges typically used in cell culture. These studies corroborate that thiol/PEG-4TzMS hydrogels show gelation times and stiffnesses that are suitable for 3D cell encapsulation and tunable through changes in hydrogel composition. The results of this study guide formulation of encapsulating hydrogels for manual and automated 3D cell culture.