The electron microscopy of thin metal foils

In this article, the nature of the defects in crystal structures and the way in which they can be studied by electron microscopy of thin metal foils are discussed in detail. Examples of phenomena observed in metals with the electron microscope are briefly presented. These include the dislocation structures introduced by work hardening, fatigue, quenching and irradiation; examples of microstructures found in alloys; and magnetic domain walls.     

In situ environmental transmission electron microscopy to determine transformation pathways in supported Ni nanoparticles

We have applied in situ environmental transmission electron microscopy (ETEM) to follow the dynamic phase transformations that take place in SiO(2) supported Ni nanoparticles during oxidation and reduction processes. The gas environments used for in situ ETEM studies were relevant to partial oxidation of methane (POM) reaction. In the presence of the CH(4)+O(2) gas mixture (in 2:1 ratio) at 400°C, Ni transforms to NiO due to the high O-chemisorption energy. NiO void structures were formed during the oxidation because of the Kirkendall type process where diffusion of Ni cations along NiO grain boundaries is eight orders of magnitude greater than the diffusion of O anions. Reduction was performed under a CO+H(2) mixture at 400°C (in 1:2 ratio) and also in the presence of CH(4) at 500°C. Particle reduction processes also takes place via the diffusion of Ni cations along the NiO grain boundaries leaving NiO on the surface of the nanoparticle. NiO is the phase that is present on the surface of the nanoparticle during the intermediate stage of reduction.     

In situ electron microscopy investigations of solid-state synthesis in Al/Au thin bilayer films

In situ transmission electron microscopy investigations of solid-state synthesis in Al/Au thin bilayer films are conducted. The samples are heated in the column of a transmission electron microscope. The heating temperature is changed from room temperature to 300°C with a heating rate of up to 120°C min^?1. It is found that solid-phase synthesis starts at ≈100°C. At 140 ± 5°C, two crystal phases, Al₂Au (Fm3m) and AlAu₂ (I4/mmm), are simultaneously observed, while at 235 ± 5°C and higher (up to 300°C) only Al₂Au phase is detected.     

Video-frequency scanning transmission electron microscopy of moving gold nanoparticles in liquid

Immobilized gold nanoparticles were imaged in a liquid containing water and 50% glycerol with scanning transmission electron microscopy (STEM). The specimen was enclosed in a liquid compartment formed by two silicon microchips with electron transparent windows. A series of images was recorded at video frequency with a spatial resolution of 1.5nm. The nanoparticles detached from their support after imaging them for several seconds at a magnification of 250,000. Their movement was found to be much different than the movement of nanoparticles moving freely in liquid as described by Brownian Motion. The direction of motion was not random-the nanoparticles moved either in a preferred direction, or radially outwards from the center of the image. The displacement of the gold nanoparticles over time was three orders of magnitude smaller than expected on the basis of Brownian Motion. This finding implies that nanoscale objects of flexible structure or freely floating, including nanoparticles and biological objects, can be imaged with nanoscale resolution, as long as they are in close proximity to a solid support structure.     

铜箔上生长的六角氮化硼薄膜的扫描隧道显微镜研究

利用扫描隧道显微镜研究了采用化学气相沉积法在铜箔表面生长出的高质量的六角氮化硼薄膜. 大范围的扫描隧道显微镜图像显示出该薄膜具有原子级平整的表面, 而扫描隧道谱则显示, 扫描隧道显微镜图像反映出的是该薄膜样品的隧穿势垒空间分布. 极低偏压的扫描隧道显微镜图像呈现了氮化硼薄膜表面的六角蜂窝周期性原子排列, 而高偏压的扫描隧道显微镜图像则呈现出无序和有序排列区域共存的电子调制图案. 该调制图案并非源于氮化硼薄膜和铜箔衬底的面内晶格失配, 而极有可能来源于两者界面处的氢、硼和/或氮原子在铜箔表面的吸附所导致的隧穿势垒的局域空间分布.     

Visualizing macromolecular complexes with in situ liquid scanning transmission electron microscopy

A central focus of biological research is understanding the structure/function relationship of macromolecular protein complexes. Yet conventional transmission electron microscopy techniques are limited to static observations. Here we present the first direct images of purified macromolecular protein complexes using in situ liquid scanning transmission electron microscopy. Our results establish the capability of this technique for visualizing the interface between biology and nanotechnology with high fidelity while also probing the interactions of biomolecules within solution. This method represents an important advancement towards allowing future high-resolution observations of biological processes and conformational dynamics in real-time.     

In situ ultra-high vacuum transmission electron microscopy studies of the transient oxidation stage of Cu and Cu alloy thin films

Because environmental stability is an essential property of most engineered materials, many theories exist to explain oxidation mechanisms. Yet, nearly all classical oxidation theories assume a uniform growing film, where structural changes were not considered because of the previous lack of experimental procedure to visualize this non-uniform growth in conditions that allowed for highly controlled surfaces and impurities. With the advent of vacuum technologies and advances in microcopy techniques, especially in situ, one can now see structural changes under controlled surface conditions. Here, we present a review of our systematic studies on the transient oxidation stages of a model metal system, Cu, and its alloys, Cu-Au and Cu-Ni, by in situ ultra-high vacuum transmission electron microscopy (UHV-TEM). The dependence of the oxidation behavior on the crystal orientation, oxygen pressure, temperature and alloying is attributed to the structures of the oxygen-chemisorbed layer, oxygen surface diffusion, surface energy and the interfacial strain energy. Heteroepitaxial concepts, developed to explain thin film formation on a dissimilar substrate material (e.g., Ge on Si), described well these initial oxidation stages.     

Application of aluminum and titanium foils in low-energy wide-aperture electron accelerators

We have reported on the results of theoretical and experimental investigations of characteristics of aluminum and titanium foils used in devices to extract electron beams from wide-aperture low-energy accelerators with a high current density. The mechanical properties of foils at different temperatures and the electron beam transmission and absorption coefficients have been compared. The results of analyzing the dependences of the efficiency of the electron beam extraction from accelerators on the type of the electron–optical system, material, and thickness of the foil for various sizes of extraction windows and the same type of the slot support grids have been presented. We have proposed an analytic model for calculating the temperature of the foil in the unit cell of the support grid. The electron transmittance and absorbance, as well as the temperature regimes of the foils, have been calculated using different methods.     

In situ scanning electron microscopy of graphene growth on polycrystalline Ni substrate

Scanning electron microscopy (SEM) is shown to be capable of imaging a monolayer of graphene, and is employed to observe in situ the graphene growth process by segregation of bulk-dissolved carbon on a polycrystalline nickel surface. Because of a wide field of view, SEM could easily track the rapid graphene growth induced by carbon segregation. Monolayer graphene extended on (111)- and (011)-oriented nickel grains, but was excluded from the (001) grains. This is due to the difference in carbon-nickel binding energy among these crystalline faces. This work proves the usefulness of in situ SEM imaging for the investigation of large area graphene growth.     

An electron microscope investigation of domain structures in thin terbium foils

Thin foils have been prepared from a high quality terbium single crystal for investigation in the transmission electron microscope. The preparation process involved spark machining, chemical polishing and ion beam thinning. The electron microscope was used to examine both the foil microstructure and its magnetic domain structure down to a temperature of 150 K. Below 230 K a narrow periodic magnetic structure running parallel to the in-plane b-axis was formed. This persisted over a temperature range of 10 K before giving way to a less regular pattern. As the temperature was lowered to 150 K the density of domain walls decreased and their deviation from the b-direction became more pronounced. A qualitative explanation of the observations is given.     

In situ observations of domain wall motion in Mn–Zn and Ni–Zn ferrites by Lorentz microscopy and electron holography

Domain wall motion in Mn–Zn and Ni–Zn ferrites with applied magnetic fields is investigated by in situ observations with Lorentz microscopy and electron holography. It is found that both Mn–Zn and Ni–Zn ferrites have a mean grain size of approximately 10 μm and several pores with sizes ranging from 0.2 to 1.1 μm. In situ observations by Lorentz microscopy with an applied magnetic field reveals that in Mn–Zn ferrite, the domain walls move easily across the grain boundary, while in Ni–Zn ferrite, the domain walls move along the grain boundary but are pinned at the grain boundary and pores. From in situ observations of Ni–Zn ferrite by electron holography, it is clarified that domain wall pinning at the grain boundary retards a sensitive increase in magnetic flux parallel to the applied field direction, which is considered to result in high hysteresis loss.     

Thickness measurement of cobalt foils using ultramicrotome cuts and electron microscopy

A method of thickness measurement of cobalt foils using transverse ultramicrotome cuts of foils embedded in Araldite is described. A new two-stage gelatine-carbon replica technique was developed. For a foil with inhornogeneous thickness, the method enables an exact determination of the position on the foil of the spot where thickness is measured. Although glass knives only were available for cutting, the accuracy of thickness measurement was better than ±1000 Å.     

In situ TEM study of mechanical behaviour of twinned nanoparticles

There is strong interest in studying changes in mechanical properties with reducing grain size. The rational is that consequent dislocation glide cannot be sustained, resulting in an increase in material strength. However, this comes with the cost of a reduction in ductility. It has been shown that coherent twin boundaries in nanostructured Cu improve the ductility to 14% [Lu et al., Science 324 (2009) p. 349]. In this paper, we report for the first time the compression of individual nanoparticles using an in situ force probing holder in the transmission electron microscope. Four types of nanoparticles were tested, three with twin boundaries (decahedra, icosahedra and a single twin) and one free of defects (octahedral). Our results indicate the yield strength of the twinned nanoparticles is between 0.5 and 2.0 GPa. The total malleability for the twinned particles range from 80 to 100%. In addition, experimental results were reproduced by MD simulations of the compression phenomena and suggest that the outstanding mechanical properties are related with partial dislocation multiplication at twin boundaries.     

In situ transmission electron microscopy study of the nucleation and grain growth of Ge2Sb2Te5 thin films

The nucleation and grain growth of the Ge₂Sb₂Te₅ (GST) thin films were studied using high voltage electron microscope operated at 1250 kV. As a result, we have found that 2 nm-sized nucleus forms as a cluster which atoms are arranged regularly at the stage of nucleation prior to the formation of grains having crystal structure. The high-resolution transmission electron microscopy study and fast-Fourier transformations revealed that coexistence of face-centered-cubic (FCC) and hexagonal structure occurs, and formation of twin defect is found in the hexagonal structure during the grain growth as the annealing temperature is increased. GST grain having the hexagonal structure grow from the surface, and the growth proceeded perpendicular to the [0 0 0 1], namely the path parallel to the (0 0 0 1) plane. Consequently, grain growth to a large-scale result in a lengthened shape.     

In situ synthesis of mesoporous CdS nanoparticles in ternary cubic phase lyotropic liquid crystal

An in situ technique for the synthesis of CdS nanoparticles in a ternary lyotropic cubic phase liquid crystal has been carried out. The extremely viscous cubic phase liquid-crystal system consists of poly(oxyethylene)₁₀ nonyl phenol ether as non-ionic surfactant, octane as oil phase and an aqueous phase containing reactant ions (Cd²⁺ and S^2-). Thioacetamide (TAA) has been utilized as a source for slow release of sulfur in the in situ synthesis of CdS. Rheological results show that CdS nanoparticle growth did not disrupt the structure of the cubic phase liquid-crystal system. This indicates that homogenous synthesis of CdS in the liquid crystal had been achieved. The final products were characterized using X-ray photoelectron spectroscopy, thermal gravimetric analysis, transmission electron microscopy and UV-visible spectroscopy. It was found that the CdS nanoparticles formed have a mesoporous structure with a size dependent on the TAA decomposition aging time. Received: 29 March 2002 / Accepted: 4 September 2002 / Published online: 17 December 2002 RID="*" ID="*"Corresponding author. Fax: +603-8921/3257, E-mail: shahidan@pkrisc.cc.ukm.my     

In situ TEM nanoindentation of nanoparticles

The deformation behavior of nanoparticles continues to be an exciting area for materials research. Typically, nanoparticles show a conspicuous lack of dislocations, even after significant deformation. Therefore, it has been suggested that dislocations cannot exist or/do not play a role on the deformation of nanoparticles. In situ TEM nanoindentation is a critical tool for addressing this issue because it allows for the deformation to be monitored in real time. In this article, we discuss some of the experimental needs and challenges for performing in situ nanoindentation TEM experiments on nanoparticles. In addition, we show both diffraction contrast and phase contrast in situ TEM nanoindentation experiments on silver nanoparticles with diameters below 50nm. Evidence of the presence of dislocations was observed during deformation, but upon unloading dislocations disappeared.     

原位透射电子显微学进展及应用

文章简要介绍了近年来原位透射电子显微学的进展,并指出,原位透射电子显微技术的发展使得在纳米、原子层次观察样品在力、热、电、磁作用下以及化学反应过程中的微结构演化成为可能。通过研究物质在外界环境作用下的微结构演化规律,揭示其原子结构与物理化学性质的相关性,指导其设计合成和微结构调控,促进新物质的探索和深层次物质结构研究,为解决凝聚态物理学中的具体问题提供了直接、准确和详细的方法。     

原位透射电子显微学进展及应用

文章简要介绍了近年来原位透射电子显微学的进展,并指出,原位透射电子显微技术的发展使得在纳米、原子层次观察样品在力、热、电、磁作用下以及化学反应过程中的微结构演化成为可能。通过研究物质在外界环境作用下的微结构演化规律,揭示其原子结构与物理化学性质的相关性,指导其设计合成和微结构调控,促进新物质的探索和深层次物质结构研究,为解决凝聚态物理学中的具体问题提供了直接、准确和详细的方法。