Gemini表面活性剂烷烃尾链在吸附和聚集过程中的疏水协同效应(英文)

以表面张力法测定了系列Gemini表面活性剂m-6-m以及对应单体表面活性剂CmTABr的临界胶束浓度(cmc)和降低水表面张力20mN·m-1需要的浓度(pC20).比较这些参数表明m-6-m胶束化和在界面吸附的能力均强于CmTABr,这被归结为Gemini表面活性剂烷烃尾链间的疏水协同效应.与不对称Gemini表面活性剂12-6-m比较,对称的Gemini结构更有利于表面活性剂的聚集和吸附.     

手性赖氨酸基Gemini表面活性剂的表面性能

用表面张力法、电导法和稳态荧光法研究了手性Gemini表面活性剂[C₁₂-m-C₁₂] Na₂（m=2,4,6）和[C₁₂-T-C₁₂] Na₂的表面性能及临界胶束聚集数,并计算胶束形成的热力学参数,用圆二色谱法考察了[C₁₂-2-C₁₂] Na₂在不同浓度下的立体构型. 结果表明,手性Gemini表面活性剂的临界胶束浓度（cmc）和临界表面张力γ_cmc随着连接基链长增加或刚性增强而增大;ΔG_m⁰和ΔH_m⁰为负值,|ΔH_m⁰|比|-TΔS_m⁰|小很多,说明胶束化过程为熵驱动的自发放热过程;随着连接基链长增加或刚性增强,ΔG_m⁰和ΔH_m⁰逐渐增大,ΔS_m⁰和临界胶束聚集数逐渐减小,表明其胶束化能力随之降低;当浓度大于cmc时,手性Gemini表面活性剂可形成手性超分子聚集体.     

稳态荧光探针法测定三聚季铵盐表面活性剂的胶束聚集数

以芘为荧光探针, 十六烷基氯化吡啶(CPC)为猝灭剂, 以芘的饱和水溶液为溶剂配制表面活性剂溶液, 根据芘的荧光强度之比I1/I3随表面活性剂水溶液浓度的变化, 测定了三聚季铵盐表面活性剂CTTTA的cmc值, 测定值与表面张力法测定的cmc值一致；当猝灭剂CPC的浓度取0.1~0.3 mmol·L-1范围时, 用稳态荧光探针法测定了CTTTA的胶束聚集数. 实验数据表明, 表面活性剂溶液浓度为6~10倍cmc时, 胶束聚集数N随表面活性剂浓度增大而线性增大, 并用外推法得到CTTTA的临界胶束聚集数.     

新型腰果酚双子表面活性剂的合成及表面活性

以天然生物质腰果酚、1,3-二溴丙烷及氯磺酸为原料,通过醚化、磺化及中和三步反应合成了一类新型的腰果酚基磺酸盐双子(Gemini)表面活性剂.采用傅立叶转换红外光谱仪和核磁共振谱仪表征了产物的结构;采用滴体积法测定了腰果酚Gemini表面活性剂的表面张力,研究了水溶液的表面性质,并与相应的单基腰果酚基磺酸盐表面活性剂进行了对比.结果表明:腰果酚Gemini表面活性剂水溶液的临界胶束浓度(cmc)为6.20×10-2 mmol.L-1,远小于相应的单基腰果酚表面活性剂水溶液的cmc(8.40mmol.L-1);其临界表面张力γcmc为36.92mN.m-1,与单基腰果酚表面活性剂水溶液的相近(γcmc为38.41mN.m-1).与此同时,腰果酚Gemini表面活性剂水溶液的最小分子截面积Amin为0.27nm2,比相应的单基表面活性剂水溶液的小得多.     

多支链烷基苯磺酸钠水溶液的表面性质

用自制的四种高纯度多支链烷基苯磺酸钠,研究了支链结构对其表面性质的影响.结果表明,随支链烷基碳数增加,临界胶束浓度降低,标准吸附自由能DGadӨ更负;但是,饱和吸附量Γmax却随支链烷基碳数增加而减小,且临界胶束浓度时的表面张力γcmc随吸附量减小而降低,表现出与一般表面活性剂不同的变化趋势.从多支链烷基苯磺酸钠的分子结构特点,解释了随支链烷基碳数增加Γmax和γcmc的变化规律,探讨了分子的独占面积(as)对Γmax及γcmc的影响.     

新型阴离子Gemini表面活性剂与非离子表面活性剂C10E6混合溶液的胶团化的研究

研究了烷基苯磺酸盐Gemini表面活性剂Ia与非离子表面活性剂C10E6溶液混合胶团中分子间的相互作用. 通过表面张力法测定了Ia 和C10E6不同比例不同温度下的临界胶束浓度(cmc). 结果表明, 两种表面活性剂以任何比例复配的cmc比单一表面活性剂的cmc都低, 表现出良好的协同效应. 传统型非离子表面活性剂C10E6、Gemini表面活性剂Ia及混合物的cmc都随着温度升高而降低. 而且, 任何配比的混合胶团中两种表面活性剂分子间的相互作用参数β都是负值, 这说明两种表面活性剂在混合胶团中产生了相互吸引的作用. 混合表面活性剂体系的胶团聚集数比单一Ia的大, 但比单一C10E6的小. 向Gemini表面活性剂Ia胶束中加入非离子表面活性剂C10E6会使胶束的微观极性变小.     

乙醇/水混合溶剂中Gemini表面活性剂的表面性质

通过对Gemini表面活性剂12-s-12 (Et)(s=4, 6, 8, 10, 12)体系在乙醇/水混合溶剂中的表面张力曲线的测定, 对该体系的表面性质进行了研究. 发现随乙醇/水比例变化, Gemini各种表面化学性质, 如临界胶束浓度(cmc)、表面张力(γcmc)、饱和吸附量(Γmax)和最小分子占有面积(Amin)等的变化规律. 拓展了Gemini表面活性剂在混合溶剂中表面吸附的研究.     

支链醇对Gemini表面活性剂表面活性和胶束化行为的影响

Gemini表面活性剂是一类高效的新型表面活性剂,而醇是工业界和日化领域最常采用的表面活性剂助剂,因此研究不同结构的醇对Gemini表面活性剂表面活性和胶束化行为的影响规律和机理对于促进Gemini表面活性剂的发展和实际应用具有重要意义.利用表面张力、电导、等温滴定微量热,低温透射电镜和核磁共振研究了直链醇1-戊醇和具有相同主链的支链醇2-己醇与3-庚醇对具有不同长度连接基团阳离子季铵盐型Gemini表面活性剂C₁₂C_SC₁₂Br₂ （S=2,4,6,8,10,12）的表面活性和胶束化行为的影响,结果发现,支链醇能够显著影响表面活性剂在气/液界面的排布,使得C₂₀ （使溶剂的表面张力降低20 mN/m所需的表面活性剂浓度）和γ_CMC （CMC时表面张力值）随醇支化度的增加而显著降低,而支链醇对表面活性剂在溶液中的临界胶束浓度以及胶束的尺寸和形貌均没有明显影响,同时这些醇对Gemini表面活性剂的影响与连接基团的长度相关.阐述了上述结果产生的机理,将有助于指导如何选择合适结构的醇助剂去调控Gemini表面活性剂的表面和溶液性质.     

三联阳离子表面活性剂的合成及复配性能

以环氧氯丙烷、叔胺、甘油为主要原料,水为溶剂,经过开环、季铵化反应,合成了新型三联季铵盐阳离子表面活性剂(Ⅲ-12-4),得率为86.9%。采用质谱和元素分析测试技术对产物结构进行表征,证明所得产物即为目标产物。通过采用DCA-315型表面张力及动态接触角分析仪对表面张力的测定研究了其与十二烷基硫酸钠(SDS)复配体系的表面化学性质,稳态荧光探针法考察了微极性变化,还得到了胶束聚集数。结果表明,复配体系与单一体系相比,具有更低的临界胶束浓度(cmc)和降低表面张力的效能,表现出协同效应。当n(Ⅲ-12-4)∶n(SDS)=3∶7时,复配体系的临界表面张力(γcmc)和临界胶束浓度分别为16.95mN/m和1.33×10-5mol/L,并且胶束聚集数只有SDS的1/6,混合胶束结构紧密,微极性降低。     

一种新型表面活性剂的表面活性的研究

采用表面张力法确定了新型表面活性剂3-对壬基苯氧基-2-羟丙基三甲基溴化 铵的临界胶束浓度(cmc)，并考察了盐度、温度和pH值对其cmc的影响。结果表明， 此种表面活性剂的表面活性较高，盐度对其cmc影响最大，其次是pH值，温度对其 cmc的影响较为复杂。理论计算结果表明，采用热力学函数可较好地解释试验结果 。     

含Gemini表面活性剂的PVA分散液晶的微结构与性能

采用N,N'-二(十二烷基)-N,N,N',N',N″-五甲基-1,4,7-三氮杂双碘化氨为Gemini表面活性剂,液晶为4-正戊基-4'-氰基联苯(5CB),通过微胶囊法制备了聚乙烯醇(PVA)分散液晶薄膜,着重研究Gemini表面活性剂对PVA分散液晶薄膜的微结构、电光特性的影响.结果表明,加入Gemini表面活性剂仅略微增加了PVA与5CB液晶的相容性,PVA分散液晶仍保持较高的相分离程度,但是Gemini表面活性剂使液晶微滴尺寸明显变小,液晶相均匀分散地于PVA基体中,液晶指向矢构型由两极型变化为径向型,PVA分散液晶薄膜的对比度和响应速度明显提高,同时保持较低的驱动电压.     

Gemini阳离子表面活性剂的合成及其胶束生成 Gemini阳离子表面活性剂的合成及其胶束生成

Cationic Gemini surfactants, alkanediyl-α,ω-bis(dimethyldodecylammonium bromide) have been synthesized by the following method: firstly dodecyl bromide was prepared by the reaction of dodecanol with bromic acid in the presence of strong sulfuric acid. Dodecylbromide was then reacted with N,N-tetramethyl ethane diamine(or N,N-tetramethyl hexana diamine) to prepare the title-compounds. Micellization of these Gemini surfactants was investigated using conductivity measurement. The results showed that the critical micelle concentration(cmc) of the Gemini surfactants has a much lower value compared with that of the corresponding “ monomer” . For a series of the Geminis with the same length(s) in the spacer chain, the cmc decreased with increasing the carbon number (m) in the alkyl chain. The aggregation number(N) of the micelle also drastically decreased with m. For the same value of m, the cmc varied slightly with s, which indicated that the electrostatic interaction between the ionic-groups of the “ monomer” has been naturally changed duo to a link between the two ionic-groups of the “ monomer” through a spacer. However, N was strongly decreased with s,which may be a reason of steric inhibition coming from the ionic-groups due to a link of spacer. With increasing temperature, micellization of the Gemini surfactants was slightly enhanced.     

The photodimerization of a cinnamoyl moiety derivative in dilute solution based on the intramolecular chain interaction of gemini surfactant

A Gemini surfactant, sodium N, N'-di(4-n-butyloxy cinnamoly)-L-cystine, containing a cinnamoyl moiety in the alkyl chains and disulfide bond in the spacer was designed and synthesized. The incorporation of a cinnamoyl moiety into the alkyl chains of Gemini surfactant makes it easy to probe the conformational information of the amphiphile molecule. The UV/vis absorption spectra and steady-state fluorescence were investigated at a concentration far below the critical micelle concentration (cmc). Both blue-shift of absorption and red-shift of fluorescence emission spectra indicate the existence of intramolecular interaction between the two alkyl chains in Gemini surfactant in the singly dispersed state. Results based on the breakdown of the disulfide bond by dithiotheritol (DTT) further confirmed the conclusion. Moreover, the characteristic of intramolecular chain interaction in Gemini surfactant improves the topochemical geometrical requirements of cinnamoyl moiety and increases the local concentration of reactant in dilute solution. Utilizing the incorporation of cinnamoyl moiety into the alkyl chains of Gemini surfactant, the cinnamoyl moiety upon irradiation undergoes dimerization in dilute aqueous solution with high yield of 78%.     

Synthesis and surface-active property of bis-quaternary ammonium-sodium sulfate Gemini surfactant

N,N-dimethyldodecylamine, hydrochloride and epichlorohydrin (molar ration is 2:1:1) were used to synthesize bis-quaternary ammonium Gemini surfactant with a hydroxyl in its spacer group by the one-pot method. This hydroxyl was sulfonated by chlorosulfonic acid and then neutralized to bis-quaternary ammonium-sodium sulfate zwitterionic Gemini surfactant. The yield of the final product was 78%, and the melting point was 231–233°C. Its structure was characterized by IR, ¹H-NMR, MS, and elemental analyses. The critical micelle concentration (cmc) and surface tension of the novel zwitterionic Gemini surfactant in aqueous solution at 15°C are 7.2×10⁻⁵ mol/L and 34.5 mN/m, respectively. __________ Translated from Journal of Wuhan University (Natural Science Edision), 2005, 51(6) (in Chinese)     

季铵盐型Gemini表面活性剂的胶束化动力学研究

采用停流法并结合Aniannson-Wall理论, 研究了联接基为(CH2)2, (CH2)3, (CH2)4和(CH2)6的季铵盐型Gemini表面活性剂胶束的形成-破坏过程. 动力学的研究结果表明, 胶束形成-破坏过程的弛豫时间(τ2)与联接基的长度、表面活性剂的浓度、反离子的浓度以及温度有关. 随联接基长度的增加, 季铵盐型Gemini表面活性剂胶束形成-破坏过程的弛豫时间缩短. 当温度高于293 K时, 随着反离子浓度的增加, 1/τ2将出现一个最低值. 根据核化焓结果提出了不同的联接基长度的季铵盐型Gemini表面活性剂具有不同的胶束形成-破坏过程的机理.     

Synthesis and Applications of Alkylbenzene Sulfonate Gemini Surfactants

A series of anionic Gemini surfactants with the same structure except for the spacer and side chain length of the alkylbenzene sulfonate were synthesized based on dodecyl benzene and toluene. The structures of the compounds were confirmed by infrared and nuclear magnetic resonance spectroscopy, and elemental analyses. The effect of spacer and side chain length on the interfacial tension of Gemini surfactant solution was investigated by comparison of the critical micelle concentration (cmc) of the surfactants in aqueous solution using the drop volume method, and the surface tension at the cmc (γcmc). The Gemini surfactant with the best properties was used as emulsifier in emulsion polymerization of methyl methacrylate, and its foam stability was also determined.     

Self-assembled Gemini surfactant film-mediated dispersion stability

The force-distance curves of 12-2-12 and 12-4-12 Gemini quaternary ammonium bromide surfactants on mica and silica surfaces obtained by atomic force microscopy (AFM) were correlated with the structure of the adsorption layer. The critical micelle concentration was measured in the presence or absence of electrolyte. The electrolyte effect (the decrease of CMC) is significantly more pronounced for Gemini than for single-chain surfactants. The maximum compressive force, F(max), of the adsorbed surfactant aggregates was determined. On the mica surface in the presence of 0.1 M NaCl, the Gemini micelles and strong repulsive barrier appear at surfactant concentrations 0.02-0.05 mM, which is significantly lower than that for the single C(12)TAB (5-10 mM). This difference between single and Gemini surfactants can be explained by a stronger adsorption energy of Gemini surfactants. The low concentration of Gemini at which this surfactant forms the strong micellar layer on the solid/solution interface proves that Gemini aggregates (micelles) potentially act as dispersing agent in processes such as chemical mechanical polishing or collector in flotation. The AFM force-distance results obtained for the Gemini surfactants were used along with turbidity measurements to determine how adsorption of Gemini surfactants affects dispersion stability. It has been shown that Gemini (or two-chain) surfactants are more effective dispersing agents, and that in the presence of electrolyte, the silica dispersion stability at pH 4.0 can also be achieved at very low surfactant concentrations ( approximately 0.02 mM).