Effect of Extended π‐Conjugation Structure of Donor–Acceptor Conjugated Copolymers on the Photoelectronic Properties

New donor–acceptor conjugated copolymers based on alkylthienylbenzodithiophene (BDTT) and alkoxynaphthodithiophene (NDT) have been synthesized and compared with their benzo[1,2‐b:4,5‐b′]dithiophene (BDT)‐based analogues to investigate the effect of the extended π conjugation of the polymer main chain on the physicochemical properties of the polymers. A systematic investigation into the optical properties, energy levels, field‐effect transistor characteristics, and photovoltaic characteristics of these polymers was conducted. Both polymers demonstrated enhanced photovoltaic performance and increased hole mobility compared with the BDT‐based analogue. However, the BDTT‐based polymer (with π‐conjugation extension perpendicular to main chain) gave the highest power conversion efficiency of 5.07 % for the single‐junction polymer solar cell, whereas the NDT‐based polymer (with π‐conjugation extension along the main chain) achieved the highest hole mobility of approximately 0.1 cm² V^?1 s^?1 based on the field‐effect transistor; this indicated that extending the π conjugation in different orientations would have a significant influence on the properties of the resulting polymers.     

On‐Top π‐Stacking of Quasiplanar Molecules in Hole‐Transporting Materials: Inducing Anisotropic Carrier Mobility in Amorphous Films

Dimers of partially oxygen‐bridged triarylamines were designed and synthesized as hole‐transporting materials. X‐ray structural analyses revealed that these compounds form on‐top π‐stacking aggregates in the crystalline state. TRMC measurements showed that high levels of anisotropic charge transport were induced in the direction of the π‐stacking. Surprisingly, even in vacuum‐deposited amorphous films, these compounds retained some of the face‐on π‐stacking, thus facilitating an out‐of‐plane carrier mobility.     

Synthesis,Properties, and n‐Type Transistor Characteristics of π‐Conjugated Compounds Having a Carbonyl‐Bridged Thiazole‐Fused Polycyclic System

A series of electron‐deficient π‐conjugated systems with 4,9‐dihydro‐s‐indaceno[2,1‐d:6,5‐d′]dithiazole‐4,9‐dione‐based structures and fluorinated acyl groups as the terminal units have been designed and synthesized for application as organic field‐effect transistor (OFET) materials. The thermal, photophysical, and electrochemical properties and OFET performance of the synthesized compounds were investigated. OFET evaluation revealed that all compounds exhibited typical electron‐transporting characteristics, and electron mobilities up to 0.26 cm² V^?1 s^?1 could be achieved. The air stabilities of OFET operation were dependent on the nature of the compounds and were investigated by X‐ray diffraction and atomic force microscopy. The terminal units had a great influence not only on the molecular properties, but also on the film‐forming properties and OFET performance.     

Preparation and Acid‐Responsive Photophysical Properties of T‐Shaped π‐Conjugated Molecules Containing a Benzimidazole Junction

T‐shaped π‐conjugated molecules with an N‐methyl‐benzimidazole junction have been synthesized and their acid‐responsive photophysical properties owing to the change in the π‐conjugation system are discussed. T‐shaped π‐conjugated molecules consist of two orthogonal π‐conjugated systems including a phenyl thiophene extended from the 2‐position and alkyl phenylenes connected through various π‐spacers from the 4,7‐positions of the N‐methyl‐benzimidazole junction. The π‐spacers, such as thiophene, ethyne, and ethane, have an effect on the acid response of photophysical properties in terms of changes in conformation, excited‐state energy and charge‐transfer (CT) characteristics. In particular, the π‐conjugated molecule with ethynyl spacers exhibited a marked redshift in the fluorescence spectrum with a large Stokes shift upon the addition of acid, whereas the other molecules showed substantial quenching. The redshift in emission was studied in detail by temperature‐dependent fluorescence measurements, which indicated the transition to a CT state over the finite activation energy at the excited state. The change in the frontier molecular orbitals upon acid addition was further discussed by means of DFT calculations.     

Anisotropic Dissociation of π–π Stacking and Flipping‐Motion‐Induced Crystal Jumping in Alkylacridones and Their Dicyanomethylene Derivatives

Ethylacridone ( 1 b ) and dicyanomethylenated acridones 2 a , b , d showed crystal‐jumping activity upon heating. This is the first example of thermosalient behavior in a simple aromatic ketone and its derivatives. A systematic investigation of the jumping behavior of derivatives with different alkyl chains by variable‐temperature X‐ray crystal‐structure analyses revealed the mechanism of this phenomenon. Anisotropic dissociation of π stacking in a dimer was important for inducing crystal jumping in 1 b , whereas the collective fluctuation/flipping motion of a dicyanomethylene unit induced crystal jumping in 2 .     

Bi‐anchoring Organic Dyes that Contain Benzimidazole Branches for Dye‐Sensitized Solar Cells: Effects of π Spacer and Peripheral Donor Groups

Benzimidazole‐branched bi‐anchoring organic dyes that contained triphenylamine/phenothiazine donors, 2‐cyanoacrylic acid acceptors, and various π linkers were synthesized and examined as sensitizers for dye‐sensitized solar cells. The structure–activity relationships in these dyes were systematically investigated by using absorption spectroscopy, cyclic voltammetry, and density functional theory calculations. The wavelength of the absorption peak was more‐heavily influenced by the nature of the π linker than by the nature of the donor. For a given donor, the absorption maximum (λ_max) was red‐shifted on changing the π linker from phenyl to 2,2′‐bithiophene, whilst the dyes that contained triphenylamine units displayed higher molar extinction coefficients (?) than their analogous phenothiazine‐based triphenylamine dyes, which led to good light‐harvesting properties in the triphenylamine‐based dyes. Electrochemical data for the dyes indicated that the triphenylamine‐based dyes possessed relatively low‐lying HOMOs, which could be beneficial for suppressing back electron transfer from the conduction band of TiO₂ to the oxidized dyes, owing to facile regeneration of the oxidized dye by the electrolyte. The best performance in the DSSCs was observed for a dye that possessed a triphenylamine donor and 2,2′‐bithiophene π linkers. Electron impedance spectroscopy (EIS) studies revealed that the use of triphenylamine as the donor and phenyl or 2,2′‐bithiophene as the π linkers was beneficial for disrupting the dark current and charge‐recombination kinetics, which led to a long electron lifetime of the injected electrons in the conduction band of TiO₂.     

Modulating Photo‐ and Electroluminescence in a Stimuli‐Responsive π‐Conjugated Donor–Acceptor Molecular System

Functional organic materials that display reversible changes in fluorescence in response to external stimuli are of immense interest owing to their potential applications in sensors, probes, and security links. While earlier studies mainly focused on changes in photoluminescence (PL) color in response to external stimuli, stimuli‐responsive electroluminescence (EL) has not yet been explored for color‐tunable emitters in organic light‐emitting diodes (OLEDs). Here a stimuli‐responsive fluorophoric molecular system is reported that is capable of switching its emission color between green and orange in the solid state upon grinding, heating, and exposure to chemical vapor. A mechanistic study combining X‐ray diffraction analysis and quantum chemical calculations reveals that the tunable green/orange emissions originate from the fluorophore's alternating excited‐state conformers formed in the crystalline and amorphous phases. By taking advantage of this stimuli‐responsive fluorescence behavior, two‐color emissive OLEDs were produced using the same fluorophore in different solid phases.     

Pyrrolo[3,2‐b]pyrroles—From Unprecedented Solvatofluorochromism to Two‐Photon Absorption

A combined experimental and theoretical study of the two‐photon absorption (2PA) properties of a series of quadrupolar molecules possessing a highly electron‐rich heterocyclic core, pyrrolo[3,2‐b]pyrrole, is presented. In agreement with quantum‐chemical calculations, large 2PA cross‐section values, σ_2PA≈10²–10³ GM (1 GM=10⁵⁰ cm⁴ s photon^?1), are observed at wavelengths of 650–700 nm, which correspond to the two‐photon allowed but one‐photon forbidden transitions. The calculations also predict that increased planarity of this molecule through removal of two N‐substituents leads to further increase in the σ_2PA values. Surprisingly, the most quadrupolar pyrrolo[3,2‐b]pyrrole derivative, containing two 4‐nitrophenyl substituents at positions 2 and 5, demonstrates a very strong solvatofluorochromic effect, with a fluorescence quantum yield as high as 0.96 in cyclohexane, whereas the fluorescence vanishes in DMSO.     

Energetic N‐Nitramino/N‐Oxyl‐Functionalized Pyrazoles with Versatile π–π Stacking: Structure–Property Relationships of High‐Performance Energetic Materials

N‐Nitramino/N‐oxyl functionalization strategies were employed to investigate structure–property relationships of energetic materials. Based on single‐crystal diffraction data, π–π stacking of pyrazole backbones can be tailored effectively by energetic functionalities, thereby resulting in diversified energetic compounds. Among them, hydroxylammonium 4‐amino‐3,5‐dinitro‐1H‐pyrazol‐1‐olate and dipotassium N,N′‐(3,5‐dinitro‐1H‐pyrazol‐1,4‐diyl)dinitramidate, with unique face‐to‐face π–π stacking, can be potentially used as a high‐performance explosive and an energetic oxidizer, respectively.     

Ladder‐Type π‐Conjugated 4‐Hetero‐1,4‐dihydrophosphinines: A Structure–Property Study

π‐Conjugated six‐membered 1,4‐dihydrophosphinines containing a heteroatom (Si, P, S) at the 4 position were synthesized and systematically studied. X‐ray crystallographic analyses showed that the central six‐membered heterocyclic rings are almost planar. The sum of the angles around the phosphorus atom increases by 23° from the trivalent phosphorus to the phosphonium atom in the thiaphosphinine system, which is consistent with the NMR spectroscopic studies. UV/Vis spectroscopy and theoretical calculations revealed that the communication between the phosphorus center and the benzothiophene moiety is enhanced by the incorporation of a sulfur atom into the molecular scaffold. The increased conjugation endows the thiaphosphinines with interesting emission properties. Theoretical calculations supported the postulation that the orbital coupling between the π system and a σ* orbital could be enhanced in the thiaphosphinine system, especially through a phosphonium center. Cyclic voltammetry studies revealed that the thiaphosphinine oxide, thiaphosphonium, and cis‐diphosphinine oxide exhibit quasi‐reversible reduction processes, which demonstrate that simple changes in the bridge heteroatoms help to efficiently tune the redox properties of the ladder‐type 4‐hetero‐1,4‐dihydrophosphinines.     

Reactivity Controlling Factors for an Aromatic Carbon‐Centered σ,σ,σ‐Triradical: The 4,5,8‐Tridehydroisoquinolinium Ion

The chemical properties of the 4,5,8‐tridehydroisoquinolinium ion (doublet ground state) and related mono‐ and biradicals were examined in the gas phase in a dual‐cell Fourier‐transform ion cyclotron resonance (FT‐ICR) mass spectrometer. The triradical abstracted three hydrogen atoms in a consecutive manner from tetrahydrofuran (THF) and cyclohexane molecules; this demonstrates the presence of three reactive radical sites in this molecule. The high (calculated) electron affinity (EA=6.06 eV) at the radical sites makes the triradical more reactive than two related monoradicals, the 5‐ and 8‐dehydroisoquinolinium ions (EA=4.87 and 5.06 eV, respectively), the reactivity of which is controlled predominantly by polar effects. Calculated triradical stabilization energies predict that the most reactive radical site in the triradical is not position C4, as expected based on the high EA of this radical site, but instead position C5. The latter radical site actually destabilizes the 4,8‐biradical moiety, which is singlet coupled. Indeed, experimental reactivity studies show that the radical site at C5 reacts first. This explains why the triradical is not more reactive than the 4‐dehydroisoquinolinium ion because the C5 site is the intrinsically least reactive of the three radical sites due to its low EA. Although both EA and spin–spin coupling play major roles in controlling the overall reactivity of the triradical, spin–spin coupling determines the relative reactivity of the three radical sites.     

Stereoselective Synthesis and Physicochemical Properties of Liquid‐Crystal Compounds Possessing a trans‐2,5‐Disubstituted Tetrahydropyran Ring with Negative Dielectric Anisotropy

Three stereoselective syntheses and the physicochemical properties of trans,trans‐5‐(4‐ethoxy‐2,3‐difluorophenyl)‐2‐(4‐propylcyclohexyl)tetrahydropyran, which is an important liquid‐crystal compound with a large negative dielectric anisotropy (Δε=?7.3), are described. The key step in the construction of the trans‐2,5‐disubstituted tetrahydropyran ring in the first approach involved a benzylic cation mediated intramolecular olefin cyclization of a 2‐allyloxy‐1‐arylethanol derivative. The second method included the Et₂Zn‐induced 1,2‐aryl shift of a bromohydrin obtained from a hetero‐Diels–Alder reaction, followed by stereoselective bromination. The third approach utilized the hetero‐Diels–Alder reaction of trans‐4‐propylcyclohexanecarboxaldehyde and a 2‐aryl‐3‐(trimethylsilyl)oxy‐1,3‐butadiene, followed by stereoselective protonation. From results obtained by using a quantum chemical calculation method, the reason why the target compound shows a large negative Δε value is discussed.     

Energetic 4,4′‐Oxybis[3,3′‐(1‐hydroxytetrazolyl)]furazan and Its Salts

Energetic compounds that incorporate multiple nitrogen‐rich heterocycles are of great interest for high‐density energetic materials. A facile synthetic strategy to combine an oxy bridge and furazan groups, as well as tetrazole‐ols, into a molecule ( 5 ) was found. Some energetic salts based on 5 were prepared by neutralization. All of the compounds were fully characterized. Additionally, the structure of 7 has been elucidated by single‐crystal XRD analysis. Physicochemical and energetic properties were also studied; these show that these newly designed energetic salts exhibit good thermal stabilities. Hydroxylammonium salt ( 6 ) has a detonation performance and sensitivities comparable with those of 1,3,5‐trinitroperhydro‐1,3,5‐triazine (RDX).     

4‐Aryl‐3,5‐bis(arylethynyl)aryl‐4H‐1,2,4‐triazoles: Multitasking Skeleton as a Self‐Assembling Unit

The synthesis of a series of 4‐aryl‐3,5‐bis(arylethynyl)aryl‐4H‐1,2,4‐triazoles derivatives is reported and the influence exerted by peripheral substitution on the morphology of the aggregates generated from these 1,2,4‐triazoles is investigated by SEM imaging. The presence of paraffinic side chains results in long fibrillar supramolecular structures, but unsubstituted triazoles self‐assemble into thinner ribbons and needle‐like aggregates. The crystals obtained from methoxy‐substituted triazoles have been utilised to elaborate a model that helps to justify aggregation of the investigated 1,2,4‐triazoles, in which the operation of arrays of C?H???π non‐covalent interactions plays a significant role. The results presented herein demonstrate the ability of simple molecules to behave as multitasking scaffolds with different properties, depending on peripheral substitution. Thus, although 1,2,4‐triazoles without long paraffinic side chains exhibit optical waveguiding behaviour, triazoles endowed with peripheral paraffinic side chains exhibit hexagonal columnar mesomorphism.     

Tetraphenylethene‐Based Conjugated Fluoranthene: A Potential Fluorescent Probe for Detection of Nitroaromatic Compounds

This study reports the synthesis and photophysical properties of a star‐shaped, novel, fluoranthene–tetraphenylethene (TFPE) conjugated luminogen, which exhibits aggregation‐induced blue‐shifted emission (AIBSE). The bulky fluoranthene units at the periphery prevent intramolecular rotation (IMR) of phenyl rings and induces a blueshift with enhanced emission. The AIBSE phenomenon was investigated by solvatochromic and temperature‐dependent emission studies. Nanoaggregates of TFPE, formed by varying the water/THF ratio, were investigated by SEM and TEM and correlated with optical properties. The TFPE conjugate was found to be a promising fluorescent probe towards the detection of nitroaromatic compounds (NACs), especially for 2,4,6‐trinitrophenol (PA) with high sensitivity and a high Stern–Volmer quenching constant. The study reveals that nanoaggregates of TFPE formed at 30 and 70 % water in THF showed unprecedented sensitivity with detection limits of 0.8 and 0.5 ppb, respectively. The nanoaggregates formed at water fractions of 30 and 70 % exhibit high Stern–Volmer constants (K_sv=79 998 and 51 120 m ^?1, respectively) towards PA. Fluorescence quenching is ascribed to photoinduced electron transfer between TFPE and NACs with a static quenching mechanism. Test strips coated with TFPE luminogen demonstrate fast and ultra‐low‐level detection of PA for real‐time field analysis.     

Reactions of a Ruthenium Complex with Substituted N‐Propargyl Pyrroles

In an investigation into the chemical reactions of N‐propargyl pyrroles 1 a – c , containing aldehyde, keto, and ester groups on the pyrrole ring, with [Ru]?Cl ([Ru]=Cp(PPh₃)₂Ru; Cp=C₅H₅), an aldehyde group in the pyrrole ring is found to play a crucial role in stimulating the cyclization reaction. The reaction of 1 a , containing an aldehyde group, with [Ru]?Cl in the presence of NH₄PF₆ yields the vinylidene complex 2 a , which further reacts with allyl amine to give the carbene complex 6 a with a pyrrolizine group. However, if 1 a is first reacted with allyl amine to yield the iminenyne 8 a , then the reaction of 8 a with [Ru]?Cl in the presence of NH₄PF₆ yields the ruthenium complex 9 a , containing a cationic pyrrolopyrazinium group, which has been fully characterized by XRD analysis. These results can be adequately explained by coordination of the triple bond of the propargyl group to the ruthenium metal center first, followed by two processes, that is, formation of a vinylidene intermediate or direct nucleophilic attack. Additionally, the deprotonation of 2 a by R₄NOH yields the neutral acetylide complex 3 a . In the presence of NH₄PF₆, the attempted alkylation of 3 a resulted in the formation the Fischer‐type amino–carbene complex 5 a as a result of the presence of NH₃, which served as a nucleophile. With KPF₆, the alkylation of 3 a with ethyl and benzyl bromoacetates afforded the disubstituted vinylidene complexes 10 a and 11 a , containing ester groups, which underwent deprotonation reactions to give the furyl complexes 12 a and 13 a , respectively. For 13 a , containing an O‐benzyl group, subsequent 1,3‐migration of the benzyl group was observed to yield product 14 a with a lactone unit. Similar reactivity was not observed for the corresponding N‐propargyl pyrroles 1 b and 1 c , which contained keto and ester groups, respectively, on the pyrrole ring.     

Towards Molecular Design Rationalization in Branched Multi‐Thiophene Semiconductors: The 2‐Thienyl‐Persubstituted α‐Oligothiophenes

The introduction of branching in multi‐thiophene semiconductors, although granting the required solubility for processing, results in an increased molecular fluxionality and a higher level of distortion, thus hampering π conjugation. Accordingly, branched oligothiophenes require rationalization of their structure–reactivity relationships for target‐oriented design and optimization of the synthetic effort. Our current research on spiderlike oligothiophenes affords deep insight into the subject, and introduces new, easily accessible molecules with attractive functional properties. In particular, a regular series, T′X _Y , of five new multi‐thiophene systems, T′5₃ , T′8₄ , T′11₅ , T′14₆ , and T′17₇ , constituted by five, eight, 11, 14, and 17 thiophene units, respectively, their longest α‐conjugated chain consisting of tri‐, tetra‐, penta‐, hexa‐, and heptathiophene moieties, respectively, has been synthesized and fully characterized from the structural, spectroscopic, and electrochemical point of view. The electronic properties of the monomers and their electropolymerization ability are discussed and rationalized as a function of their molecular structure, particularly in comparison with the series of 5‐(2,2′‐dithiophene)yl‐persubstituted α‐oligothiophenes ( TX _Y ) previously reported by us. These oligothiophenes are easily accessible materials, with promising properties for applications as active layers in multifunctional organic devices including solar cells.