Preparation of Homogeneous Hydrogels by Controlling the Crosslinker Reactivity and Availability

Network microstructures of polyacrylamide (PAAm) hydrogels were investigated by static light scattering measurements. The gels were prepared by free‐radical crosslinking polymerization of acrylamide (AAm). To suppress the degree of gel inhomogeneity, the crosslinker reactivity during gelation was controlled by decreasing its availability in the reaction system. Our first approach was the addition of the crosslinker N,N′‐methylenebis(acrylamide) (BAAm) in one or three portions during the course of the gelation reactions. As a second approach, a slightly water soluble crosslinker, namely ethylene glycol dimethacrylate (EGDM) was used as a crosslinker in AAm polymerization. Due to the low water solubility of EGDM, EGDM phase in the gelation system act as a reservoir of crosslinker so that the crosslinker can be supplied continuously to the aqueous reaction zone during the course of gelation. It was found that the delayed crosslinker addition technique further increases the degree of inhomogeneity of PAAm hydrogels. The results were explained with increasing viscosity of the reaction solution at the time of the crosslinker addition so that the crosslinking reactions are limited to local regions in the reaction system. The second approach, namely use of the slightly water soluble crosslinker EGDM significantly increases the degree of structural homogeneity of PAAm hydrogels.     

Ru(II)(tpy)2‐functionalized hydrogels: Synthesis,reversible responsiveness,and coupling with the belousov‐zhabotinsky reaction

This work aims at developing an approach to Ru(II)(Tpy)₂‐functionalized hydrogels and exploring the coupling of the hydrogels with the Belousov‐Zhabotinsky (BZ) reaction. Based on free radical polymerization, two synthetic routes are developed. The first one is the direct gelation by copolymerization of acrylamide as hydrophilic component and Ru(II)(Tpy)₂ as the functional group. The second one is carried out through a combined approach. A terpyridine‐containing hydrogel is first prepared and then post‐functionalized by coordination between Ru(III)(Tpy)Cl₃ and terpyridine groups in the hydrogel network. Utilizing the synthetic hydrogels, the reversible redox responsiveness, the coupling with the BZ reaction, the occurrence and the self‐oscillating properties of the BZ reaction in the hydrogel networks are studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2214–2222     

Preparation of rapidly curable hydrogels from gelatin and poly (carboxylic acid) and their adhesion to skin

Papidly curable hydrogels were prepared through chemical crosslinking of gelatin with poly(carboxylic acid)s including poly (L-glutamic acid) (PLGA), hyaluronic acid (HA), and poly (acrylic acid) (PAA) by use of water-soluble carbodiimide (WSC). The effects of the nature of added poly (carboxylic acid)s on gelation of mixed gelatinpoly (carboxylic acid) aqueous solutions and adhesion of the resulting hydrogels to the mouse skin were evaluated. The addition of poly (carboxylic acid) s reduced the gelation time of gelatin aqueous solutions except for HA. Mixed gelatin-PLGA solutions were cured more rapidly than other mixed solutions and the gelation time was shortened with the increasing PLGA molecular weight. The resulting gelatin-PLGA hydrogels exhibited stronger adhesion to the mouse skin than gelatin-HA and gelatin-PAA hydrogels. The bonding strength increased with the increase in PLGA molecular weight up to 83,000 and thereafter decreased. The longer gelation time and lower adhesion of the gelatin-PAA hydrogels than the gelatin-PLGA hydrogels seem to be due to poorer compatibility of gelatin with PAA than with PLGA. The mixed gelatin-PLGA solution underwent phase separation when the concentration and molecular weight of PLGA became higher than a threshold. The insignificant or suppressive effect of HA addition might be ascribed to the HA-WSC reaction which was the least effective in hydrogel formation.     

Swelling characterization of novel ternary semi‐IPNs: acrylamide/1‐vinylimidazole/PEG hydrogels

New ternary semi interpenetrating polymer networks (semi‐IPNs) systems containing acrylamide (AAm), 1‐vinylimidazole (VI) and poly (ethylene glycol) (PEG) have been prepared. AAm/VI hydrogels and semi‐IPN's, poly (AAm/VI/PEG) with 0.25, 0.50, 0.75 and 1.00 g of PEG (per 1.00 g AAm) were prepared by free radical solution polymerization in aqueous solution of AAm with VI as comonomer and a multifunctional crosslinker such as 1,4 butanediol dimethacrylate (BDMA). Swelling experiments were performed in water at 25°C, gravimetrically. The influence of VI and PEG content in hydrogels were examined. AAm/VI and AAm/VI/PEG hydrogels showed large extents of swelling in aqueous media, the swelling being highly dependent on the chemical composition of the hydrogels. Percentage swelling ratio of AAm/VI hydrogels and AAm/VI/PEG hydrogels was shown as 650–4167%. The values of equilibrium water content (EWC) of the hydrogels are between 0.8990 and 0.9750. Diffusion behavior was investigated. Water diffusion into hydrogels was found to be non‐Fickian in character. Copyright © 2007 John Wiley & Sons, Ltd.     

Water uptake and dye sorption studies of chemically crosslinked highly swollen novel ternary acrylamide‐based hydrogels including citraconic acid and sodium acrylate

Highly swollen hydrogels made by the polymerization of acrylamide (AAm) with some anionic monomers such as citraconic acid (CITA) and sodium acrylate (SA) were investigated as a function of composition to find materials with swelling and dye sorption properties. Highly swollen AAm/CITA/SA or AAm/SA/CITA hydrogels were prepared by free radical solution polymerization in aqueous solutions of AAm with CITA and SA as co‐monomers and two multifunctional crosslinkers such as ethylene glycol dimethacrylate (EGDMA) and 1,4‐butanediol dimethacrylate (BDMA). Swelling experiments were performed in water at 25°C, gravimetrically. Chemically crosslinked AAm/CITA/SA or AAm/SA/CITA hydrogels were used in experiments on sorption of water‐soluble monovalent cationic dye such as “Nil blue” (Basic Blue 12; BB 12). Equilibrium percentage swelling values of AAm/CITA/SA or AAm/SA/CITA hydrogels were calculated in the range of 1797–22,098%. Some swelling kinetic parameters were found. Diffusion behavior of water was investigated. Water diffusion into the hydrogels was found to be non‐Fickian in character. For sorption of cationic dye, BB 12 into the hydrogels was studied by batch sorption technique at 25°C. AAm/CITA/SA or AAm/SA/CITA hydrogels in the dye solutions showed coloration, whereas AAm hydrogel did not show sorption of any dye from the solution. The sorption capacity of AAm/CITA/SA or AAm/SA/CITA hydrogels was investigated. At the end of the experiments, 21.70–78.91% BB 12 adsorptions were determined. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of chemical structure on the properties of some hydrogels prepared by using gamma radiation polymerization

Several hydrogels were prepared using radiolytic polymerization of aqueous solutions of acrylamide or acrylamide containing appropriate comonomer such as acrylic acid, maleic acid, itaconic acid, and maleic anhydride. The hydrogels have been prepared at an irradiation dose of 30 kGy. The effects of the chemical structure of the monomer(s) and crosslinking agents on the yield of homopolymer(s) or copolymers have been studied. These crosslinking agents include N, N′‐methylene dimethacrylate (MDA) and N, N′‐methylene bisallyamide (MBA). The hydrogels obtained were characterized using swelling technique, thermal and spectroscopic analysis. The results obtained showed that the prepared samples are able to reject sodium ions and are not able to recover the Basic Blue Dye from their aqueous solution. © 2005 John Wiley & Sons, Ltd.     

Modeling of Swelling Behaviors of Acrylamide-Based Polymeric Hydrogels by Intelligent System

Hydrogels based on acrylamide (AAm) were synthesized by free radical polymerization in an aqueous solution using N,N’-methylenebisacrylamide (MBAAm) as crosslinker. To obtain anionic hydrogels, 2-acrylamido-2-methylpropanesulfonic acid sodium salt (AMPS) and acrylic acid (AAc) were used as comonomers. The swelling behaviors of all hydrogel systems were modeled using an artificial neural network (ANN) and compared with a multivariable least squares regression (MLSR) model and phenomenal model. The predictions from the ANN model, which associated input parameters, including the amounts of crosslinker (MBA) and comonomer, and swelling values with time, produce results that show excellent correlation with experimental data. The parameters of swelling kinetics and water diffusion mechanisms of the hydrogels were calculated using the obtained experimental data. Model analysis indicated that the ANN models could accurately describe complex swelling behaviors of highly swellable hydrogels.     

Property and Application of BACy‐Based Functional Hydrogels

Conventional polyacrylamide hydrogels prepared from the free radical polymerization between acrylamide and N,N′‐methylenebisacrylamide (NMBA) have been frequently used in the biochemical technique like the sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS‐PAGE) to resolve protein mixtures. In this study, we have prepared an alternative polyacrylamide hydrogel from the cross‐linking of acrylamide and N,N′‐bisacrylylcystamine (BACy). In addition, we have compared the BACy‐based hydrogel with the NMBA‐based polyacrylamide hydrogel for their physical properties such as swelling ratio, shear modulus, crosslink density and morphology. Moreover, we further determined whether BACy‐based polyacrylamide hydrogel could be applied to SDS‐PAGE and proteomics research. The results showed that this type of hydrogel is capable of separating proteins and facilitates further in‐gel protein digestion and the following protein identifications by mass spectrometry. In summary, our study provides a basis for the putative application of BACy‐based hydrogels.     

Preparation of a Cu(II)‐Immobilized Co‐polymer(CIC) for Effective Removal of Urea

The study describes the preparation of Cu(II)‐immobilized copolymer(CIC) under optimum conditions for the effective removal of urea. The copolymeric hydrogels, synthesized by free‐radical aqueous copolymerization of monomers acrylamide and sodium acrylate, have been analyzed for their Cu(II) uptake behavior. The sorption of Cu(II) into polymer follows a Langmuir–type pattern and amount sorbed depends upon the composition of copolymeric gels, presence of other co‐ions in the solution, pH of the solution, initial concentration of sorbate, degree of crosslinking of the copolymeric hydrogel, temperature of the solution etc. In the preliminary study, the Cu(II) immobilized co‐polymer(CIC) sorbent demonstrated a fair tendency to remove urea from aqueous solutions.     

Superswelling of Hydrogels Based on the Copolymer of Acrylamide and Methacrylic Acid

Weakly crosslinked hydrogels of copolymers of acrylamide and methacrylic acid are synthesized by radical polymerization in aqueous solution in a wide range of comonomer ratios. It is found that gels containing 20–40 mol % methacrylic acid are characterized by superswelling that exceeds the degree of swelling of homopolymer hydrogels by tens of times. The observed degree of swelling reaches 830, corresponding to an almost completely stretched conformation of subchains between network junctions. For dried hydrogel samples, the equilibrium degree of swelling is also maximal in the mentioned composition range; however, its maximum value is lower than the equilibrium degree of swelling for the initial samples. The possible reason behind the superswelling of hydrogels containing 20–40% units of methacrylic acid is an increase in ionization of network subchains. This hypothesis is proved by an increased sensibility of hydrogels of this composition to a change in the pH of a medium and the lowest values of the effective acidity constant determined by potentiometric titration for methacrylic acid units. The values of partial heat capacity of a gel polymer network are determined by calorimetry. These values are significantly higher than the heat capacities typical of vinyl polymers. This is evidence that the hydrophobic type of hydration predominates in the copolymers of acrylamide and methacrylic acid. The partial heat capacity reaches its maximum within the copolymer composition range corresponding to superswelling.     

Introduction of pH‐sensitivity into mechanically strong nanoclay composite hydrogels based on N‐isopropylacrylamide

pH‐sensitive nanoclay composite hydrogels based on N‐isopropylacrylamide (NIPA) were synthesized by copolymerization with cationic and anionic comonomers. Laponite nanoclay particles served as multifunctional crosslinkers, producing hydrogels with exceptionally high mechanical strengths, as measured by elongation at break. Cationic copolymer gels based on NIPA and dimethylaminoethylmethacrylate were prepared by aqueous free radical polymerization, adopting a procedure reported by Haraguchi (Adv Mater 2002, 14, 1120–1124). Without modification, this technique failed to produce anionic copolymer gels of NIPA and methacrylic acid (MAA), due to flocculation of clay particles. Three methods were conceived to incorporate acidic MAA into nanoclay hydrogels. First, NIPA was copolymerized with sodium methacrylate under dilute conditions, producing hydrogels with good pH‐sensitivity but weak mechanical characteristics. Second, NIPA was copolymerized with methyl methacrylate, which was then hydrolyzed to generate acid sidegroups, yielding hydrogels that were much stronger but less pH sensitive. Third, NIPA was copolymerized with MAA following modification of the nanoclay surface with pyrophosphate ions. The resulting hydrogels exhibited both strong pH‐sensitivities at 37 °C and excellent tensile properties. Optical transparency changed during polymerization, depending on hydrophobicity of the components. This work increases the diversity and functionality of nanoclay hydrogels, which display certain mechanical advantages over conventionally crosslinked hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6630–6640, 2008     

Thermosensitive molecularly imprinted hydrogel cross‐linked with N‐malely chitosan for the recognition and separation of BSA

A novel temperature‐sensitive molecularly imprinted hydrogel composed of N‐isopropylacrylamide and acrylamide has been prepared by using free‐radical polymerization and was cross‐linked by modified water‐soluble N‐maley chitosan in aqueous solution. BSA (pI 4.9, MW 66.0 kDa) was used as the template protein. The produced hydrogels were characterized by environmental SEM to reveal the microcosmic morphology. A microporous structure was only found in the imprinted hydrogel, while no obvious microporous structure was found in nonimprinted hydrogels. The lower critical solution temperature of the hydrogels was 34°C, and the optimal binding conditions were tested, namely, the adsorption equilibrium time of 6 h and initial BSA concentration of 1.0 mg/mL. The adsorption capacity Q_max was determined by Langmuir isotherm plots and was 5.72 mg/g for imprinted hydrogel and 1.18 mg/g for nonimprinted hydrogels. A separation factor (β) of 4 was obtained when bovine hemoglobin (pI 6.9, MW 64.0 kDa) was selected as the particular reference protein. Molecular weights and pIs were chosen to investigate the selectivity of the hydrogels. It was shown that the shape memory and the size effect were the major factors for the recognition. This imprinted hydrogel was used to specifically adsorb the BSA from the protein mixture.     

Synthesis and Properties of Poly(AAm‐KMA‐MA) Hydrogels

In this investigation, poly(acrylamide‐co‐potassium methacrylate‐co‐maleic acid) hydrogels, poly(AAm‐KMA‐MA) were synthesized by redox copolymerization in aqueous solution. The effect of reaction parameters, such as concentration of maleic acid, crosslinking agent, initiator and activator, on the swelling behavior was investigated in detail. The swelling/diffusion characteristics were also evaluated for 1,4‐butanediol diacrylate (BDDA) and 1,2‐ethyleneglycol dimethacrylate (EGDMA) crosslinked hydrogels having different amounts of maleic acid. The results indicate that the water diffusion of hydrogels was of a non‐Fickian type. The hydrogels were characterized by IR spectroscopy and thermogravimetric analysis (TGA). Their surface characteristics were observed by using scanning electron microscopy (SEM). Furthermore, their swelling phenomena in different pH and salt solutions and simulated biological fluids was also studied.     

离子键交联聚两性电解质凝胶在电场作用下的溶蚀现象

以丙烯酸(AA)和甲基丙烯酸二乙氨基乙酯(DEAM)形成的离子复合物和丙烯酰胺(AAm)为单体,采用自由基聚合制备了一系列新型的离子键交联聚两性电解质凝胶(PADA凝胶).非接触直流电场的实验表明,该离子键交联的PADA凝胶在电场下发生溶蚀现象,该现象鲜见文献报道.PADA凝胶的溶蚀速率与电场强度、溶液浓度、pH值、酸碱基团摩尔比、溶液离子价态等诸多因素有关,如溶蚀随电压的升高而增大,随盐溶液浓度的加大而增大.其溶蚀动力学研究表明PADA凝胶的溶蚀度随时间线性的增加,即溶蚀速率在整个实验时间内基本保持恒定.     

Network structure and swelling behavior of poly(acrylamide/crotonic acid) hydrogels in aqueous salt solutions

Hydrogels with various ionic group contents were prepared from acrylamide and crotonic acid (CrA) monomers with 0–12.9 mol % CrA in aqueous solutions by radiation‐induced polymerization and gelation with γ rays from a ⁶⁰Co source. The volume swelling ratio of the poly(acrylamide/crotonic acid) hydrogels was investigated as a function of the pH and ionic strength of the swelling medium and the type of counterion in the swelling medium. The volume swelling ratio increased with an increase in pH and a decrease in the ionic strength. The volume swelling ratio of these hydrogels was evaluated with an equation, based on the Flory–Huggins thermodynamic theory, the James–Guth phantom network theory, and the Donnan theory of swelling of weakly charged ionic gels, that was modified here for the determination of the molecular weight between crosslinks (M_c) and the polymer–solvent interaction parameter (χ). The modified equation described very well the swelling behavior of the charged polymeric network. The same equation also provided the simultaneous measurement of these parameters for the systems investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1656–1664, 2003     

In vitro swelling studies in simulated physiological solutions and biocompatibility of NIPAM-based hydrogels with some biochemical parameters of human sera

In modern medicine, commonly used biomaterials originating from metals, ceramics and polymers have shown biocompatibility with blood, tissues, cells, etc., in the human body. Polymeric biomaterials are usually understood as polymeric materials and articles made from them which are used in medicine, biotechnology biomedicine, bioengineering, pharmaceutical, veterinary, food industry, agriculture and related fields. In this in vitro study, swellings and the biocompatibility of environmentally sensitive N-isopropyl acrylamide-based (ES) hydrogels such as N-isopropyl acrylamide/acrylamide (ES/0), and N-isopropyl acrylamide/acrylamide/ carboxylic acids (ES/XAc) prepared by free radical polymerization in aqueous solutions has been investigated. Selected carboxylic acids for this study were acrylic, methacrylic, crotonic, itaconic, maleic, mesaconic and aconitic acid. The equilibrium swelling of the hydrogels are investigated in simulated physiological fluids or crystalloid solutions such as HCl-KCl buffer (pH = 1.1), universal buffer (pH = 5.5), phosphate buffer (pH = 7.4), urea, isotonic NaCl, isotonic KCl, 5% dextrose, 5% dextrose+isotonic NaCl, Ringer's lactate, human blood serum and human serum albumin solution at 37°C. For the analysis of biocompatibility, ES hydrogels are incubated in 5 different human sera and their biocompatibilities with some biochemical parameters have been investigated for 24 h at 37°C. No significant differences in values before and after the test procedures have been found. It is therefore concluded that environmentally sensitive N-isopropyl acrylamide-based hydrogels are biocompatible for biochemical parameters of human sera.     

Conducting hydrogels based on semi‐interpenetrating networks of polyaniline in poly(acrylamide‐co‐itaconic acid) matrix: synthesis and characterization

In this work, acrylamide/itaconic acid copolymeric hydrogels are prepared by free radical polymerization initiated by redox initiators of potassium persulfate and N ,N ,N ′,N ′‐tetramethyl ethylene diamine; N ,N ′methylene bisacrylamide was employed as a crosslinking agent. Aniline monomer was absorbed in the network of poly(acrylamide‐co‐itaconic acid) P(AAm‐co‐IA) hydrogel and followed by gamma radiation induced polymerization at room temperature. The novel semi‐interpenetrating network was comprised of linear polyaniline immersed in P(AAm‐co‐IA) matrix. Electrical conductivity of the hydrogels was measured using four‐probe technique. The conductivities for the prepared hydrogels are found to increase from 5.5 × 10^?7 S cm^?1 for P(AAm‐co‐IA) alone to 4.4 × 10^?3 S cm^?1 for semi‐interpenetrating polymer network P(AAm‐co‐IA)/polyaniline. Thus, a new composite hydrogel with good conductive properties also displaying enhanced mechanical strength and pH sensitivity was prepared. Copyright © 2017 John Wiley & Sons, Ltd.     

Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

Swelling equilibria and dye adsorption studies of chemically crosslinked superabsorbent acrylamide/maleic acid hydrogels

Superswelling acrylamide (AAm)/maleic acid (MA) hydrogels were prepared by free radical polymerization in aqueous solution of AAm with MA as comonomer with some multifunctional crosslinkers such as trimethylolpropane triacrylate and 1,4-butanediol dimethacrylate. AAm/MA hydrogels were used in experiments on swelling and adsorption of a water-soluble monovalent cationic dye such as Basic Blue 17 (Toluidin Blue). As a result of dynamic swelling tests, the influence of relative content of MA on the swelling properties of the hydrogel systems was examined. AAm/MA hydrogels were swollen in the range 1660-6050% in water, while AAm hydrogels swelled in the range 780-1360%. Equilibrium water content of AAm/MA hydrogels were calculated in the range 0.8873-0.9837. Water intake of hydrogels followed a non-Fickian type diffusion. The uptake of the cationic dye, BB-17 to AAm/MA hydrogels is studied by batch adsorption technique at 25 °C. In the experiments of the adsorption equilibrium, S-type adsorption in Giles's classification system was found. The binding ratio of hydrogel/dye systems was gradually increased with the increase of MA content in the AAm/MA hydrogels.     

Swelling behavior of poly{N‐[3‐(dimethylaminopropyl)] methacrylamide‐co‐acrylamide} hydrogels in aqueous solutions of surfactants

Temperature sensitive poly{N‐[3‐(dimethylaminopropyl)]methacrylamide‐co‐acrylamide} [P(DMAPMA‐co‐AAm)] hydrogels were prepared by the free‐radical crosslinking copolymerization of corresponding monomers in water with N,N‐methylenebisacrylamide as the crosslinker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylethylenediamine as the activator. The swelling equilibrium of the P(DMAPMA‐co‐AAm) hydrogels was investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate and the cationic surfactant dodecyltrimethylammonium bromide. In pure water, regardless of the amount of N,N‐methylenebisacrylamide, the P(DMAPMA‐co‐AAm) hydrogels showed a discontinuous phase transition between 30 and 36 °C. However, the transition temperature changed from discontinuous to continuous with the addition of surfactants; this was ascribed to the conversion of nonionic P(DMAPMA‐co‐AAm) hydrogels into polyelectrolyte hydrogels due to the binding of surfactants through hydrophobic interactions. Additionally, the concentrations of free sodium dodecyl sulfate and dodecyltrimethylammonium bromide ions were measured at different temperatures by conductometry, and it was found that the electric conductivity of the P(DMAPMA‐co‐AAm)–surfactant systems depended strongly on the swelling ratio; most notably, it changed drastically near the phase‐transition temperature of the P(DMAPMA‐co‐AAm) hydrogel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1645–1652, 2006